Construction Of Implements Shed And Farm Store At Shaheed Captain Pawan Kumar Regional Research Centre , Badhana ( Jind ) , Regional Research Centre, Badhana (Jind)-Haryana

TDR : 27189773

Tender Notice
Corrigendum Details
BOQ

Expired

Regional Research Centre, Badhana (Jind) , Haryana

Tender Brief : Corrigendum : Construction Of Implements Shed And Farm Store At Shaheed Captain Pawan Kumar Regional Research Centre , Badhana ( Jind )

Document Fees
₹ 5000 /-

EMD
₹ 100000.0 /-

Tender Value
Refer document

Submission Date
24-03-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	16-03-2021	Financial bid	Financial Bid	24-03-2021
2	15-03-2021	Bid submission end date (Change)	Date	24-03-2021

Name of Work: Construction of Implements shed and farm store at Shaheed Captain Pawan Kumar Regional Research Centre, Badhana (Jind)
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	Description
2	1.01	INTERNAL CIVIL WORKS : (HSR item No. 6.6 (a) [11.081+425%] Earthwork in excavation in all kinds of soil not exceeding 2 m depth including dressing of bottom & sides of trenches & subsequent filling around foundations in 15cm layer with compaction including disposal of surplus soil as directed within a lead of 30 m (Upto 2m depth)		338	Cum
3	2	(HSR item No. 6.7) Earth work in exacavation in foundations, trenches, of under ground structures, sullage drains, etc., and other similar works in ordinary soil including dressing of bottom and sides, to correct levels and templates, cutting of trees and bushes, dewatering of rain water, diversion of traffic, fixing and maintenance of caution boards and night singnals, crossing over trenches for access to houses, watching, stacking of excavated soil, clear from the edge of excvation, and subsequent filling, where required around masonry, in 15 cm layers, with compaction and disposal of surplus soil as directed within a lead of 30 metres for depth upto 2 metres below natural ground level (for public health works only)\n[932.00 + 370%] Upto 2m depth		42	cum
4	3	HSR 6.7 + note(i) [932.00+370%)+ (22.65 + 425%] Above 2m		34	cum
5	4	(HSR item No. 6.13 (a) [3.434+370%] Earth filling under floors with surplus soil excavated from foundations in 15cm layer including ramming, watering & consolidation lead upto 30m.		279	Cum
6	5	(HSR item No. 10.39 [403.10+450%] Cement concrete 1:4:8 with stone aggregate 40mm nominal size in foundation and plinth (upto 1.50m depth)		38	Cum
7	6	(HSR item No. 10.79 [625.80+450%] Cement concrete 1:2:4 with stone aggregate\n20 mm nominal size for reinforced concrete work but excluding steel-reinforcement\ncentring and shuttering in foundation and plinth		44	Cum
8	7	(HSR item No. 10.81) [947.70 + 450%] Cement concrete 1:2:4 with stone aggregate 20mm nominal size for reinforced concrete work in shelves excluding steel reinforcement but including centering and shuttering laid in position complete in all respects. (first storey)		2	Cum
9	8	(HSR item No. 10.82 + 10.95 (a) Cement concrete 1:1.5:3 with stone aggregate 20mm nominal size for reinforced concrete work in slab with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement but including centering and shuttering laid in position complete in all respects. [1084.8 + 450%] \n(first storey)		84	Cum
10	9	(HSR item No. 10.82 + 10.95 (a)\n[(1084.8 + 7.30)450%] -do- (2nd storey)		3	Cum
11	10	(HSR item No. 10.86 + 10.95 (a) Cement concrete 1:1.5:3 with stone aggregate 20mm nominal size for reinforced concrete work for walls exceeding 20cm thickness (straight and curved) beams, girders, stairs, columns (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering laid in position, complete in all respects. [1188.75+ 450%] -do- (first storey)		64	Cum
12	11	10.86+10.95(a)\n[1196.05 + 450%] -do- (second storey)		4	Cum
13	12	10.88+10.95(a)\n[(1266.05+86.90) 450%] Cement concrete 1:1.5:3 with stone aggregate\n20 mm nominal size for reinforced concrete\nwork for circular or curved columns excluding\nsteel reinforcement but including centring and\nshuttering, laid in position, complete in all\nrespects.		5	Cum
14	13	(HSR item No. 10.90 + 10.95 (a) [774.00+450%] Cement concrete 1:1.5:3 with stone aggregate 20mm nominal size for reinforced concrete work in footings, strips, foundations, beams, rafts, pedestal and approach slabs of bridges etc. excluding steel reinforcement but including centering and shuttering laid in position complete in all respects (for works upto 1.5m below grounds level)		38	Cum
15	14	(HSR item No. 10.132 ) \n[642.40+450%] Cement concrete 1:2:4 with stone aggregate\n20 mm nominal size in pavements,\nroads, taxi-tracks and runways, laid to\nrequired slope and camber, including\nconsolidation, finishing and tamping\ncomplete.		15	Cum
16	15	(HSR item No. 11.2) \n[393.45 + 650%] Ist class Burnt Brick work laid in Cement Sand Mortar 1:6 in foundation & plinth		117	Cum
17	16	(HSR item No. 11.7 ) \nIst class Burnt Brick work laid in Cement Sand Mortar 1:6 in superstructure [414.45 + 650%] -do- (first storey)		97	Cum
18	17	(HSR item No. 11.7 ) \n[422.70 + 650%] -do- (second storey)		18	Cum
19	18	(HSR item No. 11.46) 11.43cm thick brick in Cement Sand Mortar 1:4 with every fourth course reinforced with hoop iron in superstructure.\n [62.85 +650%] -do- (first storey)		38	Sqm
20	19	(HSR item No 13.13 note iii) [52.95+600%) Tile Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 87.50mm mud filling on a layer of 25mm mud plaster and an other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot @1.65 kg/Sqm on top of RCC Slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc.		546	Sqm
21	20	(HSR item No. 13.50)[12.30 + 240%] Top khurrah 0.60 m x 0.60 m for RWP in 25 mm thick Cement Concrete 1:2:4 over 50mm thick Cement Concrete 1:8:16		4	Each
22	21	(HSR item No. 13.57) [64.30 + 240%] Bottom khurra on ground 1.20 m x 0.60m consisting brick on edge laid in CM 1:3 over 75 mm CC 1:8:16 including 12mm thick Cement Plaster 1:3		4	Each
23	22	(HSR item No. 13.64)[5.35 + 240%] Cement concrete 1:2:4 gola 10cmx10cm quadrant along junction of roof with parapet wall finished smooth where specially specified.		188	RM
24	23	(HSR item No. 13.89 (a) Providing and fixing Rain water pipe of ISI mark in cement mortar during masonry work. \n[182 +20%] 100 MM dia PVC pipe 6 Kg. Pressure		30	Mtr.
25	24	(HSR item No. 13.89 (a)[336.65 +20%] 150mm dia PVC Pipe 6 kg. Pressure		25	Mtr.
26	25	(HSR item No. 13.90 (b) [165.40 + 20%] Providing & Fixing 150mm dia PVC Bend ISI Mark		8	each
27	26	(HSR item No. 13.94) [90.00 +10%] Providing & laying average 6 mm thick POP Coating on walls, ceiling, beams and lintels etc. complete in all respects as approved by the engineer-in charge.		100	Sqm
28	27	(HSR item No. 14.1)[36.95+400%] Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling.		500	Sqm.
29	28	(HSR item No. 14.10)[37.60+400%] Conglomerate floor 50 mm thick cement concrete topping 1:2:4.		113	Sqm.
30	29	(HSR item No. 14.62) [201.95 +250%] Kotah stone flooring minimun 25 mm thick in any pattern as specified over 20 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing. (first storey)		56	Sqm
31	30	(HSR item No. 14.66)[237.00 +250%] Kotah stone 20 mm thick in skirting risers of steps, dados and wall facing (lining) and pillars laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc. (first storey)		7	Sqm
32	31	(HSR item No. 14.74)[71.80 +400%] 50 mm thick ironite floor consisting of 40 mm thick cement concrete 1:2:4 base and\ntop layer 10 mm thick laid with one part of\nironite and grey cement mixed together in\nthe ratio of 1:4 by weight to two parts of\nhard granite chipping 6 mm gauge by volume\nfinished smooth with hard rubbing		331	Sqm
33	32	(HSR item No. 14.91)[624.00-15.00%]Pvdg. & fixing ceramic tiles/anti skid tiles of size 400mm x 400mm or above size of approved make in\nflooring, laid in any pattern as specified over base of\n20mm thick cement coarse, sand mortar 1:3 and jointed\nwith white cement slurry mixed with pigment to match\nthe shade of tiles.\nNote:- Tile shall be of premium quality (first quality) of\nreputed manufacturer like NITCO, KAJARIA, SOMANI,\nORIENT, JOHNSONS & RAK		14	Sqm
34	33	(HSR item No. 14.92) Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgandy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shade complete.\n[648.15+ 0%] Size of ceramic Glazed tiles 300 mm x 450 mm		51	sqm
35	34	(HSR item No. 15.6) 12mm thick Cement Plaster 1:5 on rough sides of 9\" thick walls. \n[11.60 + 600%] -do- (first storey)		497	Sqm
36	35	(HSR item No. 15.6) \n[11.78 +600%] -do- (second storey)		86	Sqm
37	36	(HSR item No. 15.11) 15mm thick Cement Plaster 1:5 on rough sides of 9\" thick walls \n [14.25 + 600%] -do- (first storey) upto 4 m		368	Sqm
38	37	(HSR item No. 15.11) \n[14.43+ 600%] -do- (second storey)		107	Sqm
39	38	(HSR item No. 15.16) [18.30 +600%] 20 mm thick cement plaster 1:5 in 2 coats work. (External Plaster)		47	Sqm
40	39	(HSR item No. 15.52) 10 mm thick cement plaster 1:4 on (under side of the ceiling )\n[12.65 + 600%]-do- (first storey)		546	Sqm
41	40	(HSR item No. 15.75) [4.25 + 600%] Cement rendering on plster 1 mm thick		47	sqm
42	41	(HSR item No. 15.79) [0.45 +600%] 20mm thick raised or sunk cement mortar band/drip course in cement mortar 1:4 (3 cm width)		200	m/cm width
43	42	(HSR item No. 16.1) [4.60 +230%] Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead,linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.		100	Sqm
44	43	(HSR item No. 16.2) [3.75 +230%]Applying pink primer or aluminium priming coat on wood work including\npreparation of surface, knotting and stopping etc.		100	Sqm
45	44	(HSR item No. 16.4) [6.55 +230%]Painting two coats excluding priming coat with ready mixed paint in all shades on new wood work.		100	Sqm
46	45	(HSR item No. 16.9) [3.15+230%]Applying priming coat with metal primer on new steel or iron work including preparation of surface.		200	Sqm
47	46	(HSR item No. 16.17) [7.00+230%]Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on new steel or ironwork.		200	Sqm
48	47	(HSR item No. 16.25) [4.15+230%]Applying priming coat with cement primer\nin all shades on newly plastered or\nconcrete exterior surfaces.		1058	Sqm
49	48	(HSR item No. 16.27) [10.90 +230%] Painting two coats with ready-mixed emulsion paint in all shades for interior use on bricks, plaster, cement, fibre board etc. using 1st quality paint.		497	Sqm
50	49	(HSR item No. 16.79) [48.75 +0%] Providing two coats of exterior acrylic emulsion paint (1 st quality)		561	Sqm
51	50	(HSR item No. 16.81) [11.35+230%]Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sdand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc complete (JK / Birla make)		1058	Sqm
52	51	(HSR item No. 17.72) Cost of aluminum fittings complete for doors and windows, such as tower bolts, handles etc., and screws for these fittings (excluding sliding bolt) \n[17.80 + 300%] For single leaf shutter		76	Sqm
53	52	(HSR item No. 17.73) [134.45 +300%] Providing and fixing six-levers brass 10 cm mortice latch and lock, and a pair of lever handles with necessary screws, etc. complete ( indian make of reputed firm, such as Godrej or equivalent)		4	each
54	53	(HSR item No. 17.75) [31.75 +300%] Providing and fixing 150 mm floor brass door stoppers, with rubber cushion, screws, etc. to suit the shutter thickness complete.		4	each
55	54	(HSR item No. 17.82) Providing & fixing hydraulic door closer ISI mark, with necessary screws, etc. complete- door spring 150mm (superior quality), including necessary screw, complete. \n [216.50+ 300%]ISI designation III ( size of door 851 mm to 1000 mm )		4	Each
56	55	(HSR item No. 17.90) Factory manufactured panelled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy & chaplash, etc. (non-coniferous timber other than teak, conforming to I.S. specification No. 1003, kiln-seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail\nand 100 mm wide other rails, with panels of\n15 mm thick, tongued and grooved of\ncommercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc., complete, fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position)-\n(a) [Rs. 410.00+300% ] 30 mm thick		30	Sqm
57	56	(HSR item No. 17.92) Factory manufactured wire gauze door and\nwindow shutters of commercial hard wood\nsuch as hollock, champ, chikrassy and chaplash,\netc. (non-coniferous timber other teak\nconforming to I.S. specification No. 1003,\nkiln seasoned) with 100 mm wide vertical\nstyles, 150 mm wide lock rail 200 mm wide\nbottom rail, and wire gauze of 140 G or 120\nG designation including cost of iron hinges,\nscrews, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but\nincluding labour for fixing the same in position)- (styles and rails of windows shutter shall be 75 mm wide)\n(i) [Rs. 322.25+300% ]30 mm thick		30	Sqm
58	57	(HSR item No. 17.93 a )[Rs. 448.00+200%]Factory manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)-\n(a) commercial veneering with vertical\ngrains or cross bands and face veneer\non both sides commercial facing with\nlaminated core and lipped edges :-\n(iii) 35 mm thick		16	Sqm
59	58	( HSR Item no. 18.12)[1040.35 + 500%] Wrought iron and mild steel (using angles, flats, square bars, tee and channels) ladders\ngrills, grafting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position.		5	Qtls
