Supply Of Steel Tube Donnage Of Dimension 40 Inches Width X 48 Inches Depth X 6 Inches Height. Donnagesteel Tube Donnage Of Dimension 40 Inches Width X 48 Inches Depth X 6 Inches Height. Donnage Type : Flat Type Donnage Should Be Non Stackable. Donnage Co-Andhra Pradesh

Supply Of Steel Tube Donnage Of Dimension 40 Inches Width X 48 Inches Depth X 6 Inches Height. Donnagesteel Tube Donnage Of Dimension 40 Inches Width X 48 Inches Depth X 6 Inches Height. Donnage Type : Flat Type Donnage Should Be Non Stackable. Donnage Construction :A. Load Carrying Capacity Should Be 1800 Kgs Udl. B. Metal Tube Shall Be Welded On The Base Frame Structure. C. The Base Frame Structure And Runner Of Donnage Constructed With Tubes Of Section 2 Inch X 1 Inch Minimum. D. The Fork Lift Entry Will Be Allowed Only From Two Opposite Sides Of The Donnage. E. Ms Square Pipe 1 Inches X 2 Inches Of 2.2 Mm Thickness With Spray Painting. F. Steel Tube Donnage Of 1800 Kgs Load Capacity Makes Offered Jse Or Similar Consignee Dy.Cmm / Crs / Tpty Andhra Pradesh 25.00 Numbers 3. T And C F.O.R Description Destination Delivery Period Description Delivery / Completion Rate Of Supply For All Items Commencement : Within 1 Days Of Issue Of Contract, Completion : --- Within 30 Days Thereafter Page 1 Of 4 Run Date / Time: 04 / 03 / 2021 18:22:21Crs / Tpty / South Central Rly Tender Document Tender No Ln215100 Closing Date / Time 08 / 03 / 2021 14:30 Payment Terms S.No Description Payment Terms 1 100% Payment Against Receipt, Inspection And Acceptance Of Material By The Consignee At Destination. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State / Central Governments In Respect Of The Items Stipulated In The Contract ( And Not The Raw Materials Thereof ) , Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax / Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His Offer The Rate Of Tax / Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier / Contractor. Option Clause S.No Description 1 Not To Be Included Railway Standard Fall Clause S.No Description 1 Not To Be Included Standard Governing Conditions S.No Description 1 Irs Conditions Of Contract: The Contract Shall Be Governed By Latest Version ( Along With All Correction Slips ) Of Irs Conditions Of Contract, And All Other Terms And Conditions Incorporated In The Tender Documents. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 A ] Railways Reserves The Rights To Place The Order For Entire / Bulk Qty On No No Allowed Firms, Who Are Having The Performance For The Tender Item For Which Firms ( Optional ) Should Enclosed R-Notes + Pos + Ic Copies Etc Issued By Railways / Pu%U2019s To Substantiate Their Claim. B ] Offers Received Without Performance Will Not Be Considered For Placement Of Any Order. 5. Compliance Conditions Commercial-Compliance S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 Allowed Yes Yes Allowed ( Optional ) 2 Please Enter The Percentage Of Local Content In The Material Being Offered. No Yes Not Allowed Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Definition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions Page 2 Of 4 Run Date / Time: 04 / 03 / 2021 18:22:21Crs / Tpty / South Central Rly Tender Document Tender No Ln215100 Closing Date / Time 08 / 03 / 2021 14:30 S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 T H E O E M / Authorized Dealers / Agents M U S T C Om Ply T H E Following No No Not Allowed Conditions: I ) In A Tender, Either The Authorized Agent / Dealer On Behalf Of The Principal / Oem Or The Principal / Oem Itself Can Bid But Both Cannot Bid Simultaneously For The Same Item In The Same Tender. Ii ) If An Authorized Agent / Dealer Submits Bid O N Behalf O F T H E Principal / O Em , T H E Same Agent / Dealer Shall Not Submit A Bid On Behalf Of Another Principal / Oem In Same Tender For The Same Item / Product. 2 1 ) Gd Terms: Where Risk Purchase Is Not Tenable Or Could Not Be Made No No Not Allowed 10Percent General Damages May Be Imposed While Rescinding The Contract.2 ) . Warranty Clause: As Per Irs Conditions Of The Contract. 3 ) Jurisdiction Of Courts: The Chittoor ( Dist ) A.P Only Shall Have Exclusive Jurisdiction Over Any Disputes Arising Out In Respect Of The Contract. 4 ) Laws Governing The Contract A ) This Contract Shall Be Governed By The Laws Of India For The Time Being Force. B ) Irrespective Of The Place O F Deliver, The Place Of Performance Or Place Of Payment Under The Contracts, The Contracts Shall Be Deemed To Have Been Made At The Place From Which The Acceptance Tender Has Been Issued. 3 ( 1 ) All The Bidders Shall Quote The Basic Rate, Taxes, Freight, Packing And No No Not Allowed Other Charges Separately. If Firm Quotes The All-Inclusive Rate, Pl. Mentionthe Breakup Of Taxes And Other Charges. ( 2 ) Offers With For Destination By Road Only Will Be Considered. ( 3 ) Gst Act And Rules Are Applicable From Time To Time Is Applicable. ( 4 ) After Opening The Tenders If The Purchase Value Is Exceeding 5 Lakhs The Inspection Will Be Automatically Carried Out By Third Party I.E. By Rites / Rdso, If The Value Is Less Than5lakhs It Will Be Carried Out By Consignee May Please Be Noted. ( 5 ) In Case Delays In Contractual Delivery, Full L.D. Will Be Levied As Per Irs Conditions Of Contract And Being A Contractual Provision, No Request For Ld Waivel Will Be Considered. ( 6 ) Ready Stock / Early Possible Delivery Date Preferably15 / 30 Days Quoted By Firms Will Be Considered. ( 7 ) Validity Of The Offer Should Be 90 Days. ( 8 ) Hsn No. May Be Indicated For The Item While Participating In The Tender. ( 9 ) Onus Of Correct Clarification And Rate Is On The Firm. ( 10 ) Gst Will Be Paid On Production Of Documentary Proof. ( 11 ) The Firm Shall Pass On ( As Per Section 17 ( 1 ) Of Cgst / Sgst Act ) Any Reduction In Tax Rate On Supply Of Goods Or Any Benefit Of Input Tax Credit To The Railway Through A Commensurate Reduction In Price Without Any Undue Delay. To The Above Effect The Firm Should Give Declaration That All The Benefits Accruing On Account Of Change In Tax Rate And Any Additional Input Tax Credit ( Itc Benefit ) Shall Be Passed On To The Railway. ( 12 ) Any Kind Of Reduction In Prices Obtained By The Supplier Due To Implementation Of Gst Is To Be Passed On To The Purchaser As Per Anti-Profiteering G Clauses Of Gst Act At Any Point Of Time During The Period Of The Contract 4 A ] Railway Reserves The Right T O Impose The 1 0 % Percent O F General No No Not Allowed Damages For The Value Of Contract Other Conditions S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 Inspection By Consignee . No No Not Allowed 2 1 . Material T O B E Door Delivered T O Carriage Repair Shop / Stores Depot No No Not Allowed , Settipalli ( Po ) , Renigunta Road , Tirupati -517506 . 2. For Em D & Sd Conditions Refer T O Point 13.0 A N D 14.2 I N I T C Conditions Which Was Uploaded. 3 This Item Is Not Available In Gem. As Per Gem Availability Report Vide Report No No Allowed Id No : Gem / Garpts / 03032021 / Fmlnszk57dil ( Optional ) Page 3 Of 4 Run Date / Time: 04 / 03 / 2021 18:22:21Crs / Tpty / South Central Rly Tender Document Tender No Ln215100 Closing Date / Time 08 / 03 / 2021 14:30 4 Qty Tolerance Clause Plus Or Minus ( + / - ) 5 % Qty Tolerance No No Not Allowed Is Not Applicable Being A Non-Stock Purchase Special Conditions S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 Earnest Money Deposit ( Emd ) For Stores Tenders : A ) All Bidders Shall Be No No Not Allowed Exempted From Submission Of Emd In All Tenders Except Those Disqualified From Such Exemption Vide Annexure-A. B ) Wherever , There Are Compelling Circumstances To Ask For Earnest Money Deposit / Bid Security , The Same Will Be Added In The Tender As Special Condition. C ) Wherever The Bidder Is Disqualified For The Exemption Of Emd Vide Above, Emd Conditions Will Prevail. Technical-Compliances S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 Allowed Yes Yes Allowed ( Optional ) 6. Documents Attached With Tender S.No. Document Name Document Description 1 1540609.Pdf General Tender Conditions 2 1540618.Pdf Annexure-A Form 3 2053983.Pdf Instructions To The Tenderers 7. Responsiveness S.No. Description 1 Payment Terms: No Deviation From The Payment Terms Stipulated In The Tender Is Permitted. 2 Price Variation Clause: No Deviation From The Price Variation Clause Stipulated In The Tender Is Permitted. 3 Delivery Period: No Deviation From The Delivery Period Stipulated In The Tender Is Permitted. This Tender Complies With Public Procurement Policy ( Make In India ) Order 2017, Dated 15 / 06 / 2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015 / Rs ( G ) / 779 / 5 Dated 03 / 08 / 2017 And 27 / 12 / 2017 And Amendments / Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm55 ( Ramanjaneya . ) , Steel Tube Donnage Of Dimension 40 Inches Width X 48 Inches Depth X 6 Inches Height. Donnage Type : Flat Type Donnage Should Be Non Stackable. Donnage Construction :A. Load Carrying Capacity Should Be 1800 Kgs Udl. B. Metal Tube Shall Be Welded On The Base Frame Structure. C. The Base Frame Structure And Runner Of Donnage Constructed With Tubes Of Section 2 Inch X 1 Inch Minimum. D. The Fork Lift Entry Will Be Allowed Only From Two Opposite Sides Of The Donnage. E. Ms Square Pipe 1 Inches X 2 Inches Of 2.2 Mm Thickness With Spray Painting. F. Steel Tube Donnage Of 1800 Kgs Load Capacity Makes Offered Jse Or Similar

Refer document

Refer document

Refer document