Supply Of Labortary ( Testing ) Equipment Supply Of Lab ( Testing ) Equipments, JK AIDCL LAL MANDI SRINAGAR-Jammu And Kashmir

Supply Of Laboratory ( Testing ) Equipment Supply Of Lab ( Testing ) Equipments.- Smoke Meter With Piezo Sensor To Measure The Opacity Of Smoke With Standard Accessories Smoke Meter To Measure The Opacity Of Smoke With Rpm Measured By Piezo Method, Rs 232, Probe And Standard Accessories. Nspecification : Nmeasurement: Smoke Density In Hsu & K ; Rpm & Oil Temperature, Nrange : Hsu : 0 – 99.9, Nrpm : 0 – 6000, Oil Temperature : 0 – 150°C Nresolution: Hsu : 0.1%, K : 0.01M Rpm : 1 ( For Piezo ) , 10 ( For Battery ) , Noil Temperature : 1°C Nlight Source & Detector: Led & Photocell. Ndisplay: 16X2 Alphanumeric Lcd Display With Backlight. Nwarm Up Time : < 20 Minutes ( Smoke Column Heating ) , Electronics ( < 2Min ) . Temperature Sensor : Rtd ( Pt 100 ) & Nthermocouple. Data Communication Nrs 232 Interface For Computer Connectivity. Nprinter: 24 Column Dot Matrix Type Printer. Noperating Temperature: 0 To 50°C. Measuring Chamber Temperature : 80°C Ninstruction Manual: Technical Manual Which Describes The Equipment And Experimental Procedure N 1 Each 2 2 Computerized Universal Testing Machine It Should Be Able To Perform The:- N ( A ) Tensile ( B ) Compression ( C ) Shear ( D ) Flexural, And ( E ) Low Cyclic Test, For A Wide Variety Of Materials And Components. Nmeasuring Capacity: 100 Kn, Measuring Range: 0-100 Kn, Least Count: 5 N, Load Range In Kn Resolution Of Piston Movement 0.01 Mm, Maximum Tensile Clearance At Fully Descended Piston Position: 50-700 Mm, Maximum Clearance For Compression Test: 0-700 Mm, Distance Between Columns: 450 Mm, Piston Stroke: 150 Mm, Max. Training Speed At No Load: 300 Mm / Min, Power Supply: 3 Phase, 415 V, 50 Hz, Ac., Hp ( Total ) : 1.5, Standard Accessories: Npair For Compression Plate Dia: 120 Mm, Tension Test Jaws ( For Round Specimen Dia: 10-20 Mm, For Flat Specimen Thickness Dia:0-10 Mm ) , Transverse Test N ( Adjustable Roller Support Width: 150 Mm, Diameter: 30 Mm, With Maximum Adjustable Clearance: 450 Mm, Punch Top Radius: 6-12 Mm Nset Of Foundation Bolts And Levelling Screws. Electronic Extensometer For Computerized Version Data Acquisition Panel 1. A Microcontroller Based Data Acquisition System For Data Acquisition & Indication. N2. Lcd Displays For Displaying Load & Crosshead Travel Value. N3. Tare Load & Reset Elongation Facilities Available. N Operation Unit: The Operation Unit Shall Have The Following Function: Ntest Force Calibration Function Break Detection Function Automatic Read Function For Load Cell Characteristic Value Peak / Break Value Display Function Ncycle Figure Display Function Test Condition File Function, Minimum 15 Files. Real Time S-S Curve Display. Software: The Software Shall Have The Following Features: Nthe Software Shall Support Latest Window Based Operating System. The Software Shall Comprise With The Tests:- Tension, Compression, Three-Point Bending, Four-Point Bending, Peel, Friction. Nthe Software Shall Have Real Time Curve Plot. The Software Shall Have Data Analysis Mode. Processing Unit A Set Of Computerized Data Processing And Recording System Interfaced With The Controller Consisting Of: Desktop ( Windows 10 Home 64, 6Th Generation Intel® Core™ I5 Processor, 8 Gb Memory; 1 Tb Hdd Storage, Intel® Hd Graphics 530 ) , 2 Usb 3.0; 4 Usb 2.0, Usb Optical Mouse, Usb Black Keyboard Printer : Colour Laser Jet ( Print Speed Upto 38 Ppm ) Ninstallation: Installation, Mounting & Erection, Wiring, Commissioning And Necessary Civil Work Etc. Will Be Done By The Supplier. Instruction Manual: Technical Manual Which Describes The Equipment And Experimental Procedure 1 Each 3 3 Performance And Endurance Test Rig For Knapsack Sprayer / Hand Pump Sprayer ( As Per Bis Standard ) Mounted On M.S. Structure Dully Powder Coated. Unit Comprises Of M.S. Frame Stand, Pressure Gauge Accumulator For Reducing Damping Effect Of Pressure Gauge, Suction & Discharge Pipe, Sump Tank & Measuring Tank, ½ Hp Gear Motor For Constant Stroke Speed, Digital Counter For Stroke Measurement, Arrangement For Attaching Pressure Assembly To Knapsack / Hand Sprayer Tank Sprayer Pump Pressure Gauge Main Switch Bi01010001010000000000000515bi0100001120 1 Each 4 4 Performance And Endurance Test Rig For Foot And Rocker Sprayer As Per Bis Standard Mounted On M.S. Structure Dully Powder Coated. The Unit Should Comprise Of Foot Or Rocker Pump Mounted On Ms Frame For Testing, Pressure Gauge Accumulator For Reducing Damping Effect Of Pressure Gauge, Suction Pipe & Discharge Pipe, ½ Hp Gear Motor For Constant Stroke Speed, Hand Valve Arrangement For Changing Pump, Sump & Measuring Tank, Main Switch, Stop Clock 1 Each 5 5 Strap Drop And Tank Impact Test Rig As Per Bis Standard Mounted On M.S. Structure Dully Powder Coated. Unit Should Comprises Of M. S. Metallic Fabricated Frame, Double Acting Pneumatic Cylinder’S 3 No., Canti Leaver Assembly, Belt Assembly, Test Tank Assembly, Limit Switch, Pressure Gauge, Flow Control Valve, Electro Pneumatic Solenoid Valve Air Compressor Bi01010001010000000000000515bi0100001121 1 Each 6 6 Test Rig For Fatigue On Compression Sprayer As Per Bis Standard Mounted On M.S. Structure Dully Powder Coated. The Unit Should Comprise Of M.S. Fabricated Stand, Air Compressor Single Cylinder Single Phase, Air Filter, Solenoid Valve, Three Way Valve, Limit Switch, Pneumatic Cylinder, Digital Counter For Stroke Measurement With Timer, Pressure Gauge, Three Separate Line For Three Nozzle Bi01010001010000000000000515bi0100001122 1 Each 7 7 Test Rig For Trigger Type Cut Off Device ( As Per Bis Standard ) Mounted On M.S. Structure Dully Powder Coated. The Unit Should Comprise Of M.S. Fabricated Frame 1000 X 700 X 1500 Approx., Air Compressor Single Cylinder Single Ph , Single Acting Pragmatic Cylinder, Pressure Regulator, Pressure Gauge, Limit Switch, Electrical Cut Out ( 6A ) Solenoid Switch, Spray Nozzle, Unit Will Powder Coated, Stp Pump With Pipe Assembly Bi01010001010000000000000515bi0100001123 1 Each 8 8 Spray Launce Pressure Test Rig ( As Per Bis Standard ) Mounted On M.S. Structure Dully Powder Coated. The Unit Should Comprises Of M. S. Fabricated Stand Assembly, 1 Hp Dc Motor, 4 A, Dc Dimmer Assembly, Cam And Flange Assembly, Connecting Rod Assembly, Electrical Switch, Air Foot Pump Bi01010001010000000000000515bi0100001124 1 Each 9 9 Reciprocating Pump Test Bench ( As Per Bis Standard ) Mounted On M.S. Structure Dully Powder Coated. The Unit Should Comprises Of Reciprocating Pump Of 1 Hp Single Phase 1500 Rpm With A 4A Dimmer Stat, Vacuum Gauge At Suction Line, Pressure Gauge At Discharge Line, Measuring Input To Elect Motor By Energy Meter, Output Of Pump Performance Can Be Estimated At Three Different Speed By Using Pulley, Recirculation Type Unit, M. S. Stand Assembly, Measuring Tank Of Size : 500 X 400 X 400Mm With Frp Coated, M.S. Sump Tank 900 X 600 X 600Mm 1 Each 10 10 Test Set Up Of Mist Blower Mounted On M.S. Structure Dully Powder Coated Nround