60	59	( HSR Item no. 18.18) Supplying and fixing rolling shutters, of approved\nmake, M.S. Laths, interlocked together through their entire length, and jointed together, at the end, by end locks mounted on specially designed pipe shaft, with brackets, side guides, 27.5 cm long wire spring grade no. 2, and arrangement for inside and outside locking, with push and pull operation complete, including top cover 0.80 mm\nthick (payment is to be made for the exact size of opening where rolling shutter is to be fixed):\n (b) [401.75 + 500%] with 80 mm x 1.25 mm M.S. Laths		34.19	Sqm
61	60	(HSR item No. 18.22) [927.05 + 500%] Steel reinforcement TMT Bars FE 500 EQR/FE-500 D Grade or more for RCC Works where not included in the complete rate of R.C.C.,but including straightening, bending, binding, wastage, overlpas, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc and placing in position complete in all respect for all heights/depths/storeys/basement etc. Note: Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, coupling, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing shall not be measured and cost of these items shall be demed to be included in the rates for reinforcement.etc		209	Qtls
62	61	(HSR item No. 18.34) [71.55 + 500%] Pressed steel sheet frames (chowkats) consisting of 2 mm thick steel sheet of the specified section,\nincluding iron lugs (hold fasts) iron hinges,conforming to RW.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of readymixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete :-\n(a)[71.55 + 500%] door and window frame of size 89 mm x 50 mm with 40 mm wide single rebate.		46	Metre
63	62	(HSR item No. 18.34) (c )[76.80 + 500%] door and window frame size 127 mmx 50 mm with 40 mm wide double rebate.		116	Metre
64	63	Public Health (HSR item No. 28.24) Cutting holes upto 23cm through brick work in cement wall for pipes and making good\n(a) [14.00 + 300%] 11.43cm thickness of walls		10	Each
65	64	(HSR item No. 28.24)\n(b) [20.35 + 300%] 22.86 cm. thickness of walls		10	Each
66	65	(HSR item No. 29.84) Constructing brick masonry inspection chamber upto 60 mtr.depth in cement mortar 1:5 cement concrete 1:2:4 benching, 12mm thick cement plaster, RCC 1:2:4 slab 100mm thick with with 455x455 mmx455x610mm inside light duty GI inspection chamber cover & frame\n(a) [414.00 + 450%] Size 450x450mm inside		2	Each
67	66	(HSR item No. 29.84)\n(b) [582.00 + 450%] Size 450x600mm inside		2	Each
68	67	(HSR item No. 29.94) [1100.00 + 5%] Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS:12592 including setting the same to correct lines and levels in 1:2 cement sand mortar over manhole including carriage , loading, unloading stacking handling rehandling etc. complete in all respects to the satisfaction of Engineer-in-charge. TYPE: Extra Heavy Duty Set (HD-20) 560 mm Clear opening		2	each
69	68	( HSR Item No. 30.1) PROVIDING A N D F I X I NG IN POSITION BEST INDIAN MAKE (to the approval of the Engineer-in-charge) INDIAN TYPE WATER CLOSET SUITE CONSISTING OF:-\n(i) Closet set V I T R E O U S CHINAWARE W.C. PAN W I TH horizontal inlet, for sinking into floor with A PAIR OF FOOTRESTS, 100 M M H.c.i. ' P ' T R A P W I T H or without\nvent as required and suitable joint for closet inlet.\n(ii) 12V2 LITRES CAPACITY masquito proof CAST IRON FLUSHING CISTERN BEST INDIAN MAKE I.S.I. MARKED NOMOS O R OTHER (as approved by the Engineer-incharge) painted with non-yellowing white or other approved shade ENAMEL PAINT O N OUTSIDE A ND BLACK BITUMASTIC SUPERIOR PAINT OF APPROVED manufacture O N INSIDE complete with all accessories such as 20 mm G.I over flow pipe\nwith specials & clamps upto 15 cm above floor\nlevel of W.C. room, and brass perforated\nmosquito proof cap, 32 mm oulet, 15 mm I.S.I,\nmarked ballcock, G.I. pull and chain R.S. or C.I.\npainted brackets and mosquito proof couplings\nfor outlet and overflow pipes, etc.\n(iii) 3 2 M M DIAMETER T E L E S C O P I C 1.25 mm thick\ngalvanized inside and outside STEEL FLUSH PIPE\nwith clips.\nComplete in all respects INCLUDING CUTTING A ND\nMAKING GOOD T H E WALLS A N D FLOORS A ND\nPAINTING OF FITTINGS ETC. \n[ Rs. 886.00+ 340%]Size 630 mm (ii) Single colour		1	Each
70	69	( HSR Item No. 30.5) PROVIDING A N D FIXING IN POSITION BEST INDIAN MAKE (as approved by the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUITE, SYPHONICTYPE consisting of-\n(i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15\nLITRES CAPACITY MATCHING CHINAWARE CISTERN AND all internal brass fittings COMPLETE W I T H 'P* OR'S' TRAP with or without vent (as approved by the Engineer-in-charge)\n(ii) One piece seat A N D L ID I N HOLLOW BLACK OR W H I TE\nPLASTIC fitted with chromium plated hinges and\nrubber buffers, (to the approval of the\nEngineer-in-charge).\nCOMPLETE in all respects INCLUDING CUTTING\nAND MAKING GOOD T H E WALLS A N D FLOORS.\n[ Rs. 2829.00+ 340%] Double trap syphonic W.C. Suite,(ii) Single colour		1	Each
71	70	( HSR Item No. 30.12) [ Rs.464.00+ 340%] EXTRA OVER item No 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY LOW LEVEL VITREOUS CHINA WARE CISTERN complete with flush bend all other necessary fitting instead of C.I. high level cistern\ncomplete with fittings (ii) Single colour		1	Each
72	71	( HSR Item No. 30.13 )[ Rs.193.00+ 340%] EXTRA OVER I T EM NOS. 30.3 TO 30.6 FOR PROVIDING A ND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT With lid complete instead of hollow black or white plastic seat and lid.\n(i) White plastic seat (solid)		1	Each
73	72	( HSR Item No. 30.26) PROVIDING A N D F I X I NG I N POSITION BEST INDIAN MAKE A RANGE OF T W O URINALS LARGE FLAT BACK OR ANGULAR LIPPED FRONT 6 1 0 MM HIGH I N VITREOUS CHINAWARE W I TH 5 LITRES CAPACITY BEST INDIAN MAKE C.I. AUTOMATIC FLUSHING CISTERN W I T H FITTINGS A N D FLUSH PIPE ETC.\nHIGH consisting of-\n(i) Flat back lipped or angular urinal basin or VITREOUS\nCHINAWARE (to the approval of the Engineer-in-charge).\n(ii) 5 LITRES CAPACITY mosquito proof INDIAN MAKE C.I. AUTOMATIC flushing CISTERN painted with non-yellowing white enamel paint or other approved shade enamel paint on outside and superior black bitumastic paint on inside with screwed 15 mm pipe.\n(iii) PAIR OF R.S. OR C.I. PAINTED BRACKETS A N D BRASS\nCOUPLINGS.\n(iv) Pair of C.I. SPECIAL T Y P E BRACKETS for urinal.\n(v) 32 MM C.P. BRASS SPREADER.\n(vi) Standard size G.I. flush PIPE W I TH C.P. BRASS WALL\nCLIPS A N D UNIONS.\n(vii) 32 MM C.P. brass waste with dome-grating,\n(Viii) 32 MM C.P. BRASS BOTTLE TRAP.\nCOMPLETE INCLUDING CUTTING A N D MAKING GOOD T H E WALLS AND FLOORS A N D PAINTING OF FITTINGS ETC. (AS REQUIRED BY\nTHE ENGINEER-IN-CHARGE)\n[ Rs. 2301.00+ 340%] Range of two Urinals (ii) Single colour		1	Each
74	73	( HSR Item No. 30.40 B) [ Rs. 287.00+ 340%] Providing and fixing (B) Vitreous Chinaware partition plate\n(I) Small Size 680mm x 330 mm (ii) Single colour		2	Each
75	74	( HSR Item No. 30.41)Providing and fixing in position best Indian make\n(ordinary) lavatory suites consisting of\nLavatory in vitreous chinaware size as given\nbelow (to the approval of the Engineer-in-charge)\nincluding China plug for tap hole where necessary\nR.S. or C.I. brackets for building into wall including painting; 32 mm C.P. Brass waste with C.P. brass chain and rubber plug. 15 mm C.P. brass screw down pillar tap with jamnuts\nor couplings best design (as approved by the\nEngineer-in-charge)\nAll fittings best Indian make and to the approval\nof the Engineer-in-charge.\nAll brass work chromium plated and complete in\nall respects including cutting and making good\nthe walls floors and painting of fitting etc.\n[ Rs. 622.00+ 340%] Single Colour (v) Size 560 mm x 450 mm with one no. tap		2	Each
76	75	( HSR Item No. 30.44)Providing and fixing in position best Indian make Pedestal fittings of vitreous chinaware complete (as required by the Engineer-in-charge)\n[ Rs.408.00+ 340%] (ii) Single colour		2	Each
77	76	( HSR Item No. 30.48)[ Rs.98.00+ 340%] PROVIDING A N D F I X I NG IN POSITION 32 MM DIA. G.I. WASTE PIPE EMBEDDED I N WALL or lead waste pipe (weighing 3.47 kg. per metre and 2.8 mm thick) upto floor level including cost of wipped solder joint etc. complete (as required by the Engineer-in-charge)		3	Each
78	77	(HSR item No. 30.50)[92.00 + 340%] Providing and fixing in position best Indian make chromium plated brass bottle trap 32 mm diametre.		2	Each
79	78	(HSR item No. 30.59) Providing and fixing in position best quality stainless steel ( 304 grade) sink built in draining board of siz 600 mm x 450 mm complete as described in item no. 30.53 and 30.58 above \n[7630.00 + 30%] (a) Sink size 600 x 450 x 200 mm		1	Each
80	79	( HSR Item No. 30.67)[ Rs.27.50+ 340%] PROVIDING A N D F I X I NG I N POSITION BEST INDIAN MAKE PAPER HOLDERS F I X ED INTO Wall With C.P. brass screws complete in all respects INCLUDING CUTTING\nAND MAKING GOOD T H E WALLS ETC.\n(a) C.P. BRASS.		1	Each
81	80	( HSR Item No. 30.68) [ Rs.61.00+ 340%] PROVIDING A N D FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawls lugs embedded in walls with CP. brass screws, complete in all respect INCLUDING CUTTING AND MAKING GOODS T H E WALLS ETC.:\n(a) 25 MM DIA, C.P. BRASS ADJUSTABLE.(ii) 600 mm long		1	Each
82	81	( HSR Item No. 30.70)[ Rs.59.00+ 340%] Providing and fixing in position best Indian make soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and\nmaking goods the walls etc.\n(a) CP. BRASS (i) Soap dish large		1	Each
83	82	(HSR item No. 30.71) P/F in position best Indian make bevelled edge 5.5mm thick mirror fixed in position by means of 4 nos. C.P. brass screws and washers complete including cutting and making good the walls etc.\n(b) With Vitreous China frame of size 530 mm x 430 mm\n[347.00 + 340%] Single Color		1	Each
84	83	(HSR item No. 30.74) [67.50 + 340%] Providing and fixing in position superier quality 65 mm i/d opening CP brass dome type hinged grating weighting about 750 gms. Fixed in cement mortar 1:2 complete in all respects (as required by the Engineer-in-charge).		4	Each
85	84	( HSR Item No. 30.75) Providing and fixing in position 15 mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge).\n(a) Bib cock long body. [116 + 340%]		2	Each
86	85	( HSR Item No. 30.75)\n(c) Bib cock [100 + 340%]		2	Each
87	86	( HSR Item No. 30.76)\nProviding and fixing in position C.P. brass stop cocks (as approved by the Engineer-in-charge).\n(a) 15 MM STOP COCK.(i) Stop cock male & female and [101 + 340%]		3	Each
88	87	( HSR Item No. 30.76)\n(ii) Concealed stop cock with flange [130 + 340%]		1	Each
89	88	(HSR item No. 30.83) [11.50 + 340%] P/F in position best Indian make C.P. brass inlet connection 15mm with 375mm pipe & CP brass nuts.		4	Each
90	89	(HSR item No. 30.88) Providing and fixing in position MS or Heavy flat iron clamps made out of MS flat not less than 5 mm of the approved design for fixing CI Soil waste vent or anti pipes to walls complete in all respects including cutting and making good the walls and floor\n[12.50 + 350%] For 100 mm internal diameter pipes		20	Each
91	90	(HSR item No. 30.89) P/F HCI floor trap ISI marked of the self-cleaning design with C.P. brass hinged grating with or without vent arm & including cement concrete 1:2:4 complete in all respects\n[105.00 + 350%] With 75mm internal diameter outlet		4	Each
92	91	(HSR item No. 30.90 b) PROVIDING AND FIXING IN POSITION HCI 50mm INTERNAL DIAMETER OUTLET PLAIN NAHAN TRAP ISI Marked of the self cleaning design with CP BRASS HINGED GRATING WITH FRAME WEIGHING 6.80 KG EACH FIXED complete as fully described in item no. 30.89 above.\n[100.00 + 350%] 75 mm i/d outlet plain Nahani Trap.		4	Each
93	92	(HSR item No. 30.110) P/F in position automatic brass ball valves in tanks\n(b) With plastic ball 25mm diameter [65.50 + 340%]		2	Each
94	93	(HSR item No. 30.114) P/F in position Gully traps fixed in cement concrete 1:4:8 with HCI grating 150x150mm CI cover weighing approximately 7.26 kg & frame clear opening 300 x 300mm and chamber including cost of brick work 1:5 cement concrete 1:8:16 and C.C. 1:2:4 in coping\n(b) [208.00 + 350%] 100mm internal diameter HCI gully traps		2	Each
95	94	(HSR item No. 30.119) Providing and fixing HDPE WATER STORAGE TANKS OF Sintex, Diplast, O.K. Supreme make with covers/Lids marked with IS:12701 on roof Top of buildings including cost of hosting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in- Charge.\n[5263.00 + 0%] 1000 ltrs Capacity		2	EACH
96	95	(DSR Item 18.10.1) Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.\nInternal work - Exposed on wall\n15 mm dia nominal bore [ Rs.284.90-10%]		30	Metre
97	96	(DSR Item 18.10.2) \n20 mm dia nominal bore [ Rs.344.10-10%]		30	Metre
98	97	(DSR Item 18.10.3) \n25 mm dia nominal bore [ Rs.438.00-10%]		25	Metre
99	98	(DSR Item 18.10.4) \n32 mm dia nominal bore [ Rs.529.70-10%]		20	Metre
100	99	DSR Item 18.11 \nProviding and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :\n(DSR Item 18.11.1) 15 mm dia nominal bore [ Rs.447.60-10%]		30	Metre
101	100	(DSR Item 18.11.2) 20 mm dia nominal bore [ Rs.494.10-10%]		30	Metre
102	101	Providing and fixing G.I. pipes complete with G.I. fittings including\ntrenching and refilling etc.\n External work \n(DSR 18.12.5)\n40 mm dia nominal bore [ Rs.483.15-10%]		10	Metre
103	102	(DSR 18.12.6) 50 mm dia nominal bore [ Rs.565.25-10%]		10	Metre
104	103	DSR Item 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved\nquality (screwed end) :\n (DSR 18.17.1) 25 mm dia nominal bore [ Rs.497.15-10%]		2	Each
105	104	(18.17.1A) 20 mm dia nominal bore [ Rs.460.20-10%]		2	Each
106	105	DSR Item 18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading\nthe pipe and making long screws etc. complete (New work) :\n( DSR 18.46.1) 15 mm nominal bore [ Rs 235.75-10%]		2	Each
107	106	( DSR 18.46.2) 20 mm nominal bore [ Rs.261.15 -10%]		2	Each
108	107	( DSR 18.46.3) 25 mm nominal bore [ Rs 340.10-10%]		4	Each
109	108	( DSR 18.46.5) 40 mm nominal bore [ Rs.452.50-10%]		4	Each
110	109	( DSR 18.46.6) 50 mm nominal bore [ Rs.598.10-10%]		2	Each
111	110	DSR Item 18.53A [ Rs 61.25-10%] Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.		10	Each
112	111	Electrical Work Miniature Circuit Breaker and Isolator\n( HSR Item No. 31.17)\nSupply and erection of miniature circuit breaker/\nisolator 240/415 V in the existing distribution board including making necessary connections:-\n(a) Miniature Circuit Breakers of 9 K.A. breaking capacity.\n(ii) 6 amp. to 32 amp MCB\nSingle pole [ Rs. 95+40%]		24	Each
113	112	( HSR Item No. 31.17)\n(iii) 40 amp to 63 amp.\nTriple pole with Neutral [ Rs.499 +40%]		1	Each
114	113	(HSR 31.18)\n(M) Supply and erection of Fittings and Accessories.\n(xi) [ Rs. 6.20+200%] Bakelite angle/straight button holder large size		20	Each
115	114	( HSR Item No. 31.18)\n(xxvi) Supply and erection of hexagonal M.S. box\n1.60 mm thick having each side 8 cms, 7.5\ncms deep, top covered with M.S. lid by means\nof screws including 10 mm dia 30 cm long mild\nsteel rod made into suitable suspension hook\nand erected in R.C.C. slab for erection of fan,\nthe bottom covered with 3 mm thick bakelite\nsheet with suitable holes, painting etc. complete\nwith all labour and material required to complete\nthe job. [ Rs. 26.30+200%]		12	Each
116	115	( HSR Item No. 31.22)(i) Earthing with G.I. earth pipe 4.5 m long and\n40 mm dia with masonry enclosures on the\ntop etc. as required. [ Rs.378.00+400%]		2	Each
117	116	( HSR Item No. 31.22)\n(ii) Extra for using salt and charcoal/coke tor pipe\nearth electrode as required. [ Rs.125.00+400%]		2	Each
118	117	( HSR Item No. 31.22)\n(xii) Pdg. and laying earth connections from earth\nelectrode with 4.00 mm dia G.I. wire in 15 mm\ndia G.I. pipe from earth electrode as required. [ Rs.24.50+400%]		10	Metre
119	118	( HSR Item No. 31.26)\nSupply & erection of under ground cable, loose in existing pipe or trenches complete with necessary connections:-\n(xxv) 25 sq mm 3.50 Core Cable ( Armoured) [Rs. 49.90+200%]		100	Metre
120	119	( HSR Item No. 31.28)\n Supply and erection of suitable compression\ntype brass cable glands for underground cable:-\n(iii) 25 sqmm to 50 sqmm cable 2 to 4 Core [Rs. 16.80+200%]		2	Each
121	120	( HSR Item No. 31.38)\nWiring only in 1.5 sqmm PVC insulated\ncopper conductor cable in existing conduit\npipe and MS boxes covered with 5mm thick\nbakelite sheet including cost of switch, wall\nsocket, ceiling rose etc. (I) Fan Point\n(c) Long point [ Rs. 242.00+20%]		12	Each
122	121	( HSR Item No. 31.38)\n(II) Light point.\n(a) Short point [ Rs. 99.00+20%]		7	Each
123	122	( HSR Item No. 31.38)\n(b) Medium point [ Rs. 152.00+20%]		2	Each
124	123	( HSR Item No. 31.38)\n(c) Long point [ Rs.222.00+20%]		34	Each
125	124	( HSR Item No. 31.38)\n(VII) 3-pin. 5amp Plug Point including\nearthing the 3rd pin etc.\n(a) Short point [ Rs. 116.00+20%]		11	Each
126	125	( HSR Item No. 31.38)\n(VIII) 3-pin 15amp. Plug point with 4 sqmm\nPVC insulated copper conductor cable\nincluding earthing the 3rd pin etc.\n(c) Long point [ Rs.537.00+20%]		34	Each
127	126	( HSR Item No. 31.40) \nSupply and erection of PVC unsheathed copper\nconductor cable single core 1100 volts grade in\npipe of suitable size excluding cost and erection\nof pipe.\n(i) Cable size 1.5 sqmm (3/0.8I mm) [ Rs.10.20+40%]		14.28	Metre
128	127	( HSR Item No. 31.40) \n(iii) Cabie size 4 sqmm (7/0.85 mm) [ Rs.24.50+40%]		34.3	Metre
129	128	( HSR Item No. 31.40) \n(iv) Cable size 6 sqmm (7/1.05 mm) [ Rs.35.60+40%]		49.84	Metre
130	129	( HSR Item No. 31.41)\nSupply and erection of double door sheet\nsteel enclosure distribution board suitable for\nMCBs and ELCBs etc. recessed in wall\nincluding bonding to earth with all labour and\nmaterial required to complete the job in all\nrespect upto to .the entire satisfaction of the\nEngineer-in-Charge of the work.\n(vi) 8-way, TP&N (Horizontal) (8+24) [ Rs.2100+20%]		1	Each
131	130	( HSR Item No. 31.44)\nSupply and erection of PVC conduit\npipe ISI marked (Medium) recessed\nin wall/ceiling etc. including cost of\nPVC bends, inspection box and all\nother material required to complete\nthe job in all respect up to the entire\nsatisfaction of Engineer-in-Charge\nof work.\n(a) 20 mm dia. [ Rs. 31.00+20%]		100	Metre
132	131	( HSR Item No. 31.44)\n(b) 25 mm dia. [ Rs.37.00+20%]		428	Metre
133	132	( HSR Item No. 31.45)\nSupply and erection of copper lugs\nincluding crimping etc. upto the\nentire satisfaction of Engineer-in-Charge\nof the work.\n(a) 1.5 sqmm to 2.5 sqmm [ Rs.4.80+20%]		30	Each
134	133	( HSR Item No. 31.45)\n(b) 4 sqmm to 6 sqmm [ Rs.6.00+20%]		20	Each
135	134	( HSR Item No. 31.56)\nProviding and fixing modular type accessories of approved make in existing box including fixingand making necessary connection, complete in all respect.\n10 amp. 1 way switch [ Rs. 87.00+10%]		76	Each
136	135	( HSR Item No. 31.56)\n20 amp. switch [ Rs. 116.00+10%]		20	Each
137	136	( HSR Item No. 31.56)\n10 amp Socket [ Rs. 106.00+10%]		10	Each
138	137	( HSR Item No. 31.56)\n16 amp. Socket [ Rs. 165.00+10%]		7	Each
139	138	( HSR Item No. 31.56)\nFan Regulator [ Rs. 397.00+10%]		13	Each
140	139	( HSR Item No. 31.56)\nBlanking plate [ Rs. 25.00+10%]		10	Each
141	140	( HSR Item No. 31.57)\nProviding and fixing Gl concealed sheet metal\nboxes with inner and outer faceplate including\nconcealing the box in wall and fixing in position\nwith inner plate and face plate with all labour\nand material required for the job complete in all\nrespect \n1&2 Modules [ Rs.101.00+10%]		2	Each
142	141	( HSR Item No. 31.57)\n3 Modules [ Rs.128.00+10%]		2	Each
143	142	( HSR Item No. 31.57)\n4 Modules [ Rs.148.00+10%]		7	Each
144	143	( HSR Item No. 31.57)\n6 Modules [ Rs.214.00+10%]		3	Each
145	144	( HSR Item No. 31.57)\n8 Modules [ Rs.269.00+10%]		5	Each
146	145	( HSR Item No. 31.57)\n12 Modules [ Rs.336.00+10%]		3	Each
147	146	( HSR Item No. 31.67) (ii) S/E of mark double walled corugated (DWC) HDPE Pipe laid 1 mtr below ground level including diging and refilling of earth including cost of suitable size socket / coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer incharge of the work.\nHDPE Pipe 63/50 mm outer dia/ inner dia [ Rs.95.00+10%]		80	Metre
148	147	( HSR Item No. 31.69) Supply And erection of module case circuit breaker single pole/4 pole on wall on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer in charge of the work. \n(iv) 4 pole MCCB 6 to 63 amp. [ Rs.5152.50+0.00%]		1	Each
149	148	( HSR Item No. 31.69)\n(v) 4 pole MCCB 100 amp. [ Rs.5347.00+0.00%]		4	Each
150	149	( HSR Item No. 31.69)\n(vi) 4 pole MCCB 200 amp. [ Rs.10500.00+0.00%]		3	Each
151	150	( HSR Item No. 31.69)\n(vii) 4 pole MCCB 300 to 400 amp. [ Rs21172.00+0.00%]		1	Each
152	151	( HSR Item No. 31.69)\n (viii) 4 pole MCCB 500 amp. [ Rs.26307.00+0.00%]		1	Each
153	152	(NS)\nS/E of ceiling fan and exhaust fan (ventilator) of Orient/ Bajaj/ Crompton/ Havells to be fixed with fan point with the required labour and material complete as per satisfaction of engineer in charge.(NS)\nCeiling fan 48\" sweep		12	Each
154	153	S/E of ceiling fan and exhaust fan (ventilator) of Orient/ Bajaj/ Crompton/ Havells to be fixed with fan point with the required labour and material complete as per satisfaction of engineer in charge.(NS)\nCeiling fan 56\" sweep		2	Each
155	154	Heavy Duty Exhaust Fan 15\" Dia including MS Louvers ( Crompton/Havells/GE) (NS)		5	Each
156	155	S/E of LED Tube light set 20 Watt complete in all respect on existing light point. duly tested and complete with required labour and material complete as per satisfaction of Engineer-in-Charge.( Philips, Bajaj, Havells) (NS)		20	Each
157	156	S/E of LED Lamp 12 Watt as per the satisfaction of Enginner in charge. make Philips, Bajaj, Havells (NS)		20	Each

Also Visit

Tenders

Haryana Tenders

Construction Tenders

Building Construction Tenders

Shed Construction Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Implements Shed And Farm Store At Shaheed Captain Pawan Kumar Regional Research Centre , Badhana ( Jind ) , Regional Research Centre, Badhana (Jind)-Haryana

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Implements Shed And Farm Store At Shaheed Captain Pawan Kumar Regional Research Centre , Badhana ( Jind ) , Regional Research Centre, Badhana (Jind)-Haryana

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us