| 1 | 1 | Servicing of solar water heater upto 300 ltrs capacity including checking serviceability of individual componenets and replacement of worn out fasteners, gaskets, washers accessories, inspection of the entire system, cleaning of sacrificial anode, rectification of any leaks, tightening of electric loose connections etc. and making system operational. Note: (i) Spares will be measured and paid separately under relevant item of sch 'A' | | 12 | Job |
|---|
| 2 | 2 | Supply and fixing in repairs heating elements ISI marked of size 3/2 KW 230 Volts required for Geysers of 15/25 Ltrs capacity as per exisiting make. | | 5 | Each |
|---|
| 3 | 3 | S&F in repairs thermostat ISI marked of 20 to 89 degree celcius suitable for electric geyser complete as per existing Make all as specified and directed by Engr In Charge. | | 5 | Each |
|---|
| 4 | 4 | Supply and fixing in repair solar water tube 58x1500mm for the solar water heaters complete as per existing Make all as specified and directed by Engr In Charge. | | 4 | Each |
|---|
| 5 | 5 | Supply and fixing in repair solar water tube 58x1800mm for the solar water heaters complete as per existing Make all as specified and directed by Engr In Charge. | | 4 | Each |
|---|
| 6 | 6 | Supply and fixing in repairs silicon washers for hot water tank suitable for EGTS complete as per existing Make all as specified and directed by Engr In Charge. | | 8 | Each |
|---|
| 7 | 7 | Supply and fixing in repairs LLDPE cap washer at top of the EGTS complete as per existing Make all as specified and directed by Engr In Charge. | | 6 | Each |
|---|
| 8 | 8 | Supply and fixing in repairs LLDPE washer at bottom of the EGTS complete as per existing Make all as specified and directed by Engr In Charge. | | 6 | Each |
|---|
| 9 | 9 | Supply and fxing in repairs of hot water storage tank having internal MS tank of 2.5mm thickness, duly epoxy coated, with 50mm PUF of 40Kg density and outer covering of PPGI sheet of 0.5mm TCT and side covers of powder coated aluminium. Inlet and outlet connection nipples of SS 304 capacity 100 Ltr complete as per existing Make. all as specified and directed by Engr In Charge. | | 3 | Each |
|---|
| 10 | 10 | Supply and fxing in repairs of hot water storage tank having internal MS tank of 2.5mm thickness, duly epoxy coated, with 50mm PUF of 40Kg density and outer covering of PPGI sheet of 0.5mm TCT and side covers of powder coated aluminium. Inlet and outlet connection nipples of SS 304 capacity cappacity 200 Ltr. as per existing Make complete all as specified and directed by Engr In Charge. | | 1 | Each |
|---|
| 11 | 11 | Supply and fxing in repairs of hot water storage tank having internal MS tank of 2.5mm thickness, duly epoxy coated, with 50mm PUF of 40Kg density and outer covering of PPGI sheet of 0.5mm TCT and side covers of powder coated aluminium. Inlet and outlet connection nipples of SS 304 capacitycappacity 300 Ltr. complete as per existing Make all as specified and directed by Engr In Charge. | | 1 | Each |
|---|
| 12 | 12 | Supply and fixing in repairs MS stand suitable for 100 LPD solar water heater complete as per existing Make all as specified and directed by Engr In Charge. | | 2 | Each |
|---|
| 13 | 13 | Supply and fixing in repairs MS stand suitable for 200 LPD solar water heater complete as per existing Make all as specified and directed by Engr In Charge. | | 1 | Each |
|---|
| 14 | 14 | Supply and fixing in repairs MS stand suitable for 300 LPD solar water heater complete as per existing Make all as specified and directed by Engr In Charge. | | 1 | Each |
|---|
| 15 | 15 | Supply and fixing in repairs of Flat plate collector- 2 m x 1m ISI marked as per MNRE standard complete as per existing Make all as specified and directed by Engr In Charge. | | 2 | Each |
|---|
| 16 | 16 | Supply and fixing in repairs of hose pipe to connect hot water tank of flat collector complete as per existing Make all as specified and directed by Engr In Charge. | | 25 | RM |
|---|
| 17 | 17 | WINDOW/ SPLIT TYPE AC Tracing out the leakage from suction line, discharge line, evaporation condenser, filter, capilary tube by suitable method including brazing, welding, replacement of filter Strainer charging line and filling of gas R-22 in window type AC capacity 1.5/2 TR | | 1 | Each Job |
|---|
| 18 | 18 | Tracing out the leakage from suction line, discharge line, evaporation condenser, filter, capilary tube by suitable method including brazing, welding, replacement of filter Strainer charging line and filling of gas R-22 for split type A/C 1.5 /2.0 Ton capcity | | 5 | Each Job |
|---|
| 19 | 19 | S&F in replacement starting capacitor of 100/120 MFD, 230 Volt AC suitable for 1.5 TR/2.0TR capacity AC complete all as specified and directed by Engr In Charge. Make : Usha/Keltron/ BHEL /KEL/Texla | | 4 | Each |
|---|
| 20 | 20 | Removing existing unserviceable compressor cut/uncut from window type/split A/C and S&F new factory reconditioned clean compressor ( with 1 year replacement warranty), in exchange suitable for 1.5/2 ton capacity A/C including fixing in original position, with filling of gas R-22 and pressure testing including welding, brazing replacement of filter/Strainer made of copper capilary tube,complete all as specified and directed by Engr In Charge. | | 2 | Each Job |
|---|
| 21 | 21 | S&F in replacement running capacitor 50/40 mfd 230 Volt AC suitable for 1.5 Ton capacity AC . | | 5 | Each |
|---|
| 22 | 22 | S&F in replacement overload protector AC suitable for 1.5 TR/2.0 TR capacity Make : Usha /Shriram | | 4 | Each |
|---|
| 23 | 23 | S&F in replacement starting relay box type R-22 suitable for 1.5TR/2.0TR capacity A/C | | 4 | Each |
|---|
| 24 | 24 | Removing of existing unserviceable burnt condenser motor from window/split type AC 1.5/2.0 ton capacity and S&F in replacement condenser motor of capacity 1/6 HP 1350 RPM as per existing single phase 230 V including fixing in original position with replacement rubber bush of motor mounting, testing complete. | | 3 | Each |
|---|
| 25 | 25 | S&F in replacement of copper condenser in split type air conditioner outdoor unit | | 3 | Each |
|---|
| 26 | 26 | S&F in replacement of electronic circuit complete including controling unit ie (Remote ) all as per existing sample and suitable for 1.5 / 2.0 Ton capacity split type AC. | | 5 | Each |
|---|
| 27 | 27 | S&F in replacement of Copper pipe 1/4 with ' U ' Foam for 1.5/2 ton capacity split AC complete all as specified and directed by Engr In Charge. | | 10 | RM |
|---|
| 28 | 28 | S&F in replacement of Copper pipe 5/8 with ' U ' Foam for 1/5/2 ton capacity split AC complete all as specified and directed by Engr In Charge. | | 10 | RM |
|---|
| 29 | 29 | S&F in replacement of copper AC suction valve of size 5/16 all as directed by Engr-in -charge | | 3 | Each |
|---|
| 30 | 30 | S&F in replacement of copper AC suction valve of size 5/8 complete all as specified and directed by Engr In Charge. | | 3 | Each |
|---|
| 31 | 31 | S&F in replacement of rubber pipe for waste water of 15mm complete all as specified and directed by Engr In Charge. | | 25 | RM |
|---|
| 32 | 32 | REFRIGERATORS M & L Tracing out the leakage from suction/ discharge line, condenser and alike by suitable method including brazing, welding, gas charging R-134a, replacement of strainer, capilary tube, nut bolts of compressor of refrigerators of different capacities etc. | | 4 | Each Job |
|---|
| 33 | 33 | Removing existing unserviceable compressor cut/uncut from Refrigerator capacity 286/310 ltrs and S&F in replacement factory reconditioned compressor ( with 1 year replacement warranty) clean exchange including fixing in original position charging of gas R-134a, replacement of strainer, capillary tube complete. | | 2 | Each Job |
|---|
| 34 | 34 | S&F in replacement thermostat defrost type for refrigerator complete all as specified and directed by Engr In Charge. | | 5 | Each |
|---|
| 35 | 35 | S&F in replacement condenser in outer side of refregerator complete all as specified and directed by Engr In Charge. | | 6 | Each |
|---|
| 36 | 36 | S&F in replacement 15 Watt lamp screw/Pin type for refrigerator complete all as specified and directed by Engr In Charge. Make : Phillips/Bajaj | | 5 | Each |
|---|
| 37 | 37 | S&F in replacement of Cooling coil with PVC freezer door complete with screw/nut bolt suitable for 286/310 ltrs capacity refrigerator complete all as specified and directed by Engr In Charge. | | 4 | Each |
|---|
| 38 | 38 | S&F in replacement of over load relay suitable for 280/310 Ltrs capacity refrigirator as per existing complete all as specified and directed by Engr In Charge. | | 4 | Each |
|---|
| 39 | 39 | WATER COOLER Tracing out the leakage from suction/discharge line, condenser and alike by suitable method including brazing, welding, gas charging R-22, replacement of strainer, capilary tube, nut bolts of compressor of water cooler 40/80 ltrs capacity complete all as specified and directed by Engr In Charge. | | 4 | Each Job |
|---|
| 40 | 40 | M&L Removing of existing unserviceable compressor cut/uncut from water cooler 120/150 ltrs capacity and S&F in replacement factory reconditioned clean compressor ( with 1 year replacement warranty) suitable for existing water cooler 120/150 ltrs capacity including fixing in original position with filling R-22 gas charging and pressure testing, brazing replacement of stainer, capilary tube cleaning of condenser coil etc. complete all as specified and directed by Engr In Charge. | | 2 | Each Job |
|---|
| 41 | 41 | Removing of existing unserviceable burnt condenser motor from water cooler 120 to 320 ltr capacity and S&F in replacement condenser motor of capacity 1/30 HP 1350 RPM as per existing single phase 230 V including fixing in original position with replacement rubber bush of motor mounting, testing complete all as specified and directed by Engr In Charge. | | 3 | Each Job |
|---|
| 42 | 42 | S&F in replacement starting relay box type for 120/150 ltrs capacity Water Cooler including overload protector complete all as specified and directed by Engr In Charge. | | 5 | Each |
|---|
| 43 | 43 | S&F in replacement thermostat including knob, plate and screw suitable for 120/150 ltrs capacity storage type water cooler complete all as specified and directed by Engr In Charge. | | 5 | Each |
|---|
| 44 | 44 | S&F in replacement push cock, lifting cock 15mm size as per existing pattern for water cooler complete all as specified and directed by Engr In Charge. | | 5 | Each |
|---|
| 45 | 45 | S&F in replacement PVC drain pipe approx 1.5 mtr long of 25mm dia for water cooler complete with clamp screws etc complete for drainout water from water cooler complete all as specified and directed by Engr In Charge. | | 4 | Each |
|---|
| 46 | 46 | S&F in replacement Float valve, chromium plated with polythene PVC ball for 15mm (1/2\") bore size suitable for 40/80 ltrs capacity water cooler. | | 4 | Each |
|---|
| 47 | 47 | S&F chromium plated drain pot suitable for collecting drain water from 120/150 ltrs water cooler, as per existing pattern complete all as specified and directed by Engr In Charge. | | 3 | Each |
|---|
| 48 | 48 | Removing existing unserviceable condenser motor and S&F in replacement condenser motor 1/30 HP single phase 1350 RPM complete all as specified and directed by Engr In Charge. | | 4 | Each |
|---|
| 49 | 49 | S&F in replacement capacitor 10 MFD, 440 Volt AC complete all as specified and directed by Engr In Charge. | | 3 | Each |
|---|
| 50 | 50 | S&F in repairs Post top lattern light fitting die cast aluminium graphite grey powder coated spigot, acrylic clear diffuser,opal acrylic diffuser provided at LED area to minimize glare for LED System wattage 40W with LED Color temperature 3000k + 300k complete with accessories including wiring with copper wire of 2.5sqmm from junction box to fitting complete all as specified and directed by Engr in charge. Make: BGCT W4 LED WW of Bajaj or eqvt in wipro/philips | | 8 | Each |
|---|
| 51 | 51 | Supply& Fixing in repairs Decorative, wall mounting, chrome finish fixture with opal glass diffuser suitable for 7.5 W A60 LED filamnet lamp E27 base. Cat part No LHFOAJD1TZ1C060 of make Havells or equivalent Bajaj/Halonex/Surya incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed by Engr In Charge. | | 20 | Each |
|---|
| 52 | 52 | Supply& Fixing in repairs Decorative, wall mounting, brushed nickel finish fixture with opal glas diffuser suitable with 9W LED lamp B22 base. Cat part No LHFOAJE1TN1I060 of make Havells or equivalent Bajaj/Halonex/Surya incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed by Engr In Charge. | | 20 | Each |
|---|
| 53 | 53 | Supply & Fixing 20watt LED wall light fitting made up of opal glass warm white color for living & bedroom including 2.5 KV surge protector complete all as specified and directed by Engr In Charge. | | 21 | Each |
|---|
| 54 | 54 | Supply& Fixing 3watt LED Bedside light fitting for bedroom including 2.5 KV surge protector complete all as specified and directed by Engr In Charge. | | 7 | Each |
|---|
| 55 | 55 | Supply and fixing in repairs Plastic body exhaust fan 250 mm sweep AC, 240 volts fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable including provn of hole and aluminium frame etc for fixing the fan as required at site complete all as specified and directed by Engr In Charge. Make :Orient / Crompton/ Havells/Bajaj | | 12 | Each |
|---|
| 56 | 56 | S&F in repairs modular switch piano flush type single pole one way 6/10 Amps,1 module complete all as specified and directed by Engr In Charge. Make-Anchor/havells/bajaj. | | 20 | Each |
|---|
| 57 | 57 | S&F in repairs moduler socket 6/10 Amps -2/3 pin combined 2 module, complete all as specified and directed by Engr In Charge.Make-Anchor/havells/bajaj. | | 15 | Each |
|---|
| 58 | 58 | S&F in repairs modular switch piano flush type single pole one way 16/20 Amps,1 module complete all as specified and directed by Engr In Charge Make-Anchor/havells/bajaj. | | 12 | Each |
|---|
| 59 | 59 | S&Fin repairs Modular socket 6/16 Amps 2/3 Pin combined 2 module complete all as specified and directed by Engr In Charge. Make-Anchor/havells/bajaj. | | 12 | Each |
|---|
| 60 | 60 | S & F in repairs Modular switch Bell Push 6/10 Amps single pole one way. complete all as specified and directed by Engr In Charge. Make-Anchor/havells/bajaj. | | 6 | Each |
|---|
| 61 | 61 | S&F in repairs modular fan regulator Step type 120W 2 module complete all as specified and directed by Engr In Charge. | | 12 | Each |
|---|
| 62 | 62 | S&F in repairs LED security light of 30 to 35 Watt with min lumen output 3000lmn, in die cast housing, powder coated with grey colour finish IP 66 prismatic polycarbonate cover with LED Lenses and making electrical connections with 2.5sqmm 2core Al service wire complete all as specified and directed by Engr In Charge. Make: D923065 of Wipro or eqvt in havells / Bajaj | | 13 | Each |
|---|
| 63 | 63 | S& F in repairs Street light bracket made out of GI pipe 25mm light grade ISI marked 1.5 Mtr long bend to shape as required at site including M S Clamp made out of flat iron 50 X 5mm with necessary nuts Bolts etc all as specified suitable fo all fitting complete all as specified and directed by Engr In Charge. | | 13 | Each |
|---|
| 64 | 64 | Supply& Fixing in repairs LED Batten fittings 5 Watt complete with lamp & round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed by Engr In Charge. Model: Wipro Garnet 5W D560565 or Bajaj BCLSB 05 WH or evqt in Jaquar | | 200 | Each |
|---|
| 65 | 65 | Supply& Fixing in repairs LED Batten fittings 20 Watt complete with lamp & round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed by Engr In Charge. Model Wipro Garnet 20W D562065 or Bajaj BCLSB 20 WH or evqt in Jaquar | | 200 | Each |
|---|
