Upgradation Of Already Created Assets Falling Under Lsda ( Upgradation Of Office Building At Lakhanpur )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Mar 2021
0 days left
EMD
20220
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
lakhanpur → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Upgradation Of Already Created Assets Falling Under Lsda ( Upgradation Of Office Building At Lakhanpur )
BOQ
| Name of Work: Upgradation of already created assets falling under LSDA ( Upgradation of office building at Lakhanpur) Approx. cost. Rs. 6.74. Time of Completion 30 days | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead : | BI01010001010000000000000515BI0100001058 | ||
| 2 | 1.01 | With cement mortar 1:4 (1 cement: 4 fine sand) | BI01010001010000000000000515BI0100001059 | 45 | Sqm |
| 3 | 2 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001060 | 221 | Sqm |
| 4 | 3 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. | BI01010001010000000000000515BI0100001061 | ||
| 5 | 3.01 | a)Old work (one or more coats) | BI01010001010000000000000515BI0100001062 | 442 | Sqm |
| 6 | 3.02 | b) New work (two or more coats) over and inceluding priming coat with cement primer | BI01010001010000000000000515BI0100001063 | 110 | Sqm |
| 7 | 4 | Finishing walls with Acrylic smooth exterior paint of required shade: | BI01010001010000000000000515BI0100001064 | ||
| 8 | 4.01 | Old work (two or more coats applied @ 1.67 litres/ 10 sqm on existing cement paint surface) | BI01010001010000000000000515BI0100001065 | 444 | Sqm |
| 9 | 5 | Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/1 Osqm over and including base Coat of water proofing cement paint applied @ 2.20kg/1 Osqm) | BI01010001010000000000000515BI0100001066 | 111 | Sqm |
| 10 | 6 | Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001067 | 267 | Sqm |
| 11 | 7 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. | BI01010001010000000000000515BI0100001068 | 115 | Sqm |
| 12 | 8 | Renewing glass panes, with wooden fillets wherever necessary : Glass panes weighing 10 kg I sqm | BI01010001010000000000000515BI0100001069 | 20 | Sqm |
| 13 | 9 | Demolishing cement concrete , ceramic tiles, marble etc. manually/by mechanical means including disposal of material : 1:3:6 or richer mix \n | BI01010001010000000000000515BI0100001070 | 3 | Cum |
| 14 | 10 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete | BI01010001010000000000000515BI0100001071 | 22 | Sqm |
| 15 | 11 | Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001072 | 15 | Sqm |
| 16 | 12 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded crushed stone aggregate 12. 5mm nominal size) | BI01010001010000000000000515BI0100001073 | 15 | Sqm |
| 17 | 13 | Providing and fixing single unit Viterous China european type W.C with seat , lid flushing cistern complete ( kajaria, cera, Hindware, Jaguar or equivalent make) design and pattern as per the instructions of Engineer-in-Charge. | BI01010001010000000000000515BI0100001074 | 3 | No. |
| 18 | 14 | Providing and fixing Viterous china wash basin with pedestal , C. I./M.S. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: ( kajaria, cera, Hindware, Jaguar or equivalent make) design and pattern as per the instructions of Engineer-in-Charge. | BI01010001010000000000000515BI0100001075 | 3 | No. |
| 19 | 15 | Providing and fixing sanitary fittings as under ( kajaria, cera, Hindware, Jaguar or equivalent make) design and pattern as per the instructions of Engineer-in-Charge. | BI01010001010000000000000515BI0100001076 | ||
| 20 | 15.01 | 1) C.P Pillar Cocks | BI01010001010000000000000515BI0100001077 | 3 | No. |
| 21 | 15.02 | 2) C.P angle valve | BI01010001010000000000000515BI0100001078 | 15 | No. |
| 22 | 15.03 | 3) C.P long Nose bib cock | BI01010001010000000000000515BI0100001079 | 3 | No. |
| 23 | 15.04 | 4) C.P Short body Bib cock | BI01010001010000000000000515BI0100001080 | 3 | No. |
| 24 | 15.05 | 5) C.P /steel Towel rod 600mm long | BI01010001010000000000000515BI0100001081 | 3 | No. |
| 25 | 15.06 | 6) C.P/ Steel towel ring | BI01010001010000000000000515BI0100001082 | 3 | No. |
| 26 | 15.07 | 7) C.P /Glass Shelve | BI01010001010000000000000515BI0100001083 | 3 | No. |
| 27 | 15.08 | 8) C.P grating 100mm Dia | BI01010001010000000000000515BI0100001084 | 6 | No. |
| 28 | 15.09 | 9) C.P / Steel Toilet paper holder | BI01010001010000000000000515BI0100001085 | 3 | No. |
| 29 | 15.1 | 10) C.P/ Steel Soap Dish | BI01010001010000000000000515BI0100001086 | 3 | No. |
| 30 | 15.11 | 11) C.P extension Nipple | BI01010001010000000000000515BI0100001087 | 24 | No. |
| 31 | 15.12 | 12) P.V.C waste Pipe | BI01010001010000000000000515BI0100001088 | 3 | No. |
| 32 | 15.13 | 13) P.V.C connection 600mm with nuts | BI01010001010000000000000515BI0100001089 | 6 | No. |
| 33 | 15.14 | 14) P.V.C floor trap | BI01010001010000000000000515BI0100001090 | 3 | No. |
| 34 | 15.15 | 15) P.V.C Pipe 75mm Dia | BI01010001010000000000000515BI0100001091 | 4 | Mtr |
| 35 | 15.16 | 16) PVC Bend 75mm Dia | BI01010001010000000000000515BI0100001092 | 9 | No. |
| 36 | 15.17 | 17) C.P waste coupling | BI01010001010000000000000515BI0100001093 | 3 | No. |
| 37 | 15.18 | 18) Fancy looking glass | BI01010001010000000000000515BI0100001094 | 3 | No. |
| 38 | 16 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area of 3 sq. metres and below | BI01010001010000000000000515BI0100001095 | 7 | Each |
| 39 | 17 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area of 3 sq. metres and below | BI01010001010000000000000515BI0100001096 | 5 | Each |
| 40 | 18 | Providing and Fixing Powder coated aluminium door, window shutters incl: frames , panelling of glass or PVC or laminated board, wire gauge shutters incl: all accessories complete . Design and Guage od sections as per the Directions of Engineer-in Charge. | BI01010001010000000000000515BI0100001097 | 16 | Sqm |
| 41 | 19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 60x60cm | BI01010001010000000000000515BI0100001098 | 32 | Sqm |
| 42 | 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge.Second class deodar wood | BI01010001010000000000000515BI0100001099 | 12 | Sqm |
| 43 | 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Particle Board 12mm thick.Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked | BI01010001010000000000000515BI0100001100 | 7 | Sqm |
| 44 | 22 | Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze .of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows:lSI marked M.S. pressed but hinges bright\nfinished butt hinges of required size with necessary\nscrews Second class deodar wood | BI01010001010000000000000515BI0100001101 | 4 | Sqm |
| 45 | 23 | Providing and fixing PVC Panelling on walls incl; cutting, wastage and carriage complete. Design and specifications as per the approval of Engineer-in-charge. | BI01010001010000000000000515BI0100001102 | 1600 | Sqm |
AI Tender Summary
Tender Timeline
Mar 10, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 17, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 18, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender