Retrofitting Of Wss Jangla Beel Jharala In Nirmand Block Distt . Kullu ( H . P ) Const . Of Sector Storage Tank 22000 Ltr Cap . At Point 2 , Sector Storage Tank 12000 Ltr . Capacity At Point 5 , Sector Storage Tank 10000 Ltr . Capacity At
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Mar 2021
0 days left
EMD
38903
Bank guarantee accepted
Document Fee
400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nither → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Retrofitting Of Wss Jangla Beel Jharala In Nirmand Block Distt . Kullu ( H . P ) Const . Of Sector Storage Tank 22000 Ltr Cap . At Point 2 , Sector Storage Tank 12000 Ltr . Capacity At Point 5 , Sector Storage Tank 10000 Ltr . Capacity At Point B , B , 6 B And Laying , Jointing And Testing Of Gi Pipe 32 Mm Dia 1500 Rmt , 25Mm Dia
BOQ
| Name of Work: Retofitting of WSS Jangla Beel Jharala in Anni Block Distt. Kullu (H.P) (SH: - C/O Sector Storage Tank 22000 Ltr Cap. at point 2, C/O Sector Storage Tank 12000 Ltr. capacity at point 5 , Sector Storage Tank 10000 Ltr. capacity at point B, B' & 6 B and Laying, jointing and testing of GI pipe 32 mm dia=1500 Rmt , 25mm dia = 2000 Rmt , 20mm dia = 3760 Rmt & Providing & Installation of FHTC 480 Nos ( under Jal Jeevan Mission.) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation and trenches (For pipes and pits) up to all depths and in all classification of earth work such as pick work, jumper work, situated soil including bailing or pumping out of water, blasting soft or hard rock or chiseling or wedding out of soft/hard rock where blasting is prohibited, in all lifts including trimming and dressing of sides, labeling of beds to correct grade including shoring, strutting, planking, timbering and dewatering wherever required. Stacking usable and unusable material /soil separately and after lying jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed with in all leads/ lifts including restoration of un-metalled surfaces to its original conditions and including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. Complete in all respects within all lee\ads and lifts as per direction of the Engineer-in-Charge. | 1697.13 | Cum | |
| 2 | 2 | Providing and laying cement concrete 1:3:6(1cement:3sand:6 graded stone agg.40mm nominal size) and curing complete excluding cost of form work in foundation and plinth with in all lead & lift to the entire statisfaction of Engineer-in-charge. | 6.38 | Cum | |
| 3 | 3 | Providing and laying cement concrete 1:1 ½ :3(1cement:1 ½ sand:3graded stone aggregate of 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work complete in all respect within all lead and lifts as per the direction of Engineer-in-Charge. | |||
| 4 | 3.01 | Foundation footing , basis of columns and the like and mass concrete. | 9.54 | Cum | |
| 5 | 3.02 | Walls (any thickness) but not less that 0.10 Mtrs. thick including attached pilasters buttresses plinth and string course from top of foundation upto floor two levels. | 15.39 | Cum | |
| 6 | 3.03 | Suspended floor, roof, landing, balconies, shelves and thwir supports balconies, beams girder bressumers and cantilevers upto floor two level. | 4.52 | Cum | |
| 7 | 4 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in situ reinforced concrete and plain concrete work complete in all respect within all lead and lifts as per the direction of Engineer-in-Charge. | |||
| 8 | 4.01 | Vertical surfaces such as walls (any thickness)portions and the like including attached pilaster buttresses plinth and string course and the like | 205.38 | Sqm. | |
| 9 | 4.02 | Flat surface such as soffits and suspended floors, roofs, landings and the like: Floors etc. up to 200mm in thickness within all leads and lifts | 38 | Sqm | |
| 10 | 5 | Providing &placing of mild /tor steel reinforcement for RCC. work including bending, binding and placing in position complete up to floor two level complete in all respect within all lead and lifts as per the direction of Engineer-in-Charge. | 2065 | Kg | |
| 11 | 6 | Providing & Fixing of MS Fabricated Protection Panel 750 mm x750mm made with MS Angle 40 x40 x4 mm for frame, MS Angle 30x30 x3 mm for cover. MS Flat 25 x5mm for fixing of sliding door bolt and MS Sheet( 12gauge) 2.50 mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding of MS angle & in RCC slab, by drilling holes in MS angle & in RCC slab, provision for providing and fixing sliding door bolt 300 x16mm MS Handle 100 mm, Lock and applying a coat of red lead paint & painting two coat with steel paint ( Firoza Blue) complete in all respect within all lead and lifts as per the direction of Engineer-in-Charge. | 5 | No | |
| 12 | 7 | Laying Jointing of G.I Pipe (;light grade) tube fitting of following diameter in trenches I/c earth work complete in all respect within all lead and lifts as per the direction of Engineer-in-Charge. | |||
| 13 | 7.01 | Inlet & Oulet pipe - 40mm | 18 | Rmt. | |
| 14 | 7.02 | Inlet & Oulet pipe - 32 mm | 72 | Rmt. | |
| 15 | 8 | P/F C.I Ventilating pipe 50mm dia 1 mt height, with C.I cowl fixed at top of pipe ,complete in all respect within all lead and lifts as per the direction of Engineer-in-Charge. | 5 | mts | |
| 16 | 9 | Laying, jointing and testing in trenches galvanized mild steel screwed and socketed/flanged pipes of following diameter and class, in trenches i/c carriage of pipes from Divisional Store to site of work,including manfacturing reducers/ tapers, all short pieces and G.I bends, Tee, G.I Unions etc. as per site requirement and made from parent tubes ( to be measured and paid alongwith pipes). The rate also includes , flushing,cleaning hydraulic testing of Pipes, complete to the statisfaction of Engineer-in charge with in all lead & lift (Earth work in trenches will be measured & paid seperaly) | |||
| 17 | 9.01 | G.I pipe 20 mm dia.( LC) S/S | 3760 | Rmt | |
| 18 | 9.02 | G.I pipe 25mm dia.( LC) S/S | 2000 | Rmt | |
| 19 | 9.03 | G.I pipe32mm dia.( LC) S/S | 1500 | Rmt | |
| 20 | 10 | Providing & fixing of Brass full way wheel of superior quality IS mark of following dia. With in all lead & lift complete in all respect as per the direction of Engineer in charge. | |||
| 21 | 10.01 | 20mm diameter | 4 | Nos | |
| 22 | 10.02 | 25 mm diameter | 1 | No | |
| 23 | 10.03 | 32mm diameter | 8 | Nos | |
| 24 | 10.04 | 40mm diameter | 3 | Nos | |
| 25 | 11 | Providing and installation drinking water house hold connection from main service pipe line with 15mm dia inclusive of laying and jointing GI pipe (Screwed and socketed) and all kinds of tube fittings such as GI Elbow,union,nipples,6mm ferrule ,bib cock etc. complete in all respect within all leads and lifts as per the direction of Engineer in charge. | |||
| 26 | 11.01 | Laying and jointing and testing of GMS tube (LC) 15mm from main service pipe line with in all leads and lifts upto permises of consumer i/c cost of cutting preparing of main line from where connection is to be provided in all respect as per the direction of Engineer in charge. GI Pipe 15mm dia. | 17280 | Rmt | |
| 27 | 11.02 | Providing and fixing of all fixtures (such as tee,union, elbow, ferrule,bib cock etc) for installation functional water tap to each house/consumer within all leads and lifts as per the direction of Engineer-in-charge. (480Nos household) | 480 | Nos |
AI Tender Summary
Tender Timeline
Mar 03, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 09, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 10, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender