| 1 | 1 | Removing existing aluminium partition made up with gall, partial board and fixing the removed aluminium partition, glass and partial boards as per requirement and direction of Engineer in charge. | | 268 | Sqm |
|---|
| 2 | 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, luminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portionPowder coated luminium (minimum thickness of powder coating 50 micron)For fixed portion | | 230 | Kg |
|---|
| 3 | 3 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators ncluding providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | | 30 | Kg |
|---|
| 4 | 4 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness | | 85 | Sqm |
|---|
| 5 | 5 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on both sides | | 45 | Sqm |
|---|
| 6 | 6 | Providing and Fixing frosted adhesive-backed film with decorative pattern. | | 45 | Sqm |
|---|
| 7 | 7 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | | 6 | Nos |
|---|
| 8 | 8 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar | | 12 | Nos |
|---|
| 9 | 9 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete | | 6 | Nos |
|---|
| 10 | 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) | | 16 | cum |
|---|
| 11 | 11 | 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) | | 137 | Sqm |
|---|
| 12 | 12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | | 333 | Sqm |
|---|
| 13 | 13 | Distempering with oil bound washable distemper of approved brand\nand manufacture to give an even shade :\n New work (two or more coats) over and including water\nthinnable priming coat with cement primer | | 333 | Sqm |
|---|
| 14 | 14 | Providing and laying in position cement concrete of specified grade\nexcluding the cost of centering and shuttering - All work up to plinth 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)\nlevel : | | 3 | cum |
|---|
| 15 | 15 | Centering and shuttering including strutting, propping etc. and removal\nof form for Lanter, Bean | | 16 | Sqm |
|---|
| 16 | 16 | Steel reinforcement for R.C.C. work including straightening, cutting,\nbending, placing in position and binding all complete upto plinth level. | | 121 | Kg |
|---|
| 17 | 17 | Providing fixing thermal insulation of ceiling (under deck insulation)\nwith Resin Bonded Fibre glass wool conforming to IS : 8183, density\n24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags,\nfixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire\nmesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of\nbuilding. | | 99 | Sqm |
|---|
| 18 | 18 | VITRIFIED FLOOR TILES\n Providing and laying vitrified floor tiles in different sizes (thickness to be\nspecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | | 205 | Sqm |
|---|
| 19 | 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with\nclamps at 1.00 m spacing. This includes jointing of pipes & fittings\nwith one step CPVC solvent cement and testing of joints complete Concealed work, including cutting chases and making good the walls etc. as per direction of Engineer in Charge. 25 mm dia pipe | | 20 | RMT |
|---|
| 20 | 20 | 40 mm nominal outer dia Pipes | | 5 | Rmt |
|---|
| 21 | 21 | Providing and fixing gun metal gate valve with C.I. wheel of approved\nquality (screwed end) : 25 mm nominal outer dia Pipes | | 4 | nos |
|---|
| 22 | 22 | for 40 mm nominal outer dia Pipes | | 2 | nos |
|---|
| 23 | 23 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931\n18.53.1 15mm nominal bore | | 3 | nos |
|---|
| 24 | 24 | Providing and fixing long body brass bib cock of approved quality | | 2 | Nos |
|---|
| 25 | 25 | Providing and fixing on wall face Drainage water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm Dia HDPE pipe | | 20 | Rmt |
|---|
| 26 | 26 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) | | 80 | Sqm |
|---|
| 27 | 27 | Kota stone slab flooring over 20 mm (average) thick base laid over and\njointed with grey cement slurry mixed with pigment to match the shade\nof the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick | | 6 | Sqm |
|---|
| 28 | 28 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass\npillar taps, 32 mm C.P. brass waste of standard pattern, including\npainting of fittings and brackets, cutting and making good the walls\nwherever require White Vitreous China Wash basin size 630x450 mm with\na pair of 15 mm C.P. brass pillar taps | | 2 | nos |
|---|
| 29 | 29 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade area of slab above 0.50Sqm | | 4 | Sqm |
|---|
