| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Mar-202 | date | Date | 15-03-2021 |
| 2 | 15-Mar-202 | Date. | Date | 25-03-2021 |
| 3 | 26-Mar-202 | Time Extension | Date | 31-03-2021 |
| 4 | 03-Apr-202 | Extension of Time | Date | 09-04-2021 |
| Name of Work:Jal Jeevan Mission- 2020-21- Supplying , Laying ,testing ,commissioning and maintenance of distribution system from 32 LL GLSR at Plant and providing FHTCs (8298 Nos) in Ongallur panchayath, and Railway track crossing works. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | (A) - CWSS to Ongallur & Vallappuzha Panchayaths,Supplying Laying Distribution system from 32 LL GLSR at plant | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.001 | Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar | BI01010001010000000000000515BI0100001113 | 18.145 | cum |
| 3 | 1.002 | Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. | BI01010001010000000000000515BI0100001114 | 12 | cum |
| 4 | 1.003 | Cutting the bituminous / concrete roads with cutting machine for a minimum depth of 200mm along the sides of proposed alignment of the pipe to be laid without causing any damage to other utilities, including the charges for hire and conveyance of tools and plant, cost of consumables and charges for lighting, watching, ribbon fencing, caution boards, traffice diversion, and as per the direction of departmental officers etc. complete, before carrying out the demolition of bituminous / concrete road by mechanical means and carrying out the excavation. | BI01010001010000000000000515BI0100001115 | 14000 | metre |
| 5 | 1.004 | Dismantling mannually/by mechanical means and disposal of material within 50meters lead as per direction of Engineer in charge- Bituminous road | BI01010001010000000000000515BI0100001116 | 6000 | 10 sqm |
| 6 | 1.005 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil (Ref. Item No. 2.10.1 of DSR) | BI01010001010000000000000515BI0100001117 | 64628.8 | cum |
| 7 | 1.006 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :"Ordinary Rock. (Ref. Item No. 2.13.1 of DSR) | BI01010001010000000000000515BI0100001118 | 26831.6 | cum |
| 8 | 1.007 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m Hard Rock(Requiring Blasting). (Ref. Item No. 2.13.2 of DSR) | BI01010001010000000000000515BI0100001119 | 275.688 | cum |
| 9 | 1.008 | Fencing one side of trenches, 1.50 m height with two rows of 10 cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2 m intervals. (Data Prepared based on PWD SDB - Item No.1009) | BI01010001010000000000000515BI0100001120 | 2404.95 | metre |
| 10 | 1.009 | Fencing 1.50m high with two rows of casuarina poles (girth 15cm to 24cm) tied with coir yarn on vertical casuarina pole (girth 15cm to 24cm) fixed at 1.5m intervals.NEW DATA (Prepared based on PWD SDB - Item No.1009 | BI01010001010000000000000515BI0100001121 | 100 | metre |
| 11 | 1.01 | Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials :200 mm dia Ductile Iron Class K-9 Pipes Data derived from 18.72.17 in DAR | BI01010001010000000000000515BI0100001122 | 6250 | metre |
| 12 | 1.011 | Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials : 250 mm dia Ductile Iron Class K-9 Pipes Data derived from 18.72.18 in DAR | BI01010001010000000000000515BI0100001123 | 855 | metre |
| 13 | 1.012 | Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials : 300 mm dia Ductile Iron Class K-9 Pipes Data derived from 18.72.19 in DAR | BI01010001010000000000000515BI0100001124 | 2145 | metre |
| 14 | 1.013 | Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials : 400 mm dia Ductile Iron Class K-9 Pipes Data derived from 18.72.21 in DAR | BI01010001010000000000000515BI0100001125 | 325 | metre |
| 15 | 1.014 | Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials : 450 mm dia Ductile Iron Class K-9 Pipes Data derived from 18.72.22 in DAR | BI01010001010000000000000515BI0100001126 | 20 | metre |
| 16 | 1.015 | Conveying and laying Double Flanged (Screwed / Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K-9 conforming to IS: 8329:K-9 conforming to IS: 8329 excluding cost of pipe and specials: 200 mm dia Ductile Iron Double Flanged"Data derived from 18.73.3 in DAR | BI01010001010000000000000515BI0100001127 | 36 | metre |
| 17 | 1.016 | Conveying and laying Double Flanged (Screwed / Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K-9 conforming to IS: 8329:K-9 conforming to IS: 8329 excluding cost of pipe and specials: 250 mm dia Ductile Iron Double Flanged"Data derived from 18.73.4 in DAR | BI01010001010000000000000515BI0100001128 | 12 | metre |
| 18 | 1.017 | "Conveying and laying Double Flanged (Screwed / Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K-9 conforming to IS: 8329:K-9 conforming to IS: 8329 excluding cost of pipe and specials:300 mm dia Ductile Iron Double Flanged"Data derived from 18.73.5 in DAR | BI01010001010000000000000515BI0100001129 | 18 | metre |
| 19 | 1.018 | Conveying and laying Double Flanged (Screwed / Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K-9 conforming to IS: 8329:K-9 conforming to IS: 8329 excluding cost of pipe and specials: 400 mm dia Ductile Iron Double Flanged"Data derived from 18.73.7 in DAR | BI01010001010000000000000515BI0100001130 | 6 | metre |
| 20 | 1.019 | Conveying and laying Double Flanged (Screwed / Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K-9 conforming to IS: 8329:K-9 conforming to IS: 8329 excluding cost of pipe and specials: 450 mm dia Ductile Iron Double Flanged"Data derived from 18.73.8 in DAR | BI01010001010000000000000515BI0100001131 | 6 | metre |
| 21 | 1.02 | Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:200 mm dia pipes | BI01010001010000000000000515BI0100001132 | 1137 | joint |
| 22 | 1.021 | Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:250 mm dia pipes | BI01010001010000000000000515BI0100001133 | 156 | joint |
| 23 | 1.022 | Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:300 mm dia pipe | BI01010001010000000000000515BI0100001134 | 390 | joint |
| 24 | 1.023 | Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:400 mm dia pipes | BI01010001010000000000000515BI0100001135 | 60 | joint |
| 25 | 1.024 | Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:450 mm dia pipes | BI01010001010000000000000515BI0100001136 | 5 | joint |
| 26 | 1.025 | Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:200 mm diameter pipe | BI01010001010000000000000515BI0100001137 | 10 | Nos |
| 27 | 1.026 | Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:250 mm diameter pipe | BI01010001010000000000000515BI0100001138 | 6 | Nos |
| 28 | 1.027 | Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:300 mm diameter pipe | BI01010001010000000000000515BI0100001139 | 8 | Nos |
| 29 | 1.028 | Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:400 mm diameter pipe | BI01010001010000000000000515BI0100001140 | 15 | Nos |
| 30 | 1.029 | Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:450 mm diameter pipe | BI01010001010000000000000515BI0100001141 | 6 | Nos |
| 31 | 1.03 | Cutting 200mm DI pipe | BI01010001010000000000000515BI0100001142 | 35 | No |
| 32 | 1.031 | Cutting 250mm DI pipe | BI01010001010000000000000515BI0100001143 | 11 | No |
| 33 | 1.032 | Cutting of 300mm dia. DI pipe with steel saw | BI01010001010000000000000515BI0100001144 | 16 | No |
| 34 | 1.033 | Cutting 400mm dia DI pipe with steel saw | BI01010001010000000000000515BI0100001145 | 8 | No |
| 35 | 1.034 | Cutting 450mm dia DI pipe with steel saw | BI01010001010000000000000515BI0100001146 | 2 | No |
| 36 | 1.035 | Fabricating MS pipes of size 200mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001147 | 24 | metre |
| 37 | 1.036 | Fabricating MS flanges of diameter 200 mm using 12 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001148 | 12 | Nos |
| 38 | 1.037 | Cutting 200 mm (ID) MS pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001149 | 4 | No |
| 39 | 1.038 | Welding 200 mm (ID) MS pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001150 | 4 | No |
