Carrying Out Day-To-Day Routine Maintenance Electrical Works At Cpcl - Manali
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Mar 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Auction
Location / State
CPCL - Manali, Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Carrying Out Day-To-Day Routine Maintenance Electrical Works At Cpcl - Manali , Short Term Job Based Contract , Job Based Items , Short Term Electrical Zonal Contract For Carrying Out Routine Maintenance Activities In Various Areas Of The Refinery As Per Scope Of Work Attached , Laying Of Lt Power/ Control/ Telephone/ Plant Communication/ Cctv/ Computer And Other Cables In Trenches: Horizontal And Vertical Laying Of One Or More Armoured / Unarmoured Pijf/ Pvc Insulated And Pvc Sheathed / Xlpe Lt Power ( Voltage Grade Upto 1 . 1 Kv ) / Control/ Telephone/ Instrument/ Cctv/ Computer And Other Cables Of Following Sizes In Pre-Excavated Cable Trench Or Existing Trench / Rcc Or Hume Or Stoneware Or Metal Pipe / Masonry Duct , Supply And Fixing Of Cable Number Tag At Specified Interval And Both Ends , Testing Plus Transportation From Stores To Site , Unpacking , Straightening , Dressing Of Cable , Required Clamping Including Supply Of Clamps , And Returning The Empty Drum With Unused Cable , If Any , To Stores Etc . All Complete With Labour As Per The Drawings , Specifications And Directions Of The Engineer-In-Charge . Note: Cables And Will Be Supplied By Cpcl . Lifting/Shifting Equipment Will Be Supplied By Cpcl . , All Control Cables And Power Cables Upto 3 . 5 X 25 Sq . Mm , Power Cables Above 3 . 5 X 25 Sq . Mm Upto 3 . 5 X 95 Sq . Mm , Power Cables Above 3 . 5 X 95 Sq . Mm Upto 3 . 5 X 185 Sq . Mm , Power Cables Above 3 . 5 X 185 Sq . Mm Upto 3 . 5 X 300 Sq . Mm , 1C Cable Above 500 Sq Mm To 1000 Sq Mm , Laying Of Lt Power/ Control/ Telephone/ Instrument/ Cctv/ Computer And Other Cables On Cable Trays/ Structures Horizontal And Vertical Laying Of One Or More Armoured / Unarmoured Pilca / Pvc Insulated And Pvc Sheathed / Xlpe Lt Power ( Voltage Grade Upto 1 . 1 Kv ) / Control/ Telephone/ Instrument/ Cctv/ Computer And Other Cables On Cable Racks/ Wall And Steel Structures Upto Any Height , Supply And Fixing Of Saddles , Aluminium Strip , Supply And Fixing Of Cable Number Tag At Specified Interval And Both Ends , Testing Plus Transportation From Stores To Site , Unpacking , Straightening , Dressing Of Cable , Fixing With Clams/ Cleats Including Supply Of Clamps , As Required And Returning The Empty Drum With Unused Cable , If Any , To Stores Etc . All Complete With Labour As Per The Drawings , Specifications And Directions Of The Engineer-In-Charge . Note:Cables Will Be Supplied By Cpcl . Lifting/Shifting Equipment Will Be Supplied By Cpcl . , All Control Cables And Power Cables Upto 3 . 5 X 25 Sq . Mm , Power Cables Above 3 . 5 X 25 Sq . Mm Upto 3 . 5 X 95 Sq . Mm , Power Cables Above 3 . 5 X 95 Sq . Mm Upto 3 . 5 X 185 Sq . Mm , Power Cables Above 3 . 5 X 185 Sq . Mm Upto 3 . 5 X 300 Sq . Mm , 1C Cable Above 500 Sq Mm To 1000 Sq Mm , Ht Cable Laying On Trays/ Structures Horizontal And Vertical Laying Of One Or More Armoured / Unarmoured Pilca / Pvc Insulated And Pvc Sheathed/ Xlpe Ht Power Cables Of Voltage Grade Exceeding 1 . 1 Kv But Not Exceeding 11 Kv ( E ) Of Following Sizes In Pre-Excavated Cable Trench Or Existing Trench / Rcc Or Hume Or Stoneware Or Metal Pipe / Masonry Duct , Supply And Fixing Of Cable Number Tag At Specified Interval And Both Ends , Testing Plus Transportation From Stores To Site , Unpacking , Straightening , Dressing Of Cable , Required Clamping Including Supply Of Clamps , Cable Route Markering At A Frequent Interval And Returning The Empty Drum With Unused Cable , If Any , To Stores Etc . All Complete With Labour As Per The Drawings , Specifications And Directions Of The Engineer-In-Charge . Note: Cables Will Be Supplied By Cpcl . Lifting/Shifting Equipment Will Be Supplied By Cpcl . , Single Core , 300 Sq . Mm To 630 Sq . Mm , From 3 X 120 Sq . Mm To 3 X 185 Sq . Mm , From 3 X 240 Sq . Mm To 3 X 300 Sq . Mm , Ht Cable Laying On Trays/ Structures Horizontal And Vertical Laying Of One Or More Armoured / Unarmoured Pilca / Pvc Insulated And Pvc Sheathed/ Xlpe Ht Power Cables Of Voltage Grade Exceeding 1 . 1 Kv But Not Exceeding 11 Kv ( E ) Of Following Sizes On Cable Racks/ Wall And Steel Structures Upto Any Height , Fixing Of Saddles , Aluminium Strip , Supply Anf Fixing Of Cable Tags ( If Required ) , Testing Plus Transportation From Stores To Site , Unpacking , Straightening , Dressing Of Cable , Supply And Fixing With Clamps/ Cleats As Required And Returning The Empty Drum With Unused Cable , If Any , To Stores Etc . All Complete With Labour And Materials As Per The Drawings , Specifications And Directions Of The Engineer-In-Charge . Note:Cables Will Be Supplied By The Cpcl Free Of Cost . Lifting/Shifting Equipment Will Be Supplied By Cpcl . , Single Core , 300 Sq . Mm To 630 Sq . Mm , From 3 X 120 Sq . Mm To 3 X 185 Sq . Mm , From 3 X 240 Sq . Mm To 3 X 300 Sq . Mm , Temporary Cable Laying On Surface Temporary Laying And Fixing Of Lt Power/Control/Telephone Cables On Surface As Required Including Carriage , Handling , Testing , Cutting , Sealing , Fixing With Clamps / Cleats Etc . , Transporation Of Cable From Stores To Site And Returning The Empty Drum With Unused Cable , If Any , To Stores Etc . All Complete With Labour As Per The Drawing , Specification And Direction Of The Engineer-In-Charge . Note: Cables Will Be Supplied By Cpcl , All Control Cables And Power Cables Upto 3 . 5 X 25 Sq . Mm , Power Cables Above 3 . 5 X 25 Sq . Mm Upto 3 . 5 X 95 Sq . Mm , Power Cables Above 3 . 5 X 95 Sq . Mm Upto 3 . 5 X 185 Sq . Mm , Power Cables Above 3 . 5 X 185 Sq . Mm Upto 3 . 5 X 300 Sq . Mm , 1C Cable Above 500 Sq Mm To 1000 Sq Mm , Excavation & Back Filling Of Earth For Cable / Pipe Laying For Electrical Work , Excavation Of Earth For Cable Trenches / Laying Of G . I . Pipes For Cable Work In All Types Of Soils Including Saturated Soil Upto A Max . Depth Of 1 . 5 Metres Including Shoring , Strutting And Bailing Out Water ( If Necessary ) , Backfilling And Compacting In Layers Not Exceeding 20 Cm . Thick To The Finished Ground Level And Disposal And Dressing Of Excess Earth Within A Lead Of 50 Metres All Complete With Labour And Materials As Per Standards , Drawings , Specifications And Directions Of Engineer-In-Charge . , Gi Pipe Laying ( Excluding Cost Of Pipe ) Laying Galvanised Steel Pipes As Supplied By Cpcl In Underground Trenches , On Steel , Concrete Or Similar Structures Including Cutting , Threading , Bending , Supply & Installation Of Supports , Clamps , Small Iron Structures , Spacer , Seats , Plugs , Bush And Fittings / Fixtures Like Bends , Tees , Nipples , Reducers Etc . All Complete As Per Specification , Drawing And Direction Of Engineer-In-Charge . Item Includes Sealing Of Pipe Ends & Joints With Bushes And Bitumen Based Fillings And Such Other Miscellaneous Works So As To Make Piping Water Tight . Note: 1 . Only Gi Pipes Will Be Supplied By The Cpcl Free Of Cost . 2 . The Item Includes Transportation Of Pipes From Cpcls Store / Issue Point To The Site , Returning Unused Pipes To The Stores As Per The Direction Of Engineer-In-Charge , Upto 6 Dia , Structural Steel , Fabrication & Erection Of Ms Base Frames , Lighting Distribution Board Panels , Control Panels & Brackets For Miscellaneous Electrical Equipment Like Cable Trays And Cable Trays Supports Out Of Rolled Ms Sections , Pipes , Plates , Etc . , Including Welding , Bolting . Material Will Be Supplied By Cpcl , Lt Cable End Termination For Armoured Pvc Insulated Aluminium/Copper Cable With Single / Double Compression Brass Gland ( Excluding Cost Of Glands & Lugs ) Providing End Termination Of Power/Control Cable Including Cutting , Stripping , Glanding With Single/ Double Compression Heavy Duty Brass Cable Gland , Fixing Aluminium/Copper Lugs For Power Cables And Copper Connectors For Control Cables , Crimping/Soldering , As Necessary , Clamping Of Cable , Earthing Of Gland , Con
BOQ
| Name of Work: Carrying out day-to-day routine maintenance electrical works at CPCL-Manali | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 10 | Short Term job based contract | Item 00010 | ||
| 2 | 10.001 | Job based items | Item 10.10 | ||
| 3 | 10.002 | Short term Electrical zonal contract for carrying out routine maintenance activities in various areas of the refinery as per scope of work attached | Item 10.20 | ||
| 4 | 10.003 | LAYING OF LT POWER/ CONTROL/ TELEPHONE/ PLANT COMMUNICATION/ CCTV/ COMPUTER AND OTHER CABLES IN TRENCHES: HORIZONTAL AND VERTICAL LAYING OF ONE OR MORE ARMOURED / UNARMOURED PIJF/ PVC INSULATED AND PVC SHEATHED / XLPE LT POWER (VOLTAGE GRADE UPTO 1.1 KV)/ CONTROL/ TELEPHONE/ INSTRUMENT/ CCTV/ COMPUTER AND OTHER CABLES OF FOLLOWING SIZES IN PRE-EXCAVATED CABLE TRENCH OR EXISTING TRENCH / RCC OR HUME OR STONEWARE OR METAL PIPE / MASONRY DUCT, SUPPLY AND FIXING OF CABLE NUMBER TAG AT SPECIFIED INTERVAL AND BOTH ENDS, TESTING PLUS TRANSPORTATION FROM STORES TO SITE, UNPACKING, STRAIGHTENING, DRESSING OF CABLE, REQUIRED CLAMPING INCLUDING SUPPLY OF CLAMPS, AND RETURNING THE EMPTY DRUM WITH UNUSED CABLE, IF ANY, TO STORES ETC. ALL COMPLETE WITH LABOUR AS PER THE DRAWINGS, SPECIFICATIONS AND DIRECTIONS OF THE ENGINEER-IN-CHARGE. NOTE: CABLES AND WILL BE SUPPLIED BY CPCL. LIFTING/SHIFTING EQUIPMENT WILL BE SUPPLIED BY CPCL. | Item 10.30 | ||
| 5 | 10.004 | All control cables and power cables upto 3.5 X 25 Sq.mm | Item 10.40 | 200 | M |
| 6 | 10.005 | Power cables above 3.5 X 25 Sq.mm upto 3.5 X 95 Sq.mm | Item 10.50 | 150 | M |
| 7 | 10.006 | Power cables above 3.5 X 95 Sq.mm upto 3.5 X 185 Sq.mm | Item 10.60 | 100 | M |
| 8 | 10.007 | Power cables above 3.5 X 185 Sq.mm upto 3.5 X 300 Sq.mm | Item 10.70 | 100 | M |
| 9 | 10.008 | 1C cable above 500 Sq mm to 1000 sq mm | Item 10.80 | 60 | M |
| 10 | 10.009 | LAYING OF LT POWER/ CONTROL/ TELEPHONE/ INSTRUMENT/ CCTV/ COMPUTER AND OTHER CABLES ON CABLE TRAYS/ STRUCTURES HORIZONTAL AND VERTICAL LAYING OF ONE OR MORE ARMOURED / UNARMOURED PILCA / PVC INSULATED AND PVC SHEATHED / XLPE LT POWER (VOLTAGE GRADE UPTO 1.1 KV)/ CONTROL/ TELEPHONE/ INSTRUMENT/ CCTV/ COMPUTER AND OTHER CABLES ON CABLE RACKS/ WALL AND STEEL STRUCTURES UPTO ANY HEIGHT, SUPPLY AND FIXING OF SADDLES, ALUMINIUM STRIP, SUPPLY AND FIXING OF CABLE NUMBER TAG AT SPECIFIED INTERVAL AND BOTH ENDS, TESTING PLUS TRANSPORTATION FROM STORES TO SITE, UNPACKING, STRAIGHTENING, DRESSING OF CABLE, FIXING WITH CLAMS/ CLEATS INCLUDING SUPPLY OF CLAMPS, AS REQUIRED AND RETURNING THE EMPTY DRUM WITH UNUSED CABLE, IF ANY, TO STORES ETC. ALL COMPLETE WITH LABOUR AS PER THE DRAWINGS, SPECIFICATIONS AND DIRECTIONS OF THE ENGINEER-IN-CHARGE. NOTE:CABLES WILL BE SUPPLIED BY CPCL. LIFTING/SHIFTING EQUIPMENT WILL BE SUPPLIED BY CPCL. | Item 10.90 | ||
| 11 | 10.01 | All control cables and power cables upto 3.5 X 25 Sq.mm | Item 10.100 | 500 | M |
| 12 | 10.011 | Power cables above 3.5 X 25 Sq.mm upto 3.5 X 95 Sq.mm | Item 10.110 | 200 | M |
| 13 | 10.012 | Power cables above 3.5 X 95 Sq.mm upto 3.5 X 185 Sq.mm | Item 10.120 | 110 | M |
| 14 | 10.013 | Power cables above 3.5 X 185 Sq.mm upto 3.5 X 300 Sq.mm | Item 10.130 | 110 | M |
| 15 | 10.014 | 1C cable above 500 Sq mm to 1000 sq mm | Item 10.140 | 60 | M |
| 16 | 10.015 | HT CABLE LAYING ON TRAYS/ STRUCTURES HORIZONTAL AND VERTICAL LAYING OF ONE OR MORE ARMOURED / UNARMOURED PILCA / PVC INSULATED AND PVC SHEATHED/ XLPE HT POWER CABLES OF VOLTAGE GRADE EXCEEDING 1.1 KV BUT NOT EXCEEDING 11 KV ( E ) OF FOLLOWING SIZES IN PRE-EXCAVATED CABLE TRENCH OR EXISTING TRENCH / RCC OR HUME OR STONEWARE OR METAL PIPE / MASONRY DUCT, SUPPLY AND FIXING OF CABLE NUMBER TAG AT SPECIFIED INTERVAL AND BOTH ENDS, TESTING PLUS TRANSPORTATION FROM STORES TO SITE, UNPACKING, STRAIGHTENING, DRESSING OF CABLE, REQUIRED CLAMPING INCLUDING SUPPLY OF CLAMPS, CABLE ROUTE MARKERING AT A FREQUENT INTERVAL AND RETURNING THE EMPTY DRUM WITH UNUSED CABLE, IF ANY, TO STORES ETC. ALL COMPLETE WITH LABOUR AS PER THE DRAWINGS, SPECIFICATIONS AND DIRECTIONS OF THE ENGINEER-IN-CHARGE. NOTE: CABLES WILL BE SUPPLIED BY CPCL. LIFTING/SHIFTING EQUIPMENT WILL BE SUPPLIED BY CPCL. | Item 10.150 | ||
| 17 | 10.016 | Single core, 300 Sq.mm to 630 Sq.mm | Item 10.160 | 60 | M |
| 18 | 10.017 | From 3 x 120 Sq.mm to 3 x 185 Sq.mm | Item 10.170 | 60 | M |
| 19 | 10.018 | From 3 x 240 Sq.mm to 3 x 300 Sq.mm | Item 10.180 | 60 | M |
| 20 | 10.019 | HT CABLE LAYING ON TRAYS/ STRUCTURES HORIZONTAL AND VERTICAL LAYING OF ONE OR MORE ARMOURED / UNARMOURED PILCA / PVC INSULATED AND PVC SHEATHED/ XLPE HT POWER CABLES OF VOLTAGE GRADE EXCEEDING 1.1 KV BUT NOT EXCEEDING 11 KV( E ) OF FOLLOWING SIZES ON CABLE RACKS/ WALL AND STEEL STRUCTURES UPTO ANY HEIGHT, FIXING OF SADDLES, ALUMINIUM STRIP, SUPPLY ANF FIXING OF CABLE TAGS ( IF REQUIRED), TESTING PLUS TRANSPORTATION FROM STORES TO SITE, UNPACKING, STRAIGHTENING, DRESSING OF CABLE, SUPPLY AND FIXING WITH CLAMPS/ CLEATS AS REQUIRED AND RETURNING THE EMPTY DRUM WITH UNUSED CABLE, IF ANY, TO STORES ETC. ALL COMPLETE WITH LABOUR AND MATERIALS AS PER THE DRAWINGS, SPECIFICATIONS AND DIRECTIONS OF THE ENGINEER-IN-CHARGE. NOTE:CABLES WILL BE SUPPLIED BY THE CPCL FREE OF COST.LIFTING/SHIFTING EQUIPMENT WILL BE SUPPLIED BY CPCL. | Item 10.190 | ||
| 21 | 10.02 | Single core, 300 Sq.mm to 630 Sq.mm | Item 10.200 | 60 | M |
| 22 | 10.021 | From 3 x 120 Sq.mm to 3 x 185 Sq.mm | Item 10.210 | 30 | M |
| 23 | 10.022 | From 3 x 240 Sq.mm to 3 x 300 Sq.mm | Item 10.220 | 30 | M |
| 24 | 10.023 | TEMPORARY CABLE LAYING ON SURFACE TEMPORARY LAYING AND FIXING OF LT POWER/CONTROL/TELEPHONE CABLES ON SURFACE AS REQUIRED INCLUDING CARRIAGE, HANDLING, TESTING, CUTTING, SEALING, FIXING WITH CLAMPS / CLEATS ETC., TRANSPORATION OF CABLE FROM STORES TO SITE AND RETURNING THE EMPTY DRUM WITH UNUSED CABLE, IF ANY, TO STORES ETC. ALL COMPLETE WITH LABOUR AS PER THE DRAWING, SPECIFICATION AND DIRECTION OF THE ENGINEER-IN-CHARGE. NOTE: CABLES WILL BE SUPPLIED BY CPCL | Item 10.230 | ||
| 25 | 10.024 | All control cables and power cables upto 3.5 X 25 Sq.mm | Item 10.240 | 80 | M |
| 26 | 10.025 | Power cables above 3.5 X 25 Sq.mm upto 3.5 X 95 Sq.mm | Item 10.250 | 140 | M |
| 27 | 10.026 | Power cables above 3.5 X 95 Sq.mm upto 3.5 X 185 Sq.mm | Item 10.260 | 180 | M |
| 28 | 10.027 | Power cables above 3.5 X 185 Sq.mm upto 3.5 X 300 Sq.mm | Item 10.270 | 120 | M |
| 29 | 10.028 | 1C cable above 500 Sq mm to 1000 sq mm | Item 10.280 | 120 | M |
| 30 | 10.029 | EXCAVATION & BACK FILLING OF EARTH FOR CABLE / PIPE LAYING FOR ELECTRICAL WORK | Item 10.290 | ||
| 31 | 10.03 | Excavation of earth for cable trenches / laying of G.I. pipes for cable work in all types of soils including saturated soil upto a max. depth of 1.5 metres including shoring, strutting and bailing out water (if necessary), backfilling and compacting in layers not exceeding 20 cm. thick to the finished ground level and disposal and dressing of excess earth within a lead of 50 metres all complete with labour and materials as per standards, drawings, specifications and directions of Engineer-in-charge. | Item 10.300 | 75 | CUM |
| 32 | 10.031 | GI PIPE LAYING (EXCLUDING COST OF PIPE) LAYING GALVANISED STEEL PIPES AS SUPPLIED BY CPCL IN UNDERGROUND TRENCHES, ON STEEL, CONCRETE OR SIMILAR STRUCTURES INCLUDING CUTTING, THREADING, BENDING, SUPPLY & INSTALLATION OF SUPPORTS, CLAMPS, SMALL IRON STRUCTURES, SPACER, SEATS, PLUGS, BUSH AND FITTINGS / FIXTURES LIKE BENDS, TEES, NIPPLES, REDUCERS ETC. ALL COMPLETE AS PER SPECIFICATION, DRAWING AND DIRECTION OF ENGINEER-IN-CHARGE. ITEM INCLUDES SEALING OF PIPE ENDS & JOINTS WITH BUSHES AND BITUMEN BASED FILLINGS AND SUCH OTHER MISCELLANEOUS WORKS SO AS TO MAKE PIPING WATER TIGHT. NOTE: 1.ONLY GI PIPES WILL BE SUPPLIED BY THE CPCL FREE OF COST. 2.THE ITEM INCLUDES TRANSPORTATION OF PIPES FROM CPCL'S STORE / ISSUE POINT TO THE SITE, RETURNING UNUSED PIPES TO THE STORES AS PER THE DIRECTION OF ENGINEER-IN-CHARGE\" | Item 10.310 | ||
| 33 | 10.032 | Upto 6\" DIA | Item 10.320 | 90 | M |
| 34 | 10.033 | STRUCTURAL STEEL | Item 10.330 | ||
| 35 | 10.034 | Fabrication & erection of MS base frames, lighting distribution board panels, control panels & brackets for Miscellaneous electrical equipment like cable trays and cable trays supports out of rolled MS sections, pipes, plates, etc., including welding, bolting. Material will be supplied by CPCL | Item 10.340 | 300 | KG |
| 36 | 10.035 | LT CABLE END TERMINATION FOR ARMOURED PVC INSULATED ALUMINIUM/COPPER CABLE WITH SINGLE / DOUBLE COMPRESSION BRASS GLAND (EXCLUDING COST OF GLANDS & LUGS) PROVIDING END TERMINATION OF POWER/CONTROL CABLE INCLUDING CUTTING, STRIPPING, GLANDING WITH SINGLE/ DOUBLE COMPRESSION HEAVY DUTY BRASS CABLE GLAND, FIXING ALUMINIUM/COPPER LUGS FOR POWER CABLES AND COPPER CONNECTORS FOR CONTROL CABLES, CRIMPING/SOLDERING, AS NECESSARY, CLAMPING OF CABLE, EARTHING OF GLAND, CONNECTION TO THE EQUIPMENT TERMINALS ETC. ALL COMPLETE AS PER THE SPECIFICATIONS OF THIS TENDER AND DIRECTION OF THE ENGINEER-IN-CHARGE. CABLE GLAND AND LUGS WILL BE SUPPLIED BY CPCL. | Item 10.350 | ||
| 37 | 10.036 | All control cables and power cables upto 3.5 X 25 Sq.mm | Item 10.360 | 100 | EA |
| 38 | 10.037 | Power cables above 3.5 X 25 Sq.mm upto 3.5 X 95 Sq.mm | Item 10.370 | 100 | EA |
| 39 | 10.038 | Power cables above 3.5 X 95 Sq.mm upto 3.5 X 185 Sq.mm | Item 10.380 | 100 | EA |
| 40 | 10.039 | Power cables above 3.5 X 185 Sq.mm upto 3.5 X 300 Sq.mm | Item 10.390 | 50 | EA |
| 41 | 10.04 | 1C cable above 500 Sq mm to 1000 sq mm | Item 10.400 | 50 | EA |
| 42 | 10.041 | LT STRAIGHT THROUGH CABLE JOINT FOR ARMOURED PVC INSULATED CABLE (LABOUR ONLY) MAKING STRAIGHT THROUGH JOINTS FOR MEDIUM VOLTAGE PVC ARMOURED POWER & CONTROL CABLES (UPTO 1.1 KV GRADE), AS PER DRAWINGS, SPECIFICATIONS AND DIRECTIONS OF ENGINEER-IN-CHARGE.CABLE STRIGHT THROUGH JOINT KIT & FERRULE WILL BE SUPPLIED BY CPCL | Item 10.410 | ||
| 43 | 10.042 | All control cables and power cables upto 3.5 X 25 Sq.mm | Item 10.420 | 50 | EA |
| 44 | 10.043 | Power cables above 3.5 X 25 Sq.mm upto 3.5 X 95 Sq.mm | Item 10.430 | 50 | EA |
| 45 | 10.044 | Power cables above 3.5 X 95 Sq.mm upto 3.5 X 185 Sq.mm | Item 10.440 | 50 | EA |
| 46 | 10.045 | Power cables above 3.5 X 185 Sq.mm upto 3.5 X 300 Sq.mm | Item 10.450 | 25 | EA |
| 47 | 10.046 | 1C cable above 500 Sq mm to 1000 sq mm | Item 10.460 | 25 | EA |
| 48 | 10.047 | 11 KV (E) /6.6KV (UE) HEAT SHRINKABLE STRAIGHT THROUGH PVC/XLPE CABLE JOINTING (LABOUR ONLY) MAKING STRAIGHT THROUGH CABLE JOINT FOR POWER (PVC/XLPE) ARMOURED CABLE WITH FOLLOWING SIZES INCLUDING CUTTING, STRIPPING OF CABLE INSULATION ALL COMPLETE WITH LABOUR AS PER STANDARD AND DIRECTION OF THE ENGINEER-IN-CHARGE. JOINTING KITS & FERRULE WILL BE SUPPLIED BY CPCL. | Item 10.470 | ||
| 49 | 10.048 | 3 Core Cable upto 300 Sqmm | Item 10.480 | 1 | EA |
| 50 | 10.049 | Single Core Cable upto 1000 Sq.mm | Item 10.490 | 1 | EA |
| 51 | 10.05 | 11 KV(E)/6.6KV(UE) HEAT SHRINKABLE INDOOR PVC/XLPE CABLE END TERMINATION (LABOUR ONLY) PROVIDING END TERMINATION OF POWER CABLE INCLUDING CUTTING, STRIPPING, PROVIDING LUGS, CABLE INSULATION, PROVIDING AND GLANDING WITH SINGLE/DOUBLE COMPRESSION HEAVY DUTY BRASS CABLE GLAND CONFORMING TO IS-12943 , WHEREVER SPECIFIED, PROVIDING ALUMINIUM LUGS, CRIMPING/SOLDERING, AS NECESSARY, RESTORATION OF INSULATION/ CLAMPING OF CABLE, TAGGING WITH ALUMINIUM TAG,EARTHING OF ARMOUR, CONNECTION TO THE EQUIPMENT TERMINALS ETC. ALL COMPLETE WITH LABOUR AS PER STANDARD AND DIRECTION OF THE ENGINEER-IN-CHARGE. SUITABLE KITS & FERRULE WILL BE SUPPLIED BY CPCL. | Item 10.500 | ||
| 52 | 10.051 | 3 Core Cable upto 300 Sqmm | Item 10.510 | 1 | EA |
| 53 | 10.052 | Single Core Cable upto 1000 Sq.mm | Item 10.520 | 1 | EA |
| 54 | 10.053 | BRICK WORK IN CABLE TRENCH REMOVAL OF BRICKS FROM CABLE TRENCH WITHOUT ANY DAMAGE TO THE CABLE AND DISPOSING IT WITHIN A LEAD OF 50 METERES OR STACKING IT AT THE EDGE OF THE TRENCH AND PUTTING IT BACK INTO THE SAME TRENCH OR IN A NEW CABLE TRENCH AS PER DRAWING/ SPECIFICATION WITHIN A LEAD OF 50 METERES AFTER THE WORK IS COMPLETED INCLUDING COMPLETING THE WORK IN ALLRESPECTS WITH ALL LABOUR AND MATERIALS AS PER THE DIRECTION OF THE ENGINEER-IN-CHARGE. | Item 10.530 | ||
| 55 | 10.054 | Removal and relaying | Item 10.540 | 6 | EA |
| 56 | 10.055 | Removal and stacking only | Item 10.550 | 2 | EA |
| 57 | 10.056 | REMOVAL OF SAND FROM CABLE TRENCH | Item 10.560 | ||
| 58 | 10.057 | Removal of sand from cable trench without any damage to the cable and disposing it within a lead of 50 meteres or putting it back into the same trench or in a new cable trench as per drawing within a lead of 50 meteres all complete with labour and materials as per the direction of the Engineer-in-Charge. | Item 10.570 | 100 | CUM |
| 59 | 10.058 | REMOVAL OF RCC SLAB | Item 10.580 | ||
| 60 | 10.059 | Removal of rcc slab placed above the cable trench, handling carefully without any damage of the slab and cable beneath it and keeping it back in position after laying / removing the cable and sealing the same between rcc covers with cement & sand. job complete in all respect with labours and materials and as per direction of engineer -in-charge. | Item 10.590 | 100 | CUM |
| 61 | 10.06 | CABLE DISMANTLING / PULL OUT DISMANTLING/PULLING OUT THE LT/HT, PVC/XLPE, POWER / CONTROL / TELEPHONE / COMPUTER, ARMOURED/ UNARMOURED CABLES OF VARIOUS VOLTAGE GRADES/TYPES/ SIZES / MAKES FROM THE TRENCH (UPTO 1.5 METRES DEEP) / PIPES / STRUCTURES / RACKS OR TRAYS/SURFACE, ROLLING IT INTO EMPTY CABLE DRUMS, RETURNING THE FILLED UP CABLE DRUMS TO THE STORE/ANOTHER SITE INCLUDING TRANSPORTATION OF EMPTY CABLE DRUMS FROM STORES TO SITE AND FILLED UP CABLE DRUMS FROM SITE TO STORES/ANOTHER SITE, ETC. INCLUDING CUTTING OF CABLES AT JOINTS/ TERMINATION, DISMANTLING OF CLAMPS ETC. ALL COMPLETE WITH LABOUR AS PER DIRECTIONS OF THE ENGINEER-IN-CHARGE. LIFTING/SHIFTING EQUIPMENT WILL BE SUPPLIED BY CPCL. | Item 10.600 | ||
| 62 | 10.061 | All LV control cables and LV power cables upto 3.5 X 25 Sq.mm | Item 10.610 | 1000 | M |
| 63 | 10.062 | LV Power cables above 3.5 X 25 Sq.mm upto 3.5 X 95 Sq.mm | Item 10.620 | 400 | M |
| 64 | 10.063 | LV Power cables above 3.5 X 95 Sq.mm upto 3.5 X 185 Sq.mm | Item 10.630 | 110 | M |
| 65 | 10.064 | LV Power cables above 3.5 X 185 Sq.mm upto 3.5 X 300 Sq.mm | Item 10.640 | 45 | M |
| 66 | 10.065 | LV 1C cable above 500 Sq mm to 1000 sq mm | Item 10.650 | 13 | M |
| 67 | 10.066 | From 3 x 120 Sq.mm to 3 x 185 Sq.mm (HT) | Item 10.660 | 13 | M |
| 68 | 10.067 | From 3 x 240 Sq.mm to 3 x 300 Sq.mm (HT) | Item 10.670 | 13 | M |
| 69 | 10.068 | 1C Cable upto 1000 Sqmm (HT) | Item 10.680 | 9 | M |
| 70 | 10.069 | DISMANTLING OF ELECTRICAL WIRING | Item 10.690 | ||
| 71 | 10.07 | Electrical wiring (comprising of single or twin core PVC wires upto 6 Sq mm and single earth wire upto 6 SWG) along with its connected accessories like junction boxes, surface conduits, battons, switch boards etc. | Item 10.700 | 210 | M |
| 72 | 10.071 | DISMANTLING OF CEILING FANS AND EXHAUST FANS | Item 10.710 | ||
| 73 | 10.072 | Dismantling of all types & sizes of ceiling fans with down rod and exhaust fans of sweep 350/450 mm alongwith shutter, frame etc. without damage and returning them to our stores or any other place or site within the premises as decided by the Engineer-in-Charge. all complete with labour and materials including dismantling of supports of any type, down rods, condensers and any other accessories as per the directions of the Engineer-in-Charge. | Item 10.720 | 7 | EA |
| 74 | 10.073 | DISMANTLING OF SWITCH FUSE UNIT/FUSE UNIT/DB ETC. DISMANTLING OF SWITCH FUSE UNIT/FUSE GEAR UNIT/DB/ANY OTHER CONTROL UNITS WITHOUT USING HEAVY LIFTING EQUIPMENTS, WITHOUT ANY DAMAGE AND RETURNING IT TO OUR STORES ALL COMPLETE WITH LABOUR AND MATERIALS AS PER THE DIRECTION OF THE ENGINEER-IN-CHARGE. | Item 10.730 | ||
| 75 | 10.074 | Upto 2 Kg | Item 10.740 | 20 | EA |
| 76 | 10.075 | Above 2 Kg and upto 5 Kg | Item 10.750 | 20 | EA |
| 77 | 10.076 | Above 5 KG upto 10 KG | Item 10.760 | 20 | EA |
| 78 | 10.077 | Above 10 Kg and upto 50 Kg | Item 10.770 | 20 | EA |
| 79 | 10.078 | Above 50 Kg and upto 100 Kg | Item 10.780 | 20 | EA |
| 80 | 10.079 | DEMOLITION OF PLAIN CEMENT CONCRETE | Item 10.790 | ||
| 81 | 10.08 | Demolishing PCC concrete and disposal of material within 50 metres lead: | Item 10.800 | 3 | CUM |
| 82 | 10.081 | Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metres lead: | Item 10.810 | 1 | CUM |
| 83 | 10.082 | ROAD DISMANTLING | Item 10.820 | ||
| 84 | 10.083 | DISMANTLING OF WATER BOUND MACADUM OR BITUMINOUS ROAD, INCLUDING STACKING OF SERVICEABLE MATERIAL AND DISPOSAL OF UNSERVICEABLE MATERIAL WITHIN 50 METRES LEAD: | Item 10.830 | 1 | CUM |
| 85 | 10.084 | DISMANTLING GI PIPES IN EXTERNALWORK DISMANTLING G.I. PIPES (EXTERNAL WORK) INCLUDING EXCAVATION AND REFILLING TRENCHES AFTER TAKING OUT THE PIPES, INCLUDING STACKING OF PIPES WITHIN 50 METRES LEAD: | Item 10.840 | ||
| 86 | 10.085 | 15 mm to 40 mm nominal bore | Item 10.850 | 3 | CUM |
| 87 | 10.086 | Above 40 mm nominal bore | Item 10.860 | 2 | CUM |
| 88 | 10.087 | DISMANTLING OF POWER DISTRIBUTION EQUIPMENTS DISMANTLING OF FOLLOWING POWER DISTRIBUTION EQUIPMENTS WITHOUT ANY DAMAGE TO IT AND RETURNING IT TO OUR STORES OR REINSTALLATION IN ANY OTHER LOCATION WITHIN CPCL MANALI COMPLEX PREMISES ALL COMPLETE WITH LABOUR AND MATERIALS AS PER THE DIRECTION OF THE EIC. LIFTING/SHIFTING EQUIPMENT WILL BE SUPPLIED BY CPCL. | Item 10.870 | ||
| 89 | 10.088 | Small equipment requiring tractor trailer but not requiring crane / hydra etc. (beyond 100 kg.) | Item 10.880 | 5 | EA |
| 90 | 10.089 | Equipment weighing above 500 kg and requiring hydra and tractor trolley etc. | Item 10.890 | 5 | EA |
| 91 | 10.09 | Equipment weighing more than 3 MT and requiring crane and tractor trolley etc. | Item 10.900 | 5 | EA |
| 92 | 10.091 | CABLE DISMANTLING / PULL OUT AND RELAYING DISMANTLING/PULLING OUT THE LT/HT, PVC/XLPE, POWER / CONTROL / TELEPHONE / COMPUTER, ARMOURED/ UNARMOURED CABLES OF VARIOUS VOLTAGE GRADES/TYPES/ SIZES / MAKES FROM THE TRENCH (UPTO 1.5 METRES DEEP) / PIPES / STRUCTURES / RACKS OR TRAYS AND RELAYING AS PER DRAWING AND DIRECTION OF ENGINEER-IN CHARGE, ALL COMPLETE WITH LABOUR . JOB INCLUDES DECLAMPING, REROUTING AND RELAYING OF CABLE FOR REGLANDING ETC. LIFTING/SHIFTING EQUIPMENT WILL BE SUPPLIED BY CPCL. | Item 10.910 | ||
| 93 | 10.092 | All LV control cables and LV power cables upto 3.5 X 25 Sq.mm | Item 10.920 | 50 | M |
| 94 | 10.093 | LV Power cables above 3.5 X 25 Sq.mm upto 3.5 X 95 Sq.mm | Item 10.930 | 50 | M |
| 95 | 10.094 | LV Power cables above 3.5 X 95 Sq.mm upto 3.5 X 185 Sq.mm | Item 10.940 | 50 | M |
| 96 | 10.095 | LV Power cables above 3.5 X 185 Sq.mm upto 3.5 X 300 Sq.mm | Item 10.950 | 50 | M |
| 97 | 10.096 | LV 1C cable above 500 Sq mm to 1000 sq mm | Item 10.960 | 50 | M |
| 98 | 10.097 | Single core upto1000 Sq.mm (HT) | Item 10.970 | 50 | M |
| 99 | 10.098 | From 3 x 120 Sq.mm to 3 x 185 Sq.mm (HT) | Item 10.980 | 50 | M |
| 100 | 10.099 | From 3 x 240 Sq.mm to 3 x 300 Sq.mm (HT) | Item 10.990 | 50 | M |
| 101 | 10.1 | EARTHING OF STREET LIGHT POLES | Item 10.1000 | ||
| 102 | 10.101 | Earthing of street light poles with 2 meter long 1 inch dia GI pipe earthing electrode and connection of GI strip with earth electrode and street light pole using GI nuts, bolts, washers etc. or by welding and driving the earth electrode in earth, all complete with labour and materials as per the direction of Engineer-in-charge. GI pipe, bolt and nut shall be supplied by CPCL. | Item 10.1010 | 3 | EA |
| 103 | 10.102 | CONNECTION / DISCONNECTION OF TEMPORARY HAND LAMPS | Item 10.1020 | ||
| 104 | 10.103 | Connection and disconnection of Hand lamp/grinder/500 W flood light fittings wooden boards of different sizes with any No. of switch/sockets of different ratings, 24V transformer of capacity upto & including 500 VA etc. with flexible wire of sizes 1.5 sq.mm/2.5 sq mm / 4 sqmm including to and fro transporting it to CPCL#s store or any other place.. All complete with labour and materials as per directions of the Engineer-in-Charge. NOTE Hand lamps / flood lights / 24V transformer / flexible wire are to be supplied by CPCL. Consumables like PVC tape, CTC, cleaning cloth are to be supplied by CPCL. | Item 10.1030 | 1 | EA |
| 105 | 10.104 | FAN COMPLAINTS | Item 10.1040 | ||
| 106 | 10.105 | Attending complaints of ceiling/exhaust/wall mounted/pedestal/air circulators/any other type of fans of various sizes/makes including replacement of condensor, regulators etc. All complete with labour and materials as per directions of the Engineer-in-Charge. NOTE : Condensor and regulators will be supplied by CPCL free of cost, consumables like PVC tape, cleaning cloth, CTC etc. are to be supplied by CPCL | Item 10.1050 | 3 | EA |
| 107 | 10.106 | TEMPORARY POWER CONNECTIONS | Item 10.1060 | ||
| 108 | 10.107 | Providing temporary Electrical connection for Hydroblast machines, welding machines, temporary power boards and other electrical equipments of various rating/capacity required for shutdown with adequate cable leads including shifting of necessary materials (except power cable beyond 5 mtrs, which will be paid seperately) from store to site, cleaning these Electrical equipments before connections, making power and earth connections all complete with labour and as per the directions of Engineer-in-Charge. Note: All the above mentioned materials to be supplied by CPCL free of cost, consumables like PVC tape, CTC, cleaning cloth etc. are to be supplied by CPCL.\" as per directions of the Engineer-in-Charge. | Item 10.1070 | 10 | EA |
| 109 | 10.108 | ERECTION OF PANEL/MOTOR/EQUIPMENT ERECTION, TESTING AND COMMISSIONING OF PANEL, MOTOR AND ANY OTHER EQUIPMENT ON EXISTING FOUNDATION INCLUDING CARRIAGE FROM STORES TO THE SITE, UNPACKING, PLACING ON FOUNDATION, LEVELLING, FIXING AND FITTING OF ALL COMPONENTS, MAKING NECESSARY CONNECTIONS, PHASE CHECKING, MEGGERING AS NECESSARY ALL COMPLETE WITH LABOUR AND MATERIALS AS PER THE DIRECTION OF ENGINEER-IN-CHARGE. PACKING & SCRAP MATERIALS SHALL BE SHIFTED TO SCRAP YARD BY THE CONTRACTOR. LIFTING/SHIFTING EQUIPMENT WILL BE PROVIDED BY CPCL. | Item 10.1080 | ||
| 110 | 10.109 | Small equipment requiring tractor trailer but not requiring crane / hydra etc. (beyond 100 kg.) | Item 10.1090 | 20 | EA |
| 111 | 10.11 | Equipment, Panels,motor etc. weighing above 500 kg and requiring hydra and tractor trolley etc.but <3MT | Item 10.1100 | 20 | EA |
| 112 | 10.111 | Equipment, Panels,motor etc.weighing more than 3 MT and requiring crane and tractor trolley but <25MT | Item 10.1110 | 20 | EA |
| 113 | 10.112 | FLP ITEMS INSTALLATION, INCLUDING FABRICATION AND FIXING OF METAL CLAMPS AND SUPPORTS TO INSTALL THE FLP: CONNECTION, TESTING AND COMMISSIONING OF MISCELLANEOUS SURFACE/CHANNEL/WALL/STEEL STRUCTURES MOUNTED FLP/DIV-1 AND DIV-2 TYPE CONTROL GEAR SUCH AS PUSH BUTTON STATIONS/MOTOR CONTROL STATIONS, JUNCTION BOXES, WELDING SOCKETS, LIGHTING PANELS CONVENIENCE OUTLETS/CONVENIENCE OUTLETS WITH BUILT IN TRANSFORMER ALL COMPLETE WITH LABOUR AND MATERIALS AS PER DRAWINGS, SPECIFICATIONS AND DIRECTIONS OF ENGINEER-IN-CHARGE. NOTE: ALL THE FLP FITTINGS, CONTROL GEARS, JUNCTION BOXES ETC.& LIFTING/SHIFTING EQUIPMENT WILL BE SUPPLIED BY CPCL FREE OF COST.\" | Item 10.1120 | ||
| 114 | 10.113 | Upto 5 Kg | Item 10.1130 | 15 | EA |
| 115 | 10.114 | Above 5 Kg and upto 20 Kg | Item 10.1140 | 15 | EA |
| 116 | 10.115 | Above 20 Kg and upto 50 Kg | Item 10.1150 | 20 | EA |
| 117 | 10.116 | Above 50 Kg and upto 100 Kg | Item 10.1160 | 2 | EA |
| 118 | 10.117 | Above 100 Kg | Item 10.1170 | 1 | EA |
| 119 | 10.118 | ITC OF NON FLP ITEMS INSTALLATION, CONNECTION INCLUDING FABRICATION AND FIXING OF METAL CLAMPS AND SUPPORTS TO INSTALL THE NON FLP, TESTING AND COMMISSIONING OF MISCELLANEOUS SURFACE/CHANNEL/WALL/STEEL STRUCTURES MOUNTED NON-FLP TYPE CONTROL GEAR SUCH AS PUSH BUTTON STATIONS/MOTOR CONTROL STATIONS, JUNCTION BOXES, WELDING SOCKETS, LIGHTING PANELS CONVENIENCE OUTLETS/CONVENIENCE OUTLETS WITH BUILT IN TRANSFORMER ALL COMPLETE WITH LABOUR AND MATERIALS AS PER DRAWINGS, SPECIFICATIONS AND DIRECTIONS OF ENGINEER-IN-CHARGE. NOTE: ALL THE FITTINGS, CONTROL GEARS, JUNCTION BOXES ETC. WILL BE SUPPLIED BY CPCL FREE OF COST.\" | Item 10.1180 | ||
| 120 | 10.119 | Upto 2 Kg | Item 10.1190 | 12 | EA |
| 121 | 10.12 | Upto 2 Kg and Upto 5 Kg | Item 10.1200 | 12 | EA |
| 122 | 10.121 | Above 5 Kg and upto 20 Kg | Item 10.1210 | 12 | EA |
| 123 | 10.122 | Above 20 Kg and upto 50 Kg | Item 10.1220 | 3 | EA |
| 124 | 10.123 | Above 50 Kg and upto 100 Kg | Item 10.1230 | 2 | EA |
| 125 | 10.124 | Dismantling of battery set including removing electrolyte from cell , neutralizing it, and transporting to the store (per cell). | Item 10.1240 | 1 | EA |
| 126 | 10.125 | ATTENDING TO MISC. ELECTRICAL WORKS. | Item 10.1250 | ||
| 127 | 10.126 | Carryout miscellaneous electrical works such as breaker checking, motor stator removal,etc through one ELECT., as directed by Engineer In charge for one day i.e 8 hrs | Item 10.1260 | 100 | EA |
| 128 | 10.127 | Carryout miscellaneous electrical works such as breaker checking, motor stator removal,etc through one ASST.ELECT., as directed by Engineer In charge for one day i.e 8 hours | Item 10.1270 | 100 | EA |
| 129 | 10.128 | Carryout miscellaneous electrical works such as breaker checking, motor stator removal,etc through one UNSKILLED., as directed by Engineer In charge for one day i.e 8 hrs | Item 10.1280 | 16 | EA |
| 130 | 10.129 | Carryout miscellaneous electrical works such as breaker checking, motor stator removal,jobs in substation, etc through one ELECT., as directed by Engineer In charge during sundays , declared holidays, after office hours, extended shifts, etc for 1 hour | Item 10.1290 | 100 | EA |
| 131 | 10.13 | Carryout miscellaneous electrical works such as breaker checking, motor stator removal,jobs in substation, etc through one ASST. ELECT., as directed by Engineer In charge during sundays , declared holidays, after office hours, extended shifts, etc for 1 hour | Item 10.1300 | 100 | EA |
| 132 | 10.131 | Carryout miscellaneous electrical works such as breaker checking, motor stator removal,jobs in substation, etc through one UNSKILLED., as directed by Engineer In charge during sundays , declared holidays, after office hours, extended shifts, etc for 1 hour | Item 10.1310 | 20 | EA |
| 133 | 10.132 | REMOVAL OF CEILING FAN /EXHAUST FAN /WALL MOUNTED FAN, ETC FOR REPAIR TO WORKSHOP AND FIXING BACK AFTER REPAIRS AND COMMISSIONING | Item 10.1320 | 2 | EA |
| 134 | 10.133 | REMOVAL OF ROOF EXHAUST FAN FOR REPAI | Item 10.1330 | 1 | EA |
| 135 | 10.134 | INSTALLATION OF CEILING FAN | Item 10.1340 | ||
| 136 | 10.135 | Installation, testing and commissioning of ceiling fan and regulator including wiring the down rod of standard length (upto 30 cm) with 1.5 sqmm, PVC insulated, copper conductor, single core cable etc. as required. | Item 10.1350 | 2 | EA |
| 137 | 10.136 | EXTRA FOR LOUVERS / SHUTTERS OF EXHAUST FAN | Item 10.1360 | ||
| 138 | 10.137 | Extra for fixing the louvers / shutters complete with frame for exhaust fan of all sizes | Item 10.1370 | 1 | EA |
| 139 | 10.138 | INSTALLATION OF WALL MOUNTED FAN | Item 10.1380 | ||
| 140 | 10.139 | Fixing of wall monted fan completed with wires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of Fans shall be excluded) | Item 10.1390 | 3 | EA |
| 141 | 10.14 | INSTALLATION OF EXHAUST FAN FIXING OF EXHAUST FANS ON EXISTING OPENING, COMPLETE WITH LEAD IN WIRES AND OTHER ACCESSORIES ALL COMPLETE WITH LABOUR AND MATERIALS AS PER DIRECTION OF THE ENGINEER-IN-CHARGE. (COST OF FANS SHALL BE EXCLUDED) | Item 10.1400 | ||
| 142 | 10.141 | With Louver Shutter / Mesh | Item 10.1410 | 1 | EA |
| 143 | 10.142 | Without Louver Shutter / Mesh | Item 10.1420 | 2 | EA |
| 144 | 10.143 | FLP/IS Exhaust Fan | Item 10.1430 | 1 | EA |
| 145 | 10.144 | CABLE DRESSING CABLE DRESSING IN TRAYS/STRUCTURES/CHANNELS/WALLS ETC. DRESSING OF CABLE SHALL BE DONE WITH SUITABLE CLAMPS, FASTENERS OF G.I OR ALUMINIUM, AT AN UNIFORM INTERVAL OF 1MTR. WITH ALL MATERIAL AND LABOUR, AS PER THE INSTRUCTIONS OF EIC. | Item 10.1440 | ||
| 146 | 10.145 | Cable Trays - up to 150 mm wide | Item 10.1450 | 19 | EA |
| 147 | 10.146 | Cable Trays - 300 to 450 mm wide | Item 10.1460 | 17 | EA |
| 148 | 10.147 | Cable Trays - above 450 mm to 600 mm wide | Item 10.1470 | 5 | EA |
| 149 | 10.148 | Cable Trays - 750 mm wide | Item 10.1480 | 2 | EA |
| 150 | 10.149 | TELEPHONE CABLE END TERMINATION PROVIDING END TERMINATION OF TELEPHONE CABLE INCLUDING CUTTING, STRIPPING, CONTINUTY TESTING, CRIMPING/SOLDERING, AS NECESSARY, RESTORATION OF INSULATION/CLAMPING OF CABLE, TAGGING WITH ALUMINIUM TAG ,EARTHING OF ARMOUR, CONNECTION TO THE EQUIPMENT TERMINALS ETC. ALL COMPLETE WITH LABOUR AND MATERIALS AS PER STANDARD AND DIRECTION OF THE ENGINEER-IN-CHARGE( ONLY CABLE GLAND,IF REQUIRED, WILL BE SUPPLIED BY THE CPCL FREE OF COST ) | Item 10.1490 | ||
| 151 | 10.15 | 5 Pair | Item 10.1500 | 20 | EA |
| 152 | 10.151 | 10 Pair | Item 10.1510 | 20 | EA |
| 153 | 10.152 | 20 Pair | Item 10.1520 | 20 | EA |
| 154 | 10.153 | 50 Pair | Item 10.1530 | 20 | EA |
| 155 | 10.154 | 100 Pair | Item 10.1540 | 20 | EA |
| 156 | 10.155 | INSTALLATION OF TELEPHONE DB INSTALLATIION OF FOLLOWING TYPES OF TELEPHONE DBS ON WALLS/ STRUCTURES INCLUDING TRANSPORTATION AND SUPPLY OF ALL NECESSARY HARDWARES. ALL COMPLETE WITH LABOUR AND MATERIAL AS PER DIRECTION OF EIC. | Item 10.1550 | ||
| 157 | 10.156 | DB upto and including 20 Pair | Item 10.1560 | 1 | M |
| 158 | 10.157 | DB above 20 Pair but upto and including 100 Pair | Item 10.1570 | 1 | M |
| 159 | 10.158 | \" EARTHING WITH GI STRIP/FLAT THE SCOPE OF WORK INCLUDES INSTALLATION AND CONNECTION OF FOLLOWING GI EARTHING STRIPS ALONG THE CABLE TRENCHES OR CABLE TRAYS OR FIXING TO WALLS OR STRUCTURES AND FOR CONNECTING EQUIPMENTS TO THE PLANT GRID INCLUDING WELDING AT JOINTS, PROVIDING ANTI-CORROSIVE PAINT OR BITUMEN AND JUTE COVERING FOR WELDED PORTION, CLAMPING, INCLUDING FABRICATION AND FIXING OF METAL SUPPORTS AND CLAMPS,SUPPLY OF NECESSARY HARDWARES FOR CONNECTION ETC., INCLUDING ALL LABOUR AND MATERIALS, AS PER APPROVED DRAWINGS, SPECIFICATION OF THIS TENDER AND DIRECTION OF ENGINEER-IN-CHARGE. (GI STRIP WILL BE SUPPLIED BY CPCL)\" | Item 10.1580 | ||
| 160 | 10.159 | 75 X 10 MM GI STRIP | Item 10.1590 | 25 | M |
| 161 | 10.16 | 50 X 10 MM GI STRIP | Item 10.1600 | 25 | M |
| 162 | 10.161 | 40 X 6 MM GI STRIP | Item 10.1610 | 25 | M |
| 163 | 10.162 | 25 X 3 MM GI STRIP | Item 10.1620 | 25 | M |
| 164 | 10.163 | 25 X 6 MM GI STRIP | Item 10.1630 | 25 | M |
| 165 | 10.164 | EARTHING WITH BARE STRANDED ALUMINIUM FLEXIBLE CONDUCTOR/ GI WIRE / PVC INSULATED CABLE CORES Earthing with bare stranded GI wire/PVC Insulated Cables including connection with equipments and earth bus bar by means of GI bolts, nuts, washers, aluminium lugs etc. as per direction of Engineer-in-Charge.Only labour charges. | Item 10.1640 | ||
| 166 | 10.165 | 16 SQ. MM | Item 10.1650 | 7 | M |
| 167 | 10.166 | 25 SQ. MM | Item 10.1660 | 2 | M |
| 168 | 10.167 | 35 SQ. MM | Item 10.1670 | 9 | M |
| 169 | 10.168 | 50 SQ. MM | Item 10.1680 | 15 | M |
| 170 | 10.169 | 70 SQ. MM | Item 10.1690 | 15 | M |
| 171 | 10.17 | 185 SQ. MM | Item 10.1700 | 7 | M |
| 172 | 10.171 | REMOVAL OF TEMPORARY POWER CONNECTIONS | Item 10.1710 | ||
| 173 | 10.172 | Removal of temporary Electrical connection provided already and , shifting the removed materials from site to store or any other location as per directions of the Engineer-in-Charge. | Item 10.1720 | 40 | EA |
| 174 | 10.173 | FIXING OF MISC FIXTURES EXCLUDING PERPEX SHEET FIXING AND CONNECTION OF 250 V FLUSH TYPE ANCHOR MAKE OR APPROVED EQUIVALENT SWITCH, SOCKET BELL PUSH ETC. ON PERPEX SHEET ON MS BOX AS PER DIRECTION OF THE ENGINEER-IN-CHARGE. ONLY LABOUR CHARGES | Item 10.1730 | ||
| 175 | 10.174 | 1 way 5 / 6 amps. piano type switch with ISI mark | Item 10.1740 | 15 | EA |
| 176 | 10.175 | 2 way 5/6 amps. piano type switch with ISI mark | Item 10.1750 | 1 | EA |
| 177 | 10.176 | 1 way 15 / 16 amps. piano type switch with ISI mark | Item 10.1760 | 4 | EA |
| 178 | 10.177 | 2 pins 5 / 6 amps. Penta flush socket outlet | Item 10.1770 | 1 | EA |
| 179 | 10.178 | 3 pins 5 / 6 amps. Penta flush socket outlet | Item 10.1780 | 1 | EA |
| 180 | 10.179 | Piano type 5 pins 5 / 6 amps. socket outlet | Item 10.1790 | 15 | EA |
| 181 | 10.18 | 3 pins flush type 15 / 16 amps. socket outlet | Item 10.1800 | 2 | EA |
| 182 | 10.181 | flush type 6 pins 6 / 16 amps. Uni. socket outlet with ISI mark | Item 10.1810 | 4 | EA |
| 183 | 10.182 | 3 pins 5 / 6 amps. ISI marked polycarbonate unbreakable plug top | Item 10.1820 | 1 | EA |
| 184 | 10.183 | 3 pins 15 / 16 amps. ISI marked polycarbonate unbreakable plug top | Item 10.1830 | 2 | EA |
| 185 | 10.184 | Telephone outlet mini and connector | Item 10.1840 | 1 | EA |
| 186 | 10.185 | Telephone jack mini | Item 10.1850 | 1 | EA |
| 187 | 10.186 | Dimmer 400W / fan regulator | Item 10.1860 | 1 | EA |
| 188 | 10.187 | 2 plate ceiling rose | Item 10.1870 | 1 | EA |
| 189 | 10.188 | 3 plate ceiling rose | Item 10.1880 | 2 | EA |
| 190 | 10.189 | 6 amp 3 pins switch socket combined ISI marked | Item 10.1890 | 1 | EA |
| 191 | 10.19 | 6 amp 5 pins switch socket combined ISI marked | Item 10.1900 | 1 | EA |
| 192 | 10.191 | 16 amp 3 pins switch socket combined ISI marked | Item 10.1910 | 1 | EA |
| 193 | 10.192 | 16 amp 5 pins switch socket combined ISI marked | Item 10.1920 | 2 | EA |
| 194 | 10.193 | FIXING OF PLASTIC/METAL BOXES OF FOLLOWING SIZES WITH ALL ACCESSORIES INCLUDING NECESSSARY BASE FRAME PLATES/ MOUNTING PLATES, ETC., SUITABLE FOR FIXING DECORATIVE SWITCHES OF TYPE ROMA OR EQUIVALENT MAKE IN HAVELLS/SIEMENS/ANCHOR/L&T | Item 10.1930 | ||
| 195 | 10.194 | 1 or 2 module box | Item 10.1940 | 2 | EA |
| 196 | 10.195 | 3 module box | Item 10.1950 | 3 | EA |
| 197 | 10.196 | 4 module box | Item 10.1960 | 4 | EA |
| 198 | 10.197 | 6 module box | Item 10.1970 | 4 | EA |
| 199 | 10.198 | 8 module box | Item 10.1980 | 2 | EA |
| 200 | 10.199 | 12 module box | Item 10.1990 | 1 | EA |
| 201 | 10.2 | FIXING AND CONNECTION OF MODULAR TYPE OF ANCHOR MAKE (ROMA) OR APPROVED EQUIVALENT SWITCH, SOCKET BELL PUSH ETC IN HAVELLS/SIEMENS/ANCHOR/L&T, COMPLETE WITH LABOUR AND MATERIALS AS PER DIRECTION OF THE ENGINEER-IN-CHARGE. | Item 10.2000 | ||
| 202 | 10.201 | 10 A, 1way switch | Item 10.2010 | 5 | EA |
| 203 | 10.202 | 16A/20A, 1 way switch. | Item 10.2020 | 5 | EA |
| 204 | 10.203 | 3 pins 6/10 amps socket with ISI mark | Item 10.2030 | 5 | EA |
| 205 | 10.204 | 3 pins 16/20A, heavy duty twin socket outlet with ISI mark | Item 10.2040 | 5 | EA |
| 206 | 10.205 | RJ11 telephone jack single with shutter | Item 10.2050 | 2 | EA |
| 207 | 10.206 | Single module fan regulator 100W | Item 10.2060 | 2 | EA |
| 208 | 10.207 | RJ-45 computer socket Cat-6 with shutter & box | Item 10.2070 | 2 | EA |
| 209 | 10.208 | MCB/ISOLATOR FIXING/REPLACEMENT AND CHECKING OF MCB/ISOLATOR IN THE MCB DB. MATERIAL WILL BE SUPPLIED BY CPCL. ONLY LABOUR CHARGES. MCB/ISOLATOR RATING FROM 2A TO 100A | Item 10.2080 | ||
| 210 | 10.209 | Single pole/ Single pole and Neutral | Item 10.2090 | 5 | EA |
| 211 | 10.21 | Double pole | Item 10.2100 | 5 | EA |
| 212 | 10.211 | TP | Item 10.2110 | 5 | EA |
| 213 | 10.212 | 4P | Item 10.2120 | 5 | EA |
| 214 | 10.213 | RCCB FIXING/REPLACEMENT AND CHECKING RCCB IN THE TEMPORARY POWER BOARD / MCB DB. MATERIAL WILL BE SUPPLIED BY CPCL. ONLY LABOUR CHARGES. | Item 10.2130 | ||
| 215 | 10.214 | Double pole RCCB | Item 10.2140 | 5 | EA |
| 216 | 10.215 | Four pole RCCB | Item 10.2150 | 3 | EA |
| 217 | 10.216 | INSTALLATION OF CABLE TRAYS ERECTION OF PREFABRICATED PERFORATED GI CABLE TRAYS WITH PROVIDING REQUIRED CABLE TRAYS SUPPORTS , INCLUDING FABRICATION,WELDING, BOLTING. ETC OF FOLLOWING SIZES OF WIDTH AT ALL ELEVATION. CABLE TRAYS WILL BE SUPPLIED BY CPCL. | Item 10.2160 | ||
| 218 | 10.217 | upto 150 mm | Item 10.2170 | 30 | M |
| 219 | 10.218 | 300 mm | Item 10.2180 | 30 | M |
| 220 | 10.219 | 450 mm | Item 10.2190 | 20 | M |
| 221 | 10.22 | 650 mm | Item 10.2200 | 15 | M |
| 222 | 10.221 | 750 mm | Item 10.2210 | 7 | M |
| 223 | 10.222 | PROVIDE CANOPY IN PUSH BUTTON STATION | Item 10.2220 | ||
| 224 | 10.223 | Erection of canopies made out of 2 mm thick sheet for mounting on Push Button Stations support to render them weather proof including fabrication, mechanical assembly and supply and fixing of screws, nuts, bolts etc. and painting with 2 coats of bituminous aluminium synthetic enamel paint over a coat of red oxide primer as per the direction of Engineer-in-Charge. | Item 10.2230 | 25 | EA |
| 225 | 10.224 | MOTOR`S FANS / FAN COVERS FABRICATION & FIXING OF FAN COVERS FOR THE FOLLOWING MOTORS IN SHEET STEEL SWG INCLUDING PAINTING. SHEET MATERIAL WILL BE SUPPLIED BY CPCL | Item 10.2240 | ||
| 226 | 10.225 | Fractional to 3.7 KW | Item 10.2250 | 3 | EA |
| 227 | 10.226 | Above 3.7 KW to 5.5 KW | Item 10.2260 | 2 | EA |
| 228 | 10.227 | Above 5.5 KW to 22 KW | Item 10.2270 | 3 | EA |
| 229 | 10.228 | Repair of fan cover for above 22kw LT motors | Item 10.2280 | 4 | EA |
| 230 | 10.229 | Fabrication & fixing of HT Motors fan-guard mesh including painting; | Item 10.2290 | 2 | EA |
| 231 | 10.23 | RAIN HOODS FABRICATION & FIXING OF RAIN HOODS USING GI SHEET -SUPPLY AND FABRICATION AND FIXING INCLUDING PAINTING FOR VERTICAL MOTORS. THE RAIN HOOD SHALL COVER THE ENTIRE FRAME OF THE MOTOR, AS PER THE DIRECTIONS OF THE ENGINEER-IN-CHARGE. (SUPPLY OF GI SHEET SHALL BE PAID EXTRA FOR WHICH RATE IS AVAILABLE IN MATERIAL COMPONENTS) | Item 10.2300 | ||
| 232 | 10.231 | From fractional KW to 3.7 KW | Item 10.2310 | 3 | EA |
| 233 | 10.232 | Above 5.0 KW upto 18.5 KW | Item 10.2320 | 6 | EA |
| 234 | 10.233 | Above 18.5 KW upto 37 KW | Item 10.2330 | 1 | EA |
| 235 | 10.234 | Above 37 KW upto 55 KW | Item 10.2340 | 1 | EA |
| 236 | 10.235 | Above 55 KW upto 75 KW | Item 10.2350 | 1 | EA |
| 237 | 10.236 | Above 75.0 KW upto125.0 KW | Item 10.2360 | 1 | EA |
| 238 | 10.237 | Above 125 KW | Item 10.2370 | 1 | EA |
| 239 | 10.238 | FABRICATION & FIXING OF RAIN HOODS USING GI SHEETS FOR TERMINAL BOX OF HT MOTORS, INCLUDING PAINTING AS PER THE DIRECTION OF THE ENGINEER-IN-CHARGE. GI SHEET ONLY WILL BE SUPPLIED BY CPCL (SUPPLY OF GI SHEET SHALL BE PAID EXTRA FOR WHICH RATE IS AVAILABLE IN MATERIAL COMPONENTS) | Item 10.2380 | ||
| 240 | 10.239 | Main terminal box | Item 10.2390 | 3 | EA |
| 241 | 10.24 | Neutral Terminal box | Item 10.2400 | 3 | EA |
| 242 | 10.241 | INSTALLATION. OF INDUSTRIAL TYPE PLUG AND SOCKETS FIXING AND CONNECTION OF FOLLOWING INDUSTRIAL TYPE/METAL CLAD PLUGS / SOCKETS IN DISTRIBUTION BOARD ETC.ALL COMPLETE WITH LABOUR AS PER DIRECTION OF ENGINEER-IN-CHARGE. PLUGS AND SOCKETS WILL BE SUPPLIED BY CPCL | Item 10.2410 | ||
| 243 | 10.242 | PLUG- 2 POLE+ EARTH, 250V- 10 AMP | Item 10.2420 | 2 | EA |
| 244 | 10.243 | PLUG- 2 POLE+ EARTH, 250V- 20 AMP | Item 10.2430 | 9 | EA |
| 245 | 10.244 | PLUG- 3 POLE+ EARTH, 440V- 20/30 AMP | Item 10.2440 | 2 | EA |
| 246 | 10.245 | SOCKET- 2 POLE+ EARTH, 250V- 10 AMP | Item 10.2450 | 5 | EA |
| 247 | 10.246 | SOCKET- 2 POLE+ EARTH, 250V- 20 AMP | Item 10.2460 | 5 | EA |
| 248 | 10.247 | SOCKET- 3 POLE+ EARTH, 440V- 20/30 AMP | Item 10.2470 | 1 | EA |
| 249 | 10.248 | COMBINED INTERLOCKED SWITCH AND SOCKET- 3 POLE+ EARTH, 440V- 20/30 AMP | Item 10.2480 | 1 | EA |
| 250 | 10.249 | STENCILLING OF LETTERS & NUMBERS STENCILLING OF LETTERS/NUMBERS, AS PER THE INSTRUCTIONS OF EIC AND SYSTEM - VIII OF CPCL, INCLUDING LABOUR AND MATERIALS. | Item 10.2490 | ||
| 251 | 10.25 | Letter / Number of size up to 2.5\" | Item 10.2500 | 500 | EA |
| 252 | 10.251 | Letter / Number of size above 4\" to 6\" | Item 10.2510 | 600 | EA |
| 253 | 10.252 | ITC OF LED LIGHT FITTINGS | Item 10.2520 | ||
| 254 | 10.253 | Installation, testing and commissioning of prewired, LED light fittings of all types, ceiling / wall. LED Light Fittings will be supplied by CPCL. | Item 10.2530 | 150 | EA |
| 255 | 10.254 | REPLACEMENT AND INSTALLATION OF FLP/IS JUNCTION BOXES/FITTINGS | Item 10.2540 | ||
| 256 | 10.255 | Replacement and installation of FLP/WP fittings/boxes including removal of termination, deglanding and removal of old fitting, installation of new fitting with necessary metal supports/ clamps including fabrication of supports ans clamps , cables glanding and termination, connection, testing & commissioning of Ex'd'/Ex-e/ weather proof, 4 way junction boxes of FCG/Baliga/eq. make. Materials will be supplied by CPCL. | Item 10.2550 | 20 | EA |
| 257 | 10.256 | ITC OF BULK HEAD / WELL GLASS FITTINGS | Item 10.2560 | ||
| 258 | 10.257 | Installation, testing and commissioning of LED or Conventional bulk head/well glass fittings/ street light fittings/ flood light fittings, etc, including fixing of control gear, cable glading, termination and connection installation of new fitting with necessary metal supports/ clamps including fabrication of supports ans clamps wherever required. All materials will be supplied by CPCL. Installation height upto 6 meters. | Item 10.2570 | 45 | EA |
| 259 | 10.258 | Same as above, but Installation at a height more than 6 metres | Item 10.2580 | 12 | EA |
| 260 | 10.259 | ITC OF CONTROL GEAR BOX FOR FLOOD LIGHTING INSTALLATION, CABLE GLANDING, TERMINATION, CONNECTION, TESTING AND COMMISSIONING OF CONTROL GEAR BOX SUITABLE FOR FLOOD LIGHT/HPMV/HPSV FITTINGS INSTALLATION OF NEW FITTING WITH NECESSARY METAL SUPPORTS/ CLAMPS INCLUDING FABRICATION OF SUPPORTS AND CLAMPS. ALL MATERIALS WILL BE SUPPLIED BY CPCL. | Item 10.2590 | ||
| 261 | 10.26 | Single Fitting. | Item 10.2600 | 3 | EA |
| 262 | 10.261 | Single Fitting above 6 mtrs. Height. | Item 10.2610 | 5 | EA |
| 263 | 10.262 | Double Fitting. | Item 10.2620 | 3 | EA |
| 264 | 10.263 | Double Fitting above 6 mtrs. Height. | Item 10.2630 | 5 | EA |
| 265 | 10.264 | Dismantling of office room light fittings including tube light fittings of all types/makes including single/double tube light fittings, bulk head fittings, LED light fittings without damage and returning them to CPCL stores or any other place or site within CPCL premises as decided by the Engineer-in-Charge. all complete with labour and materials including dismantling of supports and other accessories as per the direction of EIC. The scrap materials to be shifted to scrab yard. | Item 10.2640 | 15 | EA |
| 266 | 10.265 | \"DISMANTLING OF ELECTRICAL FLP/WP FITTINGS: The scope of work includes dismantling of surface/channel/wall/steel structure mounted WP/FLP(Div-1 and Div-2) type fittings such as lighting fixtures, push button stations/motor control stations, junction boxes, welding sockets, lighting panels convenience outlets with built in transformer etc. all complete without damage and returning them to CPCL stores or any other place or site within the premises, including dismantling of any supports, poles,frames or any other structures related to the fittings upto 6 metres height, as per the specifications of this tender and directions of Engineer-in-Charge\" | Item 10.2650 | ||
| 267 | 10.266 | Weight of the unit upto 2 Kg. | Item 10.2660 | 7 | EA |
| 268 | 10.267 | Weight of the unit above 2 Kg but upto 5 Kg | Item 10.2670 | 7 | EA |
| 269 | 10.268 | Weight of the unit above 5 Kg but upto 10 Kg | Item 10.2680 | 2 | EA |
| 270 | 10.269 | Weight of the unit above 10 Kg but upto 20 Kg | Item 10.2690 | 2 | EA |
| 271 | 10.27 | SAME AS ABOVE BUT DISMANTLING OF FITTINGS ABOVE 6 MTRS. HEIGHT. | Item 10.2700 | ||
| 272 | 10.271 | Weight of the unit upto 2 Kg. | Item 10.2710 | 4 | EA |
| 273 | 10.272 | Weight of the unit above 2 Kg but upto 5 Kg | Item 10.2720 | 2 | EA |
| 274 | 10.273 | Weight of the unit above 5 Kg but upto 10 Kg | Item 10.2730 | 2 | EA |
| 275 | 10.274 | Weight of the unit above 10 Kg but upto 20 Kg | Item 10.2740 | 2 | EA |
| 276 | 10.275 | DISMANTLING STREET LIGHT POLES / PLANT LIGHT POLES | Item 10.2750 | ||
| 277 | 10.276 | Removal of corroded street light pole after safely removing it from the base and return it to the metal scrap as per the directions of EIC. | Item 10.2760 | 14 | EA |
| 278 | 10.277 | Removal of corroded plant light pole after safely removing it from the base and return it to the metal scrap as per the directions of EIC. | Item 10.2770 | 24 | EA |
| 279 | 10.278 | CLEANING OF LIGHT FITTING FIXTURES CLEANING OF BELOW GIVEN FITTING FIXTURES ALONGWITH PERFEX COVER (WHEREVER APPLICABLE) WITH THE HELP OF DETERGENT POWDER. IT INCLUDES THE REMOVAL OF PERFEX COVER, WASHING THE LIGHTING FIXTURE WITH WASHING POWDER, CLEANING WITH FRESH WATER AND CLOTHES AND REFIXING IN THE SAME POSITION | Item 10.2780 | ||
| 280 | 10.279 | MLL/HPMV/HPSV lamp of FLP /increased safety/weatherproof or any other similar fittings upto 250 W | Item 10.2790 | 15 | EA |
| 281 | 10.28 | INSTALLATION OF TEMPORARY LIGHT FITTINGS | Item 10.2800 | ||
| 282 | 10.281 | Installation of temporary light fittings (TL Fixtures/ML Lamp with holder/Halogen fitting /exhaust /pedestal /ceiling fans of different sizes/types/make, ICTPN of any rating, 1000W flood light fittings, 24V transformers or any other type of light fittings), connections etc. to and fro transportation from CPCL store to any other place all complete with labour and materials as per directions of the Engineer-in-Charge. | Item 10.2810 | 1 | EA |
| 283 | 10.282 | CONNECTION / DISCONNECTION OF TEMPORARY LIGHTS | Item 10.2820 | ||
| 284 | 10.283 | Connection or disconnection of Hand lamp/grinder/500 W flood light fittings wooden boards of different sizes with any No. of switch/sockets of different ratings, 24V transformer of capacity upto & including 500 VA etc. with flexible wire of sizes 1.5 sq.mm/2.5 sq mm / 4 sqmm including to and fro transporting it to Owner#s store or any other place.. All complete with labour and materials as per directions of the Engineer-in-Charge. NOTE Hand lamps / flood lights / 24V transformer / flexible / consumables / wire will be supplied by CPCL. . | Item 10.2830 | 24 | EA |
| 285 | 10.284 | FAULT IDENTIFICATION & RECTIFICATION IDENTIFICATION OF FAULTS IN THE FOLLOWING :- UPTO IDENTIFICATION ONLY. FOR REPLACEMENT OF SPARES CHARGES WILL BE PAID SEPARATELY. ONLY LABOUR CHARGES. ALL FIXING COVER BOLTS TO BE TIGHTENED PROPERLY WITHOUT MISSING SINGLE BOLT. | Item 10.2840 | ||
| 286 | 10.285 | Tube light fittings,bulk head fittings either LED or conventional, etc in buildings, office rooms, control rooms, etc. | Item 10.2850 | 20 | EA |
| 287 | 10.286 | FLP/increased safety and weatherproof upto 250 W lamps in plant areas. | Item 10.2860 | 20 | EA |
| 288 | 10.287 | Control gear boxes of HPMV /HPSV lamp fittings upto 250W. | Item 10.2870 | 21 | EA |
| 289 | 10.288 | FLDMs/highway fittings/street light fittings/ lighting tower, etc. | Item 10.2880 | 5 | EA |
| 290 | 10.289 | High Mast Lighting fittings and Aviation light fittings | Item 10.2890 | 5 | EA |
| 291 | 10.29 | RECTIFICATION OF COMPLAINTS / REPLACEMENT OF COMPONENTS, GLASS COVERS ETC. ATTENDING AND RECTIFICATION OF COMPLAINT OF THE FOLLOWING: NOTE: ALL MATERIALS & ACCESSORIES OF FITTINGS REQUIRED FOR ATTENDING THE COMPLAINT SHALL BE SUPPLIED BY CPCL FREE OF COST. THE CONTRACTOR HAS TO TAKE THE MATERIAL FROM CENTRAL STORE/DEPARTMENTAL STORE/SITE FOR ATTENDING ABOVE COMPLAINTS. THE DEFECTIVE MATERIAL ARE TO BE RETURNED TO THE DEPT. STORES. ALL FIXING COVER BOLTS TO BE TIGHTENED PROPERLY WITHOUT MISSING SINGLE BOLT. MISSING FASTNERS TO BE REPLACED BY THE CONTRACTOR ON FREE OF COST. ALSO APPLICATION OF M-SEAL OR ANY OTHER SEALING COMPOUNDS ON ABOVE FITTINGS TO PREVENT ENTERING OF WATER/INSECTS AS PER DIRECTION OF THE ENGINEER-IN-CHARGE. | Item 10.2900 | ||
| 292 | 10.291 | Tube light fittings including replacement of chokes, tubes, down rods, starters, starter holder, Tube rod and holders and all other accessories if needed including cleaning of the light fittings if required, as per direction of the Engineer-in-Charge | Item 10.2910 | 750 | EA |
| 293 | 10.292 | Wiring modification in the existing conventional tube light fitting to retrofit with LED tubes. All materials will be supplied by CPCL | Item 10.2920 | 550 | EA |
| 294 | 10.293 | LED tube light fittings. Trouble shooting of existing LED tube light fittings and replacement of LED tube if required. All materials will be supplied by CPCL | Item 10.2930 | 167 | EA |
| 295 | 10.294 | FLP/increased safety and weatherproof upto 250 W lamps including replacement of lamps, lamp holders, connectors, glass & other accessories etc. including external and internal cleaning of glass and complete fittings as well as other related job involved. | Item 10.2940 | 1600 | EA |
| 296 | 10.295 | Control gear boxes of HPMV lamp fittings upto 250W including replacement of chokes, condensers, fuses, holders, fuse base, wiring or any other accessories of control gear box, as per directions of the Engineer-in-Charge | Item 10.2950 | 42 | EA |
| 297 | 10.296 | FLDMs/highway fittings/street light fittings including replacement of lamps, tubes, ignitors, chokes, capacitors, fuses, fuse holders, gasket, providing/extension rod on lamp holder glass including cleaning of glass or any other accessories required. | Item 10.2960 | 120 | EA |
| 298 | 10.297 | Chimney Aviation light fittings including replacement of lamps, lamp cover, lamp holder or any other job required for the completion of this job, as per directions of the Engineer-in-Charge. | Item 10.2970 | 7 | EA |
| 299 | 10.298 | CIRCUIT FAULT RECTIFICATION | Item 10.2980 | ||
| 300 | 10.299 | Carryout miscellaneous lighting works, including unit shutdown power provosion, through one ASST.ELECT. as directed by Engineer In charge for 4 hours | Item 10.2990 | 3 | EA |
| 301 | 10.3 | Carryout miscellaneous lighting works through one ASST.ELECT. as directed by Engineer In charge during sundays , declared holidays, after general shift hours, extended shifts, etc for 1 hour | Item 10.3000 | 84 | EA |
| 302 | 10.301 | ERECTION OF LIGHT POLES. | Item 10.3010 | ||
| 303 | 10.302 | Erection of street poles in all type of soils, as per the instruction of EIC. Poles, crane, transportation will be supplied by CPCL. Shifting of poles from CPCL stores, civil work, bailing out water, positioning, civil and all other materials are in contractor's scope. Excavation of earth up to a size of 1.5 m x 0.75 m x 0.75 m. Mixing of PCC (1:4:8), filling, packing and coping up to a uniform height. | Item 10.3020 | 7 | EA |
| 304 | 10.303 | As above for 5 mtr. Plant Light Pole, but concrete size of 0.5m x 0.5m x 0.5 mtr. | Item 10.3030 | 2 | EA |
| 305 | 10.304 | Erection of 3 mtr. Plant Light Pole by clamping & welding as per the directions of EIC. All materials are in the scope of the contractor, except light poles. | Item 10.3040 | 7 | EA |
| 306 | 10.305 | REMOVAL/RECONDITIONING &RESTORATION OF PLANT LIGHT POLES. REMOVAL OF CORRODED POLE AFTER SAFELY REMOVING THE LIGHT FITTING, SHIFTING TO WORKSHOP, FABRICATION &WELDING THE DAMAGED PORTION AND REINSTALLATION AT SITE. FIXING BACK THE OLD/NEW FITTING, WIRING AND COMMISSIONING AS PER THE DIRECTIONS OF EIC. ALL MATERIALS WILL BE SUPPLIED BY CPCL, EXCEPT WELDING MACHINE, WELDING RODS, CONSUMABLE AND REQUIRED PAINTING MATERIALS. | Item 10.3050 | ||
| 307 | 10.306 | Plant Light Pole size: 3 mtr. | Item 10.3060 | 17 | EA |
| 308 | 10.307 | COPING UP OF STREET LIGHT POLES | Item 10.3070 | ||
| 309 | 10.308 | This job is to be executed for the existing poles safely. Chipping and breaking of existing concrete. Thorough cleaning of the concreted surface, applying one coat of anti corrosive paint, strenghthening with addional support and coping up with PCC (1:4:8) up to a height of 0.75 mtr. and 0.5 m dia or square as instructed by EIC. All other materials including anti corrosive paints are in contractor's scope. | Item 10.3080 | 3 | EA |
| 310 | 10.309 | HIGH MAST TOWER JOBS: NOTE: MATERIALS LIKE LIGHTING FIXURE, ACCESSORIES, FIXURE CABLES, EARTHING MATERIAL, CABLES AND ASSOCIATED CABLE GLANDS, SHALL BE SUPPLIED BY CPCL | Item 10.3090 | ||
| 311 | 10.31 | Dismantling of High mast tower light of 30Mtr high: Job involves removal of light fittings, lantern carriage and storing the mast in a safer place as directed by the Engineer-in-charge, cost including labour and material. | Item 10.3100 | 1 | EA |
| 312 | 10.311 | Erection and Commissioning: Job involves carrying of dismantled mast from the storage area, erection, testing and commissioning of high mast lighting system | Item 10.3110 | 1 | EA |
| 313 | 10.312 | Repair and replacement of steel rope | Item 10.3120 | 1 | EA |
| 314 | 10.313 | Repair and Replacement of cable | Item 10.3130 | 1 | EA |
| 315 | 10.314 | Winch overhauling | Item 10.3140 | 1 | EA |
| 316 | 10.315 | Motor overhauling | Item 10.3150 | 1 | EA |
| 317 | 10.316 | Servicing of High Mast tower | Item 10.3160 | 2 | EA |
| 318 | 10.317 | Erection of street light pole in existing foundation: Job involves shifting of street light pole to the site and ercting in the existing foundation. Poles, crane, transportation will be supplied by CPCL | Item 10.3170 | 2 | EA |
| 319 | 10.318 | Erection of FRP/GRP street light pole in existing foundation: Job involves shifting of street light pole to the site and ercting in the existing foundation. Poles, crane, transportation will be supplied by CPCL | Item 10.3180 | 22 | EA |
| 320 | 10.319 | Removal of street light pole from existing foundation and returning it to the scrap or shift it to workshop for fabrication or to a storage place as directed by the Engineer- in-charge. Lifting/Shifting equipment will be supplied by CPCL. | Item 10.3190 | 1 | EA |
| 321 | 10.32 | PAINTING OF LIGHT POLE PAINTING SHALL BE AFTER CLEANING OF THE REQUIRED SURFACE TO MAKE FREE FROM DUST, OIL, GREASE ETC. TWO COATS OF SYNTHETIC ENAMEL PAINT UNIFORMLY COVERING THE ENTIRE SURFACE. THE EXISTING CABLES SHALL BE REMOVED AND FIXED BACK AFTER PAINTING, AS PER THE INSTRUCTIONS OF EIC, INCLUDING COST ALL MATREIALS AND CONSUMABLES IN VENDOR'S SCOPE. THE PAINT SHALL BE OF ASIAN/ BERGER/ GOODLASS NEROLAC MAKES ONLY. | Item 10.3200 | ||
| 322 | 10.321 | Upto 3m Height | Item 10.3210 | 26 | EA |
| 323 | 10.322 | Above 3m Height | Item 10.3220 | 7 | EA |
| 324 | 10.323 | SPREADING OF SAND | Item 10.3230 | ||
| 325 | 10.324 | Spreading of approved fine river sand in cable trench as per the direction of Engineer-in-charge. | Item 10.3240 | 1 | CUM |
| 326 | 10.325 | LAYING OF BRICKS | Item 10.3250 | ||
| 327 | 10.326 | Laying of approved 2nd class bricks of thickness 75 mm in cable trench for cable protection as per the direction of Site-in-chrg | Item 10.3260 | 5 | CUM |
| 328 | 10.327 | COPPER WIRING IN EXISTING CONDUIT / CASING CAPING DRAWING FOLLOWING SIZE OF PVC INSULATED, COPPER CONDUCTOR, SINGLE CORE CABLE IN THE EXISTING SURFACE / RECESSED, PVC / STEEL CONDUIT / PVC CASING AND CAPPING AS REQUIRED. | Item 10.3270 | ||
| 329 | 10.328 | 1 x 1.5 sq.mm | Item 10.3280 | 60 | M |
| 330 | 10.329 | 2 x 1.5 sq.mm | Item 10.3290 | 20 | M |
| 331 | 10.33 | 3 x 1.5 sq.mm | Item 10.3300 | 14 | M |
| 332 | 10.331 | 1 x 2.5 sq.mm | Item 10.3310 | 18 | M |
| 333 | 10.332 | 2 x 2.5 sq.mm | Item 10.3320 | 50 | M |
| 334 | 10.333 | 3 x 2.5 sq.mm | Item 10.3330 | 28 | M |
| 335 | 10.334 | 2 x 4 sq.mm | Item 10.3340 | 100 | M |
| 336 | 10.335 | 3 x 4 sq.mm | Item 10.3350 | 5 | M |
| 337 | 10.336 | FIXING OF PVC CONDUIT ON SURFACE FIXING OF FOLLOWING SIZE OF PVC CONDUIT ALONGWITH THE ACCESSORIES IN SURFACE INCLUDING CUTTING THE WALL AND MAKING GOOD THE SAME IN CASE OF RECESSED, CONDUIT AS REQUIRED:NOTE: ONLY ISI MARKED CONDUITS SHALL BE USED.\" | Item 10.3360 | ||
| 338 | 10.337 | 20 mm | Item 10.3370 | 250 | M |
| 339 | 10.338 | 25 mm | Item 10.3380 | 52 | M |
| 340 | 10.339 | 40 mm | Item 10.3390 | 2 | M |
| 341 | 10.34 | 50 mm | Item 10.3400 | 2 | M |
| 342 | 10.341 | FIXING OF PVC CASING / CAPING FIXING FOLLOWING SIZE OF PVC CASING AND CAPING ON SURFACE AS REQUIRED. NOTE: ONLY ISI MARKED CAPING AND CASING SHALL BE USED. FIXING OF PVC CASING / CAPING | Item 10.3410 | ||
| 343 | 10.342 | 15 mm x 10 mm | Item 10.3420 | 2 | M |
| 344 | 10.343 | 20 mm x 10 mm | Item 10.3430 | 1 | M |
| 345 | 10.344 | 25 mm x 10 mm | Item 10.3440 | 42 | M |
| 346 | 10.345 | 30 mm x 10 mm | Item 10.3450 | 1 | M |
| 347 | 10.346 | 40 mm x 20 mm | Item 10.3460 | 1 | M |
| 348 | 10.347 | 50 mm x 20 mm | Item 10.3470 | 1 | M |
| 349 | 10.348 | FIXING OF METAL BOXES WITH PHENOLIC SHEET ON SURFACE FIXING OF METAL BOX OF FOLLOWING SIZE (NOMINAL) ON SURFACE WITH SUITABLE SIZE OF PHENOLIC LAMINATED SHEET COVER IN THE FRONT INCLUDING PAINTING ETC. AS REQUIRED. | Item 10.3480 | ||
| 350 | 10.349 | 75 mm x 75 mm x 60 mm deep | Item 10.3490 | 1 | EA |
| 351 | 10.35 | 100 mm x 100 mm x 60 mm deep | Item 10.3500 | 2 | EA |
| 352 | 10.351 | 150 mm x 100 mm x 60 mm deep | Item 10.3510 | 2 | EA |
| 353 | 10.352 | 150 mm x 150 mm x 60 mm deep | Item 10.3520 | 1 | EA |
| 354 | 10.353 | 180 mm x 100 mm x 60 mm deep | Item 10.3530 | 1 | EA |
| 355 | 10.354 | 200 mm x 125 mm x 60 mm deep | Item 10.3540 | 2 | EA |
| 356 | 10.355 | 200 mm x 150 mm x 60 mm deep | Item 10.3550 | 1 | EA |
| 357 | 10.356 | 200 mm x 150 mm x 75 mm deep | Item 10.3560 | 1 | EA |
| 358 | 10.357 | 200 mm x 250 mm x 75 mm deep | Item 10.3570 | 1 | EA |
| 359 | 10.358 | 200 mm x 150 mm x 100 mm deep | Item 10.3580 | 1 | EA |
| 360 | 10.359 | 200 mm x 250 mm x 100 mm deep | Item 10.3590 | 1 | EA |
| 361 | 10.36 | 200 mm x 300 mm x 100 mm deep | Item 10.3600 | 1 | EA |
| 362 | 10.361 | 250 mm x 300 mm x 100 mm deep | Item 10.3610 | 1 | EA |
| 363 | 10.362 | 450 mm x 300 mm x 75 mm deep | Item 10.3620 | 2 | EA |
| 364 | 10.363 | 300 mm x 300 mm x 75 mm deep | Item 10.3630 | 1 | EA |
| 365 | 10.364 | 200 mm x 300 mm x 75 mm deep | Item 10.3640 | 1 | EA |
| 366 | 10.365 | 150 mm x 100 mm x 75 mm deep | Item 10.3650 | 1 | EA |
| 367 | 10.366 | 350 mm x 300 mm x 75 mm deep | Item 10.3660 | 1 | EA |
| 368 | 10.367 | Fixing of Sunmica/Hylem sheet cover of required cutout for mounting on boards, DBs similar type of electrical installation or wherever required as per directions of Engineer-in-Charge. The job includes the finishing and mounting of the cutout sheet. All complete with labour as per directions of Engineer-in-Charge. Minimum thickness of Hylem sheet shall be 2mm. | Item 10.3670 | ||
| 369 | 10.368 | Fixing of Sunmica/Hylem sheet cover of required cutout for mounting on boards, DBs similar type of electrical installation or wherever required as per directions of Engineer-in-Charge. The job includes the finishing and mounting of the cutout sheet. All complete with labour as per directions of Engineer-in-Charge. Minimum thickness of Hylem sheet shall be 2mm. | Item 10.3680 | 1 | EA |
| 370 | 10.369 | Metal box light plug of 180 mm x 100 mm x 60 mm with 3 pin 15/16 amps. switch socket | Item 10.3690 | 1 | EA |
| 371 | 10.37 | Fixing of 4 numbers of 250V, 6 Pin, 5/15 A flush mounted switch socket combine of Anchor / Record make in a 12\" x 12\" metal box , with a fuse out-out power on indication bulb including necessary internal wiring and input wire with the length of 3 meters and plug connection and commissioning. | Item 10.3700 | 5 | EA |
| 372 | 10.371 | 20 A SPN. MCB INDUSTRIAL SOCKET OUTLET | Item 10.3710 | ||
| 373 | 10.372 | Supplying and fixing 20 amps., 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps. G-series, SP,MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Note:ISI marked sockets shall be used. | Item 10.3720 | 2 | EA |
| 374 | 10.373 | 30 A TPN MCB INDUSTRIAL SOCKET OUTLET | Item 10.3730 | ||
| 375 | 10.374 | Fixing 30 amps., TPN, industrial type socket outlet, with 4 pole and earth metal enclosed, plug top, alongwith 30 amps. G-series, TP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Note: ISI marked sockets shall be used. | Item 10.3740 | 1 | EA |
| 376 | 10.375 | INSTALLATION OF MOTOR STARTER INSTALLATION OF L&T / SIEMENS OR EQUIVALENT MAKE DOL MOTOR STARTER (WITH ALL ACCESSORRIES INCLUDING O/L RELAY ETC.) CONFIRMING TO IS:13947-4 ON WALLS/STEEL STRUCTURE, CONNECTION OF CABLES ALL COMPLETE WITH LABOUR AS PER DIRECTION OF THE ENGINEER-IN-CHARGE | Item 10.3750 | ||
| 377 | 10.376 | UPTO 5.5KW | Item 10.3760 | 1 | EA |
| 378 | 10.377 | 7.5KW | Item 10.3770 | 1 | EA |
| 379 | 10.378 | 11KW | Item 10.3780 | 1 | EA |
| 380 | 10.379 | INSTALLATION OF ELMEX TERMINALS INSTALLATION OF ELMEX TERMINALS WHEREVER REQUIRED | Item 10.3790 | ||
| 381 | 10.38 | 2.5 Sq.mm Elmex Connector | Item 10.3800 | 2 | EA |
| 382 | 10.381 | 6 Sq.mm Elmex Connector | Item 10.3810 | 2 | EA |
| 383 | 10.382 | 10 Sq.mm Elmex Connector | Item 10.3820 | 2 | EA |
| 384 | 10.383 | 16 Sq.mm Elmex Connector | Item 10.3830 | 1 | EA |
| 385 | 10.384 | DIN CHANNELS FOR ELMEX TERMINALS | Item 10.3840 | ||
| 386 | 10.385 | Fixing of channels for elmex type terminals wherever required | Item 10.3850 | 1 | M |
| 387 | 10.386 | TELEPHONE CABLE LAYING IN EXISTING CONDUIT LAYING OF FLEXIBLE UNARMOURED TELEPHONE WIRE UPTO 0.9 MM CONDUCTOR DIA IN EXISTING SURFACE OR RECESSED, IN STEEL / PVC CONDUIT, PVC CASING AND CAPPING AS REQUIRED ALL COMPLETE WITH LABOUR AND AS PER THE DIRECTION OF THE ENGINEER-IN-CHARGE | Item 10.3860 | ||
| 388 | 10.387 | Telephone Wiring - 1 Pair | Item 10.3870 | 470 | M |
| 389 | 10.388 | Telephone Wiring- 2 Pair | Item 10.3880 | 167 | M |
| 390 | 10.389 | Telephone Wiring- 10 Pair | Item 10.3890 | 4 | M |
| 391 | 10.39 | Telephone Wiring - 20 Pair | Item 10.3900 | 4 | M |
| 392 | 10.391 | TELEPHONE DB BOX ( KRONE TYPE ) FIXING OF INDOOR TYPE SUITABLE FOR CONCEALED/SURFACE MOUNTING, TELEPHONE END TERMINATION/ DISTRIBUTION BOX OF CAST ALUMINIUM (KRYTONE TYPE) OF REPUTED MAKE ALL COMPLETE WITH LABOUR AS PER THE DIRECTION OF THE ENGINEER-IN-CHARGE. | Item 10.3910 | ||
| 393 | 10.392 | 5 Pair KRONE TYPE DB BOX | Item 10.3920 | 1 | EA |
| 394 | 10.393 | 10 Pair KRONE TYPE DB BOX | Item 10.3930 | 1 | EA |
| 395 | 10.394 | 20 Pair KRONE TYPE DB BOX | Item 10.3940 | 1 | EA |
| 396 | 10.395 | 50 Pair KRONE TYPE DB BOX | Item 10.3950 | 1 | EA |
| 397 | 10.396 | 100 Pair KRONE TYPE DB BOX | Item 10.3960 | 1 | EA |
| 398 | 10.397 | FABRICATION & FIXING OF RAIN HOODS FABRICATION & FIXING OF RAIN HOODS USING 2 MM THICK GI SHEET INCLUDING SUPPLY OF GI SHEETS AND PAINTING FOR FOLLOWING AS PER THE DIRECTIONS OF THE ENGINEER-IN-CHARGE. (SUPPLY OF GI SHEET SHALL BE PAID EXTRA FOR WHICH RATE IS AVAILABLE IN MATERIAL COMPONENTS) | Item 10.3970 | ||
| 399 | 10.398 | Push button stations With ammeter | Item 10.3980 | 3 | EA |
| 400 | 10.399 | Push button stations Without ammeter | Item 10.3990 | 3 | EA |
| 401 | 10.4 | Neumann call stations | Item 10.4000 | 2 | EA |
| 402 | 10.401 | Welding receptacle | Item 10.4010 | 2 | EA |
| 403 | 10.402 | Plant LDB | Item 10.4020 | 2 | EA |
| 404 | 10.403 | Street Light JB | Item 10.4030 | 2 | EA |
| 405 | 10.404 | Telephone JB | Item 10.4040 | 2 | EA |
| 406 | 10.405 | 125 A SFU | Item 10.4050 | 2 | EA |
| 407 | 10.406 | FABRICATION WELDING AND PAINTING OF STREET LIGHT POLES AND FLOOD LIGHT POLES AS PER DIRECTION OF EIC. ONLY LABOUR CHARGES AND PIPE MATERIALS WILL BE SUPPLIED BY CPCL | Item 10.4060 | ||
| 408 | 10.407 | Upto 5m height | Item 10.4070 | 2 | EA |
| 409 | 10.408 | 6m to 9m height | Item 10.4080 | 2 | EA |
| 410 | 10.409 | Fabrication welding and painting of street light junction box . Only labour charges and material will be supplied by CPCL | Item 10.4090 | 2 | EA |
| 411 | 10.41 | Fabrication welding and painting of SFU adaptor box. Only labour charges and material will be supplied by CPCL | Item 10.4100 | 2 | EA |
| 412 | 10.411 | PAINTING PAINTING OF PUSH BUTTON / CONTRL STATIONS/ CABLE TRAYS/ LIGHT FITINGS/ JUNCTION BOXES/ LIGHT POLES ETC., PAINTING SHALL BE AFTER CLEANING OF THE REQUIRED SURFACE TO MAKE FREE FROM DUST, OIL, GREASE ETC. TWO COATS OF SYNTHETIC ENAMEL PAINT UNIFORMLY COVERING THE ENTIRE SURFACE. WHEN PAINTING ON TRAYS, THE EXISTING CABLES SHALL BE REMOVED AND FIXED BACK AFTER PAINTING, AS PER THE INSTRUCTIONS OF EIC, INCLUDING COST ALL MATREIALS AND CONSUABLES IN VENDOR'S SCOPE. THE PAINT SHALL BE OF ASIAN/ BERGER/ GOODLASS NEROLAC MAKES ONLY. | Item 10.4110 | ||
| 413 | 10.412 | Push Button/ Control Stations with stand of 1.0 to 1.5 mtrs. height | Item 10.4120 | 10 | EA |
| 414 | 10.413 | Cable Trays - up to 150 mm wide | Item 10.4130 | 35 | EA |
| 415 | 10.414 | Cable Trays - 300 to 450 mm wide | Item 10.4140 | 75 | EA |
| 416 | 10.415 | Cable Trays - above 450 mm to 600mm wide | Item 10.4150 | 75 | EA |
| 417 | 10.416 | Cable Trays - 750 mm wide | Item 10.4160 | 35 | EA |
| 418 | 10.417 | Plant Light Fiitings | Item 10.4170 | 110 | EA |
| 419 | 10.418 | Junction Boxes | Item 10.4180 | 110 | EA |
| 420 | 10.419 | Plant Light Poles - 3 mtrs. Height | Item 10.4190 | 15 | EA |
| 421 | 10.42 | Plant Lighting JB Size 300*300*225 mm | Item 10.4200 | 7 | EA |
| 422 | 10.421 | Welding Receptical painting | Item 10.4210 | 7 | EA |
| 423 | 10.422 | SUPPLY OF 20 FEET TRAILER | Item 10.4220 | ||
| 424 | 10.423 | The scope of work includes supply of 20 Feet Trailer (Minimum 10 MT Capacity) With Tractor on hire basis as and when required by Engineer-in-Charge on 8 hrs shift basis for shifting of materials/metal & wooden scraps/cables, for erection of street light pole, panels, lifting & shifting of motors within CPCL Premises. The rate is inclusive of Driver, one Assistant, Consumables like Diesel/fuel/oil lubricants etc., with all safety Instruments as per the specifications of this tender and directions of Engineer-In-Charge. All required Tools, Tackles, Wire Ropes, Pulley Blocks, Belts, Chains etc., for Lifting, Aligning,Tying, Stacking Shall be arranged by the contractor. | Item 10.4230 | 1 | DAY |
| 425 | 10.424 | SUPPLY OF HYDRA CRANE 12 MT | Item 10.4240 | ||
| 426 | 10.425 | The scope of work includes supply of hydra crane with front cabin of capacity min 12 MT on hire basis as and when required by Engineer-in-Charge on 8 hrs shift basis for shifting of materials/metal & wooden scraps/cables, for erection of street light pole, panels, lifting & shifting of motors within CPCL Premises. The rate is inclusive of Driver, one Assistant, Consumables like Diesel/fuel/oil lubricants etc., with all safety Instruments as per the specifications of this tender and directions of Engineer-In-Charge. All required Tools, Tackles, Wire Ropes, Pulley Blocks, Belts, Chains etc., for Lifting, Aligning,Tying, Stacking Shall be arranged by the contractor. | Item 10.4250 | 1 | DAY |
| 427 | 10.426 | The scope of work includes Liaisoning work for obtaining CEA approval/re-approval for all electrical equipments substation, plant area and other buildings based on the credentials furnished by the equipment suppliers, test reports etc., including submission of required applications, application fee, liasioning and all other related activities and as per the instructions of Engineer-in-Charge. | Item 10.4260 | 1 | L |
| 428 | 10.427 | Painting of metal surfaces | Item 10.4270 | ||
| 429 | 10.428 | One coat primer | Item 10.4280 | 75 | SQM |
| 430 | 10.429 | 2 coat enamel paint colour as instructed by EIC | Item 10.4290 | 75 | SQM |
| 431 | 10.43 | \"TEMPORARY CABLE REMOVAL WHCH WAS LAYED ON SURFACE REMOVAL OF TEMPORARY LT/HT POWER/CONTROL/TELEPHONE CABLES ON SURFACE AS REQUIRED INCLUDING CARRIAGE, HANDLING, TESTING, CUTTING, SEALING, REMOVING THE CLAMPS / CLEATS ETC., ROLLING THE THE CABLES IN DRUM, TRANSPORATION OF CABLE FROM SITE TO STORES AND RETURNING THE CABLE DRUM WITH USED CABLE, TO STORES ETC. ALL COMPLETE WITH LABOUR AS PER THE DRAWING, SPECIFICATION AND DIRECTION OF THE ENGINEER-IN-CHARGE. NOTE: CABLES DRUM WILL BE SUPPLIED BY CPCL\" | Item 10.4300 | ||
| 432 | 10.431 | All LV control cables and LV power cables upto 3.5 X 25 Sq.mm | Item 10.4310 | 5 | M |
| 433 | 10.432 | LV Power cables above 3.5 X 25 Sq.mm upto 3.5 X 95 Sq.mm | Item 10.4320 | 5 | M |
| 434 | 10.433 | LV Power cables above 3.5 X 95 Sq.mm upto 3.5 X 185 Sq.mm | Item 10.4330 | 5 | M |
| 435 | 10.434 | LV Power cables above 3.5 X 185 Sq.mm upto 3.5 X 300 Sq.mm | Item 10.4340 | 5 | M |
| 436 | 10.435 | LV 1C cable above 500 Sq mm to 1000 sq mm | Item 10.4350 | 5 | M |
| 437 | 10.436 | Single core upto1000 Sq.mm (HT) | Item 10.4360 | 5 | M |
| 438 | 10.437 | From 3 x 120 Sq.mm to 3 x 185 Sq.mm (HT) | Item 10.4370 | 5 | M |
| 439 | 10.438 | From 3 x 240 Sq.mm to 3 x 300 Sq.mm (HT) | Item 10.4380 | 5 | M |
| 440 | 10.439 | LT CABLE DISCONNECTION AND GLAND REMOVAL | Item 10.4390 | ||
| 441 | 10.44 | All control cables and LV power cables upto 3.5 X 25 Sq.mm | Item 10.4400 | 5 | EA |
| 442 | 10.441 | Power cables above 3.5 X 25 Sq.mm upto 3.5 X 95 Sq.mm | Item 10.4410 | 5 | EA |
| 443 | 10.442 | Power cables above 3.5 X 95 Sq.mm upto 3.5 X 185 Sq.mm | Item 10.4420 | 5 | EA |
| 444 | 10.443 | Power cables above 3.5 X 185 Sq.mm upto 3.5 X 300 Sq.mm | Item 10.4430 | 5 | EA |
| 445 | 10.444 | 1C cable above 500 Sq mm to 1000 sq mm | Item 10.4440 | 5 | EA |
| 446 | 10.445 | SUPPLY OF COPPER LUGS SUPPLY OF COPPER EYE TYPE MOTOR TERMINAL HEAVY DUTY (CRIMPING TYPE CABLE LUG SINGLE HOLE / DOUBLE HOLE) OF DOWELLS MAKE OR EQUIVALENT CERTIFIED BY EIC. OF THE FOLLOWING SIZES. | Item 10.4450 | ||
| 447 | 10.446 | 2.5 sqmm | Item 10.4460 | 9 | EA |
| 448 | 10.447 | 4 sqmm | Item 10.4470 | 1 | EA |
| 449 | 10.448 | 6 sqmm | Item 10.4480 | 2 | EA |
| 450 | 10.449 | 10 sqmm | Item 10.4490 | 5 | EA |
| 451 | 10.45 | 16 sqmm | Item 10.4500 | 9 | EA |
| 452 | 10.451 | 25 sqmm | Item 10.4510 | 9 | EA |
| 453 | 10.452 | 35 sqmm | Item 10.4520 | 9 | EA |
| 454 | 10.453 | 50 sqmm | Item 10.4530 | 4 | EA |
| 455 | 10.454 | 70 sqmm | Item 10.4540 | 2 | EA |
| 456 | 10.455 | 120 sqmm | Item 10.4550 | 2 | EA |
| 457 | 10.456 | 150 sqmm | Item 10.4560 | 2 | EA |
| 458 | 10.457 | 185 sqmm | Item 10.4570 | 2 | EA |
| 459 | 10.458 | 240 sqmm | Item 10.4580 | 2 | EA |
| 460 | 10.459 | 300 sqmm | Item 10.4590 | 1 | EA |
| 461 | 10.46 | 630 sqmm | Item 10.4600 | 1 | EA |
| 462 | 10.461 | SUPPLY OF FLAMEPROOF DOUBLE COMPRESSION (BRASS) CABLE GLANDS WITH LOCKNUT SUPPLY OF CMRS / CCE APPROVED FLAMEPROOF DOUBLE COMPRESSION (BRASS) CABLE GLAND FOR FOLLOWING OVERALL CABLE SIZES AS PER DIRECTIONS OF ENGINEER-IN-CHARGE. | Item 10.4610 | ||
| 463 | 10.462 | up to 19 mm (0.75 inches) | Item 10.4620 | 5 | EA |
| 464 | 10.463 | above 19 mm to 25 mm (1.0 inch) | Item 10.4630 | 2 | EA |
| 465 | 10.464 | above 25 mm to 32 mm (1.25 mm) | Item 10.4640 | 2 | EA |
| 466 | 10.465 | above 32 mm to 38 mm (1.5 inches) | Item 10.4650 | 2 | EA |
| 467 | 10.466 | above 38 mm to 51 mm (2.0 inches) | Item 10.4660 | 2 | EA |
| 468 | 10.467 | above 51 mm to 64 mm (2.5 inches) | Item 10.4670 | 1 | EA |
| 469 | 10.468 | above 65 mm to 76 mm (3.0 inches) | Item 10.4680 | 1 | EA |
| 470 | 10.469 | SUPPLY OF M-SEAL LT POWER CABLE STRAIGHT THROUGH JOINT KIT | Item 10.4690 | ||
| 471 | 10.47 | SLA-1 | Item 10.4700 | 2 | EA |
| 472 | 10.471 | SLA-2 | Item 10.4710 | 5 | EA |
| 473 | 10.472 | SLA-3 | Item 10.4720 | 2 | EA |
| 474 | 10.473 | SLA-4 | Item 10.4730 | 3 | EA |
| 475 | 10.474 | SLA-5 | Item 10.4740 | 2 | EA |
| 476 | 10.475 | SLA-6 | Item 10.4750 | 1 | EA |
| 477 | 10.476 | SLA-7 | Item 10.4760 | 1 | EA |
| 478 | 10.477 | SLA-8 | Item 10.4770 | 2 | EA |
| 479 | 10.478 | SLA-9 | Item 10.4780 | 1 | EA |
| 480 | 10.479 | SLA-10 | Item 10.4790 | 2 | EA |
| 481 | 10.48 | SLA-11 | Item 10.4800 | 1 | EA |
| 482 | 10.481 | SLA-12 | Item 10.4810 | 1 | EA |
| 483 | 10.482 | SUPPLY OF COPPER LUGS Supply of copper tube terminal heavy duty (crimping type cable lug) of Dowells make or equivalent certified by EIC. of the following sizes. | Item 10.4820 | ||
| 484 | 10.483 | 2.5 sqmm | Item 10.4830 | 9 | EA |
| 485 | 10.484 | 4 sqmm | Item 10.4840 | 1 | EA |
| 486 | 10.485 | 6 sqmm | Item 10.4850 | 2 | EA |
| 487 | 10.486 | 10 sqmm | Item 10.4860 | 5 | EA |
| 488 | 10.487 | 16 sqmm | Item 10.4870 | 9 | EA |
| 489 | 10.488 | 25 sqmm | Item 10.4880 | 9 | EA |
| 490 | 10.489 | 35 sqmm | Item 10.4890 | 9 | EA |
| 491 | 10.49 | 50 sqmm | Item 10.4900 | 4 | EA |
| 492 | 10.491 | 70 sqmm | Item 10.4910 | 2 | EA |
| 493 | 10.492 | 120 sqmm | Item 10.4920 | 2 | EA |
| 494 | 10.493 | 150 sqmm | Item 10.4930 | 2 | EA |
| 495 | 10.494 | 185 sqmm | Item 10.4940 | 2 | EA |
| 496 | 10.495 | 240 sqmm | Item 10.4950 | 2 | EA |
| 497 | 10.496 | 300 sqmm | Item 10.4960 | 1 | EA |
| 498 | 10.497 | 630 sqmm | Item 10.4970 | 1 | EA |
| 499 | 10.498 | SUPPLY OF COPPER LUGS SUPPLY OF COPPER PANEL WIRING TERMINAL HEAVYY DUTY LUG (CRIMPING TYPE CABLE LUG PIN TYPE / U TYPE/ EYE TYPE/ FLAT TYPE) OF DOWELLS MAKE OR EQUIVALENT CERTIFIED BY EIC. OF THE FOLLOWING SIZES. | Item 10.4980 | ||
| 500 | 10.499 | 1.5 sq.mm | Item 10.4990 | 9 | EA |
| 501 | 10.5 | 2.5 sqmm | Item 10.5000 | 9 | EA |
| 502 | 10.501 | 4 sqmm | Item 10.5010 | 9 | EA |
| 503 | 10.502 | 6 sqmm | Item 10.5020 | 9 | EA |
AI Tender Summary
Tender Timeline
Mar 08, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 16, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 16, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender