| 1 | 1 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge | | | |
|---|
| 2 | 1.1 | 15 mm to 40 mm nominal bore. | | 100 | Mtr |
|---|
| 3 | 1.2 | Above 40 mm nominal bore | | 150 | Mtr |
|---|
| 4 | 2 | Earth work in excavation by manual means in trenches for foundations ,drains, pipes, cables etc (not exceeding 1.5mtr in width) and for shafts ,wells ,cesspits, and the like not exceeding 10sqm on plan ,including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed .All kinds of soils | | 968.28 | Cum |
|---|
| 5 | 3 | Providing and laying of stone solling hand packed including watering dressing and ramming all complete | | 9.33 | Cum |
|---|
| 6 | 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) | | 7.34 | Cum |
|---|
| 7 | 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 mix (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size ) | | 35.06 | Cum |
|---|
| 8 | 6 | Providing and laying specified grade of reinforced cement concrete including curing but excluding the cost of centring , shuttering , finishing and reinforcement all works upto plinth level 1:2:4 mix ( 1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) | | 0.58 | Cum |
|---|
| 9 | 7 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) | | 2.13 | Cum |
|---|
| 10 | 8 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) | | 5.25 | Cum |
|---|
| 11 | 9 | Steel reinforcement for RCC work including straightening, cutting , bending , placing in position and binding all complete upto plinth level thermo –Mechanically –Treated bars of grade Fe-500D or more | | 216 | Kg |
|---|
| 12 | 10 | Centring shuttering including strutting , propping etc. and removal of form work for | | | |
|---|
| 13 | 10.1 | Foundation footings , bases for columns | | 219.26 | Sqm |
|---|
| 14 | 10.2 | Columns, pillars, piers, abutments, posts and struts. | | 10.8 | Sqm |
|---|
| 15 | 10.3 | Suspended floors, roofs, landings, balconies and access platforms | | 9.21 | Sqm |
|---|
| 16 | 10.4 | Edges of slabs and breaks in floors and walls Under 20 cm wide | | 13 | Mtr |
|---|
| 17 | 11 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) | | 41.18 | Kg |
|---|
| 18 | 12 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) | | 181.04 | Sqm |
|---|
| 19 | 13 | Providing fixing flanged joints with 12mm thick flanges including cost of nuts , bolts, washers, cutting of thread and making good for jointing including testing and commissioning all carriages head load complete 80 mm dia G.I pipe | | 25 | Joint |
|---|
| 20 | 14 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) | | | |
|---|
| 21 | 14.1 | 80 mm dia G.I pipes | | 400 | Mtr |
|---|
| 22 | 14.2 | 65 mm dia G.I pipes | | 200 | Mtr |
|---|
| 23 | 14.3 | 50 mm dia G.I pipes | | 800 | Mtr |
|---|
| 24 | 14.4 | 40 mm dia G.I pipes | | 1386 | Mtr |
|---|
| 25 | 14.5 | 25 mm dia G.I pipes | | 1300 | Mtr |
|---|
| 26 | 14.6 | 20 mm dia G.I pipes | | 1500 | Mtr |
|---|
| 27 | 14.7 | 15 mm dia G.I pipes | | 2016 | Mtr |
|---|
| 28 | 15 | Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329 100 mm dia Ductile Iron Class K - 7 Pipes | | 200 | Mtr |
|---|
| 29 | 16 | Making connection of G.I distribution branch with G.I main of following size by providing and fixing tees, including cutting and threading the pipe etc complete | | | |
|---|
| 30 | 16.1 | (a) 25 to 40 mm nominal bore | | 15 | No |
|---|
| 31 | 16.2 | (b) Above 40 mm nominal bore | | 8 | No |
|---|
| 32 | 17 | Filling available excavated earth (Excl. rock) in trenches, plinth sides of foundation etc. layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead upto 50mtr and lift upto 1.5mtr | | 828.57 | Cum |
|---|
| 33 | 18 | Providing repairs to 100mm dia flanges by way of providing welding , nuts , bolts, washers, all carriages by mechanical transport spot to spot including dismantling if any and excavation and refilling including commissioning complete job 100 dia flanges (to be paid as per actual details /measurements | | 155 | Joint |
|---|
| 34 | 19 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | | 1454.73 | Kg |
|---|
| 35 | 20 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer incharge. Made of G.I. wire of dia 4 mm | | 182.99 | Sqm |
|---|
| 36 | 21 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | | 3 | Cum |
|---|
| 37 | 22 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | | 250 | Kg |
|---|
| 38 | 23 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work | | 154.8 | Sqm |
|---|
| 39 | 24 | Providing fixing of poplar wood of standard quality including necessary nails , and carriage complete . (to be paid as per actual details /measurements with supporting vouchers dully verified by AEE concern ) | | 140 | Cft |
|---|
| 40 | 25 | Providing corrugated G.S sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks , bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I filled with white lead , including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horiziontal / vertical or curved surface ) excluding the cost of purlins , rafters and trusses and including cutting to size and shape wherever required 0.63mm thick with zinc coating not less than 275gram/sqm | | 81.19 | Sqm |
|---|
| 41 | 26 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete .with 0.63 mm thick with zinc coating not less than 275 gram/m2 | | 20 | Mtr |
|---|
| 42 | 27 | Providing and fixing of coloured soffits of standard quality including all necessary accessories including all sorts of carriage complete . (to be paid as per actual details /measurements with supporting vouchers dully verified by AEE concern ) | | 18.96 | Sqm |
|---|
| 43 | 28 | Providing and fixing of sanitary items of standard quality like 1000 liters sintex , W.C Indian type , flush tank , with all accessories . pvc pipe , pipe specials , C.P items , p trap , floor trap, bends , steel sink , connecting with soakage , whichever be necessary to make functional all complete (to be paid as per actual details /measurements with supporting voucher dully verified by AEE concern ) | | 1 | Job |
|---|
| 44 | 29 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown | | 15 | Sqm |
|---|
| 45 | 30 | Providing fixing supplying P.C.C rings including earthwork excavation and disposal of surplus excavated material outside the premises including providing and laying cement concrete in 1:2:4 mix over septic tank and soakage pit . construction of man hole chambers with angle iron frame and covering arrangements .providing fixing of P.V.C pipe ( prince make B class ) including bends whichever is required at site or as per directions of Engineer- in- charge (3 compartments for septic tank and 1 for soakage pit (to be paid as per actual details /measurements ) | | 20 | Rft |
|---|
| 46 | 31 | Providing ,supplying fixing instillation of electric fittings of standard quality incl. 19/18 copper wire cable connection with transformer , instillation of panel board, switch board, switches, lighting points, heating points, fans , exhaust fans pvc conduit, havels wire , MCB, changeover , whichever is related to the item and found necessary at site or as per directions of Engineer- in- charge (to be paid as per actual details /measurements with supporting vouchers dully verified by AEE concern ) | | 1 | Job |
|---|
| 47 | 32 | Providing fixing double flanges C.I sluice valves of standard quality Kirlosker /vage make confirming to IS 780 of 1984 read with upto date amendments standard mark ISI make PN-1 including cost of nuts bolts IR cloth including all sorts of carriage upto site of work complete job including cost of pedestals and handles (to be paid as per actual details with supporting vouchers dully verified by AEE concern ) 100 dia sluice valve . | | 4 | No |
|---|
| 48 | 33 | Carriage of material from source of site upto site of work by mechanical transport including loading unloading stacking at site complete | | | |
|---|
| 49 | 34 | Sand and Bajri avg lead 15km | | 64.79 | Cum |
|---|
| 50 | 35 | Cement and steel avg lead 15km | | 12.78 | M.T. |
|---|
| 51 | 36 | Stone solling avg lead 15km | | 9.33 | Cum |
|---|
| 52 | 37 | Bricks for avg lead 15 km | | 2949 | No |
|---|
| 53 | 38 | Well No. 1:\nDesign, supply, Installation, Testing & Commissioning of Submersible Pumping Equipment Suitable for bore well (detailed specifications as per Annexure B) | | 1 | Job |
|---|
| 54 | 39 | P/F of 3 Core, 10 Sq.mm Cu- Submersible Cable ( Flat Cable) as per IS694:1990 ( Standard Insulation) of L& T/ Havells Make | | 90 | Mtr |
|---|
| 55 | 40 | Fabrication, providing & fitting of 65 mm dia. (class-C) Flanged GI column pipes each of 10 rft length; The job includes the cost of 18 mm thick MS flanges on both sides and welding in two layers to make the flanged joint strong and leak proof. The pipe of 10 ft length is to be weld on both sides with flanges of standard size with Advani /Adore electrode (AdvaniOerlikon make). The job includes all types of skilled labours, power supply diesel Generator etc required for the job, with suitable size nuts, bolts, RI Cloth in the flanged joints of column pipes. | | 15 | Job |
|---|
| 56 | 41 | Fabrication, providing & fitting of 65 mm dia.(class-c) Flanged GI delivery pipes of standard length. The job includes the cost of 18 mm thick MS flanges and welding in two layers to make the flanged joint strong and leak proof. The delivery pipe is to be weld on both sides with flanges of standard size with Advani /Adore electrode (AdvaniOerlikon make). The job includes all types of skilled labours, power supply diesel generator etc required for the job,with suitable size nuts bolts RI Cloth in the flanged joints of delivery pipes. The pipe is to be laid underground in trenches by cutting of hard soil as per site condition. | | 24 | Mtr |
|---|
| 57 | 42 | Fabrication providing & fitting of split type MS Clamps 80mm dia ,8mm thick,2.5” wide(dia.) and 2.5 feet long for lowering of column pipes and holding of pumping unit after lowering. The job includes the cost of required size of nuts and bolts . | | 2 | Pair |
|---|
| 58 | 43 | Providing & fitting of 65 mm dia. 90 to120 degree bend/ offsets/reducer made of (class-B) GI pipe and flanged on both ends after cutting threaded portion to make it leak proof. The bend shall have two no. flanges 18 mm thick weld on both sides in two runs of welding. The job includes p/f of suitable size nuts, bolts, RI Cloth required for jointing, | | 4 | Job |
|---|
| 59 | 44 | Fabrication, Providing and fitting of washout arrangement to the rising main by way of P/F of 65 mm dia G.I flanged pipe length(c-class)-1mtr including Providing / Fitting of 65 mm dia. G. I. Tee of equal sides duly flanged 16mm thick on all three sides with welding in double layers to make leak proof joints. Nuts, bolts and rubber insertion washers required are also included in the job. | | 1 | Job |
|---|
| 60 | 45 | Fab., Errection and Fixing of M.S Stool to the casing assly.of the production well.The stool shall be fabricated out of ISMC – 100 and ISA 50×50×6mm in such a way that the top of the stool flushes with top of casing pipe.The size of stool shall be 2’×2’ with a height of 3’,adequate bracings are to be provided and a detachable M.S plate of 2’×2’ size and 10mm thick , splitted in two parts having 3” dia. Size hole at the centre. | | 1 | Job |
|---|
| 61 | 46 | Providing, fabricating and fitting of gravel Hooper fabricated out of angle iron ISA (50x50x5) and MS plates, chequered plate 6mm sheeting all over five sides including cover at top and excluding bottom side of size 3’x3’ from top and 2’x2’ at bottom having 3’ depth(frustum type).The top over is to be split in to two parts with making/cutting of circular hole having overall diameter of 12 inch and hinged with the two sides of the hopper by way of P/F of required size of moveable hinges with locking arrangements at the top of the hooper. The job includes earth work excavation from the top of the well casing/flooring up to the ground level for making of gravel pit to accommodate gravel hooper.The job includes all head loads and lifts and anti corrosive painting in Silver / Blue/ RED coating following by red oxide 2 coats. | | 1 | Job |
|---|
| 62 | 47 | Fabrication / Erection of Channel iron column to act as support for resting of monorail crane (detailed specifications as per Annexure B) | | 1 | Job |
|---|
| 63 | 48 | Providing/fitting of manual type chain pully block (detailed specifications as per Annexure B) | | 1 | Job |
|---|
| 64 | 49 | Providing, Fitting of 65 mm,PN 1.6/16, Ductile Iron double flanged, soft seated glandless gate/ sluice valve. Body and bonnent of ductile cast iron, wedge with fully vulcanized EPDM rubber(Approved for drinking water) and NBR seal. Gate /Sluice valve shall be compatible for buried application and shall be safe to install in both horizontal and vertical positions. It shall have electrostatic epoxy coating inside and outside approved for drinking water the valve shall be supplied along with hand wheel. The job includes providing and fitting of 02 No. M.S Flanges perfectly adaptable to the inbuilt flanges of the valve, which shall be fitted with delivery mains of the pumping unit. Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work. Make :VAG / TALIS /AVK | | 2 | Job |
|---|
| 65 | 50 | Providing, Fitting of 65 mm,PN 1.6/16, Ductile Iron double flanged, Slanted seat swing check valve( NRV). Body of ductile cast iron with fully encapsulated vulcanized EPDM rubber(Approved for drinking water) . Gate /Sluice valve shall be compatible for buried application and shall be safe to install in both horizontal and vertical positions. It shall have electrostatic epoxy coating inside and outside approved for drinking water. The job includes providing and fitting of 02 No. M.S Flanges perfectly adaptable to the inbuilt flanges of the valve, which shall be fitted with delivery mains of the pumping unit. Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work. Make :VAG / TALIS/AVK | | 1 | Job |
|---|
| 66 | 51 | Creation of 63 KVA Electric Sub Station as per the technical (detailed specifications as per Annexure B) | | 1 | Job |
|---|
| 67 | 52 | Steel Tubular Poles:- (detailed specifications as per Annexure B) | | 1 | Job |
|---|
| 68 | 53 | P/F of Guy Wire Complete with shekel insulator to MS poles at necessary locations. The Job includes excavation of pit for lowering Guy stone with guy wire and back filling of same. | | 2 | Job |
|---|
| 69 | 54 | Earthing for Substation structure (detailed specifications as per Annexure B) | | 1 | Job |
|---|
| 70 | 55 | Providing/ fitting of link rod for isolating link set.. | | 1 | No |
|---|
| 71 | 56 | Providing and Fitting of 0.05 ACSR Aluminum conductor. | | 230 | Mtr |
|---|
| 72 | 57 | P/F of 35 Sq.mm, 3 Core, ABC Al HT cable 11 KV of Havells/Gloster/ Polycab/ at necessary locations. | | 60 | Mtr |
|---|
| 73 | 58 | P/F of 11 KV HT Kit at necessary locations.(9 Nos) | | 3 | Kit |
|---|
| 74 | 59 | Providing, fitting of G.O. Link set suitable for 11 KV(3 pieces) of reputed make as per REC standard including pipe of suitable length and diameter for its operation . The job also includes earthing of link set handle as per REC norms. rod, handle etc | | 1 | Job |
|---|
| 75 | 60 | Fabrication, providing and fitting of L.T Modular control panal “ Padestal type” of appropriate size duly powder coated & fabricated out of 2mm crca sheets sheet having required openings/vents and protections/ locking arrangements/ mountings for the fitment of devices and including arrangements of terminal for earthing to whole panal body (detailed specifications as per Annexure B) | | 1 | Job |
|---|
| 76 | 61 | Providing, Installation, Testing & Commissioning 25 KVA voltage stabilizer (detailed specifications as per Annexure B) | | 1 | Job |
|---|
| 77 | 62 | Service line:- Providing and fitting of 35 mm Sq 3.5 core XLPE Armored Al cable Havells /polycab/ finolex make to be used as service line, laying underground where ever required from the control panel to the change over system etc. the job includes the cost of all types of men and machines required. The cable terminals for connections to switch gear at various requisite points shell be Aluminium thimbles of Dowel`s make and of appropriate size and connected by hydraulic crimp tool only. | | 50 | Mtr |
|---|
| 78 | 63 | Interconnections :- Providing & Fitting of 25 mm square single core copper cable of Havells/polycab/finolex make for inter connections laying under ground wherever required from the control panel to the changeover, MCCB, Voltage stabilizer & other system. The job includes the cost of all types of men & machines required. The cable terminals should be crimpled with copper thimbles. | | 90 | Mtr |
|---|
| 79 | 64 | Providing and erection of 9 Mtr long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection (detailed specifications as per Annexure B) | | 1 | Job |
|---|
| 80 | 65 | Electrification of pump house:- (detailed specifications as per Annexure B) | | 1 | Job |
|---|
| 81 | 66 | Providing of heating Blower of reputed make. | | 1 | No |
|---|
| 82 | 67 | Well No. 2:\nSupply, installation, testing and commissioning of multistage bowl type Submersible clear water pumping (detailed specifications as per Annexure B) | | 1 | Job |
|---|
| 83 | 68 | Providing and fixing of Budloo wood for basement, vertical posts, horizontal posts etc. for ply pennalling of operators quarter. The job includes providing& fixing of nails, hinges, aldropsetc wherever required as per site requirement. (detailed specifications as per Annexure B) | | 22.71 | Cft |
|---|
| 84 | 69 | Providing and fixing of 19mm thick ply board for basement of quarter as per following details: 15’x10’=150 sft. Job includes all machining operations, all head loads, all leads & lifts, carriages , hardware items used & skilled labour used at site. | | 150 | Sft |
|---|
| 85 | 70 | Providing and fixing of 12mm thick ply board for walls & ceiling of quarter (detailed specifications as per Annexure B) | | 612 | Sft |
|---|
| 86 | 71 | Providing of tool kit consisting of following items:\nSpanner set= 12 pieces of size 4/5,6/7,8/9,10/11,12/13,14/15,16/17,18/19,21/23,24/26,24/27,30/32\nRing set of 12 pieces of same size as above\nPliers= 2 No Cutting Pliers/Nose pliers=2 No\nScrew driver= 2 No Hammer= 01 No of 01 kg Pipe wrench= 2 No \nMultimeter= 01 No\nJob includes providing of 01 No bamboo link rod & 01 No bamboo ladder also\n | | 1 | Job |
|---|
| 87 | 72 | Providing & fitting of 12 volts 25 plate DC battery of 150 AH along with 850 Watt inverter in the operatoirs room including the cost of wiring & 03 NO. lighting points in 3/20 copper conductor with energy saver bulbs fitted in holders along with conduit. Job includes all head loads, carriages, & skilled labours involved at site. | | 1 | Job |
|---|
| 88 | 73 | Providing of thermocoal along with Exel matting for operators room of 15’x10’ size. Job includes providing of 4 No cushion 01 N0 Andus handy light 4 No plastic chairs for adults with a suitable table & crockery items/ utensils with all types of leads & carriages. | | 1 | Job |
|---|
| 89 | 74 | P/F of MUG 20 starte of L&T make. | | 2 | Job |
|---|
| 90 | 75 | P/F of 100 ampere MCCB of Havels/ L&T make enclosed in a box to be locked with a lock & key. | | 1 | Job |
|---|
| 91 | 76 | Fabrication, Providing and fitting of Modular control panel of appropriate size fabricated out of required thickness SWG sheet having required openings / vents and protection Class : 1P 55 (detailed specifications as per Annexure B) | | 1 | Job |
|---|
