Provision Of 01 X Toilet & 01 X Urinal For Office Area For Ap-253 At K Nallah, Provn Of Ceiling Fans For 169 Mh At Surankote, For 10 Jak Rif At Mendhar Base & For 10 Inf Bde Camp At Kg Top (Spl Wks), Provn Of Water Treatment Plant & Chemical Dozing System
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Mar 2021
0 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE 881 EWS C/o 56 APO → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of 01 X Toilet & 01 X Urinal For Office Area For Ap-253 At K Nallah, Provn Of Ceiling Fans For 169 Mh At Surankote, For 10 Jak Rif At Mendhar Base & For 10 Inf Bde Camp At Kg Top ( Spl Wks ) , Provn Of Water Treatment Plant & Chemical Dozing System With Allied Infra For Water Supply System At Stn Hq Kg, Installation Of 20 Solar Light Incl Assy At Kg Top And Special Repair / Replacement Of Ber Plants And Eqpt In Aor Of Stn Hq Kg Under Ge 881 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Mar-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-Mar-2021 |
BOQ
| Name of Work: - PROVN OF 01 X TOILET & 01 X URINAL FOR OFFICE AREA FOR AP-253 AT K NALLAH, PROVN OF CEILING FANS FOR 169 MH AT SURANKOTE, FOR 10 JAK RIF AT MENDHAR BASE & FOR 10 INF BDE CAMP AT KG TOP (SPL WKS), PROVN OF WATER TREATMENT PLANT & CHEMICAL DOZING SYSTEM WITH ALLIED INFRA FOR WATER SUPPLY SYSTEM AT STN HQ KG, INSTALLATION OF 20 SOLAR LIGHT INCL ASSY AT KG TOP AND SPECIAL REPAIR/ REPLACEMENT OF BER PLANTS AND EQPT IN AOR OF STN HQ KG UNDER GE 881 EWS | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Schedule 'A' Part-I (Building Work) JOB NO. KG/RW/05/2020-21 (Toilet & Urinal block at K Nallah) | |||
| 2 | 1.01 | Total amount of Sch 'A' Part-I (Building work) brought forward from srl page No-31. | 1 | Each | |
| 3 | 2 | Schedule 'A' Part-II (Internal Water Supply works) JOB NO. KG/RW/05/2020-21 (Toilet & Urinal block at K Nallah) | |||
| 4 | 2.01 | Total amount of Sch 'A' Part-II(Internal Water Supply works) brought forward from srl page No-32 | 1 | Each | |
| 5 | 3 | Schedule 'A' Part-III (Plumbing works) JOB NO. KG/RW/05/2020-21 (Toilet & Urinal block at K Nallah) | |||
| 6 | 3.01 | Total amount of Sch 'A' Part-III(Plumbing works) brought forward from srl page No-33 | 1 | Each | |
| 7 | 4 | Schedule 'A' Part-IV (Sec-I) (Internal Electrification works) JOB NO. KG/RW/05/2020-21 (Toilet & Urinal block at K Nallah) | |||
| 8 | 4.01 | Total amount of Sch 'A' Part-IV (Internal Electrification works) brought forward from srl page No-35 | 1 | Each | |
| 9 | 5 | Schedule 'A' Part-IV (Sec-II) (Internal Electrification works) JOB NO. KG/RW/05/2020-21 (Toilet & Urinal block at K Nallah) | |||
| 10 | 5.01 | M&L for angle holder made out of poly carbonate lamp holder with back plate fixed on PVC square block with LED lamp CDL 9 watt, complete all as specified.\nMake of LED lamp:- Havells cat part No LHLDEUEEML8R009 or Equivalent in Bajaj/ Philips/ C&S Electric/ CG | 2 | Each | |
| 11 | 5.02 | S&F Decorative Tube light fitting LED 20W tube Rod made out of basic all purpose surface and wall mounted LED batten with aluminum housing & integrated electronic driver. complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed. \nMake:-Havells Cat Part No:-LUMILINEPLUSBS20WLED865SPCSS or Equivalent in Bajaj/ Philips/ C&S Electric/ CG\n\n | 3 | Each | |
| 12 | 5.03 | S&F LED street light fittings 25W made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 complete with hosing with all accessories pre wired with and including 40mm dia GI pipe bracket of 1.2 mtr made to shape as required fixed on wall or pole with FI clamp of required shap & 40x6mm siize, nut, bolts, washers and making connection with three core copper flexible cable of suitable size to light fitting fixed in repairs, complete all as specified and directed. \nMake:-\nHavells Cat Part No:-ENDURAPEARLSL25WLED757SASYTOPCMP or Equivalent in Bajaj/ Philips/ C&S Electric/ CG | 2 | Each | |
| 13 | 5.04 | S&F MCB single pole and neutral 6 to 32 amps 240 volts 10 KA 'C' series all as specified. \nMake:- Havells cat part No-DHMGCSNF006-032 or Equivalent in L&T/ ABB/ Scheneider/ Seimens/ Legrand/ C&S Electric | 1 | Each | |
| 14 | 5.05 | S&F MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series fixed in repair, complete all as specified. \nMake:-Havells cat part No-DHMGCSPF006-032 or equivalent in L&T/ ABB/ Scheneider/ Seimens/ Legrand/ C&S Electric | 2 | Each | |
| 15 | 5.06 | S&F Heavy duty exhaust Fan 300mm sweep 1400 RPM, single phase 240 Volts AV 50Hz including all connecting accessories, complate all as specified and directed.\nMake:- Crompton cat part No-EXHD300-4-1 or Equivalent in Bajaj/ Havells/ | 1 | Each | |
| 16 | 6 | Schedule 'A'Part-V(Sec-I) (Sewage Disposal Works) JOB NO. KG/RW/05/2020-21 (Toilet & Urinal block at K Nallah) | |||
| 17 | 6.01 | Total amount of Sch 'A' Part-V(Sec-I) (Sewage Disposal WorKs) brought forward from srl page No-37 | 1 | Each | |
| 18 | 7 | Schedule 'A'Part-V(Sec-II) (Sewage Disposal Works) JOB NO. KG/RW/05/2020-21 (Toilet & Urinal block at K Nallah) | |||
| 19 | 7.01 | Construction of conventional type on site LLDPE septic tank for 5 users designed to carry sewage and sludge water with & including earhtwork in any type of soil and mass concrete in PCC 1:4:8 below foundation, vent shaft, connection etc. complete all as specified. | 1 | Each | |
| 20 | 7.02 | Construction of soakage well (brick masonry) of 1.20m internal dia and 1.50m deep below inlet level incl necessary earth work, filling with brick bats of gauge 40 to 80mm, SWG inlet pipe junction 150mm bore including all other relevant works, complete, all as specified and directed as per drawing present in the office of the Engg-in-charge. | 1 | Each | |
| 21 | 8 | Schedule 'A'Part-VI (External water supply Works) JOB NO. KG/RW/05/2020-21 (Toilet & Urinal block at K Nallah) | |||
| 22 | 8.01 | Total amount of Sch 'A' Part-VI (External water supply Works) brought forward from srl page No-38 | 1 | Each | |
| 23 | 9 | Schedule 'A'Part-VII(External Electrification Works) JOB NO. KG/RW/05/2020-21 (Toilet & Urinal block at K Nallah) | |||
| 24 | 9.01 | Total amount of Sch 'A' Part-VII (External Electrification Works) brought forward from srl page No-39 | 1 | Each | |
| 25 | 10 | Schedule 'A'Part- VIII (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as \"Rs 0.00\" under Col. 5 siginifies this fact only.(JOB NO. KG/MW/07/2020-21)(Provn of ceiling fans for 169 MH at Surankote), (JOB No. KG/MW/08/2020-21)(Provn of ceiling fan for 10 JAK RIF at Mendhar base), (JOB No. KG/MW/13/2020-21)(Provn of ceiling fan for 10 INF BDE at KG Top), (JOB No. KG/LBW-04/2020-21)(Provn of water treatment plant & chemical dosing system at STN HQ KG), (JOB No. KG/LBW-05/2020-21)(Installation of 20 solar light at KG Top), (JOB No. KG/SR(E/M)/02/2020-21)(Spl repair/ replacement of BER plants at STN HQ KG) and (JOB No. 25 RR/05/ REV WK/2020-21 (Provn of 02 x 15 KVA DG sets for 25 RR BN) | |||
| 26 | 11 | M&L for Point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc one light/ fan point controlled by one way switch 6 Amp complete all as specified and directed. | 25 | Per Point | |
| 27 | 12 | S&F Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.\nMake:-Havells/Anchor/Cona | 25 | Each | |
| 28 | 13 | S&F Ceiling rose, 3 phase PVC/poly carbonate, insulated body, complete all as specified and directed.\nMake:-Havells/Anchor/Cona | 25 | Each | |
| 29 | 14 | S&F Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed. | 25 | Each | |
| 30 | 15 | Supply and fixing of ceiling fan 1200mm sweep, 230V, 50Hz with all accessories all as specified and as directed.\nMake: Havells/ Khaintan/Usha | 25 | Each | |
| 31 | 16 | Supply and fix of Lithium based Energy Efficient Integrated Solar Street light on pole of capacity 30 Watt” in Single FRP body encases Solar PV Panel 60W Monocrystalline , Lithium Battery 12.8V 30 Ah with inbuilt BMS, High brightness W-LED(160-180 lm/watt) lamp, CRI >70, Color Temperature 6500K, Microcontroller based charge controller cum driver, automatic dimming function with PIR Motion Sensor, Dusk to Down Operation, Working temperature: (-) 10C to (+)60C, Weight: 11-13 kg, with adjustable MS clamp suitable for pole/wall mounting. Protections: Short Circuit, overload, Reverse polarity and battery protections. Firm Should Produce Vital Parameters Test report from NABL accredited lab and should be of made in India with CE & ROHS certified complete all as specified and directed.\nMake- Havells Model No : Havells (SSSSLXO141) or equivalent in Philips/ Bajaj/ C&S Electric/ CG | 20 | Each | |
| 32 | 17 | Supply and fix of 07 Mtr MS Tubler Pole with Red oxide Paint and Base Plate (200x200x6mm)complete all as specified and directed by Engineer in Charge. | 20 | Each | |
| 33 | 18 | Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for foundation of poles, stay assembly and laying of LT/HT cable as in any type of soil and getting out, complete all as specified and directed. | 7.2 | Cum | |
| 34 | 19 | Removing excavated material (soil) not exceeding 50m and deposition where dircted at a level not exceeding 1.50m above the starting point, complete all as specified and directed. | 7.2 | Cum | |
| 35 | 20 | M&L for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation of poles/stays & mass concrete complete all as specified and directed. | 7.2 | Cum | |
| 36 | 21 | M&L for Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed. | 1.5 | Cum | |
| 37 | 22 | Supply, installation, commissioning and testing of Pressure Sand Filter of capcaity 12.5 Cum per hr as per following specification:- \n(a) Plant size- dia- 1200mm, height- 1600, manhole- 01, shell thickness- 6mm, \n(b) Collection system- bed plate, 130 stainer\n(c) Pipe size & Valves- 65mm dia pipe, butterfly valves for all inlet and outlet with back wash and drain. \n(d) Dial type pressure gauges - 02 Nos, 0-7 Kg/Sqm\n(e) Flow rate- 12 to15 cum per hr\n(f) Filter media- Gravels, coarse pebbles, medium pebbles, fine pebbles coarse sand and fine sand. \n(g) Feed pump- Centrifugal pump, 4 HP, 15 cum per hr discharge\n(h) Back wash pump- Centrifugal pump, 4 HP, 25 cum per hr Disc\nall as specified and as directed by Engr-in-Charge. \nMake : Sombansi Enviro Engg Pvt Ltd or equivalent make as per zonal specification. | 1 | Each | |
| 38 | 23 | Supply, installation, commissioning and testing of chemical dosing system with FRP tank, dosing pump and control panel complete all as specified and as directed by Engr-in-Charge. \nMake: Pristine water or equivalent make as per zonal specification. | 1 | Each | |
| 39 | 24 | S&F 100mm dia GI steel water tubing ,medium grade ISI marked ,laid in trenches with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete all as specified and directed. | 36 | RM | |
| 40 | 25 | S&F 80mm dia GI steel water tubing ,medium grade ISI marked ,laid in trenches with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete all as specified and directed. | 38 | RM | |
| 41 | 26 | S&F Sluice valve cast iron of size 100mm dia ISI Marked with flanged ends drilled with iron wheels head shuts and open direction cast on it, class PN-1.6 confirming to IS:14846-2000 including necessary fixing arrangement such as rubber insulation, packing rings, jointing materials nuts, bolts, washers gaskets and packing materials, etc of suitable size including testing complete all as specified and as directed by Engr-in-Charge. | 4 | Each | |
| 42 | 27 | S&F Sluice valve cast iron of size 80mm dia ISI Marked with flanged ends drilled with iron wheels head shuts and open direction cast on it, class PN-1.6 confirming to IS:14846-2000 including necessary fixing arrangement such as rubber insulation, packing rings, jointing materials nuts, bolts, washers gaskets and packing materials, etc of suitable size including testing complete all as specified and as directed by Engr-in-Charge. | 2 | Each | |
| 43 | 28 | S&F non-return valve heavy duty of size 100mm bore, ISI Marked, flanged ends including suitable nut bolts, washers, packing sheet, etc complete with necessary arrangements for fixing complete all as specified and directed by Engr-in-Charge. | 2 | Each | |
| 44 | 29 | Supply, installation, commissioning and testing of Silent Diesel Engine Generating Set comprising of diesel engine liquid- cooled (latest IS and CPCB- Norms ) & alternator, of output capacity not less than 62.5 KVA at site (DG Set to be installed at HAA 950m above MSL and capacity of DG set shall be selected, so as to deliver 62.5 KVA in all adverse conditions) 3 phase, 4 wire, 415 V, 50 Hz., 0.8pf at 1500 RPM, with control panel having all necessary switch gears for automatic starting on main failure (AMF Panel), both coupled and aligned on a common base frame complete with standard accessories like MS Fuel tank (having the minimum fuel capacity for running of DG set continously for 12 hours), AVM Pads fitted on base frame, Control Panel with digital measurement devices, alongwith accoustic enclosure with the confirmination of latest BS/IS and complete in all respects as per latest IS Norms. \nMake :- Kirloskar Green Gen Set or Equivalent in make as per list of makes in zonal specification. \n | 1 | Each | |
| 45 | 30 | Supply, installation commissioning and testing of multistages centrifugal motor driven pumping set having, horizontal multistages type, capacity of deliver the water at the rate of 23.5 cum per Hour/392 LPM at head of 346.5 Mtr, 11 stages coupled with electric motor of 60WHP/45 KW capacity, RPM 2900, AC 415 volts , three phase, 50Hz connected through 25 sq mm single core multistranded copper conductor cable duly fixed with roof/floor/wall, alongwith, company fabricated chanel (125mm) base frame of suitable length and width duly paited with two coat of black super enameled synthetic paint over a coat of redoxide fixed to foundatrion by m,eans of appropriate size of nutbolts and washers duly grouted in foundation constructed of PCC 1:2:4 type B1 of appropriate size as per manufacturer instruction etc, complete all as specifiedand directed by Engr-in-charge . \nMake - Kirloskar or Equivalent in make as per list of makes in zonal specification. | 1 | Each | |
| 46 | 31 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 2 core complete all as specified and directed. | 800 | RM | |
| 47 | 32 | Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron earth lead strip 32x6mm by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 40mm bore including GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion, complete all as specified and directed. | 8 | Each | |
| 48 | 33 | Supply, installation, commissioning and testing of Silent Diesel Engine Generating Set comprising of diesel engine liquid- cooled (latest IS and CPCB- Norms ) & alternator, of output capacity not less than 15 KVA at site (DG Set to be installed at HAA 950m above MSL and capacity of DG set shall be selected, so as to deliver 15 KVA in all adverse conditions) single phase, 4 wire, 230 V, 50 Hz., 0.8pf at 1500 RPM, with control panel having all necessary switch gears for automatic starting on main failure (AMF Panel), both coupled and aligned on a common base frame complete with standard accessories like MS Fuel tank (having the minimum fuel capacity for running of DG set continously for 12 hours), AVM Pads fitted on base frame, Control Panel with digital measurement devices, alongwith accoustic enclosure with the confirmination of latest BS/IS and complete in all respects Including lubricating oil filled in engine, DG Set Manual comprising of following complete all as specified and directed.:-\nMake: Mahindra & Mahindra Model No. 3255 GMC2 or Kirloskar Model No. KGI-15 ASI, Product code G218 or equivalent in Cummins/ Crompton Greaves. | 2 | Each | |
| 49 | 33.01 | Prime Mover : Prime mover suitable for driving alternator 15 KVA Capacity having the suitable BHP at 1500 RPM for rated output for alternator in accordance with latest BS/IS Specification with electric starting device with all standard fittings and suitable capacity of lead acid maintenance free battery of 12 Volts 180AH -01 nos with Battery and Charger Engine over speed safety mechanism shall be incorporated. The engine shall be equipped with standard fittings as per manufacture's recommendations. | |||
| 50 | 33.02 | Engine Control Panel : \n(a) All relevant parameters shall be conventionally displayed on complete panel thereby providing easy monitoring of lub oil, pressure, Coolant Temperature, Battery charging, Ammeter, RPM, Hour meter and starting switch etc.\n (b) AMF Panel with Bye Pass arrangement for Main and DG Both supply, internal wiring and power contactors suitable for 15 KVA generator set, all as per manufacturer's recommendation. Bye Pass arrangement Main & DG set Supply along with all the parameters and accessories as per manufacturer recommendation and CPRI Approved & as per relevant IS. | |||
| 51 | 33.03 | Fuel Tank : Fuel Tank of 12 hours capacity will be installed as per the manufacturer's requirement including all necessary pipe connections from fuel tank to engine and over flow from engine to tank. | |||
| 52 | 33.04 | Engine Alternator 15 KVA output single Phase 50 HZ 230 Volts 4 wire AC supply 0.8 Power Factor at 1500 RPM self regulated self excised screen protected and drip type, insulation class 'H' continously rated brush less type conforming to relevant BS/ IS code as per current manufacturing shedule of standard manufacturer. Engine Alternator shall be mounted on specially designed base plate of rigid welded constructions with anti vibraton pads. The DG Set shall be placed on foundation including necessary civil works as per the manufacturer's recommendations/site requirement. The output of alternator not less than 15 KVA in all adverse conditiones, as the DG set to be installed at HAA 950 m above MSL. \nNote:- \n(a) The unit rate shall deemed to include the cost of Diesel and lubrication required for testing and commissioning of DG Set as per department procedure and shall be arranged by contractor.\n(b) Extenssion of exhaust pipe for DG set along with standerd accessories like flange, nut bolts , asbestous rope etc shall be provided by the contractor and the cost of the same shall be included in the unit rate quoted by contractor.\n(c) Cost of foundation and necessary civil works as per the manufacturer's recommendations/site requirement shall be incuded in the unit rate quoted by the contractor.\n\n |
AI Tender Summary
Tender Timeline
Mar 12, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Mar 19, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 19, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 20, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender