| 1 | 1 | work proper | BI01010001010000000000000515BI0100001113 | | |
|---|
| 2 | 1.01 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001114 | 29.04 | sqm |
|---|
| 3 | 1.02 | od1151/2020_2021 : Providing and fixing welded mesh with M.s angle and flat iron frames for ventilators of mildsteelflat sections of size 25x5 mm,and 40x40x6 mm angle joints mitred and welded by flat pieces to the frame or to thewall, including fixing of necessary hinges and screws and applying priming coat of approved steel primer, allcomplete as per the direction of Engineer in charge. | BI01010001010000000000000515BI0100001115 | 65 | sqm |
|---|
| 4 | 1.03 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001116 | 65 | sqm |
|---|
| 5 | 1.04 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001117 | 1.3 | cum |
|---|
| 6 | 1.05 | 11.40 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001118 | 15 | sqm |
|---|
| 7 | 1.06 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001119 | 49 | sqm |
|---|
| 8 | 1.07 | 9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | BI01010001010000000000000515BI0100001120 | 100 | kg |
|---|
| 9 | 1.08 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001121 | 3.5 | cum |
|---|
| 10 | 1.09 | 50.6.1.4 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | BI01010001010000000000000515BI0100001122 | 4.8 | cum |
|---|
| 11 | 1.1 | 5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001123 | 0.125 | cum |
|---|
| 12 | 1.11 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001124 | 25 | kilogram |
|---|
| 13 | 1.12 | 13.7.2 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001125 | 9.7 | sqm |
|---|
| 14 | 1.13 | 10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001126 | 300 | kg |
|---|
| 15 | 1.14 | 4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001130 | 0.15 | cum |
|---|
| 16 | 1.15 | 18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | BI01010001010000000000000515BI0100001147 | 2000 | Litre |
|---|
| 17 | 1.16 | od998/2020_2021 : Providing and fixing 8mm PVC foam board(coloured or white mutiwood, equivalent to bestwood/ multiwood), in aluminium fabricated partition frames excluding the cost of aluminium extrusions as per architectural drawings and directions of Engineer-in-charge. | BI01010001010000000000000515BI0100001116 | 3.6 | sqm |
|---|
| 18 | 1.17 | od999/2020_2021 : Supplying and fixing 3 way floor trap with gratings at best quality | BI01010001010000000000000515BI0100001117 | 3 | each |
|---|
| 19 | 1.18 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001118 | 15 | kg |
|---|
| 20 | 1.19 | 21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001119 | 28 | kg |
|---|
| 21 | 1.2 | 21.3.3 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness | BI01010001010000000000000515BI0100001120 | 3.6 | sqm |
|---|
| 22 | 1.21 | 9.117.1 : Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm | BI01010001010000000000000515BI0100001121 | 6 | metre |
|---|
| 23 | 1.22 | od1002/2020_2021 : Supplying and fixing approved quality single paneled ready made solid door frame with shutters to suit the openings including all cost of materials and labour charges for fabricating and fixing position but excluding cost of furniture fittings etc. complete | BI01010001010000000000000515BI0100001122 | 3.35 | sqm |
|---|
| 24 | 1.23 | 50.18.9.9.2 : Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 | BI01010001010000000000000515BI0100001123 | 15 | metre |
|---|
| 25 | 1.24 | 50.18.9.4.2 : Providing and fixing PVC pipes includings joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm dia 6 Kgf/cm2 | BI01010001010000000000000515BI0100001124 | 20 | metre |
|---|
| 26 | 1.25 | 50.18.7.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall | BI01010001010000000000000515BI0100001125 | 15 | metre |
|---|
| 27 | 1.26 | 50.18.8.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 | BI01010001010000000000000515BI0100001126 | 10 | metre |
|---|
| 28 | 1.27 | 50.18.9.14.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall | BI01010001010000000000000515BI0100001130 | 10 | metre |
|---|
| 29 | 1.28 | od1006/2020_2021 : Supplying and fixing best quality PVC manhole chamber of size 350 mm dia with top lid including all cost of materials and labour charges for fixing in position etc complete. | BI01010001010000000000000515BI0100001161 | 2 | no |
|---|
| 30 | 1.29 | 50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow | BI01010001010000000000000515BI0100001162 | 4 | no |
|---|
| 31 | 1.3 | 50.18.9.22.3 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow | BI01010001010000000000000515BI0100001163 | 4 | no |
|---|
| 32 | 1.31 | 50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend | BI01010001010000000000000515BI0100001164 | 4 | no |
|---|
| 33 | 1.32 | 50.18.9.20.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl | BI01010001010000000000000515BI0100001165 | 1 | no |
|---|
| 34 | 1.33 | od1007/2020_2021 : Providing and fixing PVC moulded fittings- 32mm dia float valve. | BI01010001010000000000000515BI0100001166 | 1 | no |
|---|
| 35 | 1.34 | od1008/2020_2021 : Providing and fixing PVC moulded fittings- 63mm dia Ball valve | BI01010001010000000000000515BI0100001167 | 2 | no |
|---|
| 36 | 1.35 | od1019/2020_2021 : Supplying and fixing best quality C.P Angle cock of 20 mm dia for wash basin, water closet etc. | BI01010001010000000000000515BI0100001168 | 6 | no |
|---|
| 37 | 1.36 | od1020/2020_2021 : Providing and fixing SS tower bolt 150mm | BI01010001010000000000000515BI0100001169 | 2 | no |
|---|
| 38 | 1.37 | od1021/2020_2021 : Providing and fixing 250mm SS aldrop | BI01010001010000000000000515BI0100001170 | 3 | no |
|---|
| 39 | 1.38 | 18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore | BI01010001010000000000000515BI0100001171 | 2 | each |
|---|
| 40 | 1.39 | 50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. | BI01010001010000000000000515BI0100001172 | 2 | no |
|---|
| 41 | 1.4 | 17.2.2 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid | BI01010001010000000000000515BI0100001130 | 2 | each |
|---|
| 42 | 1.41 | 17.23 : Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. | BI01010001010000000000000515BI0100001147 | 2 | each |
|---|
| 43 | 1.42 | od1014/2020_2021 : Providing and fixing Urinal wall mount partition using HPL board rectangular size 900x500x400 of standard pattern, including of fittings and brackets, cutting and making good the walls wherever require: | BI01010001010000000000000515BI0100001149 | 2 | each |
|---|
| 44 | 1.43 | 17.7.4 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar taps | BI01010001010000000000000515BI0100001150 | 2 | each |
|---|
| 45 | 1.44 | 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001151 | 300 | sqm |
|---|
