National Hydrology Project (Sh: Construction Laboratory Under Nhp Above Sub Division Store In Sandhol Distt Mandi Hp.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Mar 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sandhol Distt Mandi HP → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
National Hydrology Project (SH: Construction laboratory under NHP above Sub Division Store in Sandhol Distt Mandi HP.
BOQ
| NAME OF WORK:- National Hydrology Project (SH: C/o laboratory under NHP above Sub Division Store in Sandhol Distt Mandi HP. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL WORKS | |||
| 2 | 1.01 | Brick work using common burnt clay building bricks Super-structure above plinth level upto floor two level (2nd Class Bricks).Cement Mortar 1:6 (1 Cement : 6 Sand) | 11.54 | Cum | |
| 3 | 2 | Half brick masonry in common burnt clay building bricks in :-Cement Mortar 1:4 (1 cement : 4 sand) 2ndClass Bricks including all leads and lifts | 13.7 | Sqm | |
| 4 | 3 | Providing and laying cement concrete 1:1.5:3 (1 cement:1.5 Sand:3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including cariage of material in all leads and lifts | |||
| 5 | 3.01 | Beams, cantilever, girders and lintels.Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor. | 2.48 | Cum | |
| 6 | 3.02 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like. | 5.65 | Cum | |
| 7 | 3.03 | Stair cases with sloping or stepped soffits. | 1.34 | Cum | |
| 8 | 3.04 | Columns,pillars,posts & struts upto floor two level.. | 0.7 | Cum | |
| 9 | 4 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: | |||
| 10 | 4.01 | Beams, cantilever, girders and lintels.Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor. | 17.03 | Sqm | |
| 11 | 4.02 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like. | 43.88 | Sqm | |
| 12 | 4.03 | Edges of slabs and breaks in floors and walls: Under 20 cm. wide. | 27 | Rmt | |
| 13 | 4.04 | Sloping or battering surfacesincluding folded plates:\n Where inclination to horizontal plane | 9.86 | Sqm | |
| 14 | 4.05 | in Columns, pillars, posts and struts : Square, rectangular or polygonal | 4.98 | Sqm | |
| 15 | 5 | Providing mild steel/Tor steel reinforcement for R.C.C. Work including bending, binding and placing in position complete upto floor two level :TOR Steel | 1220.4 | kg | |
| 16 | 6 | 15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. in cment mortar 1:4 inlcuding all leads and lifts | 67.01 | Sqm | |
| 17 | 7 | 20mm Cement plaster in two coats,backing coat 15mm and finishing coat 5mm thick on rough side of brick/stone masonry walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth. 1:4 cement plaster | 52.77 | Sqm | |
| 18 | 8 | 6mm Cement plaster to ceiling In Cement mortar 1:3(1 Cement:3 Sand) | 32.72 | Sqm | |
| 19 | 9 | Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres with:-\nwith cement mortor 1:6 (1cement : 6sand) for Ground Floor | 17.93 | Sqm | |
| 20 | 10 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete | 52.77 | Sqm | |
| 21 | 11 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface | 67.01 | Sqm | |
| 22 | 12 | Distempering with oil bound distemper on ceiling and/or\nsloping roofs. | 32.72 | Sqm | |
| 23 | 13 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | 21.38 | Sqm | |
| 24 | 14 | White glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3 sand) finished with flush pointing in white cement. | 25.5 | Sqm | |
| 25 | 15 | Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete. 25 mm thick in all leads and lifts | 5.34 | Sqm | |
| 26 | 16 | Providing and fixing anodized podwer coated aluminium work for doors, windows, ventilators and partions with extruded built up standard tublar and other sections of approved make conforming to IS 733 and IS 1285 anodized transparent or dyed to required shade according to IS-1868 (minimum anodic coating of grade AC (15) fixed with raw plugs and screws or fixing with clips or with expension hold fasteners I/c necessary filling up of gaps at junction, at top, bottom and sides with required PVC neroprene etc. aluminium section shall be smooth, rust free, straight miltered and jointed mechanically where ever required including cleat angle, aluminium snap beading for glazing, panneling CP brass stainless screws, long bolts 10mm dia on top and bottom tail of doors, complete for door frames pannelled and glazed, wire gauge shutters etc as per drgs in all leads in lifts. | 28.27 | Sqm | |
| 27 | 17 | Steel work welded in built up section,trusses and framed work,including cutting,hoisting fixing in position and applying a priming coat of red lead paint. | 2.09 | Kg | |
| 28 | 18 | sanitary Fittings:- | |||
| 29 | 19 | Providing and fixing to wall ceiling and floor galvanized mild steel tube , fitting and chamber making the good wall celing and floor Jindal make c class 20 mm nominal | 20 | Rmt | |
| 30 | 20 | Providing and fixing G.I. Unions SPW make 20 mm nominal | 5 | Nos. | |
| 31 | 21 | Provding PVC water storage tank of approved quality including fitting complete in all respect 1000 litres capacity in all leads and lifts Sintex make | 1 | Nos. | |
| 32 | 22 | Construction of 300x300x500mm in size for stop cock with G.I. Surface box 100x100x5mm with hindges cover fixed in cement concrete slab 1:2:4( 1 cement:2 Sand:4 graded stone 20 mm nominal size) cement concrete 75 mm thick foundation concrete 1:5:10 1:2:4( 1 cement:5 Sand:10 graded stone 40mm nominal size) and its inside plastering with | 2 | Nos. | |
| 33 | 23 | Providing and fixing sand cast /cast iron spun spigot and socked soil waste and ventilating pipe (joint to be measured and paid for separatly) | |||
| 34 | 23.01 | 75mm dia | 25 | rmt | |
| 35 | 23.02 | 110mm dia | 20 | rmt | |
| 36 | 24 | Provding and fixing MS hooks and clamps 50mm nominal size | 15 | no | |
| 37 | 25 | Providing and fixing sand cast iron/cast iron fittings and accessories plian bend 100mm nominal size | 4 | no | |
| 38 | 26 | Providing and fixing collar 100mm nominal size | 5 | no | |
| 39 | 27 | Providing and fixing cast iron cowl 100mm dia | 2 | no | |
| 40 | 28 | Providing leak caulked joint to sand cast iron and fitting i/c testing of the joint in all leads and lifts 50 mm dia | |||
| 41 | 28.01 | 100 mm dia | 2 | no | |
| 42 | 29 | Providing and fixing cast iron/PVC floor trap of silt cleaning designed with sand cast iron screws down or hindges grating with cast vent iron including the cost of citting and making good the same 75mm nominal size | 1 | no | |
| 43 | 30 | Providing and fixing vitreous china water closet squleating pan W.C. Pan size 580mm (Earthwork,bed concrete, foortest and trap to measure and paid separatly) CERA, HINDWARE make white | 1 | no | |
| 44 | 31 | Providing and fixing 100mm size P or S trap foe water closet squattingh pan including jointing the trap with pan and soil pipe cement mortar 1:1( 1 cement: 1 Sand) CERA make | 1 | no | |
| 45 | 32 | Providing and fixing in Cement mortar 1:3(1 cement : 3 Mortar) a pair of vitreous china 250mmx130mmx50mm footrest for long pattern squatting pan and water closet | 1 | no | |
| 46 | 33 | Providing and fixing 10 litres vitreous china low level flushing cistern with a pair of CI brackets or mild steel brackets complete with fitting such as lead valve less syphon 15mm nominal size brass ball valve with ploythene float , CP, Brass handle un ions and coupling for connection with inlet, outlet and overflow pipes 40mm dia CP flush bend including cutting holes in wall and conecting the flush bend with cistern ( overfloe pipe) to be measured and paid separatly etc. complete in all respect. Vitreos chine white | 1 | no | |
| 47 | 34 | Providing and fixing in position brass mosquito proof coupling for overflow pipe 25mm nominal dia( overflow pipe to be measured and paid separatly) | 1 | no | |
| 48 | 35 | Providing and fixing GI inlet connection for flush pipe with W.C pan | 1 | no | |
| 49 | 36 | Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS bracket painted white including cutting holes and making good the same but exluding fiitng flat back 550x400 mm | 1 | no | |
| 50 | 37 | Providing and fixing vitreous china Pedestal for wash basin complete resessed at the back for racaiption of pipe and fitting CERA with single hole for pillar tap with CI or MS Bracket painted white including cutting holes and making good the same but excluding fittng flat back | 1 | no | |
| 51 | 38 | Providng and fixing CP Brass chain 50cm long and rubber plug of following size for sink or wash basin 32 mm dia | 1 | no | |
| 52 | 39 | Providing and fixing CP brass waste pipe for wash basin or sink 32 mm dia | 2 | no | |
| 53 | 40 | Providing and fixing G.I. Union for wash basin or sink 32 mm dia | 2 | no | |
| 54 | 41 | Providing and fixing 100mm sand cast/ cast iron pipe grating for gully floor or Nahani trap | 2 | no | |
| 55 | 42 | Providing and fixing 800x450mm leveled edge mirror for superior glass marked on 6mm thick AC sheet or plywood sheet and fixed to wooden plug with CP brass screw and washer | 2 | no | |
| 56 | 43 | Providing and fixing CP Brass towel rail complete with CP Brass bracket fixed to wooden plug with CP brass crome pipe PCASSO Range | 2 | no | |
| 57 | 44 | Providing and fixing CP brass bib tap with capston head 15mm dia crome plate ARK -GARNET collection | 2 | no | |
| 58 | 45 | Providong and fixing concelaed stop cocks 15m dia crome plate ARK GARNET collection | 2 | no | |
| 59 | 46 | Providing and fixing PVC connection pipe with brass union 300 cm length 15mm nominal bore | 2 | no | |
| 60 | 47 | Providing and Brass Full way valve with wheel ZOLOTO make 15mm dia | 2 | no | |
| 61 | 48 | Construction of chamber in size 900x900x600mm deep including CI cover with frame light duty/ single seal pattern 200mm thick wall of brick masonary in cement mortar (1 cement: 5 Sand) | 2 | no | |
| 62 | 49 | Exacavation in drain and channels etc. In earthwork including dressing of sites levelling of bed and disposing the exacavated earth upto all leads and lifts | 18.4 | no | |
| 63 | 50 | P/F vitreosus china sink for lab | 1 | no | |
| 64 | 51 | P/F CP grating in floor trap | 2 | no | |
| 65 | 52 | P/F Capson head bib cock for lab sink | 2 | no | |
| 66 | 53 | Electrical Installations:- | |||
| 67 | 54 | Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group \"C\" | 14 | Nos. | |
| 68 | 55 | Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. | 11 | Nos. | |
| 69 | 55.01 | Supplying & Fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:- | |||
| 70 | 55.02 | 4 modules (140mmx78mmx50mm) | 5 | Nos. | |
| 71 | 55.03 | 6 modules (205mmx78mmx50mm) | 4 | Nos. | |
| 72 | 56 | 8 modules (120mmx135mmx60mm) | 2 | Nos. | |
| 73 | 56.01 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. | |||
| 74 | 56.02 | 2 x 1.50 Sq. mm. | 31 | Meters | |
| 75 | 56.03 | 2 x 2.50 Sq. mm. | 17 | Meters | |
| 76 | 57 | 2 x 4.00 Sq. mm. | 22 | Meters | |
| 77 | 58 | Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. | 17 | Meters | |
| 78 | 59 | Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. | 10 | Meters | |
| 79 | 59.01 | Supplying and Fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. | |||
| 80 | 59.02 | S.P. 5/ 6 Amps one way Modular switch. | 9 | Nos. | |
| 81 | 59.03 | 5 pin, 5/ 6 Amps Modular socket outlet. | 9 | Nos. | |
| 82 | 60 | Bell push, Modular. | 1 | Nos. | |
| 83 | 60.01 | Supplying and Fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. | |||
| 84 | 60.02 | S.P. 15/ 16 Amps one way Modular switch. | 5 | Nos. | |
| 85 | 70 | 6 pin,15/16 Amps Modular socket outlet. | 5 | Nos. | |
| 86 | 70.01 | Supplying and Fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. | |||
| 87 | 71 | Telephone socket outlet, Modular. | 1 | No. | |
| 88 | 72 | Supplying and Fixing ceiling rose on the existing junction box / wooden block including connections etc. as required. | 18 | Nos. | |
| 89 | 72.01 | Supplying and Fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- | |||
| 90 | 73 | Double door-12 way | 1 | Nos. | |
| 91 | 73.01 | Supplying and Fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. | |||
| 92 | 74 | 63 Amps. Cat-A. | 1 | Nos. | |
| 93 | 75 | Supplying and Fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450 mm & cross-sectional area (25.4 mm x 4.75 mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530 mm x 450 mm x 150 mm) nominal with all accessories including connections, earthing the body etc. as required. | 2 | Nos. | |
| 94 | 75.01 | Providing and Fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required. | |||
| 95 | 76 | 100 Amp. Category-A | 2 | Nos. | |
| 96 | 76.01 | Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required. | |||
| 97 | 77 | Single pole & neutral. Cat-B. | 5 | Nos. | |
| 98 | 78 | Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 35 mm x 35 mm x 6 mm thick duly welded complete with 2.80mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required. | 1 | Sqm | |
| 99 | 78.01 | Supplying and Fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. | |||
| 100 | 79 | 40 Amps. Cat-B. | 1 | No. | |
| 101 | 80 | Supplying and Fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required. | 8 | Nos. | |
| 102 | 81 | Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required. | 1 | Set | |
| 103 | 82 | Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required. | 1 | Set | |
| 104 | 83 | Providing and Fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required. | 1 | No. | |
| 105 | 83.01 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and Fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required. | |||
| 106 | 83.02 | 25 Liter capacity water heater (Cat-A) | 1 | Nos. | |
| 107 | 84 | 10 Liter capacity water heater (Cat-A) | 1 | Nos. | |
| 108 | 84.01 | Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and Fixing phenolic laminated sheet cover on the fan box and earthing etc. as required. | |||
| 109 | 85 | Ceiling Fan 1400 mm sweep, Category-A | 3 | Nos. | |
| 110 | 85.01 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required. | |||
| 111 | 86 | Exhaust Fan, Light duty, (Domestic) 225 mm sweep | 3 | Nos. | |
| 112 | 87 | Providing and Fixing of Syska make LED Tube Fixture 18 watt complete in all respect in all leads and lifts. | 7 | Nos. | |
| 113 | 88 | Supplying and Fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:- | 2 | Nos. | |
| 114 | 89 | Supplying and Fixing bakelite batten/angle holder including connections etc. as required. | 20 | Nos. |
AI Tender Summary
Tender Timeline
Jan 01, 1900
11:30 IST
Tender Published
Tender notice published.
CompletedMar 19, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 19, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender