Fabrication , And Installation Of D 15 Escape Gate At Rd 7650 To Provide Water In Dcb Installed At Arnia
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Mar 2021
0 days left
EMD
4000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Arnia → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Fabrication , And Installation Of D 15 Escape Gate At Rd 7650 To Provide Water In Dcb Installed At Arnia
BOQ
| Name of Work:fabrication, and installation of D 15 Escape gate at RD 7650 to provide water in DCB installed at Arnia. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Fabrication of gate- I on D15 Escape gate at RD 7650 to provide water in Defence ditch at International Border ( 3 ft x 3 ft), to be installed at Arnia, by way of dismantling of damaged old gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged/worn out gate leaf structure with the help of manual labour using tools and tackles, chain pulley block and tripod/hydra crane after removing accumulated mud/silt around the gate leaf. Carriage of gate structure along with winch machine and stem rod to the road with the help of manual labour using tools and tackles. Loading in mechanical transport and then carriage to workshop.Fabrication of leaf structure of size 3 ft x 3 ft (approx) using the ISMC 75channel size with vertical &horizontal cross members for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of4/5mm thickness on the frame of channel structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps.Providing, fabrication and fitting of 1 no. stem rod MS bar of length 6 ft approx and thenturning, threading, finishing to the original size.Fabrication, providing & fitting of 02 Ton capacity manually operated, worm gear type winch machine along with base plate of 8mm thickness.Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod/crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with two coats of red oxide primer and superior quality enamel paint ( Asian paints/ Kansai Nerolac paints/ Berger paints). Complete job includes cost of material, transportation charge, labour charges and testing for its smooth operation at site, cost of sand bags for stopping the flow of water in escape channel during the period of execution of work.\nNote:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.\n | 1 | Job | |
| 2 | 2 | Fabrication of gate-II against the flow of water on D15 Escape gate at RD 7650 to provide water in Defence ditch at Border ( 3 ft x 3 ft), to be installed at Arnia, by way of fabrication of outer structure of gate using ISMC 100 channel, the gate structure must consists of two side channels for up and down movement of gate, the bottom sil beam and two channels on top for holding winch machine at the top. The fabricated structure must be welded with double layered welding. Then outer structure of the gate have to be fitted in walls of the escape canal with cement and concrete mixture minimum ratio of 1:3:6. Allowing the civil works to completely dry and curing the concrete area for 5 days. \nFabrication of leaf structure of size 3 ft x 3 ft (approx) using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of4/5 mm thickness on the frame of channel structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps. Providing, fabrication and fitting of 1 no. stem rod MS bar of length 6 ft approx and then turning, threading, finishing to the original size. Fabrication, providing & fitting of 02 Ton capacity manually operated, worm gear type winch machine along with base plate of 8 mm thickness. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod/crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with two coats of red oxide primer and superior quality enamel paint ( Asian paints/ Kansai Nerolac paints/ Berger paints). Complete job includes cost of material, transportation charge, labour charges and testing for its smooth operation at site, cost of sand bags for stopping the flow of water in escape channel during the period of execution of work. \nNote:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.\n | 1 | Job | |
| 3 | 3 | Rebate on Old Parts | 1 | Job |
AI Tender Summary
Tender Timeline
Mar 04, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 12, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 13, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender