Jharia Rehabilitation And Development Authority has published Development Work Of Phase Vi Vii And Viii At Visthapit Awas Belgoria Dhanbad. Submission Date for this Tender is 16-04-2021. Civil Work Tenders in Phase VI VII and VIII at Visthapit Awas Belgoria D Jharkhand. Bidders can get complete Tender details and download the document.
| Name of Work: DEVELOPMENT WORK OF PHSE VI, VII & VIII AT VISTHAPIT AWAS AT BELGORIA, DHANBAD | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of sail item (A) and disposal of excavated earth as optained to a distance upto 50M including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and directin of E/I and extra for earthwork in hard sail as per specification and direction of E/I | BI01010001010000000000000515BI0100001112 | 100416 | cum |
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock | BI01010001010000000000000515BI0100001113 | 700 | cum |
| 3 | 3 | Filling infoundation trenches and plenth in layers not exceeding 150 …….. | BI01010001010000000000000515BI0100001114 | 12575 | cum |
| 4 | 4 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | BI01010001010000000000000515BI0100001115 | 18761.3 | mtr |
| 5 | 5 | Providing coarse clean sand in filling in foundation trenched or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I | BI01010001010000000000000515BI0100001116 | 6966.97 | cum |
| 6 | 6 | Providing PCC M-75 with nominal mix of (1:4:8) in foundation with approved quality of stone metal grase - III (50 mm to 25 mm ) size clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing, cemtn concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I | BI01010001010000000000000515BI0100001117 | 10348.4 | cum |
| 7 | 7 | Providing designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I | BI01010001010000000000000515BI0100001118 | 18572.2 | cum |
| 8 | 8 | Providing RCCM 150 with nominal mix of (1:2:4) in foundation | BI01010001010000000000000515BI0100001119 | 454.61 | cum |
| 9 | 9 | Providing RCC 150 with nominal mix of (1:2:4) in column ……………… | BI01010001010000000000000515BI0100001120 | 182.11 | cum |
| 10 | 10 | Providing RCC 150 with nominal mix of (1:2:4) in band in plinth level ……………… | BI01010001010000000000000515BI0100001121 | 268.41 | cum |
| 11 | 11 | Providing DPC 25 mm thick (1:2:4) …………….. | BI01010001010000000000000515BI0100001122 | 60.18 | sqm |
| 12 | 12 | Providing designation 100A brick work with fly ash lime brick (FLAG) conferming to IS 12894-1990 (9"x4.5"x3") in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I | BI01010001010000000000000515BI0100001123 | 905.47 | cum |
| 13 | 13 | Providing RCCM-150 with nominal mix of (1:2:4) in lintel with approved quality of stone ships 20 mm to 6 mm. size graded and clean coarse sand of FM 2.5 to 3 including screening, centering, shuttering, mixing and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete, as per building specification and direction of E/I | BI01010001010000000000000515BI0100001124 | 36.31 | cum |
| 14 | 14 | Providing RCC 150 with nominal mix of (1:2:4) in band in lintle level ……………… | BI01010001010000000000000515BI0100001125 | 141.99 | cum |
| 15 | 15 | Providing RCCM-150 with nominal mix of (1:2:4) in roof slab with approved quality of stone ships 20 mm to 6 mm. size graded and clean coarse sand of FM 2.5 to 3 including screening, centering, shuttering, mixing and placing in position, vibrating, striking, | BI01010001010000000000000515BI0100001126 | 690.57 | cum |
| 16 | 16 | Providing av 63 mm thick RCCM - 200 with nominal mix of (1:1.5:3) chajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including making drip coarse in concrete, screening, centering, shuttering and mixing cement concrete in mixer and placing in position, vibrating, stricking, 6 mm cement plaster (1:4) in ceiling and sides of chajja with sand of FM 1.5 curing (but excluding the cost of reinforcement) taxes and royalty all complete as per builidng specification and direction of E/I | BI01010001010000000000000515BI0100001127 | 18.68 | sqm |
| 17 | 17 | Providing RCC M 150 with nominal mix of (1:2:4) in precast RCC Slab | BI01010001010000000000000515BI0100001128 | 180.29 | cum |
| 18 | 18 | Providing 150 mm wide brick drain in cement mortar (1:6) with av. 150 mm clear depth and 125 mm apron including cost of earthwork involved with 75 mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duty plastered in CM (1:3) with punning over exposed surface all complete as per building specification and direction of E/I | 31500 | mtr | |
| 19 | 19 | Making plinth protection 50 mm thick of cement concrete (1:3:6) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and grouted with fine sand, including finishing the top smooth. | 27137.3 | sqm | |
| 20 | 20 | Preparation and consolidation of sub grade ….. | 68400 | sqm | |
| 21 | 21 | Cement concrete (1:2:4) in pavement main ….. | 8880 | cum | |
| 22 | 22 | a) Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | 4560 | sqm | |
| 23 | 23 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | 489.91 | cum | |
| 24 | 24 | Providing RCCM-200 with nominal mix of (1:1.5:3) in columns with approved quality of stone ships 20 mm to 6 mm. size graded and clean coarse sand of FM 2.5 to 3 including screening, centering, shuttering, mixing and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete, as per building specification and direction of E/I | 230.57 | cum | |
| 25 | 25 | Reinforced cement concrete work in walls (any thickness), including attached plasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 320.73 | mtr | |
| 26 | 26 | Providing RCCM-200 with nominal mix of (1:1.5:3) in beam of all types with approved quality of stone ships 20 mm to 6 mm. size graded and clean coarse sand of FM 2.5 to 3 including screening, centering, shuttering, mixing and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete, as per building specification and direction of E/I | 177.64 | cum | |
| 27 | 27 | Providing RCCM-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone ships 20 mm to 6 mm. size graded and clean coarse sand of FM 2.5 to 3 including screening, centering, shuttering, mixing and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete, as per building specification and direction of E/I | 259.39 | cum | |
| 28 | 28 | e) Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | 3120.96 | sqm | |
| 29 | 29 | Extra for shuttening in circular work ……………… | 3120.96 | sqm | |
| 30 | 30 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars | 394877 | kg | |
| 31 | 31 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 17840 | kg | |
| 32 | 32 | Providing G.I. Pipe hand rails with 40 mm G.I. pipe of I.T.C. or equivalent make properly fitted and fixed in position to rail posts with all necessary accessories and taxes all complete, as per building specification and direction of E/I. | 1200 | mtr | |
| 33 | 33 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded\nstone aggregate 20 mm nominal size) as per standard design : With 20 mm diameter round bar | 2505 | each | |
| 34 | 34 | Providing and laying Double Flanged (Screwed / Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 : 150 mm dia Ductile Iron Double Flanged | 570 | mtr | |
| 35 | 35 | Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 : Up to 600 mm dia | 70 | Qtl | |
| 36 | 36 | Providing on fixing fan hook of 16 mm dia MS bar 1 meter long bent to required size and shape placed in position and fixed in RCC slab/beam at the time of casting all complete as per building specification and direction of E/I | 24 | Each | |
| 37 | 37 | Supply fitting and fixing M.S. Grill of 20x6 mm M.S. flat as per approved design and drawing properly fabricated with joints continuous fillet welded and finished smooth carriage to grill to work size hosting as per building specification and direction of E/I | 200 | Kg | |
| 38 | 38 | Structural steel work riveted, bolted or welded in built ………….. | 1700 | kg | |
| 39 | 39 | Providing 25 mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layers 6 mm thick (1:2) with 6 mm down stone chip in panels including cost of curing finishing the surface smooth by rubbing with carborandum stone taxes and royalty with all complete as per building specification and direction of E/I | 14477.7 | sqm | |
| 40 | 40 | Provinding 12mm thick plaster (1:4)…. | 35954.2 | sqm | |
| 41 | 41 | Providing 1.5 cement punning including curing carriage of water with all leads and lifts as per building specification and direction of E/I | 37171.6 | sqm | |
| 42 | 42 | Providing 12 mm thick cement plaster 1:6 with clean coarse sand F.M. 1.5 including screening, curring with all leads and lifts of water. | 27336.6 | sqm | |
| 43 | 43 | Provinding 6 mm thick cement plaster (1:4) | 14461.3 | sqm | |
| 44 | 44 | Providing 12 mm thick plaster (1:3) with clear coarse sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E/I | 73.5 | sqm | |
| 45 | 45 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all complete as per building specification and direction of E/I | 271.59 | sqm | |
| 46 | 46 | Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surcade including preparing the plastered surface smooth wirth sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/I | 28114.1 | sqm | |
| 47 | 47 | White washing three coats over new surface throughly and removing the scales of smoke and mosh marks with jhama rubbing scaffolding washing of floors and taxes all complete as per building specification and direction of E/I | 780.6 | sqm | |
| 48 | 48 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | 6658 | per 50 kg of cement | |
| 49 | 49 | Providing PCCM 150 in foundation ……………. | 211.2 | cum | |
| 50 | 50 | Providing and Laying non presure and NP-3 class… dia 1200 | 60 | per metre | |
| 51 | 51 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete 150 mm diameter. | |||
| 52 | 51.01 | a) 150 mm dia | 6012 | mtr | |
| 53 | 52 | Providing and Laying PCC all around 150 mm dia SW pipe | 5511 | mtr | |
| 54 | 53 | Provinding and fitting soil vent pipe 75 mm dia ……. | 916.83 | mtr | |
| 55 | 54 | Provinding and fitting sand cast iron terminal guard 75 mm dia …. | 501 | each | |
| 56 | 55 | Cost of drilling 200 mm x 150 mm x125 meter deep borewell in all kinds of soil and rock in rural or any other area for installation of pump set with Hydraulic DTH Rig machine all complete including supplying all materials tools drilling rig and Air compressor and eqwuipments as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site including cost of flushing charges, Geological investigation etc. all complete. | |||
| 57 | 55.01 | (i) From 0-50 meter | 800 | mtr | |
| 58 | 55.02 | (ii) From 50-200 meter onwards | 2400 | mtr | |
| 59 | 56 | Supplying all tools, tackles & lowering of 200 mm dia MS ERW Casing pipe of 6 mm wall thickness including welding charges, cost of pipe etc. including welding charges, cost of pipe etc. including all taxes., VAT, excise duty, freight charges with inspection charges etc. as applicable all complete job. | 480 | mtr | |
| 60 | 57 | Supplying all materals, labours, tool & equipments for fitting & fixing 200 mm dia MS Cap over Casing pipe complete job | 16 | each | |
| 61 | 58 | Drilling in all kinds of soil and rock in rural areas for installation of India Mark-II Hand pump with DTH Rig all complete including supplying all materials, labours, tools, drilling Rig, air compressor and equipment as well as fuel, lubricants for making 125x115 mm dia. Boring & cost of transporting charges of Rig Machine and other vehicles up to site of the work as per specification and direction of E/I | |||
| 62 | 58.01 | Upto 30 mtrs. Depth below G.I. | 6000 | mtr | |
| 63 | 58.02 | Beyond 30 mtrs. Upto 60 mtrs. | 6000 | mtr | |
| 64 | 59 | Supplying all materials, labours, equipments for lowering 125 mm dia, UPVC pipes as casing for protecting the sides from falling during the process of drilling all complete including cutting and threading supplying of 125 mm dia. PUVC casing pipe and its carriage to work site and back to store. | 3000 | mtr | |
| 65 | 60 | Supplying all matrials, labours, cement and calcium chloride or bentonite solution and equipments for grouting to casing pipes after its lowering in the bore with ½ kg. Cement and 2 kg. Bentonite to be used etc. all complete job as per specification and direction of E/I | 200 | mtr | |
| 66 | 61 | Supplying all tools, equipments and labours and doing washing, flushing and development of bore of drilled tube well to give clean and clear water all complete as per direction of E/I | 100 | P/Hr | |
| 67 | 62 | Supplying labour and equipments including 125 mm dia G.I. Cap and fitting and fixing over the tube well properly and taking it out as per direction of E/I ( The cap will be the property of contractor) | 200 | Each | |
| 68 | 63 | Supplying all tools, equipments and labours and lowering 32 mm dia. G.I. suspension pipes (medium class in 3 metres length) in the drilling bore of the tube well etc. all complete job as per direction of E/I | 5600 | mtr | |
| 69 | 64 | Providing labours and equipments for fitting and fixing the deep well cylinder assebly with necessary connecting rods including jointing materials nitrile rubber bucket all tools and plants etc. required for the job for low water level all complete job as per specification and direction of E/I | 200 | Each | |
| 70 | 65 | Providing all labours and equipments for fitting, fixing of deep well hand pump India Mark-II including supplying all tools and plant required for the all job complete as per specification and direction of E/I | 200 | Each | |
| 71 | 66 | Supplying all materials including cement of approved quality, labour, tools for construction 1.85 m. dia. Circular PCC (1:2:4) platform of 17.5 cm (avg.) thickness around India Mark-III hand pump having 10 cm deep cub at the top edge of the platform additional 100 cm x 100 cm x 20 cm deep platform below the handle, including embedding the pedestal of the pump with 76 cm x 76 cm x 40 cm deep PCC (1:2:4) with 20 mm and down size stone chips and local sand of approved quality including 12 mm thick plaster on the exposed surface (1:4) with neat cement punning including doing earth work in excavation, levelling rammng the bed incluing providing necessary shuttering, curing and carriage of materials to different tube well sites etc. all complete job as per standard design of UNICEF and direction of E/I | 200 | Each | |
| 72 | 67 | Supplying tools, labours and mateials for painting numbering an year for construction of T/well and taking of colour photograph with two or three nearest person/location including plateform, drain and also longitude and latitude, details of T/well such as total depth, casing depth, static water level, draw discharge strata chart beneficiary population etc. in separate sheet/format all complete as per directinof E/I | 200 | Each | |
| 73 | 68 | Cost of one no of ISI Marked India Mark II hand pump confirming to IS 15500 (part II)/2004 with amendment No. complete with all accessories including 8 nos. of connecting rod including all taxes, royalty and contractor profit etc. | 200 | Each | |
| 74 | 69 | Cost of 32 mm dia. GI pipe 3 mtrs. Long screwed at both ends with seamiess socket as per IS 1239 (part 1990) including all taxes, royalty and contractor profit etc. | 5600 | mtr | |
| 75 | 70 | Cost of (125 mm dia. 140 mm OD.) Blue UPVC casing pipe. | 3000 | mtr | |
| 76 | 71 | Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 100 mm dia Ductile Iron Class K-7 pipes | 11000 | mtr | |
| 77 | 72 | Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 150 mm dia Ductile Iron Class K-7 pipes | 2100 | mtr | |
| 78 | 73 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket : 100 mm dia pipes | 3000 | joint | |
| 79 | 74 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket : 150 mm dia pipes | 500 | joint | |
| 80 | 75 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge. External work: 4050 (50 mm OD ) pipe | 11250 | mtr | |
| 81 | 76 | Providing and fixing 65 mm dia G.I. pipe for 15 HP Pump …………………….. | 160 | cum | |
| 82 | 77 | Kirloskar Make Pump Model KS6B 0815 Supply of 7. 5HP Submersible Pump Set Discharge 150LPM, Head -120Mtrs Outlet Dia 143mm Outlet Size 50mm No of Stage 15 | 18 | Nos | |
| 83 | 78 | Supply of Submersible Cable PVC Flat with high Insutation 1x3x4 Sqmm | 2560 | Mtrs | |
| 84 | 79 | Supply of Conrtol Panel for 7.5HP submersible Motor pump with Prodless Water Level Controller Single Phase Preventor, Dry Run Protector Over head Relay | 18 | Nos | |
| 85 | 80 | Lowering & FixingCharge for 7.5HP Submersible Pump | 16 | Nos | |
| 86 | 81 | Fixing Charge of Control Panel of 7.5HP Subersible MotorPump | 16 | Nos | |
| 87 | 82 | Kirloskar Make Pump Model KOS1555 Supply of open well Submersible Motor Pump 15 HP HP,S/D 3Phase 50Cy Head -D 65mm. Discharge at 52Meter Head 630LPM52Mtrs S-75mm | 8 | Nos | |
| 88 | 83 | Supply of Conrtol Panel for 15HPopen well submersible Motor pump with Prodless Water Level Controller Single Phase Preventor, Dry Run Protector Over head Relay | 8 | Nos | |
| 89 | 84 | Lowering & FixingCharge for 15HP openwell Submersible Pump | 8 | Nos | |
| 90 | 85 | Fixing Charge of Control Panel of 15 HP Subersible MotorPump | 8 | Nos | |
| 91 | 86 | Supply & Fixing Foot Valve With Stainer suitable as per Suction Pipe of 100mm of brass metal | 8 | Nos | |
| 92 | 87 | Supply of 2" G.I. Pipe ISI Brand | 16000 | fit | |
| 93 | 88 | Supply of 2" G.I. ISI Brand Union | 50 | Nos | |
| 94 | 89 | Elbow | 50 | Nos | |
| 95 | 90 | Long Socket (Heavy) | 300 | Nos | |
| 96 | 91 | Providing and fitting 50 mm dia gun metal non return valve horizontal …………….. | 16 | Nos | |
| 97 | 92 | Cement upto 10 KM | 5513.99 | MT | |
| 98 | 93 | Stone matel | 9488.02 | cum | |
| 99 | 94 | Stone Chips upto 10 KM | 3173.53 | cum | |
| 100 | 95 | Sand upto 35 KM | 20517.2 | cum | |
| 101 | 96 | Bricks upto 10 KM | 8294.56 | per 1000 | |
| 102 | 97 | Wiring for light point/ fan point/ exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc as requiresd. Group A | 55 | each | |
| 103 | 98 | Wiring for circuit/ sumain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2x2.5 sq. mm + 1x2.5 sq. mm earth wire. | 80 | mtr | |
| 104 | 99 | Supplying and fixing metsl box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 200mm x 125mm x 60mm deep | 24 | each | |
| 105 | 100 | Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections etc. as required. 5/6 amps switch. | 48 | each | |
| 106 | 101 | Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections etc. as required. 3 pin 5/6 amp socket outlet. | 24 | each | |
| 107 | 102 | Providing and Fitting C.I. Switch valve class-I | |||
| 108 | 102.01 | 100 mm dia | 3818.5 | each | |
| 109 | 102.02 | 150 mm dia | 5603.14 | each | |
| 110 | 103 | Supplying and fixing brass batten/ angle holder including connection etc. as required. | 50 | each | |
| 111 | 104 | P. and fitting TP&N 32 Amp | 21 | Nos | |
| 112 | 105 | Earthing wire g leanth pipe 4.5 m | 6 | Nos | |
| 113 | 106 | P & F of lightening conductor final | 6 | Nos | |
| 114 | 107 | Providing and fitting G.I tape 20x3 mm on surface | 270 | Nos | |
| 115 | 108 | Renewing fly proof wire netting | 6 | Nos | |
| 116 | 109 | Supply Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required. Above 8.0 metre and upto 11.0 metre | 580 | Each | |
| 117 | 110 | Supply & Erection of stay set complete (galvanised) in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required. | 520 | Each | |
| 118 | 111 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre),cross arm for 4 wire over head complete clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required. | 380 | set | |
| 119 | 112 | Supplying and erection of 75 mm x 90 mm shakle insulator | 490 | set | |
| 120 | 113 | Supplying and erection of 100 mm x 65 mm pin insulator | 1200 | set | |
| 121 | 114 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. | 120 | pcs | |
| 122 | 115 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. | 1200 | Mtr | |
| 123 | 116 | Supplying armour cable | |||
| 124 | 116.01 | a) 3.5 core 50 mm 2 | 800 | mtr | |
| 125 | 116.02 | b) 3.5 core 300 mm 2 | 1100 | mtr | |
| 126 | 116.03 | c) 3.5 core 25 mm 2 | 25000 | mtr | |
| 127 | 116.04 | d) 3.5 core 185 mm 2 | 1000 | mtr | |
| 128 | 117 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required Upto 35 sq. mm | 22500 | mtr | |
| 129 | 118 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required Above 35 sq. mm and upto 95 sq. mm | 600 | mtr | |
| 130 | 119 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required Above 185 sq. mm and upto 400 sq. mm | 500 | mtr | |
| 131 | 120 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground excluding excavation, sand cushioning, protective covering and refilling the trench etc as required Above 185 sq. mm and upto 400 sq. mm | 1000 | mtr | |
| 132 | 121 | Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. | 231 | Each | |
| 133 | 122 | Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. | 45 | Each | |
| 134 | 123 | Aluminium lugs for 300 square cable | 260 | Each | |
| 135 | 124 | Supplying and Installation 100 amp. TP & N Switch415/500 with disconnector fuse unit rewireable type V including connection etc required makes Havell or Anchor | 500 | Each | |
| 136 | 125 | Supplying and Installation 100 amp, 415V, Heavy duty three phase with neutral Busbar chamber bus bar chamber 4 strips made of aluminium a long and connection etc as per required earthing eth body etc. makes Havell or Anchor | 500 | Each | |
| 137 | 126 | Supplying ACSR rabit conductor Lagging and sagging of ACSR Conductor | 64000 | Mtr | |
| 138 | 127 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. | 168 | Set | |
| 139 | 128 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. | 300 | Each | |
| 140 | 129 | Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. | 252 | Set | |
| 141 | 130 | S/F MS channel for suporting 11 kva AB Switch | 80 | Each | |
| 142 | 131 | S/F 11 kva switch 630 Amp 3 pin type | 20 | Set | |
| 143 | 132 | Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. | 20 | Set | |
| 144 | 133 | Supplying 400 amp TPN HRC fuse | 20 | Each | |
| 145 | 134 | Supplying Bus Bar Chamber 500 AMP | 20 | Each | |
| 146 | 135 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. | 80 | Set | |
| 147 | 136 | Salt/Charcoal for plate earth electrode\nExtra for using salt and charcoal for GI or Copper plate earth electrode as required. | 80 | Set | |
| 148 | 137 | Making plateform with 1st class bricks (75a) for 315 KVA transfermer in (1:6) cement mortar etc 3m x 1.5m x 1.5 m = 6.75 cum | 135 | cum | |
| 149 | 138 | RCC (1:2:4) in roof slab (20x2.10x1.50x0.1) | 6.3 | cum | |
| 150 | 139 | Reinforcement for RCC Work | 500 | kg | |
| 151 | 140 | 12 mm thick cement plastere in (1:6) etc. | 208 | sqm | |
| 152 | 141 | HT Fuse Horn gap for 11 KV subs….. 11 KV subs 3 Pic x5 | 120 | Each | |
| 153 | 142 | Supply MSL 90 W/H street light LED make Masket MESCAB | 500 | Each | |
| 154 | 143 | Supplying drawing 2 x 1.5 sq. mm PVC insulated cable for connection of sodium vapour lamp | 580 | mtr | |
| 155 | 144 | 11 KV DP Cross bracing | 32 | set | |
| 156 | 145 | Providing & fixing 25mm X 5mm G.I. Stripe for earthning connection | 800 | mtr | |
| 157 | 146 | HT 3 Core Power Cable 11KV, 240 sq. mm. | 300 | mtr | |
| 158 | 147 | 4 pole MCCB 630A 50 KA | 20 | Each | |
| 159 | 148 | Supplying and making indoor cable end jointing with cast resin compound including lugs and other jointing materials for following size of 3 core, XLPE aluminium conductor cable of 11 Kvgrade as required 240 sq mm | 16 | Each | |
| 160 | 149 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushionng, protective covering and refilling the trench etc. as required above 120 sq mm and 400 sq. mm. | 300 | mtr | |
| 161 | 150 | Makes Synergy 315 KVA,11/0.433 KV 50 Hz, 3 Phase, Outdoor type Copper Wd. Connected in H.V/LV-Delta/Star Vector Group, Dyn11, ONAN cooled 1st filling of transformer oil as per IS-335 with standard fitting as per IS-2026. | 20 | Each | |
| 162 | 151 | GST | 4.28913e+08 | % | |
| 163 | 152 | Labour cess | 4.80383e+08 | % |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
