Public Works Department-PWD has published Construction Of 50 . 00 Mtrs Span Psc Box Girder Bridge Over Baner Khad On Link Road From Naura To Thanpuri At Rd 1/375 In Distt Kangra ( Hp ) ( Sh-Construction Of Bridge Work Alongwith Both Side Approaches ) . Submission Date for this Tender is 15-03-2021. Road Work Tenders in Tanda Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of 50.00 mtrs span PSC Box Girder bridge over Baner Khad on link road from Naura to Thanpuri at RD 1/375 in Distt. Kangra (Himachal Pradesh).(SH:-Construction of bridge work alongwith both side approaches.) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation for all type of bridge structure in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and MORTH technical specification Section 300 and as per direction of the Engineer-in-charge including setting out, shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lift including dressing of sides and bottom and back filling in trenches with excavated suitable/approved material to the original surface in layers not exceeding 150mm (One hundred fifty milimetres) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantam of water including cleaning of slush which may arrise out during dewatering as directed by the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 2788.8 | Per cubic meter | |
| 2 | 2 | Providing and laying mechanically mixed and vibrated concrete for plain/reinforced cement concrete in open foundation for all type of structure complete of plain cement concrete grade M-10 (M-ten) nominal mix 1: 3: 6 ( one cement: three sand : six graded crushed stone aggregate 40mm (forty millimeters) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work complete in all respect as per drawing and MORTH technical specification Section 1500, 1700 and 2100 as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 25.25 | Per cubic metre | |
| 3 | 3 | Providing and laying mechanically mixed and vibrated reinforced cement concrete in sub structure as per drawing and MORTH technical specifications Section 1500, 1700 and 2100 graded crushed stone aggregate 20mm (twenty milimeters) nominal size mix design to obtain the minimum compressive strength of grade M-30 (Thirty) with minimum cement contents not less than 407 Kgs (Four hundred seven kilograms) per cubic metre and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in abutment etcetera upto any height complete as per drawings and MoRTH technical specifications and as per directions of Engineer-in-charge. including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 542.94 | Per cubic metre | |
| 4 | 4 | Providing and laying mechanically mixed and vibrated plain/reinforced concrete M-20 (M-Twenty) designed mix with minimum cement contents not less than 344 Kgs (Three hundred forty four kilograms) per cubic metres with 20mm (Twenty millimeters) nomonal size crushed/broken stone aggregate in sub-structure as per drawings and MoRTH technical specification Section 2200 and curing complete including cost of form work but excluding cost of reinforcement including hauling of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 49.5 | Per cubic metre | |
| 5 | 5 | Supplying fitting and placing HYSD bar reinforcement for bridge work in sub structure complete as per drawing and MORTH technical specifications section 1600 and 2200 including cutting, bending, binding, straightening and placing in position complete in all respect including cost of binding wire upto any height as per the directions of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 84.7 | Per tonne | |
| 6 | 6 | Back filling with granular material behind abutments, wing walls, return wallscomplete as per drawing and MoRTH technical specifications Section 2200 and cluase 701.1.4 of IRC 78 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 100.91 | Per cubic metre | |
| 7 | 7 | Providing weep holes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100mm (One hundred milimetres) diametres AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards draining face complete as per drawing and MoRTH technical specification Section 2700 including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 50 | Each | |
| 8 | 8 | Providing and laying filter media with granular material crushed stone aggregate as per specification to a thickness of not less than 600mm (Six hundred millimetre) with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing walls return walls to the full height compacted to a firm condition complete as per drawing and MORTH technical specifications Section 2200 and clause 710.1.4 of IRC-78 and as per the directions of the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. | 371.74 | Per cubic metre | |
| 9 | 9 | Supplying, fitting and fixing in position true to line and level POT and POT cum PTFE consisting of a metal piston supported by a disc or un-reinforced elastomer confined within a metal cylinder, sealing rings, dust seals PTFE surface sliding against stainless steel mating surface complete assembly to be cast steel/fabricated structural steel metal and elastomer elements confirming to IRC : 83 Part-I & II and section 2000 of MORTH technical specifications and as per direction of Engineer-in-charge including carriage of materials, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 840 | Per tonne capacity | |
| 10 | 10 | Providing and laying mechanically mixed and vibrated reinforced cement concrete with graded crushed stone aggregate 20mm (twenty millimetre) nominal size mix design to obtain the minimum compressive strength of grade M-35 (thirty five) with minimum cement contents not less than 422 Kgs (Four hundred twenty two kilograms) per cubic metre in sub structure as per drawings and MORTH technical specification Section 1500, 1700 and 2200 upto any height including the cost of form work, curing complete, but excluding the cost of reinforcement including hauling of materials in all kinds of leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-charge. The rate is including octroi, royality, Malkana, tolltax, GST or any other taxes imposed by the Government. | 1.08 | Per cubic metre | |
| 11 | 11 | Finishing and placing reinforced/ prestressed cement concrete in super structure as per drawings & MoRTH technical specifications grade mix design to obtain minimum compresive strength of grade M-35 (M-Thirty five) with minimum cement contents not less than 422 Kgs (Four hundred twenty two kilograms) per cubic metre using crushed stone aggregate of 20mm (Twenty millimetres) nominal size and curing complete including the cost of formwork but excluding the cost of reinforcement in all heights complete as per MORTH technical specifications Section 1500, 1700 and 2300 complete as per the directions of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 210.92 | Per cubic metre | |
| 12 | 12 | Providing and laying High Tensile steel wires/strands USHA Martin make including all accessories for stressing, stressing operations and grouting complete as per drawing and MORTH technical specifications section 1800 and as per the directions of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 6.59 | Per tonne | |
| 13 | 13 | Supplying fitting and placing HYSD bar reinforcement for bridge work in super structure complete as per drawing and MORTH technical specifications Section 1600 and 2300 including cutting, bending, binding straightening and placing in position complete in all respect including cost of binding wire upto any height as per the directions of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 19 | Per tonne | |
| 14 | 14 | Providing and laying mechanical mixed and vibrated plain cement concrete in M-15 (M-Fifteen) nominal mix crushed/broken stone aggregate 40mm (Forty millimetres) nominal size levelling course below approach slab complete including cost of form work and curing complete as per drawing and MORTH technical specifications Section 1700 and 2700 and directions of the Engineer-Incharge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 7.18 | Per cubic metre | |
| 15 | 15 | Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-Thirty) mix designed with minimum cement contents not less than 407 Kgs (Four hundred seven kilograms) per cubic metre with 20mm(Twenty milimetres) nominal size graded crushed stone aggregate as per drawings and MORTH technical specifications Section 1500, 1600, 1700 and 2700 including cost of form work and reinforcement for reinforced concrete work in approach slab and curing complete, as per the directions of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. | 14.35 | Per cubic metre | |
| 16 | 16 | Providing and laying 50mm (Fifty milimetres) thick mastic asphalt wearing course on topof deck slab using paving grade bitumen VG-30 (Viscosity grade-thirty) meeting the reinforcement given in table 500-29 including roughening of surface with eire brush, cleaning the surface, applying a thin bitumenous tack coat of VG-30 (Viscosity grade-thirty) bitumen at the rate of 0.325 Kg (Zero point thre two five kilogram) per square metre after applying tack coat fixing cheken mesh reinforcement of 1.50mm (One point five zero millimetres) dia steel wire with hexagonal or rectangular opening of 20-25mm (Twenty to Twenty five millimetres) before pouring mastic asphalt prepared using mastic cooker for heating coarse aggregate, filler and bitumen as per section 500 of Morth specification, laid to required level and slope including providing antiskid surface with a layer of hard stone aggregate 13.2mm (Thirteen point two millimetres) of 9.50mm (Nine point fifty millimetres) nominal size as per the directions of the Engineer-in-charge precoated with VG-30 (Viscosity grade-thirty) grade bitumen applied at the rate of 0.005 cum (Zero point zero zero five cubic metre) per 10 sqm (Ten sqaue metre) and rolled or pressed into surface at approximate spacing of 10cm (ten centimetre) centre to centre both direction , when the temprature of the surfaces not less than 100 degree. C (One hundred degree celcius) protruding 1mm (One millimetre) over mastic surface all complete as per Section 500 within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 216.32 | Per square metre | |
| 17 | 17 | Construction of Precast Reinforced Cement Concrete railing of Grade M-30 (M-Thirty) mix designed with minimun cement contents not less than 407 Kgs (Four hundred seven kilograms) per cubic metre with aggregate size not exceeding 12mm (Twelve milimetres) true to line and grade, tolerance of vertical Reinforced Cement Concrete post not to exceed 1 in 500 (One in Five hundred) centre to centre spacing between vertical post not to exceed 2000 mm (Two thousand milimetres) leaving adequate space between vertical post for expansion, complete as per drawings and MORTH technical specifications section 1500, 1600, 1700 and 2700 including cost of reinforcement, form work and curing complete and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. | 120.2 | Per running metre | |
| 18 | 18 | Providing and laying of strip seal expansion joint catering to maximum horizontal movement upto 70mm (Seventy millimetres) complete as per approved drawings and standard specifications to be installed by the manufacturer/ supplier of their authorised representative ensuring compliance to the manufacturer's instructions for installation complete as per drawing and MORTH technical specifications Section 2600 and as per the directions of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 10.3 | Per running metre | |
| 19 | 19 | Providing and fixing M.S. drainage spouts complete with 100mm (one hundred millimeter) dia galvanized mild steel down pipe corrosion resistant structural steel grating complete as per drawing and MoRTH technical specifications Section 2700 and as per the directions of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.by the Government. | 26 | Each | |
| 20 | 20 | Earthwork in excavation for structures as per drawing and MORD Technical specifications Section 300 and 1600 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto any lead and lift, dressing of sides and bottom and backfilling in trenches with excavated suitable material, as directed by the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 641.57 | Per cubic metre | |
| 21 | 21 | Providing and laying mechanically mixed and vibrated plain cement concrete in retaining walls for all type of structure complete of nominal mix 1: 4: 8 (One cement: four sand : eight graded crushed stone aggregate 40mm (forty millimeter) nominal size on ground or under water including curing complete and pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work complete in all respect as per drawing and MORD technical specification section 800, 900, 1200 and 1600 as directed by the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax,GST or any other taxes imposed by the Government. | 2279.88 | Per cubic metre | |
| 22 | 22 | Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and MORD technical specifications Section 1200 and 1600 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 720.31 | Per cubic metre | |
| 23 | 23 | Providing and laying 100mm (Hundred millimeter) dia P.V.C pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls extended through the full width of the structure with slope I(V):20(H)(One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification Section 700 and 1200 and as per direction of Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 681 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
