Bridge And Roof Company I Limited has published Work Include Equipment Erection , Fabrication And Erection Of Aboveground/Underground Piping , Fabrication And Erection Of Structural Works , Ndt Works , Painting Works Etc . Mechanical Works In Connection With Combined Station Works Of Mechanical ,. Submission Date for this Tender is 30-03-2021. Pipe Laying Tenders in IOCL at Dumad in Gujarat State Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Mar-2021 | Extension of Due date I | Date | 30-03-2021 |
| Name of Work: Mechanical Works (Equipment Erection, Fabrication & Erection of aboveground/underground piping, Fabrication & Erection of Structural Works, NDT Works, Painting Works etc.) in connection with “Combined Station Works of Mechanical, Civil, Electrical & Instrumentation Works and other facilities under Kandla Gorakhpur Liquefied Petroleum Gas (LPG) Pipeline Project of Indian Oil Corporation Limited at Dumad in Gujarat State | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CSW-Dumad-Services-ITC | Item 00010 | ||
| 2 | 2 | C Mechanical | Item 10.C | ||
| 3 | 3 | "MLPU Installation(Motor Driven): Taking delivery of mainline pumping units having electrical motor, horizontal centrifugal pump (to be mounted on a common base plate ), Local control panel, VFD and other auxiliaries and accessories, grouting materials etc from designated storage location within the Pump Station, shifting and placing the equipments in the pre-constructed foundation, carrying out levelling and grouting, aligning the equipment, assembling together of all sub-assemblies, auxiliaries, mountings, fittings, interconnecting piping etc., providing assistance for carrying out trial run of motor on no load, coupling the electrical motor with the pump, making final alignment, checking and testing of the complete pumping unit and completing the work in all respects in accordance with the drawings, manufacture r's installation instructions, technical specifications and as per the instruction of the Site Engineer / EIC. Note: 1. The auxiliaries and mountings shall include but not limited to pipe works etc. 2. Electrical & Instrumentation connections are not included in this item. 3. Weight of equipment is indicative only, Payment shall be done based on actual weight of equipment. 4. Grouting material shall be supplied by owner. " | Item 10.C.10 | ||
| 4 | 4 | Mainline Pumping Units Installation | Item 10.C.20 | 100 | TO |
| 5 | 5 | Taking delivery and transportation of equipments from designated Centralized warehouse location within the state (Details of warehouse given in SCC) and installation of Insulating Couplings of the following sizes and pressure class, at elevations specified in the drawing, checking resistance value by meggar test before and after erection levelling, aligning and checking, making welded connecti ons to the piping, coating & wrapping and completing the work in all respects in accordance with the relevant drawings, manufacturer's installation instructions, specifications and instructions of Site Engineer / EIC. | Item 10.C.30 | ||
| 6 | 6 | 8" x 300# Insulating Coupling | Item 10.C.40 | 2 | EA |
| 7 | 7 | Above Ground Equipments Installation: | Item 10.C.50 | ||
| 8 | 8 | Single Basket Type Strainer - 16" x 600# | Item 10.C.60 | 7 | TO |
| 9 | 9 | Single Basket Type Strainer - 8" x 300# | Item 10.C.70 | 2 | TO |
| 10 | 10 | "Above ground process piping: Taking delivery & transporting of pipes from designated stock pile location /Designated godown both from outside & inside station pr emises. Taking delivery of pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within station premises, transporting the same to site, fabrication and erection of above ground piping including cutting, edge preparation, bending, threading, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees,conc entric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipment nozzles, valves, vessels, in li ne instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by water after cleaning by compress ed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final cleaning-up and dispoal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than those specifically under taken by the owner in this contract) and completing the work in all respects in accordance w ith the drawings, specifications and instructions of Site Engineer / EIC. Thickness and Grade mentioned in the item are for reference only and may vary. Payment shall be based on OD" | Item 10.C.80 | ||
| 11 | 11 | 20" OD x 0.375"/0.438"WT APL 5L | Item 10.C.90 | 50 | M |
| 12 | 12 | " 18"" OD x 0.375""/0.438""WT APL 5L" | Item 10.C.100 | 200 | M |
| 13 | 13 | " 16"" OD x 0.375""/0.438""WT APL 5L " | Item 10.C.110 | 250 | M |
| 14 | 14 | " 12.75"" OD x 0.375"" WT APL 5L " | Item 10.C.120 | 200 | M |
| 15 | 15 | " 10.75"" OD x 0.365"" APL 5L " | Item 10.C.130 | 50 | M |
| 16 | 16 | " 8.625"" OD x 0.322"" / 0.375"" / 0.438"" WT API 5L /ASTM A106/A333" | Item 10.C.140 | 250 | M |
| 17 | 17 | " 6.625"" OD x 0.280"" ASTM A 106 Pipe/A333" | Item 10.C.150 | 70 | M |
| 18 | 18 | " 4.5"" OD x 0.237""WT ASTM A 106 Gr B/A333" | Item 10.C.160 | 70 | M |
| 19 | 19 | " 3.5"" OD x 0.216""WT ASTM A 106 Gr B /A333 " | Item 10.C.170 | 120 | M |
| 20 | 20 | " 2.375"" OD x 0.218""WT ASTM A 106 Gr B /A333 " | Item 10.C.180 | 120 | M |
| 21 | 21 | " 1.315"" OD x 0.179""WT ASTM A 106 Gr B /A333" | Item 10.C.190 | 120 | M |
| 22 | 22 | "Above ground internal epoxy coated pipe for Fire Water Services: (with internal epoxy coating for repair at welding joints ) Taking delivery of internal epoxy coated pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within station premises, transporting the same to site, fabrication and erection of above ground piping including cut ting, edge preparation, bending, threading, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipme nt nozzles, valves, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by water after cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final cleaning-up and disposal of wastes and surpluses including providing all inputs such as labour, material, equipments and cons umables necessary to perform the work (other than those specifically under taken by the owner in this contract).The scope shall also include cleaning of internal surface of pipes conforming to SSPC SP-10 at all location where coating has been distroyed due to weld ing and repairing the internal surface by application of 2-pack cold cured Isophthalic polyster acrylic co-polymer glass flake fille d /Liquid epoxy / Equivalent with coating of thickness 700-1000 Microns . The locations where internal coating repair is expected w ould be at pipe end, Flanges ,pipe fittings ,valve location so that the internal of pipe surface is not directly exposed to water an d completing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC." | Item 10.C.200 | ||
| 23 | 23 | 18" ODx 0.375" WT IS3589 FE410 Pipe | Item 10.C.210 | 900 | M |
| 24 | 24 | 16" ODx 0.375" WT IS3589 FE410 Pipe | Item 10.C.220 | 10 | M |
| 25 | 25 | 6.625" ODx 0.250" WT IS3589 FE410 Pipe | Item 10.C.230 | 100 | M |
| 26 | 26 | 4.5" ODx 0.237" WT ASTM A 106 Gr B Pipe FW | Item 10.C.240 | 100 | M |
| 27 | 27 | "Under ground piping for Process piping (with PU/3LPE Coating): Taking delivery of bare Pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location with in station premises transporting the same to site, fabrication and erection of underground piping including cutting, edge preparation, bending, threading, lining up and welding, excavating, trenching in all kind of soil to specific depths as indicated in drawings and installing pipes and all types of pipe fittings like flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, drain funnels, vent pipe and tapping for instrument such as pessure gauges, thermal relief valves, thermowells etc., underground at elevations indicated in the drawing connecting with equipment nozzles, valves, vessels, in-line instruments etc.,Cleaning expos ed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flanges,equipment and valves etc. by sand blasting or with power wire brush (wherever sand blast cleaning is not possible) free of dust, grease, mill scales etc. and applying single layer polyurethane coating(PU) using 100% solvent free elastomeric plyurethane/ liquid epoxy, with approved materials,Equipment etc, holiday detection of the coating, cleaning of coated pipes by water flushing after cleaning by compresed air,hydrostatic testing of each section to the spec ified pressure, draining the water, tie-in, back filling, restoration of site final cleaning up and disposal of water and surpluses, providing all inputs such as labour, materials equipment and consumable necessary to perform the work (other than those specificall y undertaken to be supplied by the owner under the contract) and completing the work in all respects in accordance with the drawing s, specifications and instructions of the Site Engineer / EIC. In case of 3LPE coated pipes, weld joints shall be PU coated.Thicknes s and Grade mentioned in the item are for reference only and may vary. Payment shall be based on OD Note:- Charges for applying single layer polyurethane coating(PU) using 100% solvent free elastomeric plyurethane/ liquid epoxy for exposed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flanges,equipment and valves etc shall be paid under separate SOR Item." | Item 10.C.250 | ||
| 28 | 28 | 18" OD x 0.375"/0.438"WT APL 5L -U/G | Item 10.C.260 | 50 | M |
| 29 | 29 | " 16"" OD x 0.375""/0.438""WT APL 5L -U/G" | Item 10.C.270 | 150 | M |
| 30 | 30 | " 12.75"" OD x 0.375"" WT APL 5L -U/G" | Item 10.C.280 | 120 | M |
| 31 | 31 | " 8.625"" OD x 0.322"" / 0.375"" / 0.438"" WT API 5L /ASTM A106/A333 -U/G" | Item 10.C.290 | 25 | M |
| 32 | 32 | " 3.5"" OD x 0.216""WT ASTM A 106 Gr B/A333 -U/G " | Item 10.C.300 | 100 | M |
| 33 | 33 | " 2.375"" OD x 0.218""WT ASTM A 106 Gr B/A333 -U/G " | Item 10.C.310 | 100 | M |
| 34 | 34 | " 1.315"" OD x 0.179""WT ASTM A 106 Gr B/A333 -U/G" | Item 10.C.320 | 100 | M |
| 35 | 35 | "Under ground piping for Fire Water Services:(with internal epoxy coating for repair at welding joints, flanges and fittings) Taking delivery of bare Pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location with in station premises / Centralized warehouse (as applicable) transporting the same to site, fabrication and erection of underground piping including cutting, edge preparation, bending, threading, lining up and welding, excavating, trenching in all kind of soil to s pecific depths as indicated in drawings and installing pipes and all types of pipe fittings like flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, drain funnels, vent pipe and tapping for instrument such as pressure gauges, thermal relief valves, thermowells etc., underground at elevations indicated in the drawing connecting with equipme nt nozzles, valves, vessels, in-line instruments etc., cleaning of coated pipes by water flushing after cleaning by compressed air h ydrostatic testing of each section to the specified pressure, draining the water, tie-in, back filling, restoration of site final cl eaning up and disposal of water and surpluses, providing all inputs such as labour, materials equipment and consumable necessary to perform the work (other than those specifically undertaken to be supplied by the owner under the contract) .The scope shall also include cleaning of internal surface of pipes conforming to SSPC SP-10 of Flanges, fiitings and at all location where coating has been destroyed due to welding and repairing the internal surface by application of 2-pack cold cured Isophthalic polyster acrylic co-polymer glass flake filled /Liquid epoxy / Equivalent with coating of thickness as per specifications. The locations where internal coating repair is expected would be at pipe end, Flanges, pipe fittings ,valve location so that the internal of pipe surface is not directly exposed to water and completing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. Note:- 1) Charges for applying polyurethane coating(PU) for exposed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flanges, equipment and valves etc shall be paid under separate SOR Item. 2) Charges for supply of pipe with internal coating shall be paid under separate SOR items" | Item 10.C.330 | ||
| 36 | 36 | 18" ODx 0.375" WT IS3589 FE410 Pipe -U/G | Item 10.C.340 | 200 | M |
| 37 | 37 | 16" ODx 0.375" WT IS3589 FE410 Pipe -U/G | Item 10.C.350 | 10 | M |
| 38 | 38 | "Above ground piping for Fuel line / Air line: Taking delivery of pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within s tation premises / Centralized warehouse (as applicable) , transporting the same to site, fabrication and erection of above ground pi ping including cutting, edge preparation, bending, threading, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees, concentric reducers, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipment nozzles , valves, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by water af ter cleaning by compressed air including air cleaning prior to installation of valve by card board/ Tin blasting method, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final cleaning-up and disposal of wastes and surplus es including providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than those specifically under taken by the owner in this contract).completing the work in all respects in accordance with the drawings, spec ifications and instructions of Site Engineer / EIC." | Item 10.C.360 | ||
| 39 | 39 | 3.5" ODx 0.216" WT ASTM A 106 Gr B Pipe F/A | Item 10.C.370 | 100 | M |
| 40 | 40 | 2.375" ODx 0.218" WT ASTM A 106 Gr B Pipe F/A | Item 10.C.380 | 100 | M |
| 41 | 41 | 1.315" ODx 0.179" WT ASTM A 106 Gr B Pipe F/A | Item 10.C.390 | 100 | M |
| 42 | 42 | "Under ground piping for Fuel / Air piping: Taking delivery of pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fastenersfrom designated location within station premises / Centralized warehouse (as applicable), fabrication and erection of underground piping including cutting, edge prepar ation, bending, threading, lining up and welding, excavating, trenching in all kind of soil to specific depths as indicated in drawi ngs and installing pipes and all types of pipe fittings like flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, drain funnels, vent pipe and tapping for instrument such as pessure gauges, thermal relief valves, thermowells etc., underground at elevations indicated in the drawing connecting with equipment nozzles, valves, vessels, in-line instruments etc., cleaning the material surface by sandblast cleaning, coating and wrapping the pipes/pipe fittings with coaltar base tape coating material (in cluding the supply of coating tape, precoat material etc.), holiday detection of the coating, cleaning of coated pipes by water flus hing after cleaning by compresed air prior to installation of valve, cleaning by card board/ Tin blasting method, hydrostatic testin g of each section to the specified pressure, draining the water, tie-in, back filling, restoration of site final cleaning up and dis posal of water and surpluses, providing all inputs such as labour, materials equipment and consumable necessary to perform the work (other than those specifically undertaken to be supplied by the owner under the contract) and completing the work in all respects in accordance with the drawings, specifications and instructions of the Site Engineer / EIC. " | Item 10.C.400 | ||
| 43 | 43 | 3.5" ODx 0.237"WT ASTM A 106 Gr B F/A/ U/G | Item 10.C.410 | 50 | M |
| 44 | 44 | 2.375" ODx 0.237"WT ASTM A 106 Gr B F/A/ U/G | Item 10.C.420 | 50 | M |
| 45 | 45 | 1.315" ODx 0.237"WT ASTM A 106 Gr B F/A/ U/G | Item 10.C.430 | 50 | M |
| 46 | 46 | "Valves: Taking delivery of valves of all types and pressure ratingfrom designated location within station premises / Centralized wa rehouse (as applicable), erecting above ground on preconstructed foundations or underground including earth work in excavation and f illing for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC." | Item 10.C.440 | ||
| 47 | 47 | 1 x ANSI 800# HOV W/W API 602 Gate Valve | Item 10.C.450 | 10 | EA |
| 48 | 48 | "Valves: Taking delivery of valves of all types and pressure rating from designated location within station premises / Centralized w arehouse (as applicable), transporting the same to site, erecting above ground on preconstructed foundations or underground includin g earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of abov e ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawin gs, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC." | Item 10.C.460 | ||
| 49 | 49 | 2" x ANSI 900# HOV F/F API 6D Ball Valve | Item 10.C.470 | 1 | EA |
| 50 | 50 | "Valves: Taking delivery of valves of all types and pressure rating from designated location within station premises / Centralized w arehouse (as applicable), erecting above ground on preconstructed foundations or underground including earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (other than those specifically undertak en to be supplied by the owner) and completing the work in all respects in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC." | Item 10.C.480 | ||
| 51 | 51 | 18" x ANSI 600# MOV F/F API 6D Ball Valve | Item 10.C.490 | 7 | EA |
| 52 | 52 | 16" x ANSI 600# MOV F/F API 6D Ball Valve | Item 10.C.500 | 15 | EA |
| 53 | 53 | 10" x ANSI 600# MOV F/F API 6D Ball Valve | Item 10.C.510 | 1 | EA |
| 54 | 54 | 4" x ANSI 600# HOV F/F API 6D Ball Valve | Item 10.C.520 | 2 | EA |
| 55 | 55 | 3" x ANSI 600# HOV F/F API 6D Ball Valve | Item 10.C.530 | 1 | EA |
| 56 | 56 | 12" x ANSI 600# MOV F/F API 6D Ball Valve | Item 10.C.540 | 15 | EA |
| 57 | 57 | 8" x ANSI 600# MOV F/F API 6D Ball Valve | Item 10.C.550 | 12 | EA |
| 58 | 58 | 2" x ANSI 600# HOV F/F API 6D Ball Valve | Item 10.C.560 | 25 | EA |
| 59 | 59 | 2" x ANSI 600# HOV W/W API 6D Ball / Ball Valve | Item 10.C.570 | 5 | EA |
| 60 | 60 | 1" x ANSI 600# HOV F/F BS 5351 BALL VALVE | Item 10.C.580 | 30 | EA |
| 61 | 61 | "Valves: Taking delivery of valves of all types and pressure rating from designated location within station premises / Centralized w arehouse (as applicable), transporting the same to site, erecting above ground on preconstructed foundations or underground includin g earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of abov e ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC." | Item 10.C.590 | ||
| 62 | 62 | 3" x ANSI 600# HOV F/F API 6D Ball Valve | Item 10.C.600 | 1 | EA |
| 63 | 63 | 8" x ANSI 300# MOV F/F API 6D Ball Valve/ROV | Item 10.C.610 | 8 | EA |
| 64 | 64 | 2"/3" x ANSI 300# HOV F/F API 6D Ball Valve | Item 10.C.620 | 4 | EA |
| 65 | 65 | 2"/3" x ANSI 300# HOV W/W API 6D Ball Valve | Item 10.C.630 | 4 | EA |
| 66 | 66 | "Valves: Taking delivery of valves of all types and pressure ratingfrom designated location within station premises / Centralized wa rehouse (as applicable), transporting the same to site, erecting above ground on preconstructed foundations or underground including earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC." | Item 10.C.640 | ||
| 67 | 67 | 18" x 600# API 6D SWING CHECK VALVE F/F, A/G | Item 10.C.650 | 1 | EA |
| 68 | 68 | 16" x 600# API 6D SWING CHECK VALVE F/F, A/G | Item 10.C.660 | 3 | EA |
| 69 | 69 | 12"x ANSI 600# F/F API 6D Swing Check Valve -A/G | Item 10.C.670 | 5 | EA |
| 70 | 70 | 8"x ANSI 600# F/F API 6D Swing Check Valve | Item 10.C.680 | 1 | EA |
| 71 | 71 | "Valves: Taking delivery of valves of all types and pressure ratingfrom designated location within station premises / Centralized wa rehouse (as applicable), transporting the same to site, erecting above ground on preconstructed foundations or underground including earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC." | Item 10.C.690 | ||
| 72 | 72 | 16" 600# Control Valve F/F | Item 10.C.700 | 1 | EA |
| 73 | 73 | 8" 300# Control Valve F/F | Item 10.C.710 | 1 | EA |
| 74 | 74 | Valves: Taking delivery of valves of all types and pressure rating from designated location within station premises / Centralized wa rehouse (as applicable), transporting the same to site, erecting above ground on preconstructed foundations or underground including earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawing s, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC. | Item 10.C.720 | ||
| 75 | 75 | 18" ANSI 900 /600# # F/F BS-1873 GLOBE Valve | Item 10.C.730 | 1 | EA |
| 76 | 76 | 16" ANSI 900 /600# # F/F BS-1873 GLOBE Valve | Item 10.C.740 | 1 | EA |
| 77 | 77 | 4"x ANSI 600# F/F BS-1873/BS EN ISO 15761 GLOBE Valve | Item 10.C.750 | 2 | EA |
| 78 | 78 | 2"x ANSI 600# F/F BS-1873 GLOBE Valve | Item 10.C.760 | 15 | EA |
| 79 | 79 | 8"x ANSI 300# F/F BS-1873/BS EN ISO 15761 GLOBE Valve | Item 10.C.770 | 1 | EA |
| 80 | 80 | 2"x ANSI 300# F/F BS-1873/BS EN ISO 15761 GLOBE Valve | Item 10.C.780 | 1 | EA |
| 81 | 81 | 1"x ANSI 800# W/W BS-1873/BS EN ISO 15761 GLOBE Valve | Item 10.C.790 | 30 | EA |
| 82 | 82 | "Valves: Taking delivery of valves of all types and pressure ratingfrom designated location within station premises / Centralized wa rehouse (as applicable), transporting the same to site, erecting above ground on preconstructed foundations or underground including earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (other th an those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC." | Item 10.C.800 | ||
| 83 | 83 | 1" x 1" Thermal Relief Valve F/F ANSI 600# x 300 | Item 10.C.810 | 28 | EA |
| 84 | 84 | 1" x 1" Thermal Relief Valve F/F ANSI 300# x 300 | Item 10.C.820 | 10 | EA |
| 85 | 85 | "Installation of Valves(for Fire water Lines-Tanks & Piping) : Taking delivery of valves of all types and pressure rating from thedesignated location within station premises, transporting the sam e tosite, erecting above ground on preconstructed foundations or undergroundincluding earth work in excavation and filling for under ground valvesat elevations specified in the drawings, priming and painting of aboveground valves, flood coating and wrapping of und er ground portions (ifapplicable) including all inputs, labour, material and consumable (otherthan those specifically undertaken to be supplied by the owner) andcompleting the work in all respects in accordance with the drawings,manufacturer's installation instruc tions and specifications andinstructions of the Site Engineer /EIC. Note:The cost of construction of Valve foundations shall be measured &paid separately under respective civil items. "" " | Item 10.C.830 | ||
| 86 | 86 | 16"x ANSI 150 # HOV F/F API 600 Gate Valve FW | Item 10.C.840 | 15 | EA |
| 87 | 87 | 14"x ANSI 150 # HOV F/F API 600 Gate Valve FW | Item 10.C.850 | 1 | EA |
| 88 | 88 | 12"x ANSI 150 # HOV F/F API 600 Gate Valve FW | Item 10.C.860 | 2 | EA |
| 89 | 89 | 10"x ANSI 150 # HOV F/F API 600 Gate Valve FW | Item 10.C.870 | 2 | EA |
| 90 | 90 | 8"x ANSI 150 # HOV F/F API 600 Gate Valve FW | Item 10.C.880 | 2 | EA |
| 91 | 91 | 6"x ANSI 150 # HOV F/F API 600 Gate Valve FW | Item 10.C.890 | 2 | EA |
| 92 | 92 | 4"x ANSI 150 # HOV F/F API 600 Gate Valve FW | Item 10.C.900 | 30 | EA |
| 93 | 93 | 2"x ANSI 150 # HOV F/F API 600 Gate Valve FW | Item 10.C.910 | 2 | EA |
| 94 | 94 | HYDRANTS & MONITOR | Item 10.C.920 | ||
| 95 | 95 | High Volume Long Range Foam Monitor 750 GPM capacity stand post type with inlet flange of 4" X 150# HVLR | Item 10.C.930 | 12 | EA |
| 96 | 96 | Stand Post Type double way fire hydrant fitted with 2 Nos of single landing valve complete as per IS: 5290 alongwith 4" x 150# WNRF Flange_L3 | Item 10.C.940 | 40 | EA |
| 97 | 97 | "Radiographic Inspection: Inspection of welding by radiographic method on all types of piping including processing of films and interpreting the results of we ld quality and reporting the same to the Site Engineer together with recommendations as to the acceptability or otherwise of the wel ds, submitting the finished radiographic films as may be approved or directed by Engineer-in-Charge inclusive of supply of all peson nel, labour, materials, equipment, consumable, inputs, etc. and providing all services complete in all respects as envisaged in the contract documents. Note: i) Payment will be on the basis of number of welds of the respective size radiographed and shall be all inclusive for the complete job of radiographic inspection as envisaged in the contract document. ii) Radiography not involving full girth weld will be paid at 50% of the rate for full girth weld for the respective size. iii) For set-on type branch welding, the rate for radiography will be as applicable to the branch pipe size. iv) Repeat radiography of individual welds due to defective films or repair of welds shall be done at contractor's cost. In case where radiography is not possible: v) Verification by utrasonic testing shall be done at contractors cost. vi) Magenetic particle inspection as and where required shall be done at Contractors cost." | Item 10.C.950 | ||
| 98 | 98 | 20" NB Pipe Joints RT | Item 10.C.960 | 5 | EA |
| 99 | 99 | 18" NB Pipe Joints RT | Item 10.C.970 | 20 | EA |
| 100 | 100 | 12" NB Pipe Joints RT | Item 10.C.980 | 20 | EA |
| 101 | 101 | 10" NB Pipe Joints RT | Item 10.C.990 | 5 | EA |
| 102 | 102 | 16" NB Pipe Joints RT | Item 10.C.1000 | 25 | EA |
| 103 | 103 | 8" NB Pipe Joints RT | Item 10.C.1010 | 25 | EA |
| 104 | 104 | 6" NB Pipe Joints RT | Item 10.C.1020 | 5 | EA |
| 105 | 105 | 4" NB Pipe Joints RT | Item 10.C.1030 | 7 | EA |
| 106 | 106 | 3" NB Pipe Joints RT | Item 10.C.1040 | 12 | EA |
| 107 | 107 | 2" NB Pipe Joints RT | Item 10.C.1050 | 12 | EA |
| 108 | 108 | 1" NB Pipe Joints RT | Item 10.C.1060 | 12 | EA |
| 109 | 109 | "Double Cut Joint Hook-up: Cutting of portion of existing piping upto and including a length of 500 mm, trimming, grinding, bevellin g the edges, adding spool piece of required length / tee and the corresponding pipe size, thickness, adjoining and welding both the ends including supply of all inputs such as labour, materials, equipment, consumables etc. necessary to perform and complete the work in all respect as per specification and instruction of the Site Engineer / EIC. Note: The job also include evacuation of product from the piping section after isolating the section and flushing with water and its disposal." | Item 10.C.1070 | ||
| 110 | 110 | 16" OD - Double Cut | Item 10.C.1080 | 2 | EA |
| 111 | 111 | Dismantling of Structures: | Item 10.C.1090 | 2 | TO |
| 112 | 112 | Dismantling of Piping Aboveground and equipments | Item 10.C.1100 | 1 | TO |
| 113 | 113 | Dismantling of Piping Underground | Item 10.C.1110 | 1 | TO |
| 114 | 114 | Development of As Built Drawings , Data Sheets etc.: | Item 10.C.1120 | 1 | LS |
| 115 | 115 | FW Network Analysis | Item 10.C.1130 | 1 | LS |
| 116 | 116 | Flexibility and piping stress analysis as per specification | Item 10.C.1140 | 1 | LS |
| 117 | 117 | Temporary Barricading | Item 10.C.1150 | 50 | M2 |
| 118 | 118 | CSW-Dumad-Composite-ITC | Item 00020 | ||
| 119 | 119 | Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cut ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including pre paration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of concrete work). | Item 20.A.180 | 36.21 | TO |
| 120 | 120 | D Mechanical | Item 20.D | ||
| 121 | 121 | "Supply and Erection of Structural Steel: Supplying at site, steel structural items such as steel plates, bars, chequered plates, angles, beams channels, commercial quality heavy pipes, C.I. Rollers, bolts & nuts, washers, grouting bolts, padding plates etc., fabrication and erection of saddle supports an d other type of supports for pipes manifolds and valves, fabrication and erection of platforms walkways, stairways etc., sand blast/ power brush cleaning, priming and painting the finished structures including supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructi ons of the Site Engineer / EIC. " | Item 20.D.10 | 27 | TON |
| 122 | 122 | "Supply and Erection of Electroforged Grating Supplying at site, steel structural items such as steel plates, bars, fabrication of gratings by electroforged method, after comple te fabrication entire gratings shall be Hot Dip galvanized, gratings shall be normany of size 810mm X 250mm for steps and 1200mm X 1 000 mm or 810mm X 1000 mm for platforms / walkways, or any size as advised by EIC. Placing gratings in a replaceable mannerbolting w ith base frame of ISA by suitable GI clamps and GI fasteners, including supply of all other inputs such as labour, materials, consum able etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructions of the Site Engineer / EIC." | Item 20.D.20 | 1 | TON |
| 123 | 123 | "Supply and Erection of GI Structural Supplying at site, GI structural items such as flat, bars, chequered plates, angles, beams channels, commercial quality pipes,bolts & nuts, washers, grouting bolts, fabrication and erection of various structures items including supply of all other inputs such as l abour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance with drawings, specificat ions and instructions of the Site Engineer / EIC." | Item 20.D.30 | 10 | KG |
| 124 | 124 | "Painting: Cleaning exposed steel surfaces of piping, equipment and valves etc. by abrasive blasting or with power wire brush (wherever abrasive blast cleaning is not possible) free of dust, grease, mill scales etc. priming with one coat of primer and painting the surfaces with two coats as per specification, with approved materials, paints, brushes, labour, equipment etc. and completing the job in all respects as per specification and instructions of the Site Engineer / EIC. All materials including supply of paint are in the scope of contractor." | Item 20.D.40 | ||
| 125 | 125 | Painting: Zinc Ethyl Slicate Primer | Item 20.D.50 | 1000 | M2 |
| 126 | 126 | Painting: High Build EPOXY MIO | Item 20.D.60 | 1000 | M2 |
| 127 | 127 | Painting: Isocynate Aliphatic Poly Urethene(PU) | Item 20.D.70 | 1000 | M2 |
| 128 | 128 | "PU /liquid epoxy Coating of under ground piping: Cleaning exposed steel surfaces of piping, equipment and valves etc. by abrasive blasting or with power wire brush (whereverabrasive blast cleaning is not possible) free of dust, grease, mill scales etc. and applying polyurethane coating(PU) using 100% solvent fr ee elastomeric plyurethane/ liquid epoxy, with approved materials, labour, equipment etc. and completing the job in all respects as per specification and instructions of the Site Engineer / EIC. All materials including supply of paint are in the scope of contractor." | Item 20.D.80 | ||
| 129 | 129 | PU /liquid epoxy Coating of under ground piping: Polyurethane Coating(PU)/ Liquid Epoxy Coating | Item 20.D.90 | 800 | M2 |
| 130 | 130 | Supply Fabrication and Erection of temporary pump strainer: Supplying at site, steel structural items such as steel plates / sheets, SS perforated sheet, SS wire mesh, square bar, and other required structural steel items, cutting, grinding, welding, brazing, sold ering, fabrication of temporary pump strainer of different types and sizes as per the drawing, sand blast/ power brush cleaning, pri ming and painting the finished structures, erection of the strainer in the spool piece provided in suction of mainline pumps at the commissionin including supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructions of the Site Engineer / EIC. | Item 20.D.100 | ||
| 131 | 131 | Supply Fabrication and Erection of temporary pump strainer: 12" mesh Size 40 | Item 20.D.110 | 4 | EA |
| 132 | 132 | Copper Strips/ Flats for Jumpers for Flanged Joits of the Product Process Piping: Supply and Installation of one copper jumper per flanged joint across the flanged joints for valves, spool piece, branch offs etc., of product process piping, The job includes cutt ing drilling of holes of required size in the copper strips/ flats for bolting purpose and complete the works in all respects as per specifications & drawings and instructions of Site Engineer/ EIC. Note:- Copper jumpers shall be installed in all the flanged join ts of Product Process piping only and not in fire water lines. | Item 20.D.120 | ||
| 133 | 133 | Copper Strips/ Flats for Jumpers for Flanged Joits of the Product Process Piping: Up to 30 mm wide x 3 mm thick Copper strip | Item 20.D.130 | 40 | EA |
| 134 | 134 | Copper Strips/ Flats for Jumpers for Flanged Joits of the Product Process Piping: 30 - 50 mm wide x 3 mm thick Copper strip | Item 20.D.140 | 20 | EA |
| 135 | 135 | Copper Strips/ Flats for Jumpers for Flanged Joits of the Product Process Piping: Up to 30 mm wide x 1 mm thick Copper strip | Item 20.D.150 | 2 | EA |
| 136 | 136 | Copper Strips/ Flats for Jumpers for Flanged Joits of the Product Process Piping: 30 - 50 mm wide x 1 mm thick Copper strip | Item 20.D.160 | 2 | EA |
| 137 | 137 | Copper Strips/ Flats for Jumpers for Flanged Joits of the Product Process Piping: 50 - 75 mm wide x 1 mm thick Copper strip | Item 20.D.170 | 2 | EA |
| 138 | 138 | "HOT/EOT CRANE: Design, manufacture, inspection & testing at manufacturer's works and supply of HOT/ EOT cranes (having main girder beam with box type construction) as per specifications, taking delivery, shifting / transporting within the pump station premises and erecting on t he shed Girder, assemblies / sub-assemblies, auxiliaries, girders etc, aligning checking for free movement of the crane from one end to other and cross movement, cleaning by sand blasting, priming, painting as per painting schedule testing of the crane with specified load in presence of the manufacturer's representative including providing all labours, materials, equipments and consumables nec essary to perform and complete the works in all respects as per specifications, drawings and instructions of Site Engineer / EIC." | Item 20.D.180 | ||
| 139 | 139 | HOT/EOT CRANE: 10 Ton capacity HOT crane for Mainline pump shed | Item 20.D.190 | 1 | EA |
| 140 | 140 | "Medium Velocity Water Sprinkler System: Design, Detailed Engineering, supply, fabrication, erection/Installation and commissioning of complete medium velocity water sprinkl er systems for Pump Shed, barrel area, filteration, metering and piping area at each location as per the details mentioned below: Design, detail engineering, drawing and development of scheme for automatic medium velocity water sprinkler system for the equipment andpiping area including supply of all material like D eluge valve(Wet Type/ Dry Type), Spray nozzles, pressure switch, pressuer gauge, piping,valves, flanges, coupling, pipe fittings, brackets, clamps, fasteners, solenoid switches, S.S piping, strainers, alongwith all accessories asper the approved scheme at site, erection and installation of piping,cabling, equipments and instruments control panel etc, provision ofcompressed air/pneumatic piping from owner's compressed air headerlocated near compressor room for Dry Type Deluge Valve includingdismantling, breaking of road etc.as required for setting out of thesystem and making good the same,hooking up the system with the hydrantnetwork,sand blast cleaning, priming and painting (Zinc Ethyl SlicatePrimer,High Build EPOXY MIO, Isocynate Aliphati c Poly Urethene(PU) insignal red colour); internal coating with liquid epoxy, Carrying outall electrical and instrumentation works to enable auto actuat ion of the deluge valve and medium velocity water sprinkler system based onalarm signal from QB sensors/ gas detectors/ flame detectors. | Item 20.D.200 | ||
| 141 | 140.01 | (Continue from S.L no.140.00) Carryingout the electronic integration of the system with the control panel andproviding alarm and automatic actuation of the deluge valves withmanual over-ride provision, testi ng & commissioning of the systemincluding cost of all labour, services, materials tools & tackles consumables, first operation & fun rnishing of operation and maintenancemanuals on lumpsum basis as per specifications, International standard procedures, approved sch eme, drawings and the direction of SiteEngineer /EIC. Note:1. The control panel and control cosole with PC will be installed underthe work of Gas detection system and the MV system is to be integratedwith the exisitng system. 2. For System Designing/Area Calculation & inter distances between block facilities refer the General layout plan and Assembly Pipin g Areaof respective Station. 3.Medium Velocity Water Sprinkler System for T-points at shall be designed considering wet type Deluge Valve as no compressed air i s available at these locations." | NIL | ||
| 142 | 141 | Medium Velocity Water Sprinkler System for Station consisting of Barrel area, filteration, metering and piping area etc | Item 20.D.210 | 1 | LS |
| 143 | 142 | Medium Velocity Water Sprinkler System for Extended Mainline Pump Shed | Item 20.D.220 | 1 | LS |
| 144 | 143 | CSW-Dumad-Composite-NonITC | Item 00030 | ||
| 145 | 144 | Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, claddings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cut ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including pre paration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of concrete work). | Item 30.A.850 | 229.08 | TO |
| 146 | 145 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations . (3) Cutting of steel shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge.] | Item 30.A.1630 | 525 | KG |
| 147 | 146 | CSW-Dumad-Supply | Item 00040 | ||
| 148 | 147 | C Mechanical | Item 40.C | ||
| 149 | 148 | Supply of Valves at respective stations as per technical specifications from approved vendors in the tender document -FOR FIRE WATER NETWORK: | Item 40.C.10 | ||
| 150 | 149 | 4"x ANSI 150# HOV F/F API 600 Gate Valve FW | Item 40.C.20 | 1 | EA |
| 151 | 150 | 1"x ANSI 800# HOV W/W API 602 Gate Valve FW | Item 40.C.30 | 10 | EA |
| 152 | 151 | 18"x ANSI 150# HOV F/F API 600 Gate Valve FW | Item 40.C.40 | 12 | EA |
| 153 | 152 | Supply of ASTM A106 Gr.B /A333 pipes at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document. | Item 40.C.50 | ||
| 154 | 153 | 1.315" ODx 0.179"WT (Sch.XS) ASTM A 106 Gr B Bare pipe | Item 40.C.60 | 150 | M |
| 155 | 154 | 2.375" ODx 0.218" WT (Sch.XS) ASTM A 106 Gr B bare pipe | Item 40.C.70 | 150 | M |
| 156 | 155 | 3.500" ODx 0.216" WT (Sch.STD) ASTM A 106 Gr B | Item 40.C.80 | 150 | M |
| 157 | 156 | 4.500" ODx 0.237" WT (Sch.STD) ASTM A 106 Gr B bare Pipe | Item 40.C.90 | 150 | M |
| 158 | 157 | Supply of ASTM A106 Gr.B /A333 pipes at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document. | Item 40.C.100 | ||
| 159 | 158 | 1.315" ODx 0.179"WT (Sch.XS) ASTM A 333 Gr 6 Bare pipe | Item 40.C.110 | 200 | M |
| 160 | 159 | 2.375" ODx 0.218" WT (Sch.XS) ASTM A 333 Gr 6 bare pipe | Item 40.C.120 | 200 | M |
| 161 | 160 | 3.500" ODx 0.216" WT (Sch.STD) ASTM A 333 Gr 6 | Item 40.C.130 | 200 | M |
| 162 | 161 | 4.500" ODx 0.237" WT (Sch.STD) ASTM A 333 Gr 6 bare Pipe | Item 40.C.140 | 50 | M |
| 163 | 162 | Supply and delivery of API 6D Ball valves for use in process piping at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document | Item 40.C.150 | ||
| 164 | 163 | 2"/3" F/F ANSI 300# A/G, API6D BALL VALVE HOV | Item 40.C.160 | 6 | EA |
| 165 | 164 | 2"/3" W/W ANSI 300# A/G, API6D BALL VALVE HOV | Item 40.C.170 | 8 | EA |
| 166 | 165 | 2" F/F ANSI 600# A/G, API6D BALL VALVE HOV | Item 40.C.180 | 25 | EA |
| 167 | 166 | 2" W/W ANSI 600# A/G, API6D BALL VALVE HOV | Item 40.C.190 | 25 | EA |
| 168 | 167 | . 1" x 800# Ball valve HOV W/W BS 5351 | Item 40.C.200 | 54 | EA |
| 169 | 168 | Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document: | Item 40.C.210 | ||
| 170 | 169 | 2"x1" x Concentric Reducer x 150# | Item 40.C.220 | 2 | EA |
| 171 | 170 | 3"x1" x Concentric Reducer X 150# | Item 40.C.230 | 2 | EA |
| 172 | 171 | 3"x1 1/2" x Concentric Reducer X 150# | Item 40.C.240 | 2 | EA |
| 173 | 172 | 16"x12" x Concentric Reducer x 150# | Item 40.C.250 | 2 | EA |
| 174 | 173 | 16"x14" x Concentric Reducer x 150# | Item 40.C.260 | 2 | EA |
| 175 | 174 | 2"X1" x 300# Concentric Reducer -ASTM A420 Gr.WPL6 | Item 40.C.270 | 4 | EA |
| 176 | 175 | 3"X1" x 300# Concentric Reducer -ASTM A420 Gr.WPL6 | Item 40.C.280 | 5 | EA |
| 177 | 176 | 3"X2" x 300# Concentric Reducer -ASTM A420 Gr.WPL6 | Item 40.C.290 | 4 | EA |
| 178 | 177 | 6"X4" x 300# Concentric Reducer -ASTM A420 Gr.WPL6 | Item 40.C.300 | 2 | EA |
| 179 | 178 | 8"X4" x 300# Concentric Reducer -ASTM A 234 WPB | Item 40.C.310 | 2 | EA |
| 180 | 179 | 8"X6" x 300# Concentric Reducer -ASTM A 234 WPB | Item 40.C.320 | 2 | EA |
| 181 | 180 | 2"x1" x Concentric Reducerx 600# | Item 40.C.330 | 4 | EA |
| 182 | 181 | 3"x1" x Concentric Reducerx 600# | Item 40.C.340 | 4 | EA |
| 183 | 182 | 3"x2" x Concentric Reducerx 600# | Item 40.C.350 | 5 | EA |
| 184 | 183 | 4"x3" x Concentric Reducer x 600# | Item 40.C.360 | 2 | EA |
| 185 | 184 | 8"x4" x Concentric Reducer x 600# | Item 40.C.370 | 2 | EA |
| 186 | 185 | 8"x6" x Concentric Reducer x 600# | Item 40.C.380 | 2 | EA |
| 187 | 186 | 16"x8" x Concentric Reducer x 600# | Item 40.C.390 | 2 | EA |
| 188 | 187 | 16"x10" x Concentric Reducer x 600# | Item 40.C.400 | 2 | EA |
| 189 | 188 | 16"x12" x Concentric Reducer x 600# | Item 40.C.410 | 2 | EA |
| 190 | 189 | 18"x16" x Concentric Reducer x 150#_ | Item 40.C.420 | 2 | EA |
| 191 | 190 | 18"x16" x Concentric Reducer x 600# | Item 40.C.430 | 2 | EA |
| 192 | 191 | 4"x2" x Concentric Reducer x 600# | Item 40.C.440 | 2 | EA |
| 193 | 192 | Corrosion Coupon: | Item 40.C.450 | ||
| 194 | 193 | Supply of TOR Fitting Complete With Plug & Cap and Full bore Threaded Ball Valve: RETRACTABLE CORROSION COUPON HOLDER, 12" | Item 40.C.460 | 2 | EA |
| 195 | 194 | Supply of TOR Fitting Complete With Plug & Cap and Full bore Threaded Ball Valve: TOR fitting complete with Caps, Plugs, O-Rings, Ni pple & 2" 600# full bore threaded ball valve. | Item 40.C.470 | 2 | EA |
| 196 | 195 | Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical sp ecifications from approved vendors specified in tender document: | Item 40.C.480 | ||
| 197 | 196 | 6" x 300# 45 deg LR Bends -ASTM A420 Gr.WPL6 | Item 40.C.490 | 2 | EA |
| 198 | 197 | 8" x 300# 45 deg LR Bends -ASTM A 234 WPB | Item 40.C.500 | 2 | EA |
| 199 | 198 | 6" ANSI 600# 45 deg LR Bends | Item 40.C.510 | 2 | EA |
| 200 | 199 | 8" ANSI 600# 45 deg LR Bends | Item 40.C.520 | 2 | EA |
| 201 | 200 | 12" ANSI 600# 45 deg LR Bends | Item 40.C.530 | 1 | EA |
| 202 | 201 | 16" x 600# 45 deg LR Bends WPHY 60/70, Sch. STD | Item 40.C.540 | 4 | EA |
| 203 | 202 | 3" x 300# 45 deg LR Bends -ASTM A420 Gr.WPL | Item 40.C.550 | 2 | EA |
| 204 | 203 | 2" x 300# 45 deg LR Bends -ASTM A420 Gr.WPL | Item 40.C.560 | 2 | EA |
| 205 | 204 | 18" x 600# 45 deg LR Bends WPHY 60/70, Sch. ST | Item 40.C.570 | 4 | EA |
| 206 | 205 | Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document: | Item 40.C.580 | ||
| 207 | 206 | 16" ANSI 150# 45 deg LR Bends | Item 40.C.590 | 1 | EA |
| 208 | 207 | 1" ANSI 150# 90 deg LR Bends | Item 40.C.600 | 4 | EA |
| 209 | 208 | 2" ANSI 150# 90 deg LR Bends | Item 40.C.610 | 4 | EA |
| 210 | 209 | 4" ANSI 150# 90 deg LR Bends | Item 40.C.620 | 30 | EA |
| 211 | 210 | 16" ANSI 150# 90 deg LR Bends | Item 40.C.630 | 1 | EA |
| 212 | 211 | 1" ANSI 300# 90 deg LR Bends -ASTM A420 Gr.WPL6 | Item 40.C.640 | 20 | EA |
| 213 | 212 | 2" ANSI 300# 90 deg LR Bends -ASTM A420 Gr.WPL6 | Item 40.C.650 | 20 | EA |
| 214 | 213 | 3" ANSI 300# 90 deg LR Bends -ASTM A420 Gr.WPL6 | Item 40.C.660 | 10 | EA |
| 215 | 214 | 4" ANSI 300# 90 deg LR Bends -ASTM A420 Gr.WPL6 | Item 40.C.670 | 5 | EA |
| 216 | 215 | 6" ANSI 300# 90 deg LR Bends -ASTM A420 Gr.WPL6 | Item 40.C.680 | 5 | EA |
| 217 | 216 | 8" ANSI 300# 90 deg LR Bends -ASTM A 234 WPB | Item 40.C.690 | 10 | EA |
| 218 | 217 | 1" ANSI 600# 90 deg LR Bends | Item 40.C.700 | 10 | EA |
| 219 | 218 | 2" ANSI 600# 90 deg LR Bends | Item 40.C.710 | 10 | EA |
| 220 | 219 | 3" ANSI 600# 90 deg LR Bends | Item 40.C.720 | 2 | EA |
| 221 | 220 | 4" ANSI 600# 90 deg LR Bends | Item 40.C.730 | 4 | EA |
| 222 | 221 | 8" ANSI 600# 90 deg LR Bends | Item 40.C.740 | 10 | EA |
| 223 | 222 | 10" ANSI 600# 90 deg LR Bends | Item 40.C.750 | 5 | EA |
| 224 | 223 | 12" ANSI 600# 90 deg LR Bends | Item 40.C.760 | 5 | EA |
| 225 | 224 | 16" ANSI 600# 90 deg LR Bends WPHY-60/70, Sch. STD | Item 40.C.770 | 15 | EA |
| 226 | 225 | 18" ANSI 150# 90 deg LR Bend | Item 40.C.780 | 10 | EA |
| 227 | 226 | 18" ANSI 600# 90 deg LR Bends WPHY-60/70, Sch. STD_E.14 | Item 40.C.790 | 20 | EA |
| 228 | 227 | 18" ANSI 150# 45 deg LR Bend | Item 40.C.800 | 10 | EA |
| 229 | 228 | Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical sp ecifications from approved vendors specified in tender document: | Item 40.C.810 | ||
| 230 | 229 | 1" ANSI 150# Equal Tee | Item 40.C.820 | 2 | EA |
| 231 | 230 | 2" ANSI 150# Equal Tee | Item 40.C.830 | 2 | EA |
| 232 | 231 | 8" ANSI 150# Equal Tee | Item 40.C.840 | 2 | EA |
| 233 | 232 | 16" X 150# Equal Tee | Item 40.C.850 | 1 | EA |
| 234 | 233 | 18" X 150# Equal Tee | Item 40.C.860 | 6 | EA |
| 235 | 234 | Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical sp ecifications from approved vendors specified in tender document: | Item 40.C.870 | ||
| 236 | 235 | 1" 300# Equal Tee - ASTM A420 Gr.WPL6 | Item 40.C.880 | 10 | EA |
| 237 | 236 | 2" 300# Equal Tee - ASTM A420 Gr.WPL6 | Item 40.C.890 | 6 | EA |
| 238 | 237 | 3" 300# Equal Tee - ASTM A420 Gr.WPL6 | Item 40.C.900 | 6 | EA |
| 239 | 238 | 4" 300# Equal Tee - ASTM A420 Gr.WPL6 | Item 40.C.910 | 1 | EA |
| 240 | 239 | 6" 300# Equal Tee - ASTM A420 Gr.WPL6 | Item 40.C.920 | 1 | EA |
| 241 | 240 | 8" 300# Equal Tee -ASTM A 234 WPB | Item 40.C.930 | 10 | EA |
| 242 | 241 | Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical sp ecifications from approved vendors specified in tender document: | Item 40.C.940 | ||
| 243 | 242 | 1" ANSI 600# Equal Tee | Item 40.C.950 | 2 | EA |
| 244 | 243 | 2" ANSI 600# Equal Tee | Item 40.C.960 | 2 | EA |
| 245 | 244 | 3" ANSI 600# Equal Tee | Item 40.C.970 | 2 | EA |
| 246 | 245 | 4" 600# Equal Tee | Item 40.C.980 | 2 | EA |
| 247 | 246 | 6" 600# Equal Tee | Item 40.C.990 | 2 | EA |
| 248 | 247 | 8" 600# Equal Tee - WPHY 52 | Item 40.C.1000 | 2 | EA |
| 249 | 248 | 10" ANSI 600# Equal Tee | Item 40.C.1010 | 2 | EA |
| 250 | 249 | 12" x 600# Equal Tee | Item 40.C.1020 | 2 | EA |
| 251 | 250 | 16" x 600# Equal Tee | Item 40.C.1030 | 9 | EA |
| 252 | 251 | 18" x 600# Equal Tee | Item 40.C.1040 | 4 | EA |
| 253 | 252 | Supply of Fire Fighting Monitor/hydrant: | Item 40.C.1050 | ||
| 254 | 253 | Stand Post Type double way fire hydrant fitted with 2 Nos of single landing valve complete as per IS: 5290 alongwith 4" x 150# WNRF Flange | Item 40.C.1060 | 40 | EA |
| 255 | 254 | High Volume Long Range HVLR Foam Monitor 750 GPM capacity stand post type with inlet flange of 4" X 150# | Item 40.C.1070 | 12 | EA |
| 256 | 255 | FIRE FIGHTING EQUIPMENT: Supply and delivery of Fire Fighting Equipment at respective stations as per Station wise Break up of mater ial supply and as per technical specifications from approved vendors specified in tender document. | Item 40.C.1080 | ||
| 257 | 256 | 75 kg DCP Extinguisher | Item 40.C.1090 | 2 | EA |
| 258 | 257 | 9 kg DCP Extinguisher | Item 40.C.1100 | 25 | EA |
| 259 | 258 | 4.5 kg CO2 Extinguisher | Item 40.C.1110 | 6 | EA |
| 260 | 259 | 2.5 kg clean agent extinguishers IS 15683 Marked | Item 40.C.1120 | 5 | EA |
| 261 | 260 | 2 kg clean agent extinguishers IS 15683 Marked | Item 40.C.1130 | 1 | EA |
| 262 | 261 | Fire Hose Box for keeping 2 Nos. of 15 M Type B delivery hose and one no. jet nozzle | Item 40.C.1140 | 6 | EA |
| 263 | 262 | Type B Delivery Hoses of 15 M length bearing IS-636 mark | Item 40.C.1150 | 20 | EA |
| 264 | 263 | Jet Nozzles | Item 40.C.1160 | 8 | EA |
| 265 | 264 | Fog Nozzle | Item 40.C.1170 | 2 | EA |
| 266 | 265 | Universal Nozzle | Item 40.C.1180 | 2 | EA |
| 267 | 266 | Foam Branch pipe | Item 40.C.1190 | 2 | EA |
| 268 | 267 | Water curtain nozzle | Item 40.C.1200 | 2 | EA |
| 269 | 268 | Sand drum with scoop | Item 40.C.1210 | 8 | EA |
| 270 | 269 | Pair of Rubber hand gloves for Electrical work bearing IS mark | Item 40.C.1220 | 2 | EA |
| 271 | 270 | First Aid Box with Snake serum | Item 40.C.1230 | 2 | EA |
| 272 | 271 | Fire Bucket | Item 40.C.1240 | 8 | EA |
| 273 | 272 | Safety Helmet | Item 40.C.1250 | 20 | EA |
| 274 | 273 | Strecher WITH BLANKET | Item 40.C.1260 | 1 | EA |
| 275 | 274 | Explosimeter | Item 40.C.1270 | 3 | EA |
| 276 | 275 | Rescuscitor | Item 40.C.1280 | 1 | EA |
| 277 | 276 | Electrical Siren | Item 40.C.1290 | 1 | EA |
| 278 | 277 | Hand Operated siren | Item 40.C.1300 | 2 | EA |
| 279 | 278 | Water gel blanket | Item 40.C.1310 | 1 | EA |
| 280 | 279 | Safety Torch | Item 40.C.1320 | 3 | EA |
| 281 | 280 | Wind socks | Item 40.C.1330 | 4 | EA |
| 282 | 281 | PA system/ Loudhailer/ megaphone | Item 40.C.1340 | 1 | EA |
| 283 | 282 | Red & Green flag (Pairs) 2 nos in each colour | Item 40.C.1350 | 1 | EA |
| 284 | 283 | Extinguisher box for 9 kg DCP Extinguishers | Item 40.C.1360 | 6 | EA |
| 285 | 284 | Dry Chemical Powder silliconised potassiun bicarbonate type IS marked, pack in 10Kg | Item 40.C.1370 | 100 | EA |
| 286 | 285 | CO2 cartridge - 200 gm capacity for 9 kg | Item 40.C.1380 | 10 | EA |
| 287 | 286 | CO2 cartridge - 3.2 kg capacity for 75 kg DCP extinguisher | Item 40.C.1390 | 1 | EA |
| 288 | 287 | Emergency Kit: Supply and delivery of Emergency Kit consisting oflisted emergency equipments as per Annexure-VII | Item 40.C.1400 | 1 | EA |
| 289 | 288 | Flame Arrestor:Supply and delivery of following mentioned Flame Arrestor at respective stations as per Station wise Break up of mate rial supply and as per technical specifications indicated in tender docuemnts: | Item 40.C.1410 | ||
| 290 | 289 | 4" Flame Arrester | Item 40.C.1420 | 1 | EA |
| 291 | 290 | Supply of Valves at respective stations as per technical specifications from approved vendors in the tender document: | Item 40.C.1430 | ||
| 292 | 291 | 2"x ANSI 300# F/F BS-1873 GLOBE Valve | Item 40.C.1440 | 1 | EA |
| 293 | 292 | 8"x ANSI 300# F/F BS-1873 GLOBE Valve | Item 40.C.1450 | 1 | EA |
| 294 | 293 | 2"x ANSI 600# F/F BS-1873 GLOBE Valve | Item 40.C.1460 | 15 | EA |
| 295 | 294 | 4"x ANSI 600# F/F BS-1873 GLOBE Valve | Item 40.C.1470 | 2 | EA |
| 296 | 295 | 1"x ANSI 800# W/W BS-1873 GLOBE VALVE | Item 40.C.1480 | 30 | EA |
| 297 | 296 | 18"x ANSI 600# F/F BS-1873 GLOBE Valve | Item 40.C.1490 | 1 | EA |
| 298 | 297 | 16"x ANSI 600# F/F BS-1873 GLOBE Valve | Item 40.C.1500 | 1 | EA |
| 299 | 298 | 3"x ANSI 300# F/F BS-1873 GLOBE Valve | Item 40.C.1510 | 1 | EA |
| 300 | 299 | 3"x ANSI 300# F/F BS-1873 GLOBE Valve | Item 40.C.1520 | 1 | EA |
| 301 | 300 | Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical sp ecifications from approved vendors specified in tender document: | Item 40.C.1530 | ||
| 302 | 301 | 1" 3000# HALF COUPLING | Item 40.C.1540 | 100 | EA |
| 303 | 302 | 1" size 3000# St. NIPPLE | Item 40.C.1550 | 100 | EA |
| 304 | 303 | 1X3/4" size 3000# Reducer Nipple | Item 40.C.1560 | 50 | EA |
| 305 | 304 | "Supply of IS: 3589, Gr. Fe 410 pipes with internal coating at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document. Cost shall be inclusive of all charges incl uding charges for bare pipe, internal coating, inpsection of materials by approved TPI, Taxes etc. Note: 1) Internal coating shall be carried out at site. 2) The rate for the Fire Water pipe is inclusive of internal coating. No separate payment shall be made for internal coating at site ." | Item 40.C.1570 | ||
| 306 | 305 | 16" ODx 0.250" WT IS3589 FE410 Pipe Sch. 10 | Item 40.C.1580 | 20 | M |
| 307 | 306 | 18" ODx 0.250" WT IS3589 FE410 Pipe Sch. 10 | Item 40.C.1590 | 1100 | M |
| 308 | 307 | SPECTACLE BLINDS:Supply and delivery of following mentioned Spectacle Blinds at respective stations as per Station wise Break up of material supply and as per technical specifications indicated in tender docuemnts. (As per ASME B16.48): | Item 40.C.1600 | ||
| 309 | 308 | 2" Spectacle Blind 300# F/F A/G - ASTM A350 LF2 | Item 40.C.1610 | 4 | EA |
| 310 | 309 | 1" Spectacle Blind 600# F/F A/G - ASTM A350 LF2 | Item 40.C.1620 | 2 | EA |
| 311 | 310 | 2" Spectacle Blind 600# F/F A/G - ASTM A350 LF2 | Item 40.C.1630 | 160 | EA |
| 312 | 311 | 4" Spectacle Blind 600# F/F A/G - ASTM A350 LF2 | Item 40.C.1640 | 2 | EA |
| 313 | 312 | 8" Spectacle Blind 600# F/F A/G - ASTM A105 | Item 40.C.1650 | 2 | EA |
| 314 | 313 | 12" Spectacle Blind 600# F/F A/G - ASTM A105 | Item 40.C.1660 | 12 | EA |
| 315 | 314 | 18" Spectacle Blind 600# F/F A/G - ASTM A105 | Item 40.C.1670 | 4 | EA |
| 316 | 315 | 16" Spectacle Blind 600# F/F A/G - ASTM A105 | Item 40.C.1680 | 11 | EA |
| 317 | 316 | Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document: | Item 40.C.1690 | ||
| 318 | 317 | 1" SWMG ANSI 150# | Item 40.C.1700 | 10 | EA |
| 319 | 318 | 2" SWMG ANSI 150# | Item 40.C.1710 | 4 | EA |
| 320 | 319 | 4" SWMG ANSI 150# | Item 40.C.1720 | 90 | EA |
| 321 | 320 | 6" SWMG ANSI 150# | Item 40.C.1730 | 2 | EA |
| 322 | 321 | 8" SWMG ANSI 150# | Item 40.C.1740 | 2 | EA |
| 323 | 322 | 16" SWMG ANSI 150# | Item 40.C.1750 | 10 | EA |
| 324 | 323 | 18" SWMG ANSI 150# | Item 40.C.1760 | 220 | EA |
| 325 | 324 | Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document: | Item 40.C.1770 | ||
| 326 | 325 | 1" SWMG ANSI 300# | Item 40.C.1780 | 40 | EA |
| 327 | 326 | 2" SWMG ANSI 300# | Item 40.C.1790 | 14 | EA |
| 328 | 327 | 3" SWMG ANSI 300# | Item 40.C.1800 | 4 | EA |
| 329 | 328 | 4" SWMG ANSI 300# | Item 40.C.1810 | 4 | EA |
| 330 | 329 | 6" SWMG ANSI 300# | Item 40.C.1820 | 4 | EA |
| 331 | 330 | 8" SWMG ANSI 300# | Item 40.C.1830 | 21 | EA |
| 332 | 331 | Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document: | Item 40.C.1840 | ||
| 333 | 332 | 1" SWMG ANSI 600# | Item 40.C.1850 | 35 | EA |
| 334 | 333 | 2" SWMG ANSI 600# | Item 40.C.1860 | 100 | EA |
| 335 | 334 | 3" SWMG ANSI 600# | Item 40.C.1870 | 3 | EA |
| 336 | 335 | 4" SWMG ANSI 600# | Item 40.C.1880 | 9 | EA |
| 337 | 336 | 6" SWMG ANSI 600# | Item 40.C.1890 | 4 | EA |
| 338 | 337 | 8" SWMG ANSI 600# | Item 40.C.1900 | 11 | EA |
| 339 | 338 | 10" SWMG ANSI 600# | Item 40.C.1910 | 4 | EA |
| 340 | 339 | 12" SWMG ANSI 600# | Item 40.C.1920 | 44 | EA |
| 341 | 340 | 16" SWMG ANSI 600# | Item 40.C.1930 | 50 | EA |
| 342 | 341 | 18" SWMG ANSI 600 | Item 40.C.1940 | 12 | EA |
| 343 | 342 | Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document. | Item 40.C.1950 | ||
| 344 | 343 | Fasteners for Flanges 1" x 150# (0.500" Dia. X 3.00" Length ) | Item 40.C.1960 | 100 | EA |
| 345 | 344 | Fasteners for Flanges 2" x 150# (0.625" Dia. X 3.75" Length ) | Item 40.C.1970 | 50 | EA |
| 346 | 345 | Fasteners for Flanges 3" x 150# (0.625" Dia. X 4.00" Length ) | Item 40.C.1980 | 50 | EA |
| 347 | 346 | Fasteners for Flanges 4" x 150# (0.625" Dia. X 4.00" Length ) | Item 40.C.1990 | 720 | EA |
| 348 | 347 | Fasteners for Flanges 6" x 150# (0.750" Dia. X 4.50" Length) | Item 40.C.2000 | 50 | EA |
| 349 | 348 | Fasteners for Flanges 10" x 150# (0.875" Dia. X 5.25" Length ) | Item 40.C.2010 | 50 | EA |
| 350 | 349 | Fasteners for Flanges 16" x 150# (1.000" Dia. X 6.00" Length ) | Item 40.C.2020 | 32 | EA |
| 351 | 350 | Fasteners for Flanges 18" x 150# (1.125" Dia. X 6.50" Length) | Item 40.C.2030 | 480 | EA |
| 352 | 351 | Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document. | Item 40.C.2040 | ||
| 353 | 352 | Fasteners for Flanges 1" x 300# (0.625" Dia. X 3.50" Length ) | Item 40.C.2050 | 200 | EA |
| 354 | 353 | Fasteners for Flanges 2" x 300# /1" x 300# extended stud length for flanges with spectacle blind (0.625" Dia. X 4" Length ) | Item 40.C.2060 | 24 | EA |
| 355 | 354 | Fasteners for Flanges 3" x 300# (0.75" Dia. X 4.75" Length ) | Item 40.C.2070 | 32 | EA |
| 356 | 355 | Fasteners for Flanges 8" x 300# (0.875" Dia. X 6.25" Length) | Item 40.C.2080 | 252 | EA |
| 357 | 356 | Fasteners for Flanges 2" x 300# (0.625" Dia. X 4.75" Length ) - extended stud length for flanges with spectacle blind. | Item 40.C.2090 | 24 | EA |
| 358 | 357 | Fasteners for Flanges 8" x 300# (0.875" Dia. X 7.5" Length) - extended stud length for flanges with spectacle blind. | Item 40.C.2100 | 108 | EA |
| 359 | 358 | Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document. | Item 40.C.2110 | ||
| 360 | 359 | Fasteners for Flanges 1" x 600# (0.625" Dia. X 4.00" Length ) | Item 40.C.2120 | 112 | EA |
| 361 | 360 | Fasteners for Flanges 2" x 600# (0.625" Dia. X 4.75" Length ) | Item 40.C.2130 | 640 | EA |
| 362 | 361 | Fasteners for Flanges 3" x 600# (0.750" Dia. X 5.50" Length) | Item 40.C.2140 | 12 | EA |
| 363 | 362 | Fasteners for Flanges 4" x 600# (0.875" Dia. X 6.50" Length ) | Item 40.C.2150 | 56 | EA |
| 364 | 363 | Fasteners for Flanges 6" x 600# (1.000" Dia. X 7.50" Length ) | Item 40.C.2160 | 24 | EA |
| 365 | 364 | Fasteners for Flanges 8" x 600# (1.125" Dia. X 8.25" Length ) | Item 40.C.2170 | 84 | EA |
| 366 | 365 | Fasteners for Flanges 10" x 600# (1.250" Dia. X 9.50" Length ) | Item 40.C.2180 | 12 | EA |
| 367 | 366 | Fasteners for Flanges 12" x 600# (1.250" Dia. X 9.75" Length ) | Item 40.C.2190 | 800 | EA |
| 368 | 367 | Fasteners for Flanges 16" x 600# (1.500" Dia. X 11.00" Length ) | Item 40.C.2200 | 780 | EA |
| 369 | 368 | Fasteners for Flanges 18" x 600# (1.605" Dia. X 12.00" Length ) | Item 40.C.2210 | 180 | EA |
| 370 | 369 | Fasteners for Flanges 2" x 600# ( 0.625" Dia. X 5.75" Length ) - extended stud length for flanges with spectacle blind | Item 40.C.2220 | 160 | EA |
| 371 | 370 | Fasteners for Flanges 3" x 600# ( 0.75" Dia. X 6.75" Length ) - extended stud length for flanges with spectacle blind | Item 40.C.2230 | 12 | EA |
| 372 | 371 | Fasteners for Flanges 4" x 600# ( 0.875" Dia. X 7.75" Length ) - extended stud length for flanges with spectacle blind | Item 40.C.2240 | 16 | EA |
| 373 | 372 | Fasteners for Flanges 6" x 600# (1.0" Dia. X 9.0" Length) - extended stud length for flanges with spectacle blind | Item 40.C.2250 | 24 | EA |
| 374 | 373 | Fasteners for Flanges 8" x 600# (1.125" Dia. X 10" Length) - extended stud length for flanges with spectacle blind | Item 40.C.2260 | 24 | EA |
| 375 | 374 | Fasteners for Flanges 10" x 600# (1.25" Dia. X 11.5" Length ) - extended stud length for flanges with spectacle blind | Item 40.C.2270 | 12 | EA |
| 376 | 375 | Fasteners for Flanges 12" x 600# ( 1.25" Dia. X 12" Length ) - extended stud length for flanges with spectacle blind | Item 40.C.2280 | 240 | EA |
| 377 | 376 | Fasteners for Flanges 18" x 600# (1.605" Dia. X 14.75" Length | Item 40.C.2290 | 80 | EA |
| 378 | 377 | Fasteners for Flanges 16" x 600# (1.500" Dia. X 14.00" Length | Item 40.C.2300 | 220 | EA |
| 379 | 378 | Supply and delivery of Steel Flanges at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document: | Item 40.C.2310 | ||
| 380 | 379 | 1", BLRF FLANGE, ANSI - 150# (B 16.5) | Item 40.C.2320 | 2 | EA |
| 381 | 380 | 2", BLRF FLANGE, ANSI - 150# (B 16.5) | Item 40.C.2330 | 2 | EA |
| 382 | 381 | 4", BLRF FLANGE, ANSI - 150# (B 16.5) | Item 40.C.2340 | 2 | EA |
| 383 | 382 | 16", BLRF FLANGE, ANSI - 150# (B 16.5) | Item 40.C.2350 | 2 | EA |
| 384 | 383 | 1", SORF FLANGE, ANSI - 150# (B 16.5) | Item 40.C.2360 | 10 | EA |
| 385 | 384 | 2", SORF FLANGE, ANSI - 150# (B 16.5) | Item 40.C.2370 | 10 | EA |
| 386 | 385 | 4", SORF FLANGE, ANSI - 150# (B 16.5) | Item 40.C.2380 | 90 | EA |
| 387 | 386 | 16", SORF FLANGE, ANSI - 150# (B 16.5) | Item 40.C.2390 | 2 | EA |
| 388 | 387 | 18", SORF FLANGE, ANSI - 150# (B 16.5 | Item 40.C.2400 | 30 | EA |
| 389 | 388 | Supply and delivery of Steel Flanges at respective stations as per Station wise Break up of material supply and as per technical spe cifications from approved vendors specified in tender document: | Item 40.C.2410 | ||
| 390 | 389 | 1", BLRF FLANGE,ANSI - 300# (B 16.5)-ASTM A350 LF2 | Item 40.C.2420 | 2 | EA |
| 391 | 390 | 2", BLRF FLANGE, ANSI - 300# (B 16.5)-ASTM A350 LF2 | Item 40.C.2430 | 4 | EA |
| 392 | 391 | 3", BLRF FLANGE, ANSI - 300# (B 16.5)-ASTM A350 LF2 | Item 40.C.2440 | 4 | EA |
| 393 | 392 | 1", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A350 LF2 | Item 40.C.2450 | 48 | EA |
| 394 | 393 | 2", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A350 LF2 | Item 40.C.2460 | 10 | EA |
| 395 | 394 | 3", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A350 LF2 | Item 40.C.2470 | 4 | EA |
| 396 | 395 | 4", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A350 LF2 | Item 40.C.2480 | 2 | EA |
| 397 | 396 | 6", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A350 LF2 | Item 40.C.2490 | 2 | EA |
| 398 | 397 | 8", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A105 | Item 40.C.2500 | 2 | EA |
| 399 | 398 | 10", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A105 | Item 40.C.2510 | 2 | EA |
| 400 | 399 | Supply and delivery of Steel Flanges at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document: | Item 40.C.2520 | ||
| 401 | 400 | 1", BLRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2530 | 10 | EA |
| 402 | 401 | 2", BLRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2540 | 10 | EA |
| 403 | 402 | 4", BLRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2550 | 2 | EA |
| 404 | 403 | 8", BLRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2560 | 2 | EA |
| 405 | 404 | 16", BLRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2570 | 2 | EA |
| 406 | 405 | 18", BLRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2580 | 2 | EA |
| 407 | 406 | 1", WNRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2590 | 10 | EA |
| 408 | 407 | 2", WNRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2600 | 100 | EA |
| 409 | 408 | 3", WNRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2610 | 4 | EA |
| 410 | 409 | 4", WNRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2620 | 99 | EA |
| 411 | 410 | 6", WNRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2630 | 2 | EA |
| 412 | 411 | 8", WNRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2640 | 11 | EA |
| 413 | 412 | 10", WNRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2650 | 4 | EA |
| 414 | 413 | 12", WNRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2660 | 44 | EA |
| 415 | 414 | 16", WNRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2670 | 50 | EA |
| 416 | 415 | 18", WNRF FLANGE, ANSI - 600# (B 16.5) | Item 40.C.2680 | 13 | EA |
| 417 | 416 | Supply of Valves at respective stations as per technical specifications from approved vendors in the tender document: | Item 40.C.2690 | ||
| 418 | 417 | 1" x 1" 300# x300# F/F TRV | Item 40.C.2700 | 10 | EA |
| 419 | 418 | 1" x 1" 600# x300# F/F TRV | Item 40.C.2710 | 30 | EA |
| 420 | 419 | Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document: | Item 40.C.2720 | ||
| 421 | 420 | 2" x 1" ANSI 150# Un Equal Tee | Item 40.C.2730 | 2 | EA |
| 422 | 421 | 3" x 1" ANSI 150# Un Equal Tee | Item 40.C.2740 | 2 | EA |
| 423 | 422 | 3" x 2" ANSI 150# Un Equal Tee | Item 40.C.2750 | 2 | EA |
| 424 | 423 | 4" x 1" ANSI 150# Un Equal Tee | Item 40.C.2760 | 2 | EA |
| 425 | 424 | 4" x2" ANSI 150# Un Equal Tee | Item 40.C.2770 | 2 | EA |
| 426 | 425 | 4" x 3" ANSI 150# Un Equal Tee | Item 40.C.2780 | 2 | EA |
| 427 | 426 | 18"x 16" ANSI 150# UnEqual Tee | Item 40.C.2790 | 2 | EA |
| 428 | 427 | Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document: | Item 40.C.2800 | ||
| 429 | 428 | 2"x1" 300# Unequal Tee -ASTM A420 Gr.WPL6 | Item 40.C.2810 | 15 | EA |
| 430 | 429 | 4"x1" 300# Unequal Tee -ASTM A420 Gr.WPL6 | Item 40.C.2820 | 2 | EA |
| 431 | 430 | 4"x2" 300# Unequal Tee -ASTM A420 Gr.WPL6 | Item 40.C.2830 | 2 | EA |
| 432 | 431 | 8"x6" x 300# Unequal Tee -ASTM A 234 WPB | Item 40.C.2840 | 2 | EA |
| 433 | 432 | 4"x3" 300# Unequal Tee -ASTM A420 Gr.WPL | Item 40.C.2850 | 2 | EA |
| 434 | 433 | 3"x2" 300# Unequal Tee -ASTM A420 Gr.WPL | Item 40.C.2860 | 2 | EA |
| 435 | 434 | 3"x1" 300# Unequal Tee -ASTM A420 Gr.WPL | Item 40.C.2870 | 2 | EA |
| 436 | 435 | Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document: | Item 40.C.2880 | ||
| 437 | 436 | 2"x1" 600# Un Equal Tee | Item 40.C.2890 | 10 | EA |
| 438 | 437 | 3"x1" 600# Un Equal Tee | Item 40.C.2900 | 3 | EA |
| 439 | 438 | 3"x2" 600# Un Equal Tee | Item 40.C.2910 | 3 | EA |
| 440 | 439 | 4"x1" 600# Unequal Tee | Item 40.C.2920 | 2 | EA |
| 441 | 440 | 4"x2" 600# Unequal Tee | Item 40.C.2930 | 2 | EA |
| 442 | 441 | 8"x6" 600# Unequal Tee | Item 40.C.2940 | 2 | EA |
| 443 | 442 | 16"x12" x 600# Unequal tee | Item 40.C.2950 | 2 | EA |
| 444 | 443 | 18" x 16" ANSI 600# Unequal Tee | Item 40.C.2960 | 4 | EA |
| 445 | 444 | 18" x 12" ANSI 600# Unequal Tee | Item 40.C.2970 | 12 | EA |
| 446 | 445 | 18" x 8" ANSI 600# Unequal Tee | Item 40.C.2980 | 1 | EA |
| 447 | 446 | 4" x3" ANSI 600# Unequal Tee | Item 40.C.2990 | 2 | EA |
| 448 | 447 | 4" x 2" ANSI 600# Unequal Tee | Item 40.C.3000 | 2 | EA |
| 449 | 448 | Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical sp ecifications from approved vendors specified in tender document: | Item 40.C.3010 | ||
| 450 | 449 | 16"x2" X 150# Weld-o-let | Item 40.C.3020 | 1 | EA |
| 451 | 450 | 16"x4" X 150# Weld-o-let | Item 40.C.3030 | 1 | EA |
| 452 | 451 | 6"x2" x 300# Weld-o-let | Item 40.C.3040 | 4 | EA |
| 453 | 452 | 8"x2" x 300# Weld-o-let | Item 40.C.3050 | 30 | EA |
| 454 | 453 | 8"x2" x 600# Weld-o-let | Item 40.C.3060 | 20 | EA |
| 455 | 454 | 12"x2" x 600# Weld-o-let | Item 40.C.3070 | 4 | EA |
| 456 | 455 | 12"x3" x 600# Weld-o-let | Item 40.C.3080 | 4 | EA |
| 457 | 456 | 16"x2" x 600# Weld-o-let | Item 40.C.3090 | 50 | EA |
| 458 | 457 | 18"x4" x 600# Weld-o-let | Item 40.C.3100 | 1 | EA |
| 459 | 458 | 18"x3" x 600# Weld-o-let | Item 40.C.3110 | 4 | EA |
| 460 | 459 | 18"x2" x 600# Weld-o-let | Item 40.C.3120 | 25 | EA |
| 461 | 460 | 16"x3" x 600# Weld-o-let | Item 40.C.3130 | 2 | EA |
| 462 | 461 | 8"x3" x 300# Weld-o-let | Item 40.C.3140 | 2 | EA |
| 463 | 462 | 18"x4" x 150# Weld-o-let | Item 40.C.3150 | 10 | EA |
| 464 | 463 | 18"x2" x 150# Weld-o-let | Item 40.C.3160 | 4 | EA |
| 465 | 464 | Note :- THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST." |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
