Educational and Research Institute Boards / Undertakings / PSU Closing in 0 days TDR #27210780

Supply Of Instruments/Equipments

Issued by Boards / Undertakings / PSU · OUAT Bhubaneswar, Odisha
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Mar 2021
0 days left
EMD
1
Bank guarantee accepted
Document Fee
1
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
OUAT Bhubaneswar → Odisha
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Supply Of Instruments / Equipments- Flow Meter 2 Size : 40- 100 Mm 3 Flow Range : 25- 250Ml / Mnt 4 Volume Per Revolution : 0.309L 5 Greatest Pressure : 2.5 Mpa 6 Accuracy : ±0.2% 7 Repeatability : =0.05% 8 Standard Unit : Rise 9 Co2 Probe 10 Application - Water / Chemical : Both 11 Nature Of The Chemical ( High Alkali / Hydrofloric Acid / Organic / Inorganic ) : Alkali With Organic And Inorganic 12 Moc Of The Sensor Required : Yes 13 Where To Be Mount Pipe / Vessel : Vessel 14 Top Mounting / Side Mounting : Top 15 Mounting Facility-Flange / Npt Etc., Specified : Npt 16 Operating Temperature : 0-121 17 Operating Pressure : 0-20 18 Sterilization / Sanitization Temperature : 0-121 19 Length Of The Sensor Required : 40Cm 20 Cable Length : 2 Mtr 21 Lower Detection Limit : 10Mbar Pco2 22 Membrane Material : Silicone Reinforced / Ptfe 23 Temperature Range:0-60°C 24 Measuring Principle : Potentiometric 25 O Ring Material : Vitron, Silicone ( Fda Compliant ) 26 Known Interference : So2, Nh3, H2s 27 Transmitter Specifications 28 2-Wire / 4-Wire : 4-Wire 29 Area Of Classification : Atex Category 30 Pipe Mounting / Panel Mounting : Pipe 31 Power Supply Ac / Dc : Dc 32 No.Of Outputs: 5 33 Relay Contacts Required / Not Required : Required 34 1 / 2 Din ( 150 / 150Mm ) Or 1 / 4 Din ( 90 / 90Mm ) 35 Housing 36 Insertion Through- Dip Pipe / Recirculation Line / Npt Side Mounting: Recirculation Line : Recirculation Line 37 Moc Of The Housing : Yes 38 Palletizer Machine 39 Body Material : Hardened Mild Steel 40 Volume Palletizer : 120 Ltr 41 Hopper Volume Pallete Machine : 30 Ltr 42 Capacity Of Palletizer : 150 Kg Per Hour 43 Capacity Of Pellete Making : 100 Kg Per Hour 44 Pellete Size Diameter : 10Mm – 12Mm 45 Pellet Size Length ( Inch ) : 1² To 2² 46 Voltage : 415 V 47 Motor Power Palletizer : 10 Hp 48 Motor Power Pellet Machine : 10 Hp 49 Weight ( Kgs ) Palletizer : 150 Kg 50 Weight ( Kg ) Pellete Machine : 250 Kg 51 Shredder Machine 52 Cutting Mechanism : Twin Shaft 53 Shred Chamber ( Mm ) : 310×310 54 Shred Size ( Mm ) : 8×50-100 55 Shred Capacity : 300-500 Kg / Hr 56 Voltage : 415V 57 Power : 3 Hp 58 Hopper Volume ( Liters ) : 60 L 59 Waste Volume ( Liters ) : 180 L 60 Weight ( Kgs ) : 275 61 Machine Dimension ( Mm ) H×W×D : 1770×700×700 62 Over Load Protector : Yes 63 Over Heat Protector : Yes 64 Motor Start / Off : Auto / Online 65 Working Cycle : Continuous 66 Noise Level : <65Db 67 Hplc Guard Column 68 Cation H Refill, 30×4.6Mm, No. 1250129 Nguard Column: With Ionic Form H+ / Co3 - Deashing Guard Column ( 30× 4.6 Mm Guard Column, Lead Form Ph Ranges 5-9, For Aminex Hpx-87P Column ) 69 Carbo-P Refill, 30×4.6Mm No. 1250119 Nguard Column: 30 × 4.6 Mm, Guard Column, Hydrohen Form, Ph Range 1-3, For Aminex Hydrogen Form Columns 70 Lab Wiley Grinder Or Wiley Mill 71 The Unit Has Two Stationary Steel Blades And Rotary With Steel Edges Provided In The Cast Iron Chamber. 72 A Removable Safety Glass Sheet Plate Is Used From The Face Of Chamber To Permit Observation During Operation 73 Willey Mill Is Fitted On Substantial Cast Iron Base. 74 Complete Unit Supplied With Aluminum / Cast Chamber, Polished Hopper With Cover, Wooden Plunger, Three Delivery Tubes Mounted With Sieves Cloth Mesh No; 20, 40, And 60Mesh 75 One Allen Key For Adjusting Blades And 3 Glass Jars, Brush Etc. Electrically Operated To Work On 220 Volts A.C 76 Working Chamber : 100 Mm X 50 Mm 77 Motor: ½ Hp, Chamber Made Of Stainless Steel. 78 Portable Gas Analyser ( Syn-Gas ) 79 Method Of Detection : Ndir Infrared Sensor For Co, Co2 And Ch4 Electrochemical Sensor For O2 & H2 80 Ranges Available No2 0-25.0%, 0-50.0%, 0-100.0% Nco 0-10.0%, 0-50.0%, 0-100.0% Nco2 0-10.0%, 0-50.0%, 0-100.0% Nch4 0-50.0%, 0-100.0% Nh2 0-5.0% 81 Resolution : 0.1% For All Gases 82 Accuracy & Repeatability : ± 2% Of Reading For All Gases 83 Drift : Less Than 2% Of Full Scale Per Month 84 Response Time ( T-90 ) : 20-30 Seconds To 90% Step Change 85 Ambient Temperature Range : 4 To 50°C 86 Power : 12V / 24V Dc Adaptor 87 Output Options : Rs 232 Interface For Data Logging

BOQ

Name of Work: Supply of Instruments/Equipments
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Flow Meter1No
21.01Size : 40- 100 mm
31.02Flow range : 25- 250ml/mnt
41.03Volume per revolution : 0.309L
51.04Greatest pressure : 2.5 mpa
61.05Accuracy : ±0.2%
71.06Repeatability : =0.05%
81.07Standard unit : Rise
92CO2 Probe1No
102.01Application - Water/Chemical : Both
112.02Nature of the Chemical(High Alkali/Hydrofloric acid/Organic/Inorganic) : Alkali with organic and inorganic
122.03MOC of the Sensor Required : Yes
132.04Where to be mount Pipe/Vessel : Vessel
142.05Top Mounting/Side Mounting : Top
152.06Mounting facility-Flange/NPT etc., Specified : NPT
162.07Operating Temperature : 0-121
172.08Operating Pressure : 0-20
182.09Sterilization/Sanitization Temperature : 0-121
192.1Length of the Sensor required : 40cm
202.11Cable length : 2 mtr
212.12Lower detection limit : 10mbar pCO2
222.13Membrane material : Silicone reinforced/PTFE
232.14Temperature range:0-60°C
242.15Measuring principle : Potentiometric
252.16O ring material : Vitron, silicone (FDA compliant)
262.17Known interference : SO2,NH3, H2S
272.18Transmitter Specifications
282.192-Wire/4-Wire : 4-wire
292.2Area of Classification : ATEX Category
302.21Pipe mounting/Panel Mounting : Pipe
312.22Power Supply AC/DC : DC
322.23No.of Outputs: 5
332.24Relay contacts required/Not Required : Required
342.251/2 DIN (150/150mm) or 1/4 DIN(90/90mm)
352.26Housing
362.27Insertion through- DIP Pipe/Recirculation line/NPT Side mounting: Recirculation line : Recirculation line
372.28MOC of the Housing : Yes
383Palletizer Machine1No
393.01Body Material : Hardened Mild Steel
403.02Volume Palletizer : 120 Ltr
413.03Hopper Volume Pallete Machine : 30 Ltr
423.04Capacity of Palletizer : 150 Kg per hour
433.05Capacity of Pellete Making : 100 Kg per hour
443.06Pellete Size Diameter : 10mm – 12mm
453.07Pellet Size Length (Inch) : 1² to 2²
463.08Voltage : 415 V
473.09Motor Power Palletizer : 10 HP
483.1Motor Power Pellet Machine : 10 HP
493.11Weight (KGS) Palletizer : 150 kg
503.12Weight (KG) Pellete Machine : 250 Kg
514Shredder Machine1No
524.01Cutting Mechanism : Twin Shaft
534.02Shred Chamber (mm) : 310×310
544.03Shred Size (mm) : 8×50-100
554.04Shred capacity : 300-500 Kg/Hr
564.05Voltage : 415V
574.06Power : 3 HP
584.07Hopper Volume (Liters) : 60 L
594.08Waste Volume (Liters) : 180 L
604.09Weight (KGS) : 275
614.1Machine Dimension (mm) H×W×D : 1770×700×700
624.11Over Load Protector : Yes
634.12Over Heat Protector : Yes
644.13Motor Start / Off : Auto / Online
654.14Working Cycle : Continuous
664.15Noise Level : <65DB
675HPLC Guard Column1No
685.01Cation H Refill, 30×4.6mm, No. 1250129\nGuard column: with ionic form H+ /CO3 - deashing guard column (30× 4.6 mm guard column, lead form pH ranges 5-9, for Aminex HPX-87P column)
695.02Carbo-P Refill, 30×4.6mm No. 1250119\nGuard column: 30 × 4.6 mm, guard column, hydrohen form, pH range 1-3, for Aminex hydrogen form columns
706Lab Wiley Grinder or Wiley Mill1No
716.01The unit has two stationary steel blades and rotary with steel edges provided in the cast iron chamber.
726.02A removable safety Glass sheet plate is used from the face of chamber to permit observation during operation
736.03Willey Mill is fitted on substantial Cast iron base.
746.04Complete unit supplied with aluminum / Cast chamber, polished hopper with cover, wooden plunger, three delivery tubes mounted with sieves cloth mesh no; 20, 40, and 60mesh
756.05One Allen Key for adjusting blades and 3 Glass Jars, brush etc. Electrically operated to work on 220 Volts A.C
766.06Working chamber : 100 mm x 50 mm
776.07Motor: ½ hp, Chamber made of stainless steel.
787Portable Gas Analyser (Syn-Gas)1No
797.01Method of Detection : NDIR infrared sensor for CO, CO2 and CH4 Electrochemical sensor for O2 & H2
807.02Ranges Available\nO2 0-25.0%, 0-50.0%, 0-100.0%\nCO 0-10.0%, 0-50.0%, 0-100.0%\nCO2 0-10.0%, 0-50.0%, 0-100.0%\nCH4 0-50.0%, 0-100.0%\nH2 0-5.0%
817.03Resolution : 0.1% for all gases
827.04Accuracy & Repeatability : ± 2% of reading for all gases
837.05Drift : Less than 2% of full scale per month
847.06Response Time (T-90) : 20-30 seconds to 90% step change
857.07Ambient Temperature Range : 4 to 50°C
867.08Power : 12V/24V DC adaptor
877.09Output Options : RS 232 interface for data logging

AI Tender Summary

OUR REF NO 27210780
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 15-03-2021
Authority
Authority Name Orissa University Of Agriculture And Technology
Work Description Supply Of Instruments / Equipments- Flow Meter 2 Size : 40- 100 Mm 3 Flow Range : 25- 250Ml / Mnt 4 Volume Per Revolution : 0.309L 5 Greatest Pressure : 2.5 Mpa 6 Accuracy : ±0.2% 7 Repeatability : =0.05% 8 Standard Unit : Rise 9 Co2 Probe 10 Application - Water / Chemical : Both 11 Nature Of The Chemical ( High Alkali / Hydrofloric Acid / Organic / Inorganic ) : Alkali With Organic And Inorganic 12 Moc Of The Sensor Required : Yes 13 Where To Be Mount Pipe / Vessel : Vessel 14 Top Mounting / Side Mounting : Top 15 Mounting Facility-Flange / Npt Etc., Specified : Npt 16 Operating Temperature : 0-121 17 Operating Pressure : 0-20 18 Sterilization / Sanitization Temperature : 0-121 19 Length Of The Sensor Required : 40Cm 20 Cable Length : 2 Mtr 21 Lower Detection Limit : 10Mbar Pco2 22 Membrane Material : Silicone Reinforced / Ptfe 23 Temperature Range:0-60°C 24 Measuring Principle : Potentiometric 25 O Ring Material : Vitron, Silicone ( Fda Compliant ) 26 Known Interference : So2, Nh3, H2s 27 Transmitter Specifications 28 2-Wire / 4-Wire : 4-Wire 29 Area Of Classification : Atex Category 30 Pipe Mounting / Panel Mounting : Pipe 31 Power Supply Ac / Dc : Dc 32 No.Of Outputs: 5 33 Relay Contacts Required / Not Required : Required 34 1 / 2 Din ( 150 / 150Mm ) Or 1 / 4 Din ( 90 / 90Mm ) 35 Housing 36 Insertion Through- Dip Pipe / Recirculation Line / Npt Side Mounting: Recirculation Line : Recirculation Line 37 Moc Of The Housing : Yes 38 Palletizer Machine 39 Body Material : Hardened Mild Steel 40 Volume Palletizer : 120 Ltr 41 Hopper Volume Pallete Machine : 30 Ltr 42 Capacity Of Palletizer : 150 Kg Per Hour 43 Capacity Of Pellete Making : 100 Kg Per Hour 44 Pellete Size Diameter : 10Mm – 12Mm 45 Pellet Size Length ( Inch ) : 1² To 2² 46 Voltage : 415 V 47 Motor Power Palletizer : 10 Hp 48 Motor Power Pellet Machine : 10 Hp 49 Weight ( Kgs ) Palletizer : 150 Kg 50 Weight ( Kg ) Pellete Machine : 250 Kg 51 Shredder Machine 52 Cutting Mechanism : Twin Shaft 53 Shred Chamber ( Mm ) : 310×310 54 Shred Size ( Mm ) : 8×50-100 55 Shred Capacity : 300-500 Kg / Hr 56 Voltage : 415V 57 Power : 3 Hp 58 Hopper Volume ( Liters ) : 60 L 59 Waste Volume ( Liters ) : 180 L 60 Weight ( Kgs ) : 275 61 Machine Dimension ( Mm ) H×W×D : 1770×700×700 62 Over Load Protector : Yes 63 Over Heat Protector : Yes 64 Motor Start / Off : Auto / Online 65 Working Cycle : Continuous 66 Noise Level : <65Db 67 Hplc Guard Column 68 Cation H Refill, 30×4.6Mm, No. 1250129 Nguard Column: With Ionic Form H+ / Co3 - Deashing Guard Column ( 30× 4.6 Mm Guard Column, Lead Form Ph Ranges 5-9, For Aminex Hpx-87P Column ) 69 Carbo-P Refill, 30×4.6Mm No. 1250119 Nguard Column: 30 × 4.6 Mm, Guard Column, Hydrohen Form, Ph Range 1-3, For Aminex Hydrogen Form Columns 70 Lab Wiley Grinder Or Wiley Mill 71 The Unit Has Two Stationary Steel Blades And Rotary With Steel Edges Provided In The Cast Iron Chamber. 72 A Removable Safety Glass Sheet Plate Is Used From The Face Of Chamber To Permit Observation During Operation 73 Willey Mill Is Fitted On Substantial Cast Iron Base. 74 Complete Unit Supplied With Aluminum / Cast Chamber, Polished Hopper With Cover, Wooden Plunger, Three Delivery Tubes Mounted With Sieves Cloth Mesh No; 20, 40, And 60Mesh 75 One Allen Key For Adjusting Blades And 3 Glass Jars, Brush Etc. Electrically Operated To Work On 220 Volts A.C 76 Working Chamber : 100 Mm X 50 Mm 77 Motor: ½ Hp, Chamber Made Of Stainless Steel. 78 Portable Gas Analyser ( Syn-Gas ) 79 Method Of Detection : Ndir Infrared Sensor For Co, Co2 And Ch4 Electrochemical Sensor For O2 & H2 80 Ranges Available No2 0-25.0%, 0-50.0%, 0-100.0% Nco 0-10.0%, 0-50.0%, 0-100.0% Nco2 0-10.0%, 0-50.0%, 0-100.0% Nch4 0-50.0%, 0-100.0% Nh2 0-5.0% 81 Resolution : 0.1% For All Gases 82 Accuracy & Repeatability : ± 2% Of Reading For All Gases 83 Drift : Less Than 2% Of Full Scale Per Month 84 Response Time ( T-90 ) : 20-30 Seconds To 90% Step Change 85 Ambient Temperature Range : 4 To 50°C 86 Power : 12V / 24V Dc Adaptor 87 Output Options : Rs 232 Interface For Data Logging
Basic Detail
Tender No 03/BPCLOUAT DT 03.03.2021
Bidding Type Tender
Location
City OUAT Bhubaneswar
State Odisha
Key Dates
Publish Date 04 Mar 2021
Submission Date 15 Mar 2021
Open Date 17 Mar 2021
Finance
Tender Value Ref. Documents
Tender Fee 1
EMD 1
Exemption Not Available
Document List
63D376B0-AAC6-43C7-858F-9437A5A949D6.html
Tendernotice_1.pdf
BOQ_346607.xls
DTCNotice.pdf
7885OM.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Mar 04, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Mar 15, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Mar 17, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

63D376B0-AAC6-43C7-858F-9437A5A949D6.html

pdf

Tendernotice_1.pdf

xls

BOQ_346607.xls

pdf

DTCNotice.pdf

pdf

7885OM.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders