| 1 | 1 | Setting out(i) Construction of Reference & Working Benchmark = 2 Nos. & 7 Nos. RespectivelySOR Item No.-1.16 | | 1.648 | Per Km. |
|---|
| 2 | 2 | (ii) Construction of Reference Pillars/Burjees = 66 NosSOR Item No.-1.16 | | 1.648 | Per Km. |
|---|
| 3 | 3 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.SOR Item No.-2.2 | | 0.49 | Hectare |
|---|
| 4 | 4 | Excavation for roadway in soil using manual means for carrying of out earth to embankment site with a lift up to 1.5 m and lead up to 50m as per Technical Specification Clause 302.3.SOR Item No.-3.5 (I) | | 159.71 | cum |
|---|
| 5 | 5 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5.SOR Item No.-3.3 | | 159.71 | cum |
|---|
| 6 | 6 | Construction of embankment with approved material obtained from borrow pits with a lift up to 1.5m transporting to site, spreading grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead up to 1000 m as per Technical Specification Clause 301.5SOR Item No.-3.4 | | 2830.94 | cum |
|---|
| 7 | 7 | Construction of embankment with approved material obtained from borrow pits with a lift up to 1.5m transporting to site, spreading grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead up to 100 m as per Technical Specification Clause 301.5SOR Item No.-3.5 (ii) | | 707.74 | cum |
|---|
| 8 | 8 | Construction of granular sub-base by providing well graded material (Grading I) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 401SOR Item No.-4.1.401(Aii) | | 933.46 | cum |
|---|
| 9 | 9 | WBM Grading 3\nProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.80 -100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.SOR Item No.-4.7 (3)(A) | | 468.14 | cum |
|---|
| 10 | 10 | Prime Coat\nProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502SOR Item No.-5.1 (i) | | 6241.8 | sqm |
|---|
| 11 | 11 | Tack Coat\nProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 50SOR Item No.-5.2 (iii) 503 | | 6241.8 | sqm |
|---|
| 12 | 12 | Mix Seal Surfacing\nBy Mechanical Means (Type-B)\nProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509SOR Item No.-5.11 | | 6241.8 | sqm |
|---|
| 13 | 13 | Earthwork excavation for foundation of structures as per drawing and teachnical specification clause 1104 includding setting out, stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved matefial . (A)Ordinary soil SOR Item No.-11.1 (I) | | 14.7 | CUM. |
|---|
| 14 | 14 | Bedding for Type - B PCC(M20) Bedding Laying (First Class ) bedding concrete as per clause 1105 (ii)SOR Item No.-9.2 | | 2.63 | Cum |
|---|
| 15 | 15 | Kilometre Stone\nReinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703\nOrdinary Kilometer Stone (Precast)SOR Item No.-10.10 ii) | | 2 | Cum |
|---|
| 16 | 16 | Providing and laying reinforced cement concrete pipe NP4 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapaets clause 1106. SOR Item No.-9.3(C) | | 37.5 | m |
|---|
| 17 | 17 | Kilometre Stone\nReinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 SOR Item No.-10.1(III) 200m Stone (Pre-cast) | | 7 | No. |
|---|
| 18 | 18 | Boundary Pillar\nReinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704At outer side of H-Curve & @ 1.50m c/c both side at heigh embankment SOR Item No.-10.11 | | 25 | No. |
|---|
| 19 | 19 | Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 SOR Item No.-10.16 | | 2 | No. |
|---|
| 20 | 20 | Maintenance Board | | 1 | No. |
|---|
| 21 | 21 | MMGSY Logo Board | | 1 | No. |
|---|
| 22 | 22 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 SOR Item No.-10.2 A (1)(ii) 600 mm equilateral triangle | | 10 | No. |
|---|
| 23 | 23 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 SOR Item No.-10.2 A (1)(Viii) Speed Limit (600 MM Circular) | | 4 | No. |
|---|
| 24 | 24 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 SOR Item No.-10.2 A (1) (v) 600 mm x 450 mm rectangular | | 4 | No. |
|---|
| 25 | 25 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 . The finished surface to be level , uniform and free from streaks and holes. SOR Item No.-8.13 | | 329.6 | sqm |
|---|
| 26 | 26 | Rumble Strips (Provision of 15 nos rumble strips covered with MSS bituminous carpet,\n15-20 mm high at center, 250 mm wide placed at 1 m center to center at approved locations to control\nspeed, marked with white strips of road marking paint.) | | 78.75 | sqm |
|---|
| 27 | 27 | Planting of Trees and their Maintenance for one Year\nPlanting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one | | 82 | Each |
|---|
| 28 | 28 | Add 1% Labour Cess | | 1 | No |
|---|
| 29 | 29 | Add 12% GST | | 1 | No |
|---|
| 30 | 30 | Add 10% Seigniorage Fee | | 1 | No |
|---|
| 31 | 31 | Maintainance for 1st year | | 1 | Year |
|---|
| 32 | 32 | Maintainance for 2nd year | | 1 | Year |
|---|
| 33 | 33 | Maintainance for 3rd year | | 1 | Year |
|---|
| 34 | 34 | Maintainance for 4th year | | 1 | Year |
|---|
| 35 | 35 | Maintainance for 5th year | | 1 | Year |
|---|
| 36 | 36 | Add 1% Labour Cess | | 1 | No |
|---|
| 37 | 37 | Add 12% GST | | 1 | No |
|---|
| 38 | 38 | Add 10% Seigniorage Fee | | 1 | No |
|---|
