Islamic University Of Science And Technology has published Supply , Testing And Installation Of Laboratory Items In The Watson-Crick Centre For Molecular Medicine. Submission Date for this Tender is 10-03-2021. Medicine Tenders in IUST AWANTIPORA Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Mar-2021 | corrigendum regarding Bid Security/Earnest Money Deposit (EMD) | Other | 10-03-2021 |
| Name of Work: Supply, Testing and Installation of Laboratory Items in the Watson-Crick Centre for Molecular Medicine | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 2 | Bio-safety cabinet (4 FT) (Thermo-Fisher, Berner, and Eppendorf)\nClass II Bio-safety cabinet, type A2, open-front, ventilated cabinet in ergonomic design vertical type.\nSize: approx. 4 ft and Cabinet made of steels (work zone - stainless steel and side walls-electro galvanized steel) with antimicrobial coating\nShould have support stand (Adjustable height) with caster wheels for 4 ft cabinet\nULPA/HEPA-filtered, re-circulated mass airflow with in the\nwork space \nULPA/HEPA filter with minimum 99% efficiency against \n0.3µm particles.\nExhaust air from the cabinet should also filtered by HEPA filters\nMotor should be Dual DC & must automatically adjust the airflow speed (balancing inflow and down flow) without the use of a damper to ensure continuous safe working conditions.\nAverage air flow should be 90 ± 20 fpm\nUV light must be programmable to allow for specific exposure times from 0 to 24 hours. Lightening power should >1000 Lux (100fc); cabinet noise level must be less than 65 dB.\nLow noise (< 65 db), low energy consumption and heat output\nMicroprocessor controlled functions with LCD display\nAudible and visual alarms\nMachine should be Energy Efficient with Power Consumption in Normal mode: 250W ±15%\nElectric supply: 220-240V, AC, 50Hz\nEuropean CE/FDA and NSF/ANSI 49 certification\nTwo plugged cable ports, one on each side wall \n | item1 | 1 | Nos |
| 2 | 3 | Digital pH meter (Sartorius, Mettler Toledo, Fisher Scientific)\nShould have Working range from 0 to 14.\nResolution 0.1/0.01 pH.\nShould have RS.232C output and supply Data connector cable.\nAutomatic calibration facility.\nData storage facility and record maximum and minimum value.\n3 stage calibration.\nDigital display with 0.001 pH unit readability\nTri-combination pH/ATC electrode\nSupply Electrode + Standard buffer solution (pH 4.0, 7.0, 10.01 x 50ml for each bottle) + standard electrode holder +Ac /DC Adaptor.\nShould be provided with an electrode holder/arm with smooth movement\nTemperature compensation zero to 100 degree C with ATC\n | item2 | 1 | Nos |
| 3 | 4 | Automatic X-Ray Film Processor (Tarsons, Genetix and Thermo- Fisher, Himedia, Agilent)\nTable top processor with consistent, high-quality processing of films of up to 36 cms width.\nHigh-temperature, high-speed developing and fixing bath\nDeveloping tank 5 -6 liters, \nfixing tank 5-6 liters, \nwashing tank 5-6 liters, and \nreplenishment tank- 25liters\nDeveloping time: less than 1 mins\nWater Consumption of about 1-2 liters/min\nShould be supplied with 10-15 developing cassettes of standard size.\nPower Supply: AC220V, 50/60HZ\nEuropean CU Certified\n | item3 | 1 | Nos |
| 4 | 5 | CO2 Incubator (Thermo-Fisher, Berner, and Eppendorf)\nMicroprocessor controlled CO2 Incubator with work chamber volume approximately within range of 150-190 liters\nWater jacket CO2 incubators with corrosion-resistant and stainless steel chamber.\nCO2 range 0-20%, with ±0.1% accuracy\nTemperature range: ambient to 55°C with temp accuracy: ±0.1°C\nHUMIDITY: Ambient to 95% @ 37°C (98.6°F)\nSystem should have interactive control to access rapidly important information for each critical parameter in the incubator\nTemperature, CO2 and humidity recovery time should be very fast\nSystem should have built-in moist or dry heat decontamination (sterilization) facility to remove bacteria, fungi, spores, mycoplasma etc.\nAt least 3 nos. of stainless steel perforated shelves should be supplied\nInterior chamber should be made of stainless steel.\nUnit should have appropriate filter (HEPA etc.) \nInfrared (IR) CO2 Sensor (5 units); TCD sensor (10 units). Those 5 units equipped with IR based CO2 sensor should be able to adjust baseline automatically\nThe system should have large digital display for both Temp. & CO2 simultaneously.\nSystem should have at least two doors, one main door and one glass doors.\nIt should be ISO 9001 & CE Certification.\nSuitable for 230V, single phase 50 Hz operation.\n | item4 | 2 | Nos |
| 5 | 6 | UV Trans- illuminator (Tarsons, Genetix and Thermo Fisher, Himedia, Agilent)\nLight Source: 4 x 8 Watt UV bulbs\nWavelength:302nm midrange\nIntensity Control: Low (50%) or High (100%)\nViewing Surface: 14-16 x16-18cm\nExt. Dimensions: 10.5 x 13 x 5.5 in / 26.5 x 32.5 x 14 cm\nHinged UV safety cover\n | item5 | 1 | Nos |
| 6 | 7 | Dry Block Heaters\nAccurate temperature control from ambient\n+5ºC to 150ºC in 0.1ºC increments\nIntegral aluminium/stainless steel block to hold 12 x 1.5-2 ml tubes\nTemperature increments: 0.1°C\nTimer: 0 - 19 hours 59 minutes or continuous\nElectrical : 100 - 240V / 50-60 Hz\n | item6 | 1 | Nos |
| 7 | 8 | Hotplate Magnetic Stirrer (Tarsons, Genetix and Thermo Fisher, Himedia, Agilent)\nPower [W]:L 520-550\nMax. stirring quantity(H2O)[L]: 10-20\nMotor type: External rotor brushless motor\nMotor rating input [W]: 18\nMotor rating output [W]: 10\nSpeed range [rpm]: 0-1500\nDimension of Plate [mm]: f135\nHeating power [W]: 500\nHeat rate(1Lwater)[K/min]: 4-6\nHeating Temperature Range [0C]: 25-340\nDimension [mm]: 280×160×85\n | item7 | 1 | Nos |
| 8 | 9 | Water Bath (Tarsons, Genetix and Thermo Fisher, Himedia, Agilent)\nTemperature range: Ambient +2°C to 100°C\nAccuracy: ±1°C\nTIMER: 99 hours and 59 minutes in 1 minute increments, or for continuous operation\nHEATER: 1500 watts\nBath Capacity: 30 - 38 liters\nVoltage: 220 volt, 50 Hz\nRating Watts : 250-500\n | item8 | 1 | Nos |
| 9 | 10 | Ice Flaker Machine\nCapacity of Ice Flake : 30-60 Kg. \nStorage bin : ABS Plastic\nStorage Capacity (Kg.) >=10 Kg\nCooling Method : Air\nWorking temp. : below 30ºC\nWater Supply : 3/4 inch BSP\nFully Automatic microprocessor control\nCompact Design and low maintenance\nStainless Steel construction\nContinuous Ice Flakes Output, No cubes\nNoiseless operation with noise level : =60 dB \nCFC free compressor\nOverload protection and Full bin cutoff sensor\nLow water level detection\nWheels for easy mobility\nWarranty 24 months\nPower Supply : 220V/50Hz\n | item9 | 1 | Nos |
| 10 | 11 | Spinix Vortex. (Tarsons, Genetix and Thermo Fisher, Himedia, Agilent)\nVortex should have Speed control\n Vortex should have Spare CUP Attachment\n Vortex should have Spare One hand attachment\n Vortex should have Spare Microtube insert.\n | item10 | 1 | Nos |
| 11 | 12 | Phase Contrast Microscope for Tissue culture\n(Eppedndorff and Thermo Fisher, Himedia, Agilent) \nMicroscope should have Simple software and hardware installation\nShould have Manual mechanical stage\nshould not need to have Fluorescence channels\nShould have Monochrome or color camera option\nShould be Benchtop system and suitable for tissue culture hood\nMicroscope should not need darkroom\nShould have USB ports to transfer data\nShould have Cell analysis software\nShould have Networking capability\nShould fit into the Laminar Hood\nShould have Adjustable intensity LED Illumination\nOptics:\nShould have Epifluorescence, transmitted light (brightfield and Contrast methods \nShould have Objective turret with Objectives 4x-10x-20x-40x-60x-100X\nShould have Mechanical focus wheel with single knob for coarse and fine focus\nShould have Mechanical X/Y stage \n Should have LCD display with 18.5" articulated LCD color monitor 1920x1080 pixel resolution \n\n | item11 | 1 | Nos |
| 12 | 13 | 1.5 ml centrifuge (Eppedorff and Thermo Fisher, Himedia, Agilent)\nCentrifuge should have Rotor capacity of 48 × 1.5/2.0 mL, 12 × 5.0 mL \nCentrifuge should Max. speed 25,000 × g (16,220 rpm): \nCentrifuge should have Soft touch one-finger closure for ergonomic operation\nCentrifuge should have Temperature range from 11 °C to 40 °C \nCentrifuge should have Temp working function between ~ 23 °C to 4 °C \nCentrifuge should have programmed to shut-off after 1, 2,4 or 8 hours \nCentrifuge should have in built-in condensation drains to eliminate water accumulation\nCentrifuge should have an Automatic rotor recognition and imbalance detection for maximized operational safety\nCentrifuge s should have Max. capacity 48 × 1.5/2.0 mL \nCentrifuge s should have Acceleration time 15-20 s \nCentrifuge s should Deceleration time 15-20 s \nCentrifuge should have Large Display Large LCD \nCentrifuge should have Noise level < 52 db \nCentrifuge should have Power supply 115-230 V, 50?Hz \nMax. power 550 W consumption \nCentrifuge should have Dimensions31.9?× 54.0?× 25.4?cm?/ 12.6?× 21.3?× 10?in \nCentrifuge should have Weight w/o accessories30 kg?/?66.1 lb\nCentrifuge should have refrigerated Cooling \nCentrifuge should have Temperature control range \n | item12 | 1 | Nos |
| 13 | 14 | Microwave\nShould be energy efficient with 3-5-star power efficiency \nShould have 1-2-year warranty\n30L Capacity\nControl: Touch keypad (membrane) is sensitive to touch and easy to clean\nShould have capacity to store 20 programs \n | item13 | 1 | Nos |
| 14 | 15 | Rocky Max (Tarsons, Genetix and Thermo Fisher, Himedia, Agilent)\nSpeed 10-50 RPM\nTime can withhold speed 99 hr and 99 minutes\nPlatform Dimension 30 L X 30 B in (cm) \nMaximam Load 20 kg\nLoad AC, 230V, 50 Hz\n | item14 | 1 | Nos |
| 15 | 16 | RotoSpin disk (1.5 ml (Tarsons, Genetix and Thermo Fisher, Himedia, Agilent)\nDisk for 24 (1.5ml) Eppendorf tubes\nSpeed 10-100 RPM\nMust have 1-3 years warranty\nLoad AC, 230V, 50 Hz\nTime can withhold speed 99 hr and 99 minutes\nShould have LCD with touch down for control the speed\nShould work under between 4-30 degree\n | item15 | 1 | Nos |
| 16 | 17 | Agarose gel Electrophoresis Unit\n(Tarsons, Sigma and Thermo Fisher)\nGel Tank should have a volume of 400-500 ml and compatible homemade gels\nGel Tank should accommodate up to two or more gels per run.\nShould supply power Supply Adapters to connect the covered power leads of electrophoresis units to power supplies made by other companies\nShould supply gel Handcast System.\nThere should be at least 2-Handcast Stations\nPower supply should have constant voltage or current settings\nPower supply should have Built-in timer for walk-away gel electrophoresis\nPower supply should have 2-4 sets of output jacks that are compatible with most electrophoresis devices.\nTwo Boats (dams) large and small \nHandcast System should include: Gel Combs at least 2 each: 5, 10 and 15 well.\nSuitable for electric supply of 220-240V\nEuropean CE certification\nWarrant =1 year and from the date of installation and AMC per year after the expiry of standard warranty\n\n | item16 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