| 40 | 1.039 | Grinding cut and weld edges of 200 mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001151 | 4 | No |
| 41 | 1.04 | Fabricating MS pipes of size 250mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001152 | 18 | metre |
| 42 | 1.041 | Fabricating MS flanges of diameter 250 mm using 12 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001153 | 10 | Nos |
| 43 | 1.042 | Cutting 250 mm (ID) MS pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001154 | 4 | No |
| 44 | 1.043 | Welding 250mm (ID) MS pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001155 | 10 | No |
| 45 | 1.044 | Grinding cut and weld edges of 250 mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001156 | 10 | No |
| 46 | 1.045 | Fabricating MS pipes of size 300mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001157 | 18 | metre |
| 47 | 1.046 | Fabricating MS flanges of diameter 300 mm using 12 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001158 | 10 | Nos |
| 48 | 1.047 | Cutting 300 mm (ID) MS pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001159 | 4 | No |
| 49 | 1.048 | Welding 300 mm (ID) MS pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001160 | 10 | No |
| 50 | 1.049 | Grinding cut and weld edges of 300 mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001161 | 10 | No |
| 51 | 1.05 | Fabricating MS pipes of size 400mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001162 | 67 | metre |
| 52 | 1.051 | Fabricating MS flanges of diameter 400 mm using 12 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001163 | 8 | No |
| 53 | 1.052 | Cutting 400 mm (ID) MS pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001164 | 6 | No |
| 54 | 1.053 | Welding 400 mm (ID) MS pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001165 | 14 | No |
| 55 | 1.054 | Grinding cut and weld edges of 400 mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001166 | 14 | No |
| 56 | 1.055 | Fabricating MS pipes of size 450mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001167 | 6 | metre |
| 57 | 1.056 | Fabricating MS flanges of diameter 450 mm using 16 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001168 | 4 | Nos |
| 58 | 1.057 | Cutting 450 mm (ID) MS pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001169 | 2 | No |
| 59 | 1.058 | Welding 450mm (ID) MS pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001170 | 4 | No |
| 60 | 1.059 | Grinding cut and weld edges of 450 mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001171 | 4 | No |
| 61 | 1.06 | Testing 200mm DI/CI pipeline with potable water to the required test pressure 200 mm dia Observed Data derived from item no.1020 of PHED DATA | BI01010001010000000000000515BI0100001172 | 6250 | metre |
| 62 | 1.061 | Testing 250mm DI/CI pipeline with potable water to the required test pressure . 250 mm dia Observed Data derived from item no.1022 of PHED DATA | BI01010001010000000000000515BI0100001173 | 855 | metre |
| 63 | 1.062 | Testing 300mm DI/CI pipeline with potable water to the required test pressure. 300 mm dia Observed Data derived from item no.1023 of PHED DATA | BI01010001010000000000000515BI0100001174 | 2145 | metre |
| 64 | 1.063 | Testing 400mm DI/CI pipeline with potable water to the required test pressure.400 mm dia Observed Data derived from item no.1026 of PHED DATA | BI01010001010000000000000515BI0100001175 | 325 | metre |
| 65 | 1.064 | Testing 450mm DI/CI pipeline with potable water to the required test pressure. 450 mm dia Observed Data derived from item no.1027 of PHED DATA | BI01010001010000000000000515BI0100001176 | 20 | metre |
| 66 | 1.065 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials). 90 mm nominal outer dia pipes." | BI01010001010000000000000515BI0100001177 | 140425 | metre |
| 67 | 1.066 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials).110 mm nominal outer dia pipes. | BI01010001010000000000000515BI0100001178 | 5525 | metre |
| 68 | 1.067 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials). 140 mm nominal outer dia pipes. | BI01010001010000000000000515BI0100001179 | 8605 | metre |
| 69 | 1.068 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials).160 mm nominal outer dia pipes. | BI01010001010000000000000515BI0100001180 | 4850 | metre |
| 70 | 1.069 | Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. but excluding cost of pipes and fittings - External work. 80 mm dia nominal bore Data derived from item no.18.12.8 of DARData for 10 m | BI01010001010000000000000515BI0100001181 | 4213 | metre |
| 71 | 1.07 | Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. but excluding cost of pipes and fittings - External work. 100 mm dia nominal bore Observed Data derived from item no.18.12 of DAR | BI01010001010000000000000515BI0100001182 | 166 | metre |
| 72 | 1.071 | "Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. but excluding cost of pipes and fittings - External work. 125 mm dia nominal bore Observed Data derived from item no.18.12 of DAR | BI01010001010000000000000515BI0100001183 | 258 | metre |
| 73 | 1.072 | Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. but excluding cost of pipes and fittings - External work. 150 mm dia nominal ore Observed Data derived from item no.18.12 of DAR | BI01010001010000000000000515BI0100001184 | 146 | metre |
| 74 | 1.073 | "Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :80 mm diameter. Class I"Observed Data derived from item no.18.31.of DAR | BI01010001010000000000000515BI0100001185 | 75 | Nos |
| 75 | 1.074 | "Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :100 mm diameter. Class I"Data derived from item no.18.31.1.1of DAR | BI01010001010000000000000515BI0100001186 | 17 | Nos |
| 76 | 1.075 | "Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :125 mm diameter. Class I"Data derived from item no.18.31.2.1 of DAR | BI01010001010000000000000515BI0100001187 | 20 | Nos |
| 77 | 1.076 | Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :150 mm diameter. Class I"Data derived from item no.18.31.3.1 of DAR | BI01010001010000000000000515BI0100001188 | 17 | Nos |
| 78 | 1.077 | "Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :200 mm diameter. Class I"Data derived from item no.18.31.4.1 of DAR | BI01010001010000000000000515BI0100001189 | 11 | Nos |
| 79 | 1.078 | "Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :250 mm diameter. Class I"Data derived from item no.18.31.5.1 of DAR | BI01010001010000000000000515BI0100001190 | 4 | Nos |
| 80 | 1.079 | "Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :300 mm diameter. Class I"Data derived from item no.18.31.6.1 of DAR | BI01010001010000000000000515BI0100001191 | 4 | Nos |
| 81 | 1.08 | "Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :400 mm diameter. Class I"Observed Data derived from item no.18.31.of DAR | BI01010001010000000000000515BI0100001192 | 1 | Nos |
| 82 | 1.081 | Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) : 450 mm diameter. Class I"Observed Data derived from item no.18.31.of DAR | BI01010001010000000000000515BI0100001193 | 1 | Nos |
| 83 | 1.082 | Conveying and fixing C I Single acting Air Valve of approved quality with bolts,nuts,rubber insertions etc . excluding the cost of air valve(the tail pieces if required will be paid seperately): 25 mm Single acting Air Valve Observed Data derived from item no.18.59.of DAR | BI01010001010000000000000515BI0100001194 | 60 | Nos |
| 84 | 1.083 | Conveying and fixing C I Single acting Air Valve of approved quality with bolts,nuts,rubber insertions etc . excluding the cost of air valve(the tail pieces if required will be paid seperately): 40 mm Single acting Air Valve Observed Data derived from item no.18.59.of DAR | BI01010001010000000000000515BI0100001195 | 20 | Nos |
| 85 | 1.084 | Conveying and fixing C I Single acting Air Valve of approved quality with bolts,nuts,rubber insertions etc . excluding the cost of air valve(the tail pieces if required will be paid seperately): 80 mm Double acting Air Valve Data derived from item no.18.59.2 of DAR | BI01010001010000000000000515BI0100001196 | 12 | Nos |
| 86 | 1.085 | Conveying and fixing C I Single acting Air Valve of approved quality with bolts,nuts,rubber insertions etc . excluding the cost of air valve(the tail pieces if required will be paid seperately):100 mm Double acting Air Valve | BI01010001010000000000000515BI0100001197 | 2 | Nos |
| 87 | 1.086 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil | BI01010001010000000000000515BI0100001198 | 194.301 | cum |
| 88 | 1.087 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001199 | 9.241 | cum |
| 89 | 1.088 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001200 | 62.057 | cum |
| 90 | 1.089 | Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | BI01010001010000000000000515BI0100001201 | 509.372 | sqm |
| 91 | 1.09 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001202 | 97.287 | cum |
| 92 | 1.091 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001203 | 7883.17 | kilogram |
| 93 | 1.092 | Supplying and fixing 500mm dia CI manhole cover with frame( medium duty) charges including all cost, labour charges etc complete. | BI01010001010000000000000515BI0100001204 | 21 | Nos |
| 94 | 1.093 | Providing and fixing Valve protection tube of 200 mm dia with Class-20 AC pipe, with RCC coverslab on top for 150mm dia controll valves and 40mm air valves. | BI01010001010000000000000515BI0100001205 | 223 | No |
| 95 | 1.094 | Providing and laying D.I specials of class K - 12 suitable for push - on jointing as per IS : 9523 : | BI01010001010000000000000515BI0100001206 | 80.902 | quintal |
| 96 | 1.095 | Supplying specials for GI pipes 5% | BI01010001010000000000000515BI0100001207 | 216959 | No |
| 97 | 1.096 | Supplying specials for pvc pipes 3% | BI01010001010000000000000515BI0100001208 | 1.35022e+06 | No |
| 98 | 1.097 | Supply ,stacking,spreading and consolidating of Quarry Muck in the trench of pipe line, including carriage, loading ,unloading & stacking up to any lead. | BI01010001010000000000000515BI0100001209 | 186.272 | cum |
| 99 | 1.098 | Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge. | BI01010001010000000000000515BI0100001210 | 81.17 | cum |
| 100 | 1.099 | Conveying surplus cut earth from site for removing obstruction to traffic and pedestrians at town areas where sufficient land is not available for stacking excavated earth within initial 5 km. ( code no. 1.1.2 ) including loading , unloading, stacking <br> | BI01010001010000000000000515BI0100001211 | 217 | cum |
| 101 | 1.1 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001212 | 10000 | kg |
| 102 | 1.101 | Repairing leakage/breakage of 80 mm AC pipe line by cutting and dismantling the damaged pipe portion (up to 1.5 m) including charges for earth work excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new AC pipe to the required length, rejointing the pipeline using CID Joints , testing the pipe line by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc.complete as per the direction of Departmental officers excluding the cost of pipe and CID Joints. | BI01010001010000000000000515BI0100001213 | 12 | Leak |
| 103 | 1.102 | Repairing leakage/breakage of 100 mm AC pipe line by cutting and dismantling the damaged pipe portion (Up to 1.5 m) including charges for earth work excavation in all kinds of soil including tar / concrete cutting for for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new AC pipe to the required length, rejointing the pipeline using CID Joints , testing the pipe line by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc.complete as per the direction of Departmental officers excluding the cost of pipe and CID Joints. | BI01010001010000000000000515BI0100001214 | 4 | Leak |
| 104 | 1.103 | Repairing leakage/breakage of 125 mm AC pipe line by cutting and dismantling the damaged pipe portion (Up to 1.5 m) including charges for earth work excavation in all kinds of soil including tar / concrete cutting for for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new AC pipe to the required length, rejointing the pipeline using CID Joints , testing the pipe line by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc.complete as per the direction of Departmental officers excluding the cost of pipe and CID Joints. | BI01010001010000000000000515BI0100001215 | 3 | Leak |
| 105 | 1.104 | Repairing leakage/breakage of 150 mm AC pipe line by cutting and dismantling the damaged pipe portion (Up to 1.5 m) including charges for earth work excavation in all kinds of soil including tar / concrete cutting for for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new AC pipe to the required length, rejointing the pipeline using CID Joints , testing the pipe line by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc.complete as per the direction of Departmental officers excluding the cost of pipe and CID Joints. | BI01010001010000000000000515BI0100001216 | 2 | Leak |
| 106 | 1.105 | Repairing leakage/breakage of 200 mm AC pipe line by cutting and dismantling the damaged pipe portion (Up to 1.5 m) including charges for earth work excavation in all kinds of soil including tar / concrete cutting for for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new AC pipe to the required length, rejointing the pipeline using CID Joints , testing the pipe line by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc.complete as per the direction of Departmental officers excluding the cost of pipe and CID Joints. | BI01010001010000000000000515BI0100001217 | 2 | Leak |
| 107 | 1.106 | Repairing leakage/breakage of 250 mm AC pipe line by cutting and dismantling the damaged pipe portion (Up to 1.5 m) including charges for earth work excavation in all kinds of soil including tar / concrete cutting for for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new AC pipe to the required length, rejointing the pipeline using CID Joints , testing the pipe line by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc.complete as per the direction of Departmental officers excluding the cost of pipe and CID Joints. | BI01010001010000000000000515BI0100001218 | 2 | Leak |
| 108 | 1.107 | Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing PVC / HDPE mains up to 110 mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, PVC Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers. | BI01010001010000000000000515BI0100001219 | 6398 | Nos |
| 109 | 1.108 | Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing AC / GI mains up to 125 mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, GI / MS / SS Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers. | BI01010001010000000000000515BI0100001220 | 500 | Nos |
| 110 | 1.109 | Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing PVC / HDPE mains from 140mm to 200mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, PVC Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers. | BI01010001010000000000000515BI0100001221 | 1400 | Nos |
| 111 | 1.11 | Providing additional length of house connection pipe using 20mm Indian Standard Class 6 uPVC pipe and specials and testing the joints etc., by trenching and refilling in all kinds of soil with trench of average cross section 0.3m x 0.75m for laying of connection pipe and service pipe, lighting, watching, providing caution boards, traffic control etc., including cost of materials, hire for tools, cost of consumables and labour charges etc. complete, but excluding the cost of cutting of concrete / tarred / bituminous roads etc., and as per the directions of the department officers. | BI01010001010000000000000515BI0100001222 | 60960 | metre |
| 112 | 1.111 | Providing 15mm (1/2 inch) GM Air Valve in the water meter assembly for 15mm connection, using 20mm Indian Standard Class 6 uPVC pipes and specials including cost of materials, consumables, hire for tools and labour charges etc. complete and as per the directions of the department officers. | BI01010001010000000000000515BI0100001223 | 25 | Nos |
| 113 | 1.112 | Providing 15mm PVC Tap in the water meter assembly for 15mm connection, using 20mm Indian Standard Class 6 uPVC pipes and specials including cost of materials, consumables, hire charges for tools and labour charges etc. complete and as per the direction of departmental officers. | BI01010001010000000000000515BI0100001224 | 8298 | Nos |
| 114 | 1.113 | Cost for Geo Tagging of Water connections | BI01010001010000000000000515BI0100001227 | 8298 | No |
| 115 | 1.114 | Shifting existing water service connection from existing line to newly laid pipe line using PE pipe with all accessories | BI01010001010000000000000515BI0100001228 | 1471 | No |
| 116 | 1.115 | Supplying and installing a electro-magnetic flow meter conforming to protection level of IP-68 for flow sensor and IP-67 for transmeter and having an accuracy level of 0.5% with LED/LCD display unit suitable to measure the discharge of transmission main of 450mm dia. The flow meter should have the housing (flow sensor) to be made of ss304/carbon steel with anti corrosive protection and inside liner to be made up of hard rubber/neoprene all confirming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer with provision for wireless transfer through GSM. The manufacturers should have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions. Product should be tested and calibrated at FCRI, Palakkad and test certificate should be produced. Flow meter should be calibrated with physical measurement at site after installation. Suitable for 450mm DI K-9 Pipe.A battery back up of min. 24 hrs should be provided. | BI01010001010000000000000515BI0100001229 | 1 | No |
| 117 | 2 | (C) - COST OF MATERIALS | BI01010001010000000000000515BI0100001230 | ||
| 118 | 2.001 | Supply of DI K9 Pipe Conforming to IS 8329/2000, 200mm Dia. | BI01010001010000000000000515BI0100001231 | 6282 | metre |
| 119 | 2.002 | Supply of DI K9 Pipe Conforming to IS 8329/2000, 250mm Dia. | BI01010001010000000000000515BI0100001232 | 860 | metre |
| 120 | 2.003 | Supply of DI K9 Pipe Conforming to IS 8329/2000, 300mm Dia. | BI01010001010000000000000515BI0100001233 | 2164 | metre |
| 121 | 2.004 | Supply of DI K9 Pipe Conforming to IS 8329/2000, 400mm Dia. | BI01010001010000000000000515BI0100001234 | 327 | metre |
| 122 | 2.005 | Supply of DI K9 Pipe Conforming to IS 8329/2000, 450mm Dia. | BI01010001010000000000000515BI0100001235 | 21 | metre |
| 123 | 2.006 | 300mm D/F pipe | BI01010001010000000000000515BI0100001236 | 18 | metre |
| 124 | 2.007 | Supplying 450 MMDI k9 D/F pipe | BI01010001010000000000000515BI0100001237 | 6 | metre |
| 125 | 2.008 | 250mm D/F pipe | BI01010001010000000000000515BI0100001238 | 12 | metre |
| 126 | 2.009 | Supplying 200mm DI Flanged pipe | BI01010001010000000000000515BI0100001239 | 36 | metre |
| 127 | 2.01 | 400mm D/F pipe | BI01010001010000000000000515BI0100001240 | 76 | metre |
| 128 | 2.011 | Supply of PVC Pipe, 10kg/cm2, 160mm Dia. | BI01010001010000000000000515BI0100001241 | 4875 | metre |
| 129 | 2.012 | Supply of pvc pipe, 12.5kg/cm2, 140mm Dia. | BI01010001010000000000000515BI0100001242 | 2086 | metre |
| 130 | 2.013 | Supply PVC Pipe, 10kg/cm2, 140mm Dia. | BI01010001010000000000000515BI0100001243 | 5935 | metre |
| 131 | 2.014 | Supply of PVC Pipe, 8kg/cm2, 140mm Dia. | BI01010001010000000000000515BI0100001244 | 392 | metre |
| 132 | 2.015 | Supply of PVC Pipe, 6kg/cm2, 140mm Dia. | BI01010001010000000000000515BI0100001245 | 237 | metre |
| 133 | 2.016 | Supply of PVC pipe, 12.5kg/cm2, 110mm Dia. | BI01010001010000000000000515BI0100001246 | 1131 | metre |
| 134 | 2.017 | Supply of PVC Pipe, 10kg/cm2, 110mm Dia. | BI01010001010000000000000515BI0100001247 | 3201 | metre |
| 135 | 2.018 | Supply of PVC Pipe, 8kg/cm2, 110mm Dia. | BI01010001010000000000000515BI0100001248 | 1222 | metre |
| 136 | 2.019 | Supply of 90mm PVC, 12.5Kg/cm2 | BI01010001010000000000000515BI0100001249 | 22422 | metre |
| 137 | 2.02 | Supply of PVC Pipe, 10kg/cm2, 90mm Dia. | BI01010001010000000000000515BI0100001250 | 75928 | metre |
| 138 | 2.021 | Supply of PVC Pipe, 8kg/cm2, 90mm Dia. | BI01010001010000000000000515BI0100001251 | 42568 | metre |
| 139 | 2.022 | Supply of PVC Pipe, 6kg/cm2, 90mm Dia. | BI01010001010000000000000515BI0100001252 | 212 | metre |
| 140 | 2.023 | Supply of GI pipe as per DLPC rate 125mm GI | BI01010001010000000000000515BI0100001253 | 258 | metre |
| 141 | 2.024 | Supply of GI pipe as per DLPC rate 150mm GI | BI01010001010000000000000515BI0100001254 | 146 | metre |
| 142 | 2.025 | Supply of GI pipe as per DLPC rate 100mm GI | BI01010001010000000000000515BI0100001255 | 166 | metre |
| 143 | 2.026 | Supply of GI pipe as per DLPC rate 80mm GI | BI01010001010000000000000515BI0100001256 | 4213 | metre |
| 144 | 2.027 | Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 25mm. | BI01010001010000000000000515BI0100001257 | 60 | No |
| 145 | 2.028 | Supply of CI Air Valve with Flanges, Conforming to IS 14845 - 2000, Kinetic Air Valve Type DS1, Size 40mm | BI01010001010000000000000515BI0100001258 | 20 | No |
| 146 | 2.029 | Supply of CI Air Valve with Flanges, Conforming to IS 14845 - 2000, Kinetic Air Valve Type DS1, Size 80mm. | BI01010001010000000000000515BI0100001259 | 12 | No |
| 147 | 2.03 | Supply of CI Air Valve with Flanges, Conforming to IS 14845 - 2000, Kinetic Air Valve Type DS1, Size 100mm. | BI01010001010000000000000515BI0100001260 | 2 | No |
| 148 | 2.031 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 80mm. | BI01010001010000000000000515BI0100001261 | 75 | No |
| 149 | 2.032 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 100mm. | BI01010001010000000000000515BI0100001262 | 17 | No |
| 150 | 2.033 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 125mm. | BI01010001010000000000000515BI0100001263 | 20 | No |
| 151 | 2.034 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 150mm. | BI01010001010000000000000515BI0100001264 | 17 | No |
| 152 | 2.035 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 200mm. | BI01010001010000000000000515BI0100001265 | 11 | No |
| 153 | 2.036 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 250mm. | BI01010001010000000000000515BI0100001266 | 4 | No |
| 154 | 2.037 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 300mm. | BI01010001010000000000000515BI0100001267 | 4 | No |
| 155 | 2.038 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 400mm. | BI01010001010000000000000515BI0100001268 | 1 | No |
| 156 | 2.039 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 450mm. | BI01010001010000000000000515BI0100001269 | 1 | No |
| 157 | 3 | ROAD RESTORATION CHARGES FOR PANCHAYATH ROADS | BI01010001010000000000000515BI0100001274 | ||
| 158 | 3.001 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size ) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete | BI01010001010000000000000515BI0100001275 | 2500 | cum |
| 159 | 3.002 | Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBRValue-25 | BI01010001010000000000000515BI0100001276 | 600 | cum |
| 160 | 3.003 | 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete ( tack coat to be paid for separately):With Refinery Modified Bitumen CRMB 55 conforming to IRC:SP:53 - 1999 | BI01010001010000000000000515BI0100001277 | 3000 | sqm |
| 161 | 3.004 | 4 cm thick bitumastic sheet with hot bitumen of approved quality using stone chippings (60% with 12.5 mm nominal size and 40% with 10 mm nominal size) @ 2.60 cum per 100 sqm and coarse sand @ 2.60 cum per 100 sqm of road surface and with bitumen @ 56 kg/ cum of stone chippings and @ 128 kg /cum of sand over a tack coat with hot straight run bitumen , including consolidation with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid separately):With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt | BI01010001010000000000000515BI0100001278 | 3000 | sqm |
| 162 | 4 | Railway track crossing works | BI01010001010000000000000515BI0100001279 | ||
| 163 | 4.001 | Horizontal drilling 400mm dia MS Pipe (Pushing & Pulling method) | BI01010001010000000000000515BI0100001280 | 18 | metre |
Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
