}

Proposed Redevelopment Of Jaipal Singh Stadium For Ranchi Municipal Corporation At Ranchi, RANCHI-Jharkhand

Urban Development Department-UDD has published Proposed Redevelopment Of Jaipal Singh Stadium For Ranchi Municipal Corporation At Ranchi. Submission Date for this Tender is 23-03-2021. Stadium Tenders in RANCHI Jharkhand. Bidders can get complete Tender details and download the document.




Tender Notice

27270093
Proposed Redevelopment Of Jaipal Singh Stadium For Ranchi Municipal Corporation At Ranchi
Open Tender
Indian
Jharkhand
RANCHI
23-03-2021

Tender Details

Proposed Redevelopment Of Jaipal Singh Stadium For Ranchi Municipal Corporation At Ranchi

Key Value

Document Fees
INR 10000 /-
EMD
INR 460000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Proposed Redevelopment of “Jaipal Singh Stadium” for Ranchi Municipal Corporation at- Ranchi
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Laying and Jointing PVC Pipe. Heading BI01010001010000000000000515BI0100001112
2 1.01 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. \n2.8.1 All kinds of soil. 2.8/ D.S.R 128.27 CUM
3 2 EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I 5.1.1 915.69 CUM
4 3 Extra for earthwork in hard soil as per specification and direction of E/I. 5.1.2 812.49 CUM
5 4 FILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) 5.1.7 991.29 CUM
6 5 Providing coarse clean SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume) 5.1.10 406.52 CUM
7 6 Providing designation 75-A, BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge 5.6.1 241.23 SQM
8 7 Providing P.C.C. M-15 with nominal mix of (1:2:4) in FOUNDATION and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating striking curing taxes and royalty all complete as per building specification and direction of E/I. 5.3.2 43.47 CUM
9 8 Providing R.C.C. M-20 with nominal mix of (1:1.5:3) in FOUNDATION and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. 5.3.5 .1 52.27 CUM
10 9 Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in COLUMN with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge. 5.3.14 46.6 CUM
11 10 Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in BEAM with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge. 5.3.11 4.53 CUM
12 11 Providing R.C.C. M-20 with normal mix of 1:1.5:3 in ROOF SLAB with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. 5.3.9 (i) 3.74 CUM
13 12 Providing designation 75A brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I. 5.2.3 83 CUM
14 13 Providing 25 mm thick DAMP PROOF COURSE with cement concrete M-20 with nominal mix 1:1.5:3 with approved quality of stone ships of 20 mm to 6 mm (20mm to 10 mm : 10 mm to 6 mm stone chips 2:1) size graded and clean coarse sand of F.M. 2.5 to 3 including screening, mixing cement concrete in mixer with 5% Cico or any other approved water proofing compound and placing in position, striking, curing taxes and royalty and complete as per building specification and direction of E/I. 5.3.16.1 7.59 SQM
15 14 Providing designation 75 A BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge 5.2.11 19.46 CUM
16 15 Providing 125 mm thick REINFORCED DESIGNATION 75 A BRICK WORK in C.M. (1:4) in SUPERSTRUCTURE with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, cost of materials, racking out joints to 15 mm depth, carriage, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of Engineer Incharge . 5.2.23 49.87 SQM
17 16 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 6.15/ D.S.R. 49.87 SQM
18 17 Providing 12 mm thick water proof CEMENT PLASTER (1:6) on wall with clean coarse sand of F.M.1.5 including cost of screening, curing making grooves with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. 5.7.3 596.58 SQM.
19 18 Providing tor steel reinforcement TMT FE 500 of following dia. rods as per approved design and drawing including carriage of bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. (ONLY VALID FOR SAIL & TATA STEEL, JSPL, ELECTRO STEEL LTD. AND VIZAG STEEL)\nTOR 8 & 10 MMDIA. @ 45% of total steel qty.\n 5.5.4\n+\n5.5.5a 7.47 MT
20 19 TOR 12 -32 MM DIA. @ 55% of total steel qty. 5.5.5 (b) +(c)+ 5.5.6 9.13 MT
21 20 FLOORING WORKS\nProviding & laying 15 mm to 23 mm thick KOTAH STONE SLAB FLOORING and skirting of approved size, texture and colour over 19 mm thick base of line mortar (1:1:1) Lime putty: Surkhi: Coarse sand) laid over and jointed with grey cement slurry mixed with pigment ot match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. \n600X600 SIZE 5.6.19 162.95 SQM
22 21 Providing and laying 25 mm thick kotah stone tiles in risers of step, skirting and pillars of approved size texture and colour laid over 12 mm thick cement mortar ( 1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing taxes and royalty all complete as per building specification and direction of E/I. 5.6.20. 52.68 SQM
23 22 Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: 11.53/ D.S.R. 186.43 SQM
24 23 Providing and laying 25mm thick granite stone slab flooring of approved quality over 19mm thick base of cement mortar 1:4 (1cement :4 coarse sand) laid and jointed with white cement slurry including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, royalty and taxes all complete as per building specification and direction of E/I.\nArea of slab over 0.50 SQM 8.2.2.2/ D.S.R. 110.25 SQM
25 24 Extra for providing edge moulding to Granite stone counters, vanities etc. over above including machine polishing to edge to give high gloss finish etc. complete as per design approved by Architects / E/I. 8.3.2/ D.S.R. 129.85 RMT
26 25 Providing and laying 6 mm precast SEMI GLAZED CERAMIC TILES of approved quality in DADO over 12mm cement mortar (1:3) and jointed with white cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specification and direction of E/I with grade A coloured 20cmx15cm tiles. 5.6.23.2 51.93 SQM
27 26 Providing and laying 60 MM th. faciory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of E/I. 16.68/ D.S.R. 2302.74 SQM
28 27 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete.\n1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). 4.6.1/ D.S.R 70.11 CUM
29 28 FINISHING WORKS\nProviding and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall suface to prepare the surface even amd smooth complete. 13.80 D.S.R 37.04 SQM
30 29 Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I 5.8.18 875.17 SQM
31 30 Providing two coats of SYNTHETIC ENAMEL PAINT of approved shade and make over old WOODEN surface including cleaning the surface after removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification dirction of E/I. 5.8.33 7.38 SQM
32 31 Providing 2 coats of SYNTHETIC ENAMEL PAINT of approved shade and make over STEEL SURFACE grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I. 5.8.45 787.04 SQM
33 32 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:\nNew work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 13.47.1/ D.S.R 1691.7 SQM
34 33 Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners, etc.) 10.28/ D.S.R. 101.25 KG
35 34 LOCAL SAND , LEAD - 13 KM. 406.52 CUM
36 35 COARSE SAND , LEAD - 49 KM. 159.16 CUM
37 36 STONE CHIPS , LEAD - 22 KM. 134.8 CUM
38 37 BRICKS , LEAD- = 8 KM. 104.05 CUM
39 38 DISPOSAL OF EARTH , LEAD - 15 KM. 53.87 CUM
40 39 Dismantling plain cement or lime comncrete work including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I. 5.10.2. 5.19 CUM
41 40 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceablematerial to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.\n\n 16.83/ D.S.R. 766.43 SQM
42 41 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the \njoints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).\n 16.84/ D.S.R. 383.21 SQM
43 42 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.\n60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. 16.91/ .D.S.R. 323.6 SQM
44 43 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.\n80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. 16.91/ D.S.R. 487.73 SQM
45 44 LANDSCAPING\nSupplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). 2.2/ D.S.R. 6941.6 CUM
46 45 Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment). 2.3/ D.S.R. 3470.8 CUM
47 46 Supplying and stacking at site dump manure from local or other approved source including royalty and cariage up to 1 km. (Manure measured in stacks will be reduced 8% for payment). Screened through sieve of I.S. designation 4.75 mm. 2.4.3/ D.S.R. 3470.8 CUM
48 47 Rough dressing the trenched ground including breaking clods. 2.5/ D.S.R. 21034.2 SQM
49 48 Fine dressing the ground 2.7/ D.S.R. 21034.2 SQM
50 49 Spreading of sludge, dump manureor / and good earth in required thivkness(Cost of sludge, dump manure or / and earth to be paid seperately). 2.8/ D.S.R. 13883.2 CUM
51 50 Mixing earth and sludge or manure in proportion specified or directed. 2.9/ D.S.R. 13883.2 CUM
52 51 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.\nIn rows 5 cm apart in both direction 2.33/ D.S.R. 5258.56 SQM
53 52 Supplying & Stacking of Selection No.1/doob grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge. 2.35/ D.S.R. 15775.7 SQM
54 53 Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).\n2.10.1 In rows 5 cm apart in both directions 2.10/ D.S.R. 15775.7 SQM
55 54 Providing and stacking of Bauhinia blakeana (Kachnar) of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 7.7/ D.S.R. 45 EACH
56 55 Providing and stacking of Cassia javanica of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 7.18/ D.S.R. 20 EACH
57 56 Supply and stacking of Bottle palm/ Singapur exora red, yellow, & pink plant of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags as per direction of the officer-in-charge. 7.11/ D.S.R. 20 EACH
58 57 Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.v 7.24/ D.S.R. 45 EACH
59 58 Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 7.16/ D.S.R. 20 EACH
60 59 Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge. 8.37/ D.S.R. 15 EACH
61 60 Providing and stacking of Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pots of size 25 cm as per direction of the officer-in-charge. 8.48/ D.S.R. 10 EACH
62 61 Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-incharge.. 6.12/ D.S.R. 2000 EACH
63 62 Providing and Displaying Cyprus Golden 30 to 45 cm ht. well developed good Golden colour foliage, Conial Shape in 25 cm Earthen Pots as per direction of the officer-in-charge. 5.16/ D.S.R. 24 EACH
64 63 Providing and Displaying Golden Bottle brush Topiary well developed with fresh & healthy foliage 5 to 6 big ball 115 to 180 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge. 5.33/ D.S.R. 30 EACH
65 64 Providing and Displaying Poinsettia dwarf multi head, having 25 to 30 cm ht., with 5 to 7 branches with fully different coloured top with fresh & healthy foliage well developed in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 4.55/ D.S.R. 15 EACH
66 65 Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing, weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. 2.40.6 Open spaces (1Mali for 3.00Acre). 2.40/ D.S.R. 21034.2 SQM
67 66 Providing and stacking of Butea frondosa (Flame of Forest) of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 7.13 25 EACH
68 67 Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Used for Garden Buque) 10.1/ Bulding D.S.R. 7750 KG
69 68 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end ) \n50MM nominal bore 18.17/ 2018 D.S.R. 100 EACH
70 69 Providing & fixing White River (Stone) Pables size of 2" to 2.5" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge. 2.50/ 2018 D.S.R. 15 QTY
71 70 Providing and placing on terrace/ under ground (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (A)\nCircular tank\n 18.48/ D.S.R. 10000 LTRS
72 71 Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge. 2.56/ D.S.R. 21034.2 SQM
73 72 BOREWELL\n200/150 mm dia Deep borewell : Cost of drilling 200 mm X 165 mm X 125m deep brewell in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all all materials, tools drilling rig, Air compressure and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicle up to the site.\nFrom 0.00 M to 50.00 M below G.L 116/ PHED Page 35 50 Mtr
74 73 From 51.00 M to 125.00 M below G.L 75 Mtr
75 74 From 125.00 M to 200.00 M 75 Mtr
76 75 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.\n200mm Nominal size dia. 23.3/ D.S.R. 50 Mtr
77 76 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 23.12/ D.S.R. 2 HOUR
78 77 Providing and fixing suitable size threaded mild steel cap or spot welded\nplate to the top of bore well housing/ casing pipe, removable as per\nrequirement, all complete for borewell of:\n200 mm Dia. 23.13.3/ D.S.R. 1 EACH
79 78 Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts\nof required size complete. 23.14.3/ D.S.R. 2 EACH
80 79 Supplying 100mm dia. Submersible pump sets confirming to IS 8034 and motor cvonfirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft ant polypropylene/ norylimpeller. Motor suitable for working on 415 V+10%, 3PH, 50 HZ, AC supply with cable guard, thurst carbon/ fibre bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined no return valve shall be provided with pump. 3 m submersible copper conductor cable in single/ double run and nylon rope as required length shall be provided with each pump.\nSubmersible pump set 100mm dia (with polypropylene/ Noryl Impeller) \n2 HP PM 1-2-2/ DWS SOR 1 No
81 80 Supplying and laying /lowering of GI pipe of 50 mm dia including of required fittings solvent etc complete job as per direction of E/I \nDEMOLISHING OF EXISTING STADIUM 18.12.6/ D.S.R. 150 Mtr
82 81 Dismantling pucca brick work including stacking serviceable materialsin countable stacks within 15m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I. 5.10.1 154.18 CUM
83 82 Dismantling plain cement or lime comncrete work including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I. 5 10.2 153.67 CUM
84 83 Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I. 5.10.3 309.51 CUM
85 84 Taking down old door and window shutters including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I. 5.10.10 10 EACH
86 85 Taking down choukhats in doors including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I. 5.10.11 4 EACH
87 86 Taking down choukhats in window including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all lead, all complete as per direction of E/I. 5.10.12 6 EACH
88 87 ELECTRICAL WORKS\nWIRING POINTS, CIRCUIT WIRING, SUBMAINS, DISTRIBUTION BOARD & MCB's ETC.\nWiring for light point/fan point/exhaust fan/call bell point with 1.5 sqmm PVC insulated copper conductor cable in surface / recessed PVC conduit with moduler type switch,moduler plate,suitable size GI box etc. as required . 1.3.1 10 PT
89 88 Wiring for light/power plug with 2 x 1.5sqmm. PVC insulated, copper conductor single core cable in surface / recessed PVC conduit along with 1 no 1.5 mm PVC insulated copper wire for loop earthing as required. 1.7.1 10 M
90 89 Wiring for light/power plug with 2 x 4 sqmm. PVC insulated, copper conductor single core cable in surface / recessed PVC conduit along with 1 no 4.0 mm PVC insulated copper wire for loop earthing as required. 1.5 16 M
91 90 Wiring for submain wiring with the following size of PVC insulated, copper conductor single core cable in surface / recessed PVC conduit as required:\n2x2.5 SQMm.+1x 2.5 sq mm(for switch board ) 1.7 2 M
92 91 Wiring for light point/fan point/exhaust fan/call bell point with 1.5 sqmm PVC insulated copper conductor cable in surface / recessed PVC conduit with moduler type switch,moduler plate,suitable size GI box etc. as required . 1.3.3 20 PT
93 92 Supplying and fixing suitable size GI box with moduler plate cover in the front on surface or in recess including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps. moduler type switch, connections painting etc. as required. (For light plugs). 1.31 10 Each
94 93 Supplying and fixing suitable size GI box with moduler plate cover in the front on surface or in recess including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps. moduler type switch, connections painting etc. as required. (For power plugs). 1.32 18 Each
95 94 Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' catagory, miniature circuit breaker (10 KA) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.\nsingle pole(6 to 32A) 2.12 68 Each
96 95 6/32 amps.SPN 2.12.9 12 Each
97 96 63 amps. TPN 2.12.10 3 Each
98 97 Suppling and fixing following moduler switch / socket on the existing moduler plate & switch box including connection but excluding moduler plate etc. as reqd.\n5/6 amps switch 1.24 62 Each
99 98 5/6 amps socket outlet 1.24.4 12 Each
100 99 Suppling and fixing moduler stepped type electronic fan regulator. 1.25 10 Each
101 100 Suppling and fixing moduler type blanking plate. 1.26 22 Each
102 101 Supplying and fixing of following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts,on surface /recess, complete with tinned copper bushbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, including painting, earthing etc. as required. \n6 way (4+18)double door (TPN) 2.9 3 Each
103 102 Supplying and drawing following sizes of PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit / PVC casing capping / as required.\n2x1.5 sq mm 1.15 1050 M
104 103 3x2.5 sq mm 1.15.12 200 M
105 104 3x4 sq mm 1.15.21 300 M
106 105 S/F of following sizes of PVC conduit alongwith the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required .\n25 mm PVC coduit. 1.21 200 M
107 106 EARTHING \nS/F of Earthing electrode 80mm dia x 3mtr with backfill compound chemical 4 bag (per bag 25Kg)including earth cutting removing and installation charge. 2301 6 Set
108 107 Providing and fixing 8SWG copper wire at 0.50 m below ground level for coductor earth electrode,including soldering etc as required. 3.9 80 M
109 108 CABLE\nLaying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade. Direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.\nOf size not exceeding 25 SQMm. S.O.R-18 1400 M
110 109 Laying of additional cable in same trench. 5.14 800 M
111 110 Supply of ISI marked (IS : 7098 Pt-I) aluminium conductor XLPE Insulated armoured, served, sheathed cable 1100 volts grade.\n2C x 10sq mm S.O.R-18 +15% 2000 M
112 111 4C x16 sq mm 1905 700 M
113 112 INTERNAL LIGHTING FIXTURES\nSupply of incandescent wall/ceiling light fixtures with holders complete as per standard item with copper wiring as required for proper completion of the work.\nSupply & installation of 22/22 W LED batten lights fittings complete set. 40 NOS
114 113 Providing and fixing of Surface/ Recess LED light (18/20w) 2204 24 NOS
115 114 P/F LED 60W street Light complete Set 2216 2 NOS
116 115 Providing of bulkhead fitting with 9/10w LED bulb. 2263 24 NOS
117 116 Providing and fixing of Surface/ Recess LED light 6/7w) 2201 28 NOS
118 117 P/F LED flood light 60W complete Set 2222 3 NOS
119 118 Providing of wall fans, 400mm dia sweep 2106 2 NOS
120 119 ERECTION OF LIGHTING FIXTURES, FANS & EXTERNAL LIGHTING\nINTERNAL LIGHTING FIXTURES\nInstallation, testing and commissioning of prewired, fluorescent fittings, of all types (1 x 28 watt.) complete with all accessories and tubes etc. directly on ceiling / wall, including connections with 1.5 SQMm. PVC insulated, copper conductor, single core cable etc as required 1.41 40 Each
121 120 Erection of ceiling fittings 1.35. 20 Each
122 121 S/F ceiling rose 1.33 60 Each
123 122 Erection of metallic pole of 3.5m length in cement concrete 1:3:6 (1 cement : coarse sand : 6 graded stone aggregate 40mm nominal size) foundation with cement concrete collar of size 0.4mdiax 0.5m hight to accommodate the looping type cable end box including excavation and refilling etc. as required. 8.8 50 Each
124 123 Erection of ceiling fittings 1.35 36 Each
125 124 NONSCHEDULED ITEMS - PART - II\nProviding and fixing of best quality POP-up 1.5" dia. Nozzle Sprinkler of standard make in garden including all fittings, complete job. 100 EACH
126 125 Providing and fixing UPVC PIPE (6.0kg pressure) including all plain & brass threaded fittings. This includes joining of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL/ SUPREME)\n50mm dia 1800 METER
127 126 Supplying, Installing, Testing and Commissioning of 5.0 HP Motor with Panel icluding all complete. (Approved Brand - Kiloskar/ CRI) 1 EACH
128 127 Providing Filter and byepass assembly for above motor pump as per required. 1 EACH
129 128 Providing, Supplying & Fixing of Green Wall With M.S. Frame Work and Heavy Duty P.V.C. Bucket Including Plant and Irrigation System all Complete Job. 5.36 SQM
130 129 S/F Aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder finish compatible for all post top range.(3.5mtr make-Havells PE 7308) 50 Each
131 130 Supply and installation of CORAL (opal)-IP65 post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution spun alluminium landscape liminaire with high power LED as light source (RUBY PT35W LED 757PSYMTOPC 9405 Havells) 50 Each
132 131 S/F of high quality 24w LED strip (Rope)lighting with driver as per approved design.(Approved brand- Havells/wipro) 15 Each
133 132 Supplying and fitting of standared make starter pannel board with arrangement of all necessory protection ,including all taxes , royalty etc all complete job as per direction of E/I 1 No
134 133 Supplying ,fitting & fixing & connecting 3 core 4 sqmm flat copper submerssible cable of Finolex / Hevels make including all taxes ,royalty etc all complete job as per direction of E/I 150 Mtr
135 134 OPEN AIR GYM\nSupplying and fixing of CHEST PRESS – (PGOFT 09) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 2 EACH
136 135 Supplying and fixing of AERO RIDER – (PGOFT 07) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
137 136 Supplying and fixing of LEG EXTENSION – (PGOFT 05) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
138 137 Supplying and fixing of FOREARM TWIRL – (PGOFT 02) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
139 138 Supplying and fixing of SKY WALKER – (PGOFT 38) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
140 139 Supplying and fixing of ABS BOARD – (PGOFT 03) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 2 EACH
141 140 Supplying and fixing of HIP TWISTER DOUBLE CIRCULAR – (PGOFT 31) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
142 141 Supplying and fixing of LEG PRESS DOUBLE STANDARD – (PGOFT 32) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
143 142 Supplying and fixing of PUSH UP BAR – (PGOFT 43) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
144 143 Supplying and fixing of CIRCULAR PULL UP STATION – (PGOFT 44) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
145 144 Supplying and fixing of HAND ROWER – (PGOFT 45) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
146 145 Supplying and fixing of BACK EXTENSION – (PGOFT 48) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
147 146 Supplying and fixing of SURF BOARD – (PGOFT 51) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
148 147 Supplying and fixing of SEATED TWISTER – (PGOFT 50) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
149 148 Supplying and fixing of PULL UP STATION – (PGOFT 40) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
150 149 Supplying and fixing of ALUMINIUM DUST-BIN – PGGD 12 (3 ft.) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 5 EACH
151 150 Supplying and fixing of UMBRELLA TABLE – (PGGD 02) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 3 EACH
152 151 Supplying and fixing of VIP BENCH (PGGD 46) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 35 EACH
153 152 Supplying and fixing of SUNNY MAPS (MULTI ACTIVITY PLAY SYSTEM) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 1 EACH
154 153 Supplying and fixing of SHOULDER EXCERCISE (PGOFT11) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.)SHOULDER EXERCISE 2 EACH
155 154 Supplying and fixing of GARDEN SWING (PGGD 27) including all fittings and fixing with concrete on ground as per required foundation, including all taxes all complete job including one year warranty. All Earthwork and Concrete work will be paid separately. (Approved Brand - ARIHANT INDUSTRIAL CORP. LTD.) 3 EACH
156 155 STATUE & TOPIARY\nSupplying and fixing of JAIPAL SINGH MUNDA REALISTIC LIFE SIZE FIBER RESIN CAST 3D (Size- 6 ft. height respective) including all fittings and fixing, including all taxes all complete job. 1 EACH
157 156 Supplying and fixing of JAIPAL SINGH MUNDA REALISTIC LIFE SIZE ACTION FIBER RESIN CAST 3D (Size- 6 ft. height respective of action) including all fittings and fixing, including all taxes all complete job. 1 EACH
158 157 Peacock Topiary Art (Creeper Plant) (8 ft. Height X 3 ft. Body X 8 ft. Wings Spread) 1 EACH
159 158 Providing and preparing of BASKETBALL COURT (32MX19M) TENNIS COURT (36.6MX18.3M) with following items, works to be done by approved agency, like -Frogg Sports Infra Pvt Ltd., Sharma & Company.\nAsphalt Base\nProviding and laying of asphalt base consisting of a 8” inch pavement as under : \n• Excavation to a depth between 3 to 6 inches or as required to remove all weeds and grass from its roots, create a slope of 1” in every 10’ in the sub-base on the shorter axis. Extreme care would need to be taken to ensure a correct slope of 1” in every 10’.\n• Compaction of the sub-base will be by 8 – 10 ton roller.\n• Carry out anti termite and weedicide on the total area by injecting the chemicals and also spraying.\n• Lay a 1st layer of 3” compacted water bound macadam. WBM to be densely compacted by keying and interlocking the stones to ensure no settlement takes place.\n• Lay a 2nd layer of water bound macadam (3 inches thick) same as above except the stone size will be smaller.\n• Lay a 30mm compacted thick Hot Mix asphalt BM course. \n• Lay a 20mm compacted thick Hot Mix A.C. course \n• Seal Coat with stone dust. 1278 SQM.
160 159 Edge Wall \nProviding & laying a 150mm high retaining wall/ toe wall clay brick work in cement mortar 1:6 includiding excavation, PCC along edges of the court, keeping the top level straight as/ dwg. & detail or as directed by project incahrge. 212 RMT
161 160 Drain \nProviding & laying an 0.23m wide open saucer drain (in M-25) at the lower end and the water of drain connecting through sleeves to the nearest catch basin as/drawing & detail. The cost includes providing and laying base PCC and cement mortar as directed by project incahrge. 68 RMT
162 161 Synthetic Acrylic (9 Layers) \nProviding & Fixing 2 layers of resurfacer, 5 layers of cushion, 2 layers of color, court markings, cushioned system. 1278 SQM
163 162 Chain Link Fencing for Basketball court \nSupply & installation of 10 ft high 12 gauge 2 " dia pipes of mild steel spaced 10 ft apart on all four sides of the court with one gate including 2 or more coats of emultion paint of approved shade over primer coat where ever required. The top and bottom of the chain link 1 ½” dia pipes and the chain link will of 3 mm thick GI wire spaced 2" apart. The cost include base grouting of chain link post in PCC as directed by project incharge. 306 SQM
164 163 Basketball Accessories \nSet of 3.2m Basketball Poles with 8” round pipes, 5.25mm, and 25mm Acrylic sheet, complete with rings and net ,\nincluding installation. 1 Set
165 164 Lighting for Basketball \nSupply & installation of 4 MS poles 9m high, placed on the sides. includes following: \n1. 12 LED 200W fixtures on the four poles (3 on each pole)\n2. One double door weather proof distribution board with MS sheet\n3. Four pole with MCB’s\n4. Earthing Electrode\n5. Full wiring from distribution board to poles and to the fixtures complete.\nThe cost of the cable from the main power source to the Distribution board at the tennis court will be in client's scope of work 1 Set
166 165 Chain Link Fencing for Tennis Court \nSupply & installation of 10 ft high 12 gauge 2 " dia pipes of mild steel spaced 10 ft apart on\nall four sides of the court with one gate including 2 or more coats of emultion paint of approved shade over primer coat where ever required. The top and bottom of the chain link 1 ½” dia pipes and the chain link will of 3 mm thick GI wire spaced 2" apart. The cost include base grouting of chain link post in PCC as directed by project incharge. 335 SQM
167 166 Tennis Accessories \nDavis Cup standard tennis net post and export quality tournament nets. 1 Set
168 167 Lighting \nSupply & installation of 4 MS poles 9m high, placed on the sides. includes following: \n1. 16 LED 200W fixtures on the four poles (4 on each pole)\n2. One double door weather proof distribution board with MS sheet\n3. Four pole with MCB’s\n4. Earthing Electrode\n5. Full wiring from distribution board to poles and to the fixtures complete.\nThe cost of the cable from the main power source to the Distribution board at the tennis court will be in client's scope of work 1 Set
169 168 Providing and fixing 0.71 mm th. Aluminum sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) over existing roof including all ridges and valleys as required with avoiding scratches during transportation and should be supplied in single length as required or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Measurement should be done area of roof only. (Approved Brand - Hindalco/ Equivalent) 771.62 SQM
170 169 Providing, installing, testing and commissioning of Fountain and Waterfall including all accessories and fittings and 3 years annual maintenance contract with following specifications and items -\nProviding and fixing of Geyser/foam Nozzle 1" dia., 22 Nos, Make - EGTPL\nProviding and fixing of floor inlet make ABS, 12 Nos, GADS\n Providing and fixing of Upvc diffuser 2"dia., 5 Nos, GADS\nProviding and fixing of Self Priming Recirculating high capacity\npump of CI Body and Steel Shaft & Impeller ,1 HP 1 NOS Make -KILOSKER/KSB\nProviding and fixing of Self Priming Recirculating high capacity pump of CI Body and Steel Shaft & Empeller,7.5 HP, 3 NOS, Make -KILOSKER/KSB.\nProviding and fixing of SS316 underwater LED Light 18 W RGB 67 Nos, Make - EGTPL\nProviding and fixing of SS light Stand 2 way, 22 NOS Make - EGTPL\nProviding and fixing of SS light Stand custom made 23 NOS, Make - EGTPL\nProviding and fixing of Junction Box 12 NOS, Make - EGTPL\nProviding and fixing of control module 12v 30/A colour changer 4 NOS, Make - EGTPL\nProviding and fixing of transformer 12v DC/30amp 7 NOS, Make - EGTPL\nProviding and fixing of Suction Vacuum point, 1 NOS, Make - EGTPL\nProviding and fixing of Dosing unit 1 Nos, Make - GADS\nBobbin wound 450 mm diameter media filter fitted with\npressure gauge panel, manual air bleeder, water drain &\nemptying plug and fitted with collector arms and diffusers\nmade from unplasticized PVC & PP includes multiport valve.\nFiltration Flow Velocity 50/hr/m², Max Flow Rate 7.9 m³/h,\nMaximum Working Pressure 2.5 Kg/Cm². 1 NOS Make - GADS\nSand media 100 Kg\n10 Kg/Cm² uPVC Pipes and Fittings (Bend/Tee/Reducer\nBush/End Caps/Solvent) including all required accessories (Pressure Gauge/Bypass Assembly), pump & backwash headers,\nvalves, butterfly valves, non return valves, air release valves,\npressure release valve, etc.,\n1 lot, Make - SUPREME/FINOLEX/NETAFIM/UNIX\nWires /cables conduit ,bend and fittings as required, 1 lot, Make - POLYCAB/CONA/EVEREST\nControl panel body with Amp and voltmeter , MCB's , push\nbuttons ,Isolator , indicators etc 1No. Make - EGTPL\n3 phase panel incomer with MCB's and neutral link 1 of standard make .\nStater for 1 HP submersible pump, 1 Nos, as per approved make\nstater for 7.5 HP submersible pump 3 NOS, as per approved make\nVacuum head 1 NOS Make - GADS\n3 Hose Pipe (Floating Hose) 1 NOS, Make - GADS\nDeep net bag 1 NOS, Make - GADS\nTelescopic Handle 1 NOS, Make - GADS\n18" curved wall brush 1 Nos GADS 1 Complete Job
171 170 Supply and installation of living wall/ Green wall system inclusive of LW panel ,selected acclimatized plants, selected precise drip irrigation system, cultured growth media, aluminum mounting strips and accessories, complete in all respect. 13.78 SQM
172 171 SOLAR LED LIGHTNING IN CAMPUS\nProviding and fixing 12V, 45 WP with 12V - 40 AH battery (24 month warranty), 12 LED luminary (Avni make, 24 month warranty), 2.5 SQMm 2 core cablle for self mounted fixing 15'-0" ht. m.s. pole fixed on ground with concrete as per required including all hardware and accessories complete. 20 EACH
173 172 Proving and finishing wall with art work or Painting with weatherproof plastic emulsion pants for Sohrai, Kohbar, Saura, Paithkar, Jadupetiya, Kalighat and Madhubani artwork, Etc. as per deign and required including all labours and materials complete job. Approved Artist - Jayshree Devi. 100.33 SQM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail