Providing Fixing And Supply Aluminium Table And Alrmirahs At Rnb Office Leh
Tender Value
2.65 Lakhs
Estimated cost
Bid Submission
02 Mar 2021
0 days left
EMD
5300
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Fixing And Supply Aluminium Table And Alrmirahs At Rnb Office Leh
BOQ
| Name of Work:- Providing , fixing and supply Aluminium Table and Alrmirahs at R&B office leh. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z\nsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) | 146.3 | Kg | |
| 2 | 2 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) | 50.05 | Kg | |
| 3 | 3 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.50 mm thickness (weight not less than 13 .. 50 kg I sqm) | 8.65 | Sqm | |
| 4 | 4 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions ofengineer-incharge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. \n | 9.65 | Sqm | |
| 5 | 5 | Providing and fixing cup board shutters with 25mm thick veneered particle board IS: 3097 marked exterior grade (Grade I) of approved make including second class teak wood lipping of 25mm wide x 12mm thick with necessary screws and bright finished stainless steel piano hinges complete as per directions of engineer-in-charge With non decorative veneering on both side. | 26.96 | Sqm | |
| 6 | 6 | Providing and fixing roller channel for drawer slidder 24'' including all complete job. | 16 | No | |
| 7 | 7 | Providing and fixing aluminum handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour and shade with necessary screws etc complete 200 mm. | 21 | No | |
| 8 | 8 | Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised ( anodice coating not less than grade AC 10 as per IS: 1868 ) aluminium lever handles with necessary screws etc complete best make of approved quality. | 21 | No |
AI Tender Summary
Tender Timeline
Feb 26, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 02, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 04, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
Completed