Type Duct, Pitot Tube, U Tube Manometer, Blower Switch, Single Phase 3 / 4 Hp Centrifugal Blower, Orifice Meter N 1 Each 11 11 Spray Pump Test Rig For Centrifugal Pump Mounted On Ms Structure Duly Powder Coated. Nthe Unit Should Consist Of Multi Stage Centrifugal Pump, Vacuum Gauge At Suction Line, Pressure Gauge At Discharge Line, Input Measured By Three Phase Energy Meter, Output Of Pump Performance Can Be Estimated At 3 Difference Speed By Using V Belt Pulley, Three Hp Ac Motor With Starter, Ms Tank Of Size : 1000 X 800 X 600Mm With Frp Coated, Measuring Tank Of Size : 600 X 500 X 400Mm With Frp Coated N 1 Each 12 12 Leakage Test For Delivery Line Mounted On M.S. Structure Dully Powder Coated Ncomprises Of : 1 Hp Htp Pump, • 3 Phase 1500 Rpm Motor With Starter, Air Compressor Assembly, Air Filter, Pressure Gauge, Regulator With Pressure Gauge, Pneumatic Cylinder, Solenoid Valve, Limit Switch, Nozzle Sprayer Assembly, Sum Tank, Hand Valve, Separate Line For Leakage Purpose N 1 Each 13 13 Hand Arm & Whole Body Human Vibration Meter Including 1 / 1 & 1 / 3 Octave Analysis Includes: Sc 56 Usb Cable, 4 X Aa Batteries, Sc 118 Integrated Connector, 1 / 1 & 1 / 3 Octave Analysis, Sv 105 Hand-Arm Adapter With Triaxial Accelerometer, Sv 38V Whole-Body Seat Accelerometer, Micro Sd Card 2Gb, Cd With Instruction And Software And Carrying Case. 1 Each 14 14 Test Facility For Chemical Composition Of Soil Engaging Of Components ( Multi Ccd Spectrometer ) Spectra Analytical Nresolution: 3600 Lines / Mm And Above Nfocal Length: 300Mm Or Above Nnumber Of Detectors ( Ccd ) : 5 Or Above. N Calibration Required: Fe Base Ms / C / Las & Ci / Sg Iron Alloys, Sus Samples Included Nonline Service Support: Java.Net Online Service Nstandardization: Single Sample, Power Consumption: 30W Standby 800W Sparking Or Equivalent Nitems To Be Included: Grinder For Spectrometer, Argon Regulator, Online Ups 2Kva With 1 Hr Backup And Ncore I5 Complete Desktop With Suitable Os, 4Gb Ram, Dvd Writer, 1Tb Hdd, Dvd, Monitor: 21” Wide Led Tft, Keyboards, Optical Nmouse, Windows 7 / 8 / 8.1 Professional Pre-Loaded, Preloaded Software, Antivirus ( Latest Version ) , Online Ups 2Kva With 1 Hr Backup Suitable Licensed Windows 7 Or Above Software. Nink Jet Colour Printer Nusb 2.0 / 3.0 Port Ncooling System: 1.5 Ton Split Ac Dual Cooling And Hot With Installation And 4 Kva Stabilizer N 1 Each 15 15 Computerised Engine Test Set-Up For Testing Of Engines Of Self Propelled Machines Computer Based Engine Test Rig For Test Of Various Engines Used In Self Propelled Agricultural Machinery 5-6 Hp Capacityengine : 4 Stroke Single Cylinder Diesel Engine 5 Hp And 2 Stoke Petrol Enginedynamometer : The Engine Is Coupled With Matching Eddy Current Dynamometer And Capable To Couple With 4 Stroke Diesel Engine And 2 Stroke Petrol Engine With Required Accessories.Torque Measurement: With Load Cell.1. Eddy Current Dynamometer ( Water Cooled ) • Rated Absorption Power = 5 Kw / 6.7 Hp• Maximum Torque = 15 Nm Or More.• Maximum Torque At Speed = 2500 Rpm• Maximum Speed = 12000 Rpm• Torque Measurement Precision = ± 0.25 Fs%, 0.1 Nm Resolution• Speed Measurement Precision = ± 0.5 Fs %, 1Rpm Resolution• The Direction Of Rotation Both Clockwise & Anti Clockwise.• Reaction Type Torque Sensor To Measure Torque, Having 2 Mv / V Output.• 60 - Tooth Wheel With Magnetic Pick Up Sensor To Measure Speed.• Torque Calibrating Arms And Weights• Electro-Less Nickel Plating On Water Passages ( Groove Side ) Of Loss Plates To Ensure That Corrosion Does Not Detract From Performance.• Magnetic Heavy Duty Water Strainer - Filter.• Water Inlet Pressure Switch.2. Dynamometer Controller: ( Control Panel Mounting Stand On Ground Floor ) , Consisting Of:• Dynamometer Multi Mode Control Unit• Pot For Variable Loading Of Engine.• Multi-Mode Operation Push Buttons Facilitating• Constant Speed• Constant Torque &• Open Loop Modes Of Operation.• Size Of Rack: 19” Rack Type.• The Controller Would Be Provided With Set Overspeed• Facility, Set Runmode Selection And Reset / Start & Stop Switch.• Analogue / Digital Speed Indicator & Digital Torque Indicator Rack• Accuracy: Analogue Speed: ± 1.5% Of Fsd• Digital Torque: ±0.25% Of Fsd ; Digital Speed: ± 1 Rpm• An Isolator Switch Panel• 2 Nos. Blind Temps. Controllers As Inbuilt Safety Against Overheating Of Loss Plates Of The Dynamometer• Pid Temperature Indicator Controller To Indicate Engine Lub Oil Temp. &Air Intake Temp, Fuel Temperature, Dynamometer Water Outlet Temp ( All 0 - 200ºc ) With Temp Sensors Pt 100: Qty. 4 Nos.• Exhaust Gas Temp ( 0 - 1000ºc ) – 1 No. Temp Indicators With Cralsensors.• Air Intake Pressure Indicator With Sensor ( 0 To 70 Mbar ) :Qty. 1 No.• Engine Exhaust Back Pressure Indicator With Sensor ( 0 To 70 Mbar ) Qty. 1 No.• Digital Time Totalizes - 1 No.3. Data Logging Facility: Pc Based, Data Acquisition & Control System. Consisting Of:Computer: Intel Core I5 Processor, 3.00 Ghz Or More, Intel Stable Image Platform Program ( Sipp ) , Memory: 8 Gb, Hard Disk Drive: 1 Tb Hdd, Monitor: 21” Wide Led Tft, Keyboards, Optical Mouse, Windows 7 / 8 / 8.1 Professional Pre-Loaded, Preloaded Software, Antivirus ( Latest Version ) , 3 Years Comprehensive H / W Warranty, Complete With Hp Inkjet Color Printer. Pci Card With Necessarydigital & Analogue Inputs & Outputs. Facility To View / Print Observation Table And Save The Acquired Data .• Software Package For Logging The Engine Test Results.4. Cable Loom With Conduit Of 10Mtr Length: Cable Loom Consist Shielded Control Cables For Torque Sensor, Speed Sensor, Temp & Pressure Sensors & Dynamometer Control, With Male-Female Round Type Connectors With Flexible Conduit Of Length Of 10Mtr.5. Suitable Engine Mounting Stand On Common Base Frame For Engine & Dyno.6. Torsion Coupling: Between Engine & Dynamometer With Guard.7. Volumetric Fuel Consumption Unit Along Withcalibration Set Up:Glass Tube Assembly ( 5 + 10 Cc ) Is Housed In Ms Fabricated Enclosure With Top And Bottom Supports. Photo Sensors Are Fitted On Glass Tube, To Regulate Specific Volume Of Fuel Required During Testing.Digital Timer ( With Suitable Interface To Connect With Pc Based System ) Is Provided For Indication Time In Seconds For The Selected Volume Of Fuel.Instruction Manual:Technical Manual Which Describes The Equipment And Experimental Procedureleast Count Of Timer Is 0.1 Second. Measurement Accuracy: 0.5% Of Selected Volume Whichever Is More Quantity.3 Years Hardware And Service Warranty At Skuast-J, Jammuinstallation: Installation, Mounting & Erection, Wiring, Commissioning And Necessary Civil Work Etc. Will Be Done By The Supplier.Instruction Manual:Technical Manual Which Describes The Equipment And Experimental Procedureleast Count Of Timer Is 0.1 Second. Measurement Accuracy: 0.5% Of Selected Volume Whichever Is More Quantity.3 Years Hardware And Service Warranty At Skuast-J, Jammuinstallation: Installation, Mounting & Erection, Wiring, Commissioning And Necessary Civil Work Etc. Will Be Done By The Supplier.Instruction Manual:Technical Manual Which Describes The Equipment And Experimental Procedure N N 1 Each

INR 4000 /-

INR 30000.0 /-

Refer document

Name of Work: Supply of Labrotory (Testing ) Equipments
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Smoke Meter with Piezo Sensor to measure the opacity of smoke with standard accessories Smoke meter to measure the Opacity of Smoke with RPM measured by Piezo method, RS 232, Probe and standard accessories. \nSpecification :\nMeasurement: Smoke density in HSU & K ; RPM & Oil Temperature, \nRange : HSU : 0 – 99.9,\nRPM : 0 – 6000, Oil Temperature : 0 – 150°C\nResolution: HSU : 0.1%, K : 0.01m RPM : 1 ( for piezo), 10 (for Battery),\nOil Temperature : 1°C\nLight Source & Detector: LED & Photocell.\nDisplay: 16x2 Alphanumeric LCD display with backlight.\nWarm up Time : < 20 minutes ( smoke column heating), Electronics ( < 2min). Temperature Sensor : RTD (PT 100) &\nThermocouple. Data Communication\nRS 232 Interface for Computer connectivity.\nPrinter: 24 Column Dot Matrix type Printer.\nOperating Temperature: 0 to 50°C. Measuring Chamber Temperature : 80°C\nINSTRUCTION MANUAL: Technical manual which describes the equipment and experimental procedure\n		1	each
2	2	Computerized Universal Testing Machine It should be able to perform the:-\n(a)Tensile (b) Compression (c) Shear (d)Flexural, and (e) Low Cyclic Test, for a wide variety of materials and components. \nMeasuring capacity: 100 Kn, measuring range: 0-100 Kn, Least count: 5 N, Load range in Kn Resolution of piston movement 0.01 mm, Maximum tensile clearance at fully descended piston position: 50-700 mm, Maximum clearance for compression test: 0-700 mm, Distance between columns: 450 mm, Piston stroke: 150 mm, Max. training speed at no load: 300 mm/min, Power supply: 3 Phase, 415 V, 50 Hz, AC., HP(Total): 1.5, Standard accessories:\nPair for compression plate dia: 120 mm, Tension Test jaws (For round specimen dia: 10-20 mm, For flat specimen thickness dia:0-10 mm), Transverse Test \n( Adjustable roller support width: 150 mm, diameter: 30 mm, With maximum adjustable clearance: 450 mm, Punch top radius: 6-12 mm\nSet of foundation bolts and levelling screws. Electronic Extensometer for Computerized version Data Acquisition Panel 1. A Microcontroller based data acquisition system for data acquisition & indication. \n2. LCD displays for displaying load & crosshead travel value. \n3. Tare load & reset elongation facilities available.\n Operation Unit: The operation unit shall have the following function:\nTest Force Calibration Function Break Detection Function Automatic Read Function For Load Cell Characteristic Value Peak/Break Value Display Function\nCycle Figure Display Function Test Condition File Function, minimum 15 files. Real Time S-S Curve Display. Software: The software shall have the following features:\nThe software shall support latest window based operating system. The software shall comprise with the tests:- Tension, Compression, Three-point Bending, Four-point Bending, Peel, Friction.\nThe software shall have real time curve plot. The software shall have data analysis mode. Processing Unit A set of computerized data processing and recording system interfaced with the controller consisting of: Desktop (Windows 10 Home 64, 6th Generation Intel® Core™ i5 processor, 8 GB memory; 1 TB HDD storage, Intel® HD Graphics 530), 2 USB 3.0; 4 USB 2.0, USB optical mouse, USB black keyboard Printer : Colour Laser Jet (Print speed upto 38 ppm)\nInstallation: Installation, Mounting & Erection, Wiring, Commissioning and necessary civil work Etc. will be done by the supplier. INSTRUCTION MANUAL: Technical manual which describes the equipment and experimental procedure		1	each
3	3	Performance and Endurance test rig for Knapsack sprayer/ Hand pump sprayer (As Per BIS Standard) Mounted on M.S. Structure dully powder coated. Unit Comprises of M.S. Frame Stand, Pressure gauge accumulator for reducing damping effect of pressure gauge, Suction & discharge pipe, Sump Tank & measuring Tank, ½ HP Gear motor for constant stroke speed, Digital counter for stroke measurement, Arrangement for attaching pressure assembly to Knapsack / Hand Sprayer Tank Sprayer Pump Pressure Gauge Main Switch	BI01010001010000000000000515BI0100001120	1	each
4	4	Performance and Endurance Test Rig for Foot and Rocker Sprayer as Per BIS Standard Mounted on M.S. Structure dully powder coated. The Unit should comprise of Foot or Rocker pump mounted on MS Frame for Testing, Pressure gauge accumulator for reducing damping effect of pressure gauge, Suction pipe & discharge pipe, ½ HP Gear motor for constant stroke speed, Hand valve arrangement for changing pump, Sump & Measuring Tank, Main Switch, Stop clock		1	each
5	5	Strap Drop and Tank Impact Test rig as per BIS Standard Mounted on M.S. Structure dully powder coated. Unit should Comprises of M. S. Metallic Fabricated Frame, Double Acting pneumatic Cylinder’s 3 No., Canti Leaver Assembly, Belt Assembly, Test Tank Assembly, Limit switch, Pressure gauge, Flow Control Valve, Electro Pneumatic Solenoid Valve Air Compressor	BI01010001010000000000000515BI0100001121	1	each
6	6	Test Rig for Fatigue on Compression Sprayer as per BIS Standard Mounted on M.S. Structure dully powder coated. The Unit should Comprise of M.S. Fabricated Stand, Air Compressor single cylinder single phase, Air filter, Solenoid Valve, Three way valve, Limit switch, Pneumatic cylinder, Digital counter for stroke measurement with timer, Pressure Gauge, Three separate line for three Nozzle	BI01010001010000000000000515BI0100001122	1	each
7	7	Test Rig for Trigger Type cut off device (As Per BIS Standard) Mounted on M.S. Structure dully powder coated. The Unit should Comprise of M.S. Fabricated Frame 1000 X 700 X 1500 approx., Air Compressor Single Cylinder Single Ph , Single acting Pragmatic Cylinder, Pressure Regulator, Pressure Gauge, Limit Switch, Electrical Cut Out (6A) Solenoid Switch, Spray Nozzle, Unit Will Powder Coated, STP Pump with Pipe Assembly	BI01010001010000000000000515BI0100001123	1	each
8	8	Spray Launce Pressure Test Rig (as per BIS Standard) Mounted on M.S. Structure dully powder coated. The Unit should Comprises of M. S. Fabricated Stand Assembly, 1 HP DC Motor, 4 A, DC Dimmer Assembly, Cam and Flange Assembly, Connecting rod Assembly, Electrical Switch, Air Foot Pump	BI01010001010000000000000515BI0100001124	1	each
9	9	Reciprocating Pump Test Bench (as per BIS Standard) Mounted on M.S. Structure dully powder coated. The Unit should Comprises of Reciprocating Pump of 1 HP single phase 1500 rpm with a 4A dimmer stat, Vacuum Gauge at suction line, Pressure Gauge at Discharge line, Measuring input to elect Motor by Energy meter, Output of Pump performance can be estimated at three different speed by using pulley, Recirculation type unit, M. S. Stand Assembly, Measuring Tank of Size : 500 x 400 x 400mm with FRP Coated, M.S. sump Tank 900 x 600 x 600mm		1	each
10	10	Test Set Up of Mist Blower Mounted on M.S. Structure dully powder coated \nRound type duct, Pitot Tube, U Tube manometer, Blower switch, Single phase 3/4 HP centrifugal blower, Orifice meter\n		1	each
11	11	Spray Pump Test Rig for Centrifugal Pump Mounted on MS Structure duly powder coated. \nThe unit should consist of Multi stage Centrifugal pump, Vacuum gauge at suction line, Pressure gauge at discharge line, Input measured by three phase energy meter, Output of pump performance can be estimated at 3 difference speed by using V belt pulley, Three HP AC Motor with starter, MS tank of size : 1000 x 800 x 600mm with FRP Coated, Measuring Tank of size : 600 x 500 x 400mm with FRP Coated\n		1	each
12	12	Leakage Test For Delivery Line Mounted on M.S. Structure dully powder coated \ncomprises of : 1 HP HTP Pump, • 3 phase 1500 rpm Motor with starter, Air compressor assembly, Air filter, Pressure gauge, regulator with pressure gauge, Pneumatic cylinder, Solenoid Valve, limit switch, Nozzle sprayer assembly, Sum Tank, Hand valve, Separate line for leakage purpose\n		1	each
13	13	Hand Arm & Whole Body Human Vibration Meter Including 1/1 & 1/3 Octave Analysis Includes: SC 56 USB cable, 4 x AA batteries, SC 118 integrated connector, 1/1 & 1/3 Octave Analysis, SV 105 Hand-Arm adapter with triaxial accelerometer, SV 38V Whole-Body seat accelerometer, Micro SD card 2GB, CD with instruction and Software and Carrying Case.		1	each
14	14	Test facility for Chemical composition of Soil engaging of Components (Multi CCD Spectrometer) Spectra Analytical\nResolution: 3600 lines/mm and above\nFocal length: 300mm or above\nNumber of detectors (CCD): 5 or above.\n Calibration required: Fe base MS/C/LAS & CI/SG iron alloys, SUS Samples Included\nOnline Service Support: Java.net online service\nStandardization: Single sample, Power Consumption: 30W Standby 800W Sparking or equivalent\nItems to be included: Grinder for Spectrometer, Argon Regulator, Online UPS 2KVA with 1 Hr Backup and\nCore i5 complete desktop with suitable OS, 4GB RAM, DVD Writer, 1TB HDD,DVD, Monitor: 21” wide LED TFT, Keyboards, optical\nmouse, Windows 7/8/8.1 Professional pre-loaded, Preloaded software, Antivirus (latest version), online UPS 2KVA with 1 Hr Backup suitable Licensed Windows 7 or above Software.\nInk jet colour printer\nUSB 2.0/3.0 Port\nCooling System: 1.5 Ton split AC dual cooling and hot with Installation and 4 KVA Stabilizer\n		1	each
15	15	Computerised engine test set-up for testing of engines of self propelled machines Computer based engine test rig for test of various engines used in self propelled agricultural machinery 5-6 hp capacityEngine : 4 stroke single cylinder diesel engine 5 hp and 2 stoke petrol engineDynamometer : The Engine is coupled with matching Eddy current dynamometer and capable to couple with 4 stroke diesel engine and 2 stroke petrol engine with required accessories.Torque Measurement: With Load Cell.1. Eddy Current Dynamometer (Water Cooled)• Rated absorption Power = 5 KW / 6.7 HP• Maximum torque = 15 Nm or More.• Maximum Torque at Speed = 2500 RPM• Maximum speed = 12000 RPM• Torque measurement precision = ± 0.25 FS%, 0.1 Nm resolution• Speed measurement precision = ± 0.5 FS %, 1RPM resolution• The direction of rotation both Clockwise & Anti Clockwise.• Reaction type Torque Sensor to measure Torque, having 2 mV/V output.• 60 - Tooth wheel with magnetic pick up sensor to measure speed.• Torque calibrating arms and weights• Electro-less Nickel plating on water passages (groove side) of loss plates to ensure that corrosion does not detract from performance.• Magnetic heavy duty water strainer - filter.• Water Inlet Pressure Switch.2. Dynamometer Controller:(Control Panel mounting stand on ground floor), Consisting of:• Dynamometer Multi Mode Control Unit• Pot for variable loading of Engine.• Multi-mode operation push buttons facilitating• Constant Speed• Constant Torque &• Open Loop modes of operation.• Size of rack: 19” Rack type.• The controller would be provided with SET OVERSPEED• facility, SET RUNMODE Selection and RESET / START & STOP switch.• Analogue/Digital Speed Indicator & Digital Torque Indicator Rack• Accuracy: Analogue speed: ± 1.5% of FSD• Digital torque: ±0.25% of FSD ; Digital speed: ± 1 rpm• An Isolator Switch Panel• 2 Nos. Blind Temps. Controllers as inbuilt safety against overheating of loss plates of the dynamometer• PID Temperature Indicator Controller to indicate Engine Lub Oil Temp. &Air Intake Temp, Fuel Temperature, Dynamometer Water Outlet Temp (All 0 - 200ºC) with Temp Sensors PT 100: Qty. 4 Nos.• Exhaust Gas Temp (0 - 1000ºC) – 1 No. Temp Indicators with CRALsensors.• Air Intake Pressure Indicator with Sensor ( 0 to 70 mbar) :Qty. 1 No.• Engine Exhaust Back Pressure Indicator with Sensor (0 to 70 mbar) Qty. 1 No.• Digital Time Totalizes - 1 No.3. Data Logging Facility: PC Based, Data Acquisition & Control system. Consisting of:Computer: Intel core i5 processor, 3.00 GHz or more, Intel stable image platform program (SIPP), Memory: 8 GB, Hard disk drive: 1 TB HDD, Monitor: 21” wide LED TFT, Keyboards, optical mouse, Windows 7/8/8.1 Professional pre-loaded, Preloaded software, Antivirus (latest version), 3 years comprehensive H/W warranty, complete with HP inkjet Color Printer. PCI Card with necessaryDigital & Analogue inputs & outputs. Facility to View / Print observation table and save the acquired data .• Software package for logging the engine test results.4. Cable loom with conduit of 10Mtr length: Cable loom consist Shielded Control cables for Torque sensor, Speed sensor, Temp & Pressure sensors & Dynamometer Control, with Male-female round type connectors with flexible conduit of length of 10Mtr.5. Suitable Engine Mounting Stand on Common Base Frame for Engine & Dyno.6. Torsion Coupling: Between Engine & Dynamometer with Guard.7. Volumetric Fuel Consumption unit along withCalibration Set Up:Glass tube assembly (5 + 10 cc) is housed in MS fabricated enclosure with top and bottom supports. Photo sensors are fitted on Glass tube, to regulate specific volume of fuel required during testing.Digital timer (with suitable interface to connect with PC based system) is provided for indication time in seconds for the selected volume of fuel.INSTRUCTION MANUAL:Technical manual which describes the equipment and experimental procedureLeast count of timer is 0.1 second. Measurement Accuracy: 0.5% of selected volume whichever is more quantity.3 years hardware and service warranty at SKUAST-J, JammuInstallation: Installation, Mounting & Erection, Wiring, Commissioning and necessary civil work etc. will be done by the supplier.INSTRUCTION MANUAL:Technical manual which describes the equipment and experimental procedureLeast count of timer is 0.1 second. Measurement Accuracy: 0.5% of selected volume whichever is more quantity.3 years hardware and service warranty at SKUAST-J, JammuInstallation: Installation, Mounting & Erection, Wiring, Commissioning and necessary civil work etc. will be done by the supplier.INSTRUCTION MANUAL:Technical manual which describes the equipment and experimental procedure\n\n		1	each