Construction Of Veterinary Hospital At Nasirabad , District-Raeabareli
Tender Value
30.74 Lakhs
Estimated cost
Bid Submission
10 Mar 2021
0 days left
EMD
62000
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
NASIRABAD → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Veterinary Hospital At Nasirabad , District-Raeabareli
BOQ
| Name of Work: Construction of Veterinary Hospital at Nasirabad Raebareli (U.P.) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | EXCAVATION in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches. | BI01010001010000000000000515BI0100001112 | 61 | Cum. |
| 2 | 1.02 | Filling of available excavated earth in trenches, plinth, sides of foundation etc. inlayers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50m & lift upto 1.50m. | BI01010001010000000000000515BI0100001113 | 61 | cum |
| 3 | 1.03 | SAND filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8.00Kms. From the site of work including watering, dressing etc. labour & T &P etc. required for proper completion of work saplings of girth upto 30 ground level and removal of rubbish upto a distsnce of 50m out side the periphery of area cleared. under floor course sand | BI01010001010000000000000515BI0100001114 | 11 | cum |
| 4 | 1.04 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. | BI01010001010000000000000515BI0100001115 | 15 | sqm |
| 5 | 1.05 | Providing & Laying D.P.C 2.5 cm. (1\") thick and of cement concrete consisting of one part cement 1½ parts approved coarse sand and 3 parts approved 13mm(1½) graded stone grit and including water proofing materials as ordered by the Engineer-in-charge in the proportion as specified by the manufacturers. | BI01010001010000000000000515BI0100001116 | 15 | sqm |
| 6 | 1.06 | Providing and laying Cement concrete 1:4:8 (1cement :4 course sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. | BI01010001010000000000000515BI0100001117 | 15 | Cum. |
| 7 | 1.07 | R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in plinth beams, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in plinth beams in 1:1.5:3 i.e. having spans upto 6 metres. | BI01010001010000000000000515BI0100001118 | 2.4 | cum |
| 8 | 1.08 | R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in lintels of doors and windows, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. | BI01010001010000000000000515BI0100001119 | 2.9 | Cum |
| 9 | 1.09 | R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in slab , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in slab in 1:1.5:3 | BI01010001010000000000000515BI0100001120 | 12.6 | cum |
| 10 | 1.1 | R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in beams, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in HEAVEIR beams in 1:1.5:3 i.e. having spans upto 6 metres. | BI01010001010000000000000515BI0100001121 | 0.18 | cum |
| 11 | 1.11 | TMT BAR in plain work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured | BI01010001010000000000000515BI0100001122 | 10.65 | qtl. |
| 12 | 1.12 | M-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and tools and plants etc required for proper completion of work. | BI01010001010000000000000515BI0100001123 | 30.3 | Cum. |
| 13 | 1.13 | M-150 brick work in 1:6 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks required and also including honey comb brick work thickness of walls more than one brick and for extra labour to above items | BI01010001010000000000000515BI0100001124 | 33 | Cum |
| 14 | 1.14 | Class 150 brick work in but in 1 : 4 cement & coarse sand mortar for wall thickness 12 cm. and below, upto two floors | BI01010001010000000000000515BI0100001125 | 2.2 | Cum |
| 15 | 1.15 | Proving & injecting chemical emulsion for preconstructional anti-termite treatment and creating a chemical barrier under & alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall & floor along the external perimeter of building expansion joints surrounding of pipes & coduits etc.complete plinth area of the building at ground floor only shall be measured as per I.S.63/3( part II 1981 ) Aldrine emlsifiable concentrate or any other approved material such as Htrachlore or Chlordance will be used . The rate of application of chemical emulsion shall be as follows: (I) Treatment for masonary & foundation 5litres/ sqm. (II) Back fill in immediate contract with foundation 7.5 litres / sqm. (III) Treatment of top surface of plinth filling 5 litres/sqm . (IV) Treatment of junction of wall and floor 7.5litres/sqm. (V) Treatment of soil along external perimeter of building 7.50 litres/sqm. (VI) Treatment of soil under Apron along external perimeter 5litres/sqm | BI01010001010000000000000515BI0100001126 | 75 | sqm |
| 16 | 1.16 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.\nFixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001127 | 136 | K.G. |
| 17 | 1.17 | Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but Fabrication of Z-Section fixed steel windows, including necessary steel fitting such as handles stay etc. | BI01010001010000000000000515BI0100001128 | 295 | K.G. |
| 18 | 1.18 | Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but Fabrication of Grill/Stairs case railing | BI01010001010000000000000515BI0100001129 | 115 | K.G. |
| 19 | 1.19 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes | BI01010001010000000000000515BI0100001130 | 19.8 | sqm |
| 20 | 1.2 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: | BI01010001010000000000000515BI0100001131 | 13.6 | sqm |
| 21 | 1.21 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary\nscrews etc. complete. | BI01010001010000000000000515BI0100001132 | 5 | NOS |
| 22 | 1.22 | Providing and fixing SS tower bolts ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm. | BI01010001010000000000000515BI0100001133 | 43 | NOS |
| 23 | 1.23 | Providing and fixing SS handles ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete :125 mm. | BI01010001010000000000000515BI0100001134 | 43 | NOS |
| 24 | 1.24 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | BI01010001010000000000000515BI0100001135 | 9.3 | sqm |
| 25 | 1.25 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,\nFume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. | BI01010001010000000000000515BI0100001136 | 2.4 | sqm |
| 26 | 1.26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001137 | 15.3 | sqm |
| 27 | 1.27 | Providing and fixing 25mm thick Kota stone of Size 45x45cm and above flooring over Previously Prepared base with 2cm thick 1:3 cement and sand mortar i/c filling of joints with cement mixed with Pigments requred for matching the shade of floor as per the direction of Engineer in charge i/c cutting polished with wax polish i/c supply of all materials labour and T&P. | BI01010001010000000000000515BI0100001138 | 16.7 | Sqm |
| 28 | 1.28 | Providing and laying vitrified floor tiles in different size (thickness to be specified by the manufactorer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make in all colour and shades, laid on 20mm thick cement mortat 1:4 (1cement : 4coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600X600mm | BI01010001010000000000000515BI0100001139 | 64 | SQM. |
| 29 | 1.29 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors.40 mm wide and 4 mm thick | BI01010001010000000000000515BI0100001140 | 54 | M |
| 30 | 1.3 | 12mm cement plaster in single coat on fair side of single or half brick wall for single or half brick wall for interior plastering upto floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished evenand smooth no. extra for mixing and additive. (iii) 1 cement: 6 Course sand | BI01010001010000000000000515BI0100001141 | 190 | sqm |
| 31 | 1.31 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (iii) 1 cement: 6 Course sand | BI01010001010000000000000515BI0100001142 | 182 | Sqm |
| 32 | 1.32 | Making drip course in sunshade or FACIA as per direction of Engineer-in-charge including supply of all materials labour etc. required proper completion of work. | BI01010001010000000000000515BI0100001143 | 2.8 | R.M. |
| 33 | 1.33 | 15 mm cement plaster of mix : 1:4 (1 cement: 4coarse sand) | BI01010001010000000000000515BI0100001144 | 21.8 | Sqm |
| 34 | 1.34 | Finishing walls with water proof cement paint of approved make and quality on new work with three coats to give an even shade. Including supply of all material labour and T & P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001145 | 155 | SQM. |
| 35 | 1.35 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shadeTwo or more coats on new work | BI01010001010000000000000515BI0100001146 | 323 | Sqm |
| 36 | 1.36 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | BI01010001010000000000000515BI0100001147 | 478 | Sqm |
| 37 | 1.37 | Providing and laying \"brick coba\" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound | BI01010001010000000000000515BI0100001148 | ||
| 38 | 1.38 | 1:4 cement and coarse sand mortar finfished smooth & top mashed false square 30 x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work. | BI01010001010000000000000515BI0100001149 | 90 | SQM |
| 39 | 1.39 | Making plinth protection 25mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. | BI01010001010000000000000515BI0100001150 | 21.8 | SQM |
| 40 | 1.4 | Construction of APRON DRAIN | BI01010001010000000000000515BI0100001151 | 35 | RM |
| 41 | 1.41 | WATER SUPPLY AND SANITARY | BI01010001010000000000000515BI0100001152 | ||
| 42 | 1.42 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | BI01010001010000000000000515BI0100001153 | 2 | Each |
| 43 | 1.43 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | BI01010001010000000000000515BI0100001154 | 2 | Each |
| 44 | 1.44 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm | BI01010001010000000000000515BI0100001155 | 1 | Each |
| 45 | 1.45 | Providing & fixing 32mm Dia PVC waste pipe for sink oncluding PVC waste fitting Complete Flexible Pipe | BI01010001010000000000000515BI0100001156 | 2 | Each |
| 46 | 1.46 | Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.(sink & urinal) | BI01010001010000000000000515BI0100001157 | 1 | Each |
| 47 | 1.47 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia | BI01010001010000000000000515BI0100001158 | 2 | Each |
| 48 | 1.48 | Providing and fixing soil, waste, vent pipes Centrifugally cast (spun) iron S&S pipe 100mm dia cast (spun) iron S&S pipe | BI01010001010000000000000515BI0100001159 | 10 | Rm |
| 49 | 1.49 | Providing and fixing 100mm dia MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. | BI01010001010000000000000515BI0100001160 | 2 | Each |
| 50 | 1.5 | Providing and fixing heel rest sanitary bend, in 100mm Centrifugally cast (spun) iron pipe S&S | BI01010001010000000000000515BI0100001161 | 2 | Each |
| 51 | 1.51 | Providing and fixing 100X100X100mm bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. | BI01010001010000000000000515BI0100001162 | 1 | Each |
| 52 | 1.52 | Providing and fixing Sand cast iron S&S as per IS : 3989 PLAIN JUNCTION of required degree | BI01010001010000000000000515BI0100001163 | 1 | Each |
| 53 | 1.53 | Providing and fixing 100mm terminal guard: Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001164 | 1 | Each |
| 54 | 1.54 | Providing and fixing 100mm collar. Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001165 | 1 | Each |
| 55 | 1.55 | Providing and lead 100 Dia caulked joint | BI01010001010000000000000515BI0100001166 | 12 | Each |
| 56 | 1.56 | Providing and fixing cast iron trap of self cleansing design with cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 100 mm inlet and 100 mm outlet,Sand cast iron S&S as per IS: 3989 | BI01010001010000000000000515BI0100001167 | 3 | Each |
| 57 | 1.57 | Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc. over a coat of primer (of approval quality) for new work. 100mm dia | BI01010001010000000000000515BI0100001168 | 10 | Rm |
| 58 | 1.58 | Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms | BI01010001010000000000000515BI0100001169 | 2 | Each |
| 59 | 1.59 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall | BI01010001010000000000000515BI0100001170 | ||
| 60 | 1.6 | 15 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001171 | 10 | Rm |
| 61 | 1.61 | 20 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001172 | 9 | Rm |
| 62 | 1.62 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall | BI01010001010000000000000515BI0100001173 | ||
| 63 | 1.63 | 15 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001174 | 10 | Rm |
| 64 | 1.64 | 20 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001175 | 5 | Rm |
| 65 | 1.65 | Providing and fixing 40 mm dia, nominal bore G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. External work | BI01010001010000000000000515BI0100001176 | 6 | Rm |
| 66 | 1.66 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) | BI01010001010000000000000515BI0100001177 | ||
| 67 | 1.67 | 25mm dia, nominal bore | BI01010001010000000000000515BI0100001178 | 2 | Each |
| 68 | 1.68 | 50 mm dia, nominal bore | BI01010001010000000000000515BI0100001179 | 1 | Each |
| 69 | 1.69 | Providing and fixing uplasticised 15 mm nominal bore PVC connection pipe with brass unions : 45 cm length | BI01010001010000000000000515BI0100001180 | 4 | Each |
| 70 | 1.7 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls) | BI01010001010000000000000515BI0100001181 | ||
| 71 | 1.71 | 15 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001182 | 10 | Rm |
| 72 | 1.72 | 20 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001183 | 6 | Rm |
| 73 | 1.73 | Painting 40 mm dia, nominal bore GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality | BI01010001010000000000000515BI0100001184 | 6 | Rm |
| 74 | 1.74 | Providing and filling 40 mm dia, nominal bore sand of grading zone V or coarser grade, allround the G.I. pipes in external work | BI01010001010000000000000515BI0100001185 | 6 | Rm |
| 75 | 1.75 | Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) | BI01010001010000000000000515BI0100001186 | ||
| 76 | 1.76 | 15mm nominal bore | BI01010001010000000000000515BI0100001187 | 2 | Each |
| 77 | 1.77 | 20mm nominal bore | BI01010001010000000000000515BI0100001188 | 2 | Each |
| 78 | 1.78 | Providing and fixing 15mm nominal bore C.P. brass bib cock of approved quality confirming to IS:8931 | BI01010001010000000000000515BI0100001189 | 2 | Each |
| 79 | 1.79 | Providing and fixing 15mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. | BI01010001010000000000000515BI0100001190 | 2 | Each |
| 80 | 1.8 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. | BI01010001010000000000000515BI0100001191 | 4 | Each |
| 81 | 1.81 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia | BI01010001010000000000000515BI0100001192 | 3 | Each |
| 82 | 1.82 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | BI01010001010000000000000515BI0100001193 | 500 | per litre |
| 83 | 1.83 | Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. | BI01010001010000000000000515BI0100001194 | 4 | meter |
| 84 | 1.84 | Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter | BI01010001010000000000000515BI0100001195 | 4 | meter |
| 85 | 1.85 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe | BI01010001010000000000000515BI0100001196 | 4 | meter |
| 86 | 1.86 | Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 100x100 mm size P type With F.P.S. Bricks class designation 75 | BI01010001010000000000000515BI0100001197 | 2 | each |
| 87 | 1.87 | SEPTIC TANK | BI01010001010000000000000515BI0100001198 | ||
| 88 | 1.88 | Earth work in excavation -Depth upto 1.50 Mtr. | BI01010001010000000000000515BI0100001199 | 9.6 | Cum |
| 89 | 1.89 | Earth work in excavation -Depth above 1.50 Mtr. | BI01010001010000000000000515BI0100001200 | 6 | Cum |
| 90 | 1.9 | P.C.C. in Foundation (1 :4 :8) | BI01010001010000000000000515BI0100001201 | 1 | Cum |
| 91 | 1.91 | 1st Class B/W in Septic tank (1cement : 6coarse sand) | BI01010001010000000000000515BI0100001202 | 8.5 | Cum |
| 92 | 1.92 | R.C.C. work in septic tank (M-15) | BI01010001010000000000000515BI0100001203 | 1.6 | Cum |
| 93 | 1.93 | M.S. work in R.C.C. | BI01010001010000000000000515BI0100001204 | 0.7 | qtl. |
| 94 | 1.94 | 12 mm thk Plastering inside septic tank1 cement : 6 coarse sand | BI01010001010000000000000515BI0100001205 | 38 | Sqm |
| 95 | 1.95 | Providing M.S. foot rest including fixing with 20 x 20 x 10 cm cement concete block 1:3:6 (1 cement : 3 coarse :6 graded aggregate of nominal size 20 mm ) as per standard with 20x20 mm sqm. bar. | BI01010001010000000000000515BI0100001206 | 8 | Nos |
| 96 | 1.96 | Providing & fixing 100 mm dia pvc pipe soil, wast and vent pipe. | BI01010001010000000000000515BI0100001207 | 2 | RM |
| 97 | 1.97 | Providing & fixing PVC Tee bend 100 mm dia. | BI01010001010000000000000515BI0100001208 | 2 | RM |
| 98 | 1.98 | Providing & fixing PVC Elbow bend 100mm | BI01010001010000000000000515BI0100001209 | 1 | RM |
| 99 | 1.99 | Providing & fixing 100 mm PVC Elbow bend with acsess door | BI01010001010000000000000515BI0100001210 | 1 | Nos |
| 100 | 2 | Supply & fixing of medium quality R.C.C. Manhole cover with frame complete.HD.-20-Circular shape ,560 int. dia. M.D.-10- square shape ,450 int. dia. | BI01010001010000000000000515BI0100001211 | 1 | Nos |
| 101 | 2.01 | Constructing circular soak pit 2.0m internal diameter and 2.5m effective depth including excavation, disposal of surplus earth, refilling it with coarse aggregate and RCC slab on to 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate) with Manhole cover | BI01010001010000000000000515BI0100001212 | 1 | Nos |
| 102 | 2.02 | SOAK PIT | BI01010001010000000000000515BI0100001213 | ||
| 103 | 2.03 | Earth work in excavation -Depth upto 1.50 Mtr. | BI01010001010000000000000515BI0100001214 | 10 | Cum |
| 104 | 2.04 | Earth work in excavation -Depth above 1.50 Mtr. | BI01010001010000000000000515BI0100001215 | 5.1 | Cum |
| 105 | 2.05 | P.C.C. in Foundation (1 :4 :8) | BI01010001010000000000000515BI0100001216 | 0.5 | Cum |
| 106 | 2.06 | 1st Class B/W in Foundation (1cement : 6coarse sand) | BI01010001010000000000000515BI0100001217 | 3.3 | Cum |
| 107 | 2.07 | R.C.C. work in 1:1.5:3 (M-15) | BI01010001010000000000000515BI0100001218 | 0.45 | Cum |
| 108 | 2.08 | M.S. work in R.C.C. | BI01010001010000000000000515BI0100001219 | 0.22 | qtl. |
| 109 | 2.09 | Providing & filling of O.B. brick bats, brick ballast25mm to 80mm size inside of upper layer in soak pit. | BI01010001010000000000000515BI0100001220 | 5.5 | Cum |
| 110 | 2.1 | ELECTRICAL WORK | BI01010001010000000000000515BI0100001221 | ||
| 111 | 2.11 | Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as Earth wire , piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backelite sheet etc.complete in all respect as directed including matching colour wash. | BI01010001010000000000000515BI0100001222 | 23 | each |
| 112 | 2.12 | Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as Earth wire, piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backelite sheet,etc.complete in all respect,as directed, including matching colour wash. | BI01010001010000000000000515BI0100001223 | 6 | each |
| 113 | 2.13 | Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in riggid steel conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting ,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as Earth wire,piano type switch & socket etc.complete in all respect,as directed, including matching colour wash. | BI01010001010000000000000515BI0100001224 | 5 | each |
| 114 | 2.14 | Wiring point for call bell with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting ,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as earth continuity wire GP box and piano type bell push switch or two pin socket etc.complete in all respect,as directed, including matching colour wash. | BI01010001010000000000000515BI0100001225 | 1 | each |
| 115 | 2.15 | Supply fixing & concealing of PVC conduit in the wall including cutting of brick laying of conduit & fixing it with MS hooks & then plastering.with cement, sand,mortar finished to the level,with matching colour wash including cost of proper thrading of conduit and providing necessary socket ,bend & chucknuts,as directed by engineer incharge with the supply of material labour and T&P required for proper completion of work. Size 20 mm dia 16SWG (2 mm)thick | BI01010001010000000000000515BI0100001226 | 10 | MTR |
| 116 | 2.16 | Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable,with 5 amp flush type switch and 3 pin socket on existing board ,complete with 1.5 sq mm FRLSH PVC insulated multistrand copper conductor cable as earth wire.etc.complete in all respect,as directed, including matching colour wash. | BI01010001010000000000000515BI0100001227 | 10 | each |
| 117 | 2.17 | Add for light /fan point with moduler type switch in place of piano type switch. | BI01010001010000000000000515BI0100001228 | 29 | each |
| 118 | 2.18 | Add for plug point with moduler type switch in place of piano type switch. | BI01010001010000000000000515BI0100001229 | 5 | each |
| 119 | 2.19 | Add for call bell point with moduler type switch in place of piano type switch. | BI01010001010000000000000515BI0100001230 | 1 | each |
| 120 | 2.2 | Supply & wiring of submains with 2 nos.1.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 1 no. 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including maching colour wash etc.complete in all respect. | BI01010001010000000000000515BI0100001231 | 30 | rmt |
| 121 | 2.21 | Supply & wiring of submains with 2 nos.2.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slabalong with the reinforcement before concreting, with 1 no. 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including maching colour wash etc.complete in all respect. | BI01010001010000000000000515BI0100001232 | 18 | rmt |
| 122 | 2.22 | Supply & wiring of submains with 4 nos. 6 sq.mm FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 2 no. 4 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire including maching colour wash etc.complete in all respect. | BI01010001010000000000000515BI0100001233 | 10 | rmt |
| 123 | 2.23 | Supply & fixing and making connection of 40 amp. 4P 30 mA ELCB/ RCCB of Din Rail mounting in complete in all respect as per direction and satisfaction to the Engineer in Charge. | BI01010001010000000000000515BI0100001234 | 1 | each |
| 124 | 2.24 | Supply & fixing of Batton/Angle holder including making connection etc. as required. | BI01010001010000000000000515BI0100001235 | 12 | each |
| 125 | 2.25 | Supply and fixing of recess/surface/pendent mounting round 6 to 8 W LED Down lighiter having powder coated die cast aluminium housing with heat shink,diffuser/reflector and driver set. Complete in all respect. CAT. - AAA | BI01010001010000000000000515BI0100001236 | 1 | each |
| 126 | 2.26 | Supply and fixing of LED Tube Light with batten suitable for up to 1x22 watt LED tube light Complete including tube etc on surface complete in all respect. CAT. - AAA | BI01010001010000000000000515BI0100001237 | 10 | each |
| 127 | 2.27 | Supply of ceilling fans with fan motor of A.C Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. (BEE 5 Star rated-1200 mm sweep) | BI01010001010000000000000515BI0100001238 | 10 | each |
| 128 | 2.28 | Supply and fixing of call bell of approved make on polished MDFEG / Teak ply board including making connections etc.complete in all respect. | BI01010001010000000000000515BI0100001239 | 1 | each |
| 129 | 2.29 | Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc.Followingsize 10 sq mm x 4 core | BI01010001010000000000000515BI0100001240 | 10 | rmt |
| 130 | 2.3 | Supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheaththed ,underground cable including rubber ring etc. complete in all respect. Thearmouring of the cable shall be properly connected with the earth as per direction of engineer -incharge.for cable size 10 sq mm x 4 core | BI01010001010000000000000515BI0100001241 | 2 | each |
| 131 | 2.31 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to cable leads for pvc insulated & armoured cable insulating with tape and making connection. complete in all respect as per direction of engineer -incharge. for cable size 10 sq mm | BI01010001010000000000000515BI0100001242 | 4 | each |
| 132 | 2.32 | Supply and fixing of 240 volts C Curve 6-32 amp SP miniature circuit breaker (10 K A ) in existing MCB, DB complete with connections as required. CAT A | BI01010001010000000000000515BI0100001243 | 12 | each |
| 133 | 2.33 | Supply and fixing of 240 volts C Curve 40 amp 4P miniature circuit breaker (10 K A ) in existing MCB, DB complete with connections as required. CAT A | BI01010001010000000000000515BI0100001244 | 1 | each |
| 134 | 2.34 | Supply and fixing of flush/surface mounting 6 ways TPN distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects. As directed by engineer incharge. CAT A (To Light & Power Control D.B.) | BI01010001010000000000000515BI0100001245 | 1 | each |
| 135 | 2.35 | Supply & Fixing of MCB blanking plate for DB. | BI01010001010000000000000515BI0100001246 | 2 | each |
| 136 | 2.36 | Supply and Fixing of Danger Board fabricated from 10 gauge M.S. Sheet as per I.E. Rules | BI01010001010000000000000515BI0100001247 | 1 | each |
| 137 | 2.37 | Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects. | BI01010001010000000000000515BI0100001248 | 10 | each |
| 138 | 2.38 | Supply and fixing of power plug with 20A/250V flush type Moduler switch and 5 Pin 20A/250V flush type universal Moduler socket in suitable Conceled MS Box including supply of all material, labour,T&P etc.required for proper completion of work. | BI01010001010000000000000515BI0100001249 | 9 | each |
| 139 | 2.39 | S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWG M.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. | BI01010001010000000000000515BI0100001250 | 10 | each |
| 140 | 2.4 | Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. | BI01010001010000000000000515BI0100001251 | 10 | each |
| 141 | 2.41 | 3 Module (100mmX75mm) | BI01010001010000000000000515BI0100001252 | 5 | each |
| 142 | 2.42 | 4 Module (125mmX75mm) | BI01010001010000000000000515BI0100001253 | 2 | each |
| 143 | 2.43 | 6 Module (200mmX75mm) | BI01010001010000000000000515BI0100001254 | 12 | each |
| 144 | 2.44 | 8 Module (125mmX125mm) | BI01010001010000000000000515BI0100001255 | 8 | each |
| 145 | 2.45 | Supply and fixing of Factory made 12 to 20 Watt LED Bulb fitting cool day light (65000 K temp.) suitable for Batton / Angle holder including making connection.Complete in all respect. | BI01010001010000000000000515BI0100001256 | 12 | each |
| 146 | 2.46 | Supply and fixing of AC 230mm Sweep 230 Volts, 50 Hz exhaust fan (Light Duty) with blades,cover etc. complete as required. | BI01010001010000000000000515BI0100001257 | 4 | each |
| 147 | 2.47 | CATTLE CRUSH | BI01010001010000000000000515BI0100001258 | ||
| 148 | 2.48 | EXCAVATION in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches. | BI01010001010000000000000515BI0100001259 | 46.8 | Cum. |
| 149 | 2.49 | Filling of available excavated earth in trenches, plinth, sides of foundation etc. inlayers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50m & lift upto 1.50m. | BI01010001010000000000000515BI0100001260 | 46.8 | cum |
| 150 | 2.5 | SAND filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8.00Kms. From the site of work including watering, dressing etc. labour & T &P etc. required for proper completion of work saplings of girth upto 30 ground level and removal of rubbish upto a distsnce of 50m out side the periphery of area cleared. under floor course sand | BI01010001010000000000000515BI0100001261 | 6.5 | cum |
| 151 | 2.51 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. | BI01010001010000000000000515BI0100001262 | 9.3 | sqm |
| 152 | 2.52 | As in item (360) above but 2.5 cm. (1\") thick and of cement concrete consisting of one part cement 1½ parts approved coarse sand and 3 parts approved 13mm(1½) graded stone grit and including water proofing materials as ordered by the Engineer-in-charge in the proportion as specified by the manufacturers. | BI01010001010000000000000515BI0100001263 | 9 | sqm |
| 153 | 2.53 | Providing and laying Cement concrete 1:4:8 (1cement :4 course sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. | BI01010001010000000000000515BI0100001264 | 8.5 | Cum. |
| 154 | 2.54 | R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in FOUNDATION Excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in RCC raft foundation and footing with 4cm gauge approved stone ballast 1:1.5:3 | BI01010001010000000000000515BI0100001265 | 1 | cum |
| 155 | 2.55 | R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in COL., excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in RCC column in 1:1.5:3 | BI01010001010000000000000515BI0100001266 | 1.6 | cum. |
| 156 | 2.56 | R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in plinth beams, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in plinth beams in 1:1.5:3 i.e. having spans upto 6 metres. | BI01010001010000000000000515BI0100001267 | 1.3 | cum |
| 157 | 2.57 | R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in lintels of doors and windows, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. | BI01010001010000000000000515BI0100001268 | 0.9 | Cum |
| 158 | 2.58 | R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in slab , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in slab in 1:1.5:3 | BI01010001010000000000000515BI0100001269 | 7.5 | cum |
| 159 | 2.59 | R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in beams, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in HEAVEIR beams in 1:1.5:3 i.e. having spans upto 6 metres. | BI01010001010000000000000515BI0100001270 | 0.5 | cum |
| 160 | 2.6 | TMT BAR in plain work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured | BI01010001010000000000000515BI0100001271 | 8 | qtl. |
| 161 | 2.61 | M-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and tools and plants etc required for proper completion of work. | BI01010001010000000000000515BI0100001272 | 18.8 | Cum. |
| 162 | 2.62 | M-150 brick work in 1:6 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks required and also including honey comb brick work thickness of walls more than one brick and for extra labour to above items | BI01010001010000000000000515BI0100001273 | 21.5 | Cum |
| 163 | 2.63 | Class 150 brick work in but in 1 : 4 cement & coarse sand mortar for wall thickness 12 cm. and below, upto two floors | BI01010001010000000000000515BI0100001274 | 1.1 | Cum |
| 164 | 2.64 | Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but Fabrication of Grill/Stairs case railing | BI01010001010000000000000515BI0100001275 | 25.5 | K.G. |
| 165 | 2.65 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone of size 20mm nominal size) laid in one layer finished with floating coat of neat cement (40mm thick floor) | BI01010001010000000000000515BI0100001276 | 68.1 | Sqm |
| 166 | 2.66 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors.40 mm wide and 4 mm thick | BI01010001010000000000000515BI0100001277 | 222 | M |
| 167 | 2.67 | 12mm cement plaster in single coat on fair side of single or half brick wall for single or half brick wall for interior plastering upto floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished evenand smooth no. extra for mixing and additive. (iii) 1 cement: 6 Course sand | BI01010001010000000000000515BI0100001278 | 123 | sqm |
| 168 | 2.68 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (iii) 1 cement: 6 Course sand | BI01010001010000000000000515BI0100001279 | 125 | Sqm |
| 169 | 2.69 | Making drip course in sunshade or FACIA as per direction of Engineer-in-charge including supply of all materials labour etc. required proper completion of work. | BI01010001010000000000000515BI0100001280 | 9.1 | R.M. |
| 170 | 2.7 | 15 mm cement plaster of mix : 1:4 (1 cement: 4coarse sand) | BI01010001010000000000000515BI0100001281 | 20.7 | Sqm |
| 171 | 2.71 | Finishing walls with water proof cement paint of approved make and quality on new work with three coats to give an even shade. Including supply of all material labour and T & P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001282 | 131 | SQM. |
| 172 | 2.72 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shadeTwo or more coats on new work | BI01010001010000000000000515BI0100001283 | 190 | Sqm |
| 173 | 2.73 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | BI01010001010000000000000515BI0100001284 | 325 | Sqm |
| 174 | 2.74 | Providing and laying \"brick coba\" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finfished smooth & top mashed false square 30 x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work. | BI01010001010000000000000515BI0100001285 | 50 | SQM |
| 175 | 2.75 | Making plinth protection 25mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. | BI01010001010000000000000515BI0100001286 | 20.5 | SQM |
| 176 | 2.76 | HAND PUMP | BI01010001010000000000000515BI0100001287 | ||
| 177 | 2.77 | Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested : | BI01010001010000000000000515BI0100001288 | 26 | M |
| 178 | 2.78 | Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality. | BI01010001010000000000000515BI0100001289 | 26 | M |
| 179 | 2.79 | Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. | BI01010001010000000000000515BI0100001290 | 26 | M |
| 180 | 2.8 | Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories. | BI01010001010000000000000515BI0100001291 | 1 | NOS |
| 181 | 2.81 | BOUNDARY WALL | BI01010001010000000000000515BI0100001292 | ||
| 182 | 2.82 | Earth work in trenches for foundation in oridinary soil incl. lift up to 1.5 m and lead upto50 m & dressing of dides & ramming the bottom & disposal of surplus earth as per direction of E/I | BI01010001010000000000000515BI0100001293 | 90 | cum |
| 183 | 2.83 | P.C.C. work with cement approved coarse sand and 40 mm gauge approved stone ballast in proportion of 1:4:8 incl. cost of form work in foundation & floor | BI01010001010000000000000515BI0100001294 | 14.5 | cum |
| 184 | 2.84 | M-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and tools and plants etc required for proper completion of work. | BI01010001010000000000000515BI0100001295 | 30 | cum |
| 185 | 2.85 | Class 150 Brick work laid in 1:6 (1Cement and6 coarse sand ) in superstrecture including cost of all material and T&P etc required for proper completion of work | BI01010001010000000000000515BI0100001296 | 30 | cum |
| 186 | 2.86 | R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in plinth beams in 1:1.5:3 i.e. having spans upto 6 metres. | BI01010001010000000000000515BI0100001297 | 7.2 | Cum |
| 187 | 2.87 | TMT BAR in plain work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured | BI01010001010000000000000515BI0100001298 | 4 | QTL |
| 188 | 2.88 | Providing & Laying D.P.C 2.5 cm. (1\") thick and of cement concrete consisting of one part cement 1½ parts approved coarse sand and 3 parts approved 13mm(1½) graded stone grit and including water proofing materials as ordered by the Engineer-in-charge in the proportion as specified by the manufacturers. | BI01010001010000000000000515BI0100001299 | 28 | Sqm |
| 189 | 2.89 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) | BI01010001010000000000000515BI0100001300 | 275 | sqm |
| 190 | 2.9 | 15 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) | BI01010001010000000000000515BI0100001301 | 245 | sqm |
| 191 | 2.91 | Finishing walls with water proof cement paint of approved make and quality on new work with three coats to give an even shade. Including supply of all material labour and T & P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001302 | 520 | sqm |
| 192 | 2.92 | MAIN GATE | BI01010001010000000000000515BI0100001303 | ||
| 193 | 2.93 | Earth work in trenches for foundation for pipes.cable etc in oridinary soil incl. lift up to 1.5 m and lead upto50 m & dressing of dides & ramming the bottom & disposal of surplus earth as per direction of E/I | BI01010001010000000000000515BI0100001304 | 2.5 | cum |
| 194 | 2.94 | Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. | BI01010001010000000000000515BI0100001305 | 0.4 | cum |
| 195 | 2.95 | R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in RCC raft foundation and footing, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. | BI01010001010000000000000515BI0100001306 | 0.6 | Cum |
| 196 | 2.96 | R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in COLUMN, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. | BI01010001010000000000000515BI0100001307 | 0.3 | Cum |
| 197 | 2.97 | Mild steel or iron in plan work such as reinforced concerte or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. | BI01010001010000000000000515BI0100001308 | 1.9 | QTL |
| 198 | 2.98 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | BI01010001010000000000000515BI0100001309 | 465 | kg. |
| 199 | 2.99 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work \n | BI01010001010000000000000515BI0100001310 | 14.4 | Sqm |
| 200 | 3 | PAVER BLOCK ROAD | BI01010001010000000000000515BI0100001311 | ||
| 201 | 3.01 | Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches. | BI01010001010000000000000515BI0100001312 | 3.3 | CUM |
| 202 | 3.02 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. | BI01010001010000000000000515BI0100001313 | 90 | SQM |
| 203 | 3.03 | Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). | BI01010001010000000000000515BI0100001314 | 27 | CUM |
| 204 | 3.04 | Class-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work. | BI01010001010000000000000515BI0100001315 | 1.9 | CUM |
| 205 | 3.05 | Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. | BI01010001010000000000000515BI0100001316 | 0.8 | CUM |
| 206 | 3.06 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by ippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per pecifications and directions of Engineerin- Charge With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 | BI01010001010000000000000515BI0100001317 | 8 | CUM |
| 207 | 3.07 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster | BI01010001010000000000000515BI0100001318 | 11 | SQM |
| 208 | 3.08 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. | BI01010001010000000000000515BI0100001319 | 55 | SQM |
| 209 | 3.09 | GST Extra as applicable | BI01010001010000000000000515BI0100001320 |
AI Tender Summary
Tender Timeline
Mar 04, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 10, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 10, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender