Invitation Of Bids For Provision Of Rcc Foundation For Installation Of Ndb Antenna And Assembling , Erection Of Ndb Antenna- Ins Hansa, BASE ELECTRICAL DEPARTMENT - INS HANSA, DABOLIM-Goa

Invitation Of Bids For Provision Of Rcc Foundation For Installation Of Ndb Antenna And Assembling , Erection Of Ndb Antenna- Ins Hansa , Dismantling & Handing Over Of Existing Towers And Antenna To The Other Customer At Ins Hansa , Dismantling & Handing Over Of Existing Atu To The Customer At Ins Hansa , Site Clearing , Cutting Of Any Trees , Plants , Unwanted Vegetation Etc . , Assembling Of Tower With All Necessary Components As Per Detailed Drawing At Ins Hansa , Complete All As Specified And Directed By Engr-In-Charge . , Fixing Of Jumper Wire , Guy Wire Ropes With All Necessary Components As Per Detailed Drawing At Ins Hansa , Complete All As Specified And Directed By Engr-In-Charge . , Raising , Erecting And Hoisting Of Assembled Antenna Into Position Required With Mounting Of Solar Panel Into Position And Atu Rack Installation In Position , Including Aviation Lamp Fixing And Laying The Cable Through Steel Flexible Pipe As Per Drawing At Ins Hans , Complete All As Specified And Directed By Engineer In-Charge . , Mounting Of Solar Pannel Into Required Position And Atu Rack Installation In Position , Including Aviation Lamp Fixing And Laying The Cable Through Steel Flexible Pipe Required As Per Drawing At Ins Hansa Complete All As Specified And Directed By Engr-In-Charge . , Fixing And Laying Of Copper Radials In Below Ground Level . , Trenching And Provisioning Of And Laying Of Pvc Pipe For Power Cable Between Transmitter Room And Tower , Provision Of Chemical Earth Pits With Copper Material Including Construction Of Chambers And Cast Iron Covers . , Excavating In Trenches , N . Exc 1 . 5M Wide And N . Exc 1 . 5 In Depth For Foundation Etc , Or For Shafts , Wells , Cesspits , Manholes , Pier Holes , Etc , N . Exc 10 Sqm On Plan And N . Exc 1 . 5 In Depth And Getting Out In Soft/Loose Soil Complete All As Specified And Directed By Engr-In-Charge . , Material And Labour Charge For Hardcore Of Gauge N . Exc 63Mm , Deposited , Spread And Leveled In Layers N . Exc 15Cm Thick , Watered And Rammed To A True Surface Complete All As Specified And Directed By Engr-In-Charge . , Material And Labour For Formwork To Curved Surface Sides Fo Concrete Foundations , Footings , Bases Of Coloums , Raft And Raft Beams , Sides And Soffits ( If Any ) Of Foundation And Plinth Beams , And Similar Work , Vertical Oa To Better With Rough Finished Surface Complete All As Specified And Directed By Engr-In-Charge . , Material And Labour For Rcc 1:1:5:3 Ratio In Foundations , Including Rafts , Footings , Bases For Columns , Etc Mass Concrete Complete All As Specified And Directed By Engr-In-Charge . Note: Water Has To Be Arranged By The Contractor For Civil Work . The Price Quoted In Inclusive Of This . , Returning , Filling In , Including Spreading , Leveling , Watering And Well Ramming In Layers N . Exc 25Cm In Soil Complete All As Specified And Directed By Engr-In-Charge . , Material And Lobour For Tmt Bars 10Mm Dia And Over , Cut To Length , Bent To Shape Required , Including Cranking , Bending Spirally For Hooping For Columns , Hooking Ends And Binding With The Including Mild Steel Wire ( Annealed ) Not Less Than 0 . 9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge . , Removing Excavated Material Exc 50M And N . Exc 250M Depositing Where Directed At A Level N . Exc 1 . 5M Above The Starting Point Etc , Complete All As Specified And Directed By Engr-In-Charge .

Refer document

INR 60000.0 /-

Refer document

Name of Work: PROVISION OF RCC FOUNDATION FOR INSTALLATION OF NDB ANTENNA & ASSEMBLING, ERECTION OF NDB ANTENNA
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1.1	Dismantling & Handing over of Existing Towers and antenna to the other Customer at INS Hansa	Item 1.1	3	Nos
2	1.2	Dismantling & Handing over of Existing ATU to the customer at INS Hansa	Item 1.2	1	Nos
3	1.3	Site clearing, cutting of any trees, plants, unwanted Vegetation etc.	Item 1.3	1	Job
4	1.4	Assembling of tower with all necessary components as per detailed drawing at INS Hansa, complete all as specified and directed by Engr-in-charge.	Item 1.4	1	Job
5	1.5	Fixing of jumper wire, guy wire ropes with all necessary components as per detailed drawing at INS Hansa, complete all as specified and directed by Engr-in-charge.	Item 1.5	1	Job
6	1.6	Raising, Erecting and hoisting of assembled antenna into position required with mounting of solar panel into position and ATU Rack installation in position, including Aviation Lamp fixing and laying the cable through steel flexible pipe as per drawing at INS Hans, complete all as specified and directed by engineer in-charge.	Item 1.6	1	Job
7	1.7	Mounting of solar pannel into required position and ATU rack installation in position,including aviation lamp fixing and laying the cable through steel flexible pipe required as per drawing at INS Hansa complete all as specified and directed by Engr-in-charge.	Item 1.7	1	Job
8	1.8	Fixing and laying of Copper radials in below ground level.	Item 1.8	1	Job
9	1.9	Trenching and provisioning of and laying of PVC pipe for power cable between transmitter room and tower	item 1.9	65	Mtrs
10	2	Provision of chemical earth pits with copper material including construction of chambers and cast iron covers.	item 1.10	3	Nos
11	2.1	Excavating in trenches, n.exc 1.5m wide and n.exc 1.5 in depth for foundation etc, or for shafts,wells,cesspits,manholes,pier holes,etc, n.exc 10 sqm on plan and n.exc 1.5 in depth and getting out in soft/loose soil complete all as specified and directed by Engr-in-charge.	Item 2.1	90	CUM
12	2.2	Material and labour charge for hardcore of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-charge.	Item 2.2	14	CUM
13	2.3	Material and labour for formwork to curved surface sides fo concrete foundations, footings, bases of coloums, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical oa to better with rough finished surface complete all as specified and directed by Engr-in-charge.	Item 2.3	62	SQMM
14	2.4	Material and labour for RCC 1:1:5:3 Ratio in foundations, including rafts, footings, bases for columns, etc mass concrete complete all as specified and directed by Engr-in-charge. Note: Water has to be arranged by the contractor for civil work. The price quoted in inclusive of this.	Item 2.4	15	CUM
15	2.5	Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm in soil complete all as specified and directed by Engr-in-charge.	Item 2.5	70	CUM
16	2.6	Material and lobour for TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-charge.	Item 2.6	1200	KG
17	2.7	Removing excavated material exc 50m and n.exc 250m depositing where directed at a level n.exc 1.5m above the starting point etc, complete all as specified and directed by Engr-in-charge.	Item 2.7	27	CUM