Construction Of Squash Court At Hcm Ripa Jaipur, Hcm Ripa Jaipur-Rajasthan

TDR : 27275527

Tender Notice
BOQ

Expired

Hcm Ripa Jaipur , Rajasthan

Tender Brief : Construction Of Squash Court At Hcm Ripa Jaipur

Document Fees
₹ 590 /-

EMD
Refer document

Tender Value
₹ 36.24 Lakhs /-

Submission Date
17-03-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work : Const. of Squash Court at HCM-RIPA, Jaipur
1	1.01	Rates are based on PWD City Circle BSR 2019 Jaipur & Non BSR Items	0.0001	Each
2	1.02	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. \nAll kinds of soils	100	Cum
3	1.03	Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.	65	Cum
4	1.04	Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion)	120	Sqm
5	1.05	Supplying chemical emulsion in sealed containers including delivery as specified.\nChlorpyriphos/Lindane emulsifiable concentrate of 20%	10	Litre
6	1.06	Carriage of Earth, Sand, Lime, Morrum manure or sludge with loading and unloading complete with a lead for 10 Km	50	Cum
7	1.07	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete.	0.0001	Each
8	1.08	75mm thick with 20mm thick nominal size aggregate.	160	Sqm
9	1.09	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.	0.0001	Each
10	1.1	1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).	35	Cum
11	1.11	Providing and laying in position Ready mix concrete manufactured in fully automatic Batching Plant and transported to site in transit mixer for having continous agitated mixer, manufactured as per approved mix design of specified grade of RCC work including pumping of R.M.C. from transit mixer to site of laying , exculding the cost of centering, shuttering and reinforcement with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge . All works upto floor V floor M20 grade Design Mix by using cement as per codal provision.	42	Cum
12	1.12	Add extra for providing richer mixes respectively at all floor levels	0.0001	Each
13	1.13	Providing M-25 grade concrete by using cement as per codal provision instead of M-20 grade design mix.	42	Cum
14	1.14	Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. \n('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)	0.0001	Each
15	1.15	Thermo-mechanically Treated bars (Conforming of relevent IS code)	5500	Kg
16	1.16	Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.	25	Sqm
17	1.17	Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :	0.0001	Each
18	1.18	Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.	285	Sqm
19	1.19	Columns, pillars, posts and struts etc.	70	Sqm
20	1.2	Add extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan are is to be measured)	120	Sqm
21	1.21	Brick work with clay flyash F.P.S. brick (IS 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in :	0.0001	Each
22	1.22	Cement mortar 1 : 6 (1 cement : 6 coarse sand)	65	Cum
23	1.23	Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:	0.0001	Each
24	1.24	Cement Mortar 1:6 ( 1-Cement : 6-Sand).	25	Cum
25	1.25	Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for precast concrete block for paving- specification) and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement)	0.0001	Each
26	1.26	M-30, 60 mm thick to be used in non traffic areas like building premises, monument premises, land scapes, public gardens/ park, domestic drives, paths and patios, Embankment slopes, sand stabilization Area etc.( As per table 1 of IS 15658:2006	0.0001	Each
27	1.27	Category ‘B’ Denated only two side like I,Z,T shape etc. as per IRC SP 63:2004	30	Sqm
28	1.28	Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :	0.0001	Each
29	1.29	20mm thick.	760	Sqm
30	1.3	6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)	300	Sqm
31	1.31	Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete	0.0001	Each
32	1.32	New Plastered Surface (three or more coats)	760	Sqm
33	1.33	Making grooves as per design in plaster 10mm to 20mm wide.	200	Rmt
34	1.34	Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.	0.0001	Each
35	1.35	Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour)	0.0001	Each
36	1.36	Above 3601 Cm2 Slabs	14	Sqm
37	1.37	Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.	0.0001	Each
38	1.38	Granite/Kota Stone Work	0.0001	Each
39	1.39	Full Edge moulding	20	Mtr
40	1.4	P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.	0.0001	Each
41	1.41	size 800 mm X 800mm	40	Sqm
42	1.42	Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).	16	Sqm
43	1.43	Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).	4	Sqm
44	1.44	Providing and fixing 14 mm thick Acoustical with fine fissured tiles/ Mineral fibre high density tiles with butt edges false ceiling tiles of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge. ( The tiles should of 90 % RH avg. NCR 0.55 light reflectance> 80% thermal conductiveity K = 0.052-0.057 w/m K colour white. Fire performance class 0/class I(BS 476) with warranty against sag)	100	Sqm
45	1.45	Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and MAT finished tiles.	16	Sqm
46	1.46	Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.	16	Sqm
47	1.47	Grading roof for water proofing treatment with water proffing compound	0.0001	Each
48	1.48	Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)	20	Cum
49	1.49	Making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges and making and finishing the out let complete.	6	Each
50	1.5	Crazy marble stone flooring 20mm thick marble stone with black or of specified colour topping including filling the gaps with cement marble chips mix in proportion of 4 : 7 (4cement : 7 white black or white or black marble chips) size from 1mm to 4mm by volume and under layer of 25mm thick cement concrete [1:2:4, graded stone aggregate 12.5mm nominal size] rubbing and polishing and cement slurry etc. complete :\nIn ordinary cement.	115	Sqm
51	1.51	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :	50	Mtr
52	1.52	Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).	0.0001	Each
53	1.53	For fixed portion	0.0001	Each
54	1.54	Powder coating aluminum ( minimum thickness of powder coating 50 micron)	250	Kg
55	1.55	For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately).	0.0001	Each
56	1.56	Powder coating aluminum ( minimum thickness of powder coating 50 micron)	100	Kg
57	1.57	Extra for shutters of sliding aluminum windows	100	Kg
58	1.58	Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)	0.0001	Each
59	1.59	With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm)	25	Sqm
60	1.6	Filling the gap upto 5 mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.	100	Rmt
61	1.61	Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design	50	Rmt
62	1.62	Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat including scaffolding and safety provision	0.0001	Each
63	1.63	Trowel Finish av. thickness 1500 to 2000 microns.	620	Sqm
64	1.64	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: \n	0.0001	Each
65	1.65	Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.	350	Sqm
66	1.66	Fine dressed & machine cut edges 30-35 mm thicksand stone flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI.	0.0001	Each
67	1.67	Pink sand stone (Bansi Paharpur stone)	40	Sqm
68	1.68	Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.	4	Each
69	1.69	Providing and fixing bright finished Mortice lock of approved make Godrej or equivalent with pair of CP handles for doors with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge.	2	Each
70	1.7	Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint	2	Sqm
71	1.71	Part B Sanitary work	0.0001	Each
72	1.72	P & F European type white glazed vitreous china 1st quality W.C. (IS : 2556 Mark) including cutting and making good the wall and floor	0.0001	Each
73	1.73	Wall Mounting (syphonic)	1	Each
74	1.74	P & F water closet Seat Covers with brass hinges complete :	0.0001	Each
75	1.75	-do- White.	1	Each
76	1.76	P & F C.P. lugs for toilet seat cover.	1	Pair
77	1.77	P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:	0.0001	Each
78	1.78	PVC with PVC bend and superior internal fittings	1	Each
79	1.79	P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :	0.0001	Each
80	1.8	Size 630 mm x 500 mm dia for counter top	1	Each
81	1.81	P & F Bottle Trap of approved make :	1	Each
82	1.82	C.P Brass 40 mm	0.0001	Each
83	1.83	P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers.	0.0001	Each
84	1.84	Size 600 x 450mm x 4 mm thick	1	Each
85	1.85	P & F Extension Pipe for bib cocks of approved quality/make.	0.0001	Each
86	1.86	C.P. brass of Heavy & Superior quality 50x15mm	5	Each
87	1.87	P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.	1	Each
88	1.88	P & F C.P. Health Faucet with 1Mtr. Long Tube & Hook of approved make and heavy as per direction of Enginner-in-Charge	1	Each
89	1.89	Providing & fixing C.P.flange for 15mm dia taps.	5	Each
90	1.9	P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors:	0.0001	Each
91	1.91	Exposed on wall	0.0001	Each
92	1.92	15 mm dia nominal bore	0.0001	Each
93	1.93	'B' Class	40	Mtr
94	1.94	25mm dia nominal bore	0.0001	Each
95	1.95	'B' Class	20	Mtr
96	1.96	Concealed pipe in wall including painting with anticorrosive bitumen paint	0.0001	Each
97	1.97	15 mm dia nominal bore	0.0001	Each
98	1.98	'B' Class	20	Mtr
99	1.99	Making connection of G.I. distribution branch with G.I. main including all fitting.	0.0001	Each
100	2	Upto 25mm dia	2	Each
101	2.01	P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :	0.0001	Each
102	2.02	Brass wt. Not less than 300 gm,15mm.	1	Each
103	2.03	P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :	0.0001	Each
104	2.04	Gun-metal 15mm nominal bore.	1	Each
105	2.05	(-do-) 25mm nominal bore.	1	Each
106	2.06	P & F Gun-metal Non-return Valve or Check Valve (IS :Make) of approved make, superior quality:	0.0001	Each
107	2.07	25mm nominal bore.	0.0001	Each
108	2.08	Vertical	1	Each
109	2.09	P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:	0.0001	Each
110	2.1	1000 (-do-)	1	Each
111	2.11	Hoisting Charges for each floor :	0.0001	Each
112	2.12	For items 2.26.5 to 2.26.8	1	Each
113	2.13	Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size :	0.0001	Each
114	2.14	15mm dia nominal bore	5	Each
115	2.15	25mm dia nominal bore	5	Each
116	2.16	Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge	0.0001	Each
117	2.17	Swan neck pillar cock 15 mm nominal size	1	Each
118	2.18	Bib Cock with long thread 15 mm nominal size	2	Each
119	2.19	Long body Bib Cock 15 mm nominal size	2	Each
120	2.2	Angular stop cock with long thread 15 mm nominal size	5	Each
121	2.21	Concealed stop cock 15 mm nominal size	1	Each
122	2.22	600 mm long towel rail	1	Each
123	2.23	Soap dish	1	Each
124	2.24	Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete.	0.0001	Each
125	2.25	150mm dia	15	Mtr
126	2.26	Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete (Width W= Diameter of pipe in Cm+30 Cm.)( Excluding cost of pipe)	0.0001	Each
127	2.27	150mm dia S.W. pipe	15	Mtr
128	2.28	Providing & fixing S.W. square mouth Gully trap `A` grade (IS 651-1992 marked) of approved make & design in existing man-hole.	0.0001	Each
129	2.29	Size 150 X 100mm	1	Each
130	2.3	P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.	0.0001	Each
131	2.31	110 mm dia	30	Mtr
132	2.32	P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:	0.0001	Each
133	2.33	Plain Tee	0.0001	Each
134	2.34	110mm dia	6	Each
135	2.35	Bend 87 .5	0.0001	Each
136	2.36	110mm dia	6	Each
137	2.37	Vent Cowel	0.0001	Each
138	2.38	110mm dia	6	Each
139	2.39	Pipe Clip	0.0001	Each
140	2.4	110mm dia	20	Each
141	2.41	Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design :	0.0001	Each
142	2.42	Depth up to 1.5 M	1	Each
143	2.43	Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.	0.0001	Each
144	2.44	Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame.	8	Each
145	2.45	Construction of Cement Concrete Chamber 125mm dia on depressed floor upto 45cm height from floor with :	0.0001	Each
146	2.46	Stainless Steel Sheet Grating	2	Each
147	2.47	NON-BSR ITEMS	0.0001	Each
148	2.48	Providing and fixing of Stainless Steel Railing work made out of SS round pipe dia 50 mm rail and vertical 40 mm dia with canting of tube 20 mm dia. All material shall be 304 grade . Fixing shall be nut bolt, screw as required at site of work with 5mm glass attachng in required frames as per drawing and design and direction of engineering in charge	7	Rmt
149	2.49	P&F 12mm. Thick toughned frameless door of approved brand with floor spring and patch fittings with acessories like corners lock pivot, top patch, bottom patch, handle, connectors, locking arrangement and other accessories as directed all fittings should be approved make, including all arrangements required for fixing, including handle on both side size and shape as decided by Engineer in charge.	3.6	Sqm
150	2.5	Providing and installation of 4 panels size 1.436x2.153 Mtr each with the thickness of 12mm thick clear toughened glass, a glass door size 678x2128mm and 4 fins size 350mm x 2196mm each with thickness of 15mm including aluminium lock and the bolts that are embedded for the glass fins (Confirming to world Squash Federation).Item includes all necessary SS fittings and floor springs as per direction of engineer in charge(FOR SINGLE SQUASH COURT)	0.0001	Each
151	2.51	Providing and fixing Maple wood flooring consisting the following specification:-	0.0001	Each
152	2.52	Rubber Cushion Pads : 10 mm thick rnbber cushion pad shall be laid over C.C. flooring	0.0001	Each
153	2.53	Sleepers: 70mm x 45mm hem lock ( HEM FIR) from Canada kiln dried and chemically treated (Anti termite tremment)	0.0001	Each
154	2.54	Flooring : Kiln Seasoned imported Maple wood surface board finished 21 mm thick x60 to 85 mm wide tongue and grooved & EM marked & stamped. The Maple flooring to be imported from Canada.	0.0001	Each
155	2.55	The work shall be complete including installation as per direction of Engineer-in-charge.	0.0001	Each
156	2.56	Providing and laying 5mm thlck Epoxy Hard plaster treatment on 3 walls i.e. front wall and 2 side walls, consisting of primer coating 5mm screeding and finishing with epoxy paint in matt finish (as per requirement of World Squash Federation). The walls are finished with three factory applied coats of high permonance paint . colour RAL 9001. The out play lines are made of extruded aluminium ,colur red RAL, 3001.6.3 CT MOVABLE SYSTEM . W200 CT SYSTEM WALL and Game line marking in RED color as per WSF standards for SQUASH COURT. This consist of :-	0.0001	Each
157	2.57	Primer Coating : CIBA's Bisphernol, A based resin, with compatible Hardener in the ratio as perscribed by the company - 100:50	0.0001	Each
158	2.58	Epoxy Mortar Screeding	0.0001	Each
159	2.59	Resin GY250/257 -100 Parts	0.0001	Each
160	2.6	Hardner HY840/2969 - 50/60 Parts	0.0001	Each
161	2.61	Quartz Sand No. 10 - 800/900 Parts	0.0001	Each
162	2.62	Seal Coat (Top Coat):	0.0001	Each
163	2.63	Resin GZ7071x75 or GZ601x75 - 100 Parts	0.0001	Each
164	2.64	Hardner HY825	0.0001	Each
165	2.65	White Pigment Paste - As per requirement	0.0001	Each
166	2.66	Flow Control Agent - As per Requirement	0.0001	Each
167	2.67	Thisotropic Agent - As per Requirement	0.0001	Each
168	2.68	Two to three coat - As per reguirement	0.0001	Each
169	2.69	The rate are including of all the operation as per drawing and as per direction of Engineer-in charge.	0.0001	Each
170	2.7	21 Feet x 17 inch made of Wooden frame pasted with G.I Powder Coated Sheet which is concealed with 2 Inch X 21 ft molded wood. (Sound Boared Tin)	1	Each

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Rajasthan Tenders

Construction Tenders

Civil Construction Tenders

Civil Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Squash Court At Hcm Ripa Jaipur, Hcm Ripa Jaipur-Rajasthan

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Squash Court At Hcm Ripa Jaipur, Hcm Ripa Jaipur-Rajasthan

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us