Panchayat Raj Department has published Park And Open Gym At Mogra Khurd. Submission Date for this Tender is 02-03-2021. Gardening Tenders in Gram Panchayat Mogara Kalla Panchayat Samiti Luni Rajasthan. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of Public Park and Open GYM at Mogra Khurd | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Items : | |||
| 2 | 1.01 | LOOP RUNG CLIMBER\nThis is another kind of item that provides hanging experience to the children. The frame is fabricated out of 40 NB and 25 NB powder coated GI pipes. There are 09 triangular loops made from 15 NB, which are welded to the top pipe of the frame. The top pipe is made out of 80 NB GI pipes. The ladder used is designed to the side support pipe itself. High tensile steel galvanized Nuts, Bolts & Washer are used for assembly. The swing should be made in multi colour .The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness. foundation of the equipment should be 2feet 2feetx3 feetdeep with heavy M.S. Pipe grout with cc 1:1.5:3 including curing and compaction as per direction given by engineer incharge. | item1 | 1 | Nos |
| 3 | 1.02 | TWO SEATER ARCH SWING\nThe leg supports of the double post swing is made up of 50 NB while the top bar is of 50 NB GI pipes. The GI pipes are powder coated. The seats of the single support swing are made up of 10 mm thk rubber with anti skid. The rubber seat is suspended on 6mm thk GI chain. The ball bearings are mounted inside a specially designed nylon clamp. The swing should be made in multi colour High tensile steel galvanized Nuts, Bolts & Washer are used for assembly. The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness. . foundation of the equipment should be 2feet 2feetx3 feetdeep with heavy M.S. Pipe grout with cc 1:1.5:3 including curing and compaction as per direction given by engineer incharge.\n\n\n | item2 | 1 | Nos |
| 4 | 1.03 | MULTI SEATER SEE - SAW \nThe GI See saw comprises four FRP seats. The lever is consisted of 20 nb and 80 nb powder coated GI pipes. The bearing used in this item is heavy duty nylon bush type. The stand for see saw is made using 50 NB GI pipe. *High tensile steel galvanized Nuts, Bolts & Washer are used for assembly. The swing should be made in multi colour .The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness. . foundation of the equipment should be 2feet 2feetx3 feetdeep with heavy M.S. Pipe grout with cc 1:1.5:3 including curing and compaction as per direction given by engineer incharge.\n | item3 | 1 | Nos |
| 5 | 1.04 | FIBER WAVE SLIDE [2.1 METER] \n In this innovative product, the wave part is made from fiberglass-reinforced plastic giving it a mirror image. The thickness of the wave slide is 5mm thick. The center support of the slide is of 50 NB powder coated GI pipe. The support structure of the slide is made up of 25 NB powder coated GI pipe. *High tensile steel galvanized Nuts, Bolts & Washer are used for assembly. The swing should be made in multi colour .The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness. . foundation of the equipment should be 2feet 2feetx3 feetdeep with heavy M.S. Pipe grout with cc 1:1.5:3 including curing and compaction as per direction given by engineer incharge.\n | item4 | 1 | Nos |
| 6 | 1.05 | HALF CIRCLE CLIMBER\nThis is another kind of item that provides hanging experience to the children. The frame Of Half circle should be fabricated out of 50 NB GI C Class pipe attech with hanging pipes. There are 12 triangular U made from 20 NB GI PIPE which are welded to the Circular frame. *High tensile steel galvanized Nuts, Bolts & Washer are used for assembly. The swing should be made in multi colour .The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness. . foundation of the equipment should be 2feet 2feetx3 feetdeep with heavy M.S. Pipe grout with cc 1:1.5:3 including curing and compaction as per direction given by engineer incharge.\n\n | item5 | 1 | Nos |
| 7 | 1.06 | FOUR SEATER M.G.R. (Merry go round)\nProviding and fixing all vertical pipes (Legs) of playing in a ground by doing excavation Four Seater M.G.R. (Merry go round) Play Equipment made from “B” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimetres. :: *The main frame is made up of F40mm NB “B” class G.I. pipe which is welded to M.S. round plate of F250 X10 mm thickness. This main frame supported by F32mm NB “B” class G.I. pipe. \nThe M.G.R. stand is made from F80mm NB “B” class G.I. pipe. :: *For M.G.R. “6209” and “30209” bearings are used which are of reputed make.The seats attached shall be made out of best quality F.R.P. material in attractive shape with attractive colours. These seats are safely mounted on bend pipe of F20mm NB “B” class G.I. bend pipe and M.S. flat of 40X5mm. The swing should be made in multi colour .High tensile steel galvanized Nuts, Bolts & Washer are used for assembly. The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness. . foundation of the equipment should be 2feet 2feetx3 feetdeep with heavy M.S. Pipe grout with cc 1:1.5:3 including curing and compaction as per direction given by engineer incharge.\n | item6 | 1 | Nos |
| 8 | 1.07 | A-B CLIMBER A-B CLIMBER\nHeight 9 feet from the ground and length 12 feet. This is kind playing item for children 6 to 8 children at a time can play in this climber and also provide hanging experience to the children. 15 loops should be made in the letter A while the bridge should me made up of 8 loops and B should be made in 22 loops. With proper welding for the long durability of equipment. The frame is fabricated out of 50 NB powder coated GI pipes. There. High tensile steel galvanized Nuts, Bolts & Washer are used for assembly. The swing should be made in multi colour The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness. . foundation of the equipment should be 2feet 2feetx3 feetdeep with heavy M.S. Pipe grout with cc 1:1.5:3 including curing and compaction as per direction given by engineer incharge.\n | item7 | 1 | Nos |
| 9 | 1.08 | ROLLER SLIDE [2.1 METER] \n The rollers should be made up of LLDP plastic in different colour of good quality for the long durability . two supporting H shape foundation should be attach at the bottom of the slide. The structure of the slide should be made up of rectangle M.S pipes with 25 nb supporting handle pipe. The center support pipe of the structure should be made up of 80 NB GI C class pipe. The ladder of the slide is made up of 25 NB GI pipe. High tensile steel galvanized Nuts, Bolts & Washer are used for assembly. The swing should be made in multi colour .The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness. . foundation of the equipment should be 2feet 2feetx3 feetdeep with heavy M.S. Pipe grout with cc 1:1.5:3 including curing and compaction as per direction given by engineer incharge.\n | item8 | 1 | Nos |
| 10 | 1.09 | SEATED PUTTER\nDimension – 1776mm (length) x 685 mm (width) x 2260 mm (Height)\nSafe Area – 3 Mtr. x 1.25 Mtr.\nSeated Putter equipment is made of form MS Pipe of different No. NB stands for nominal bore sizes i.e. internal diameter of pipe in millimeters.\nThe Central main frame is made up of combination of @ 90 mm x 3 mm & 100 mm x 50 mm MS Pipe and Cr sheet (20”x12”) of 16 gauge for support & display.\nBottom frames is made up of @ 90 mm x 3 mm thick MS Pipe.\nAll linkages, handle frames and seat frame and made up of @ 50 mm pipe of heavy gauge.\nThe seat frame is made up of (100 mm x 50 mm) MS pipe in L & trapezium shape of support.\nTo build structure bushes are used which are made form M.S. seamless pipe of 63 mm O.D. and 10 mm thickness.\nThe bearing used are ball bearing 6205 zz permanent lubricated seated bearing of reputed brand.\nThe main frame and the linkage are fixed on the 10 mm thick plate, the bearing shaft of @ 25 mm dia if fixed on the capsule hole on the ends and covered with 70mm & 10 mm thick plate, this cover is designed in such & way that it should cover the outer portion of the shall and fixed by the spring lock and the high tensile steel with galvanized bolls. Same on each every linkage joint.\nSeat and back rest provided are made up of CR MS sheet, the sheet is supported by the heavy gauge channel, the sheet has sheet has uniform border with no joints.\nHigh tensile sheet with galvanized nuts and bolls are sued for assembly.\nThe specialized powder coating of texture color in used.\nThe foundation used for fixing the one side of bottom frame is made from the combination of 6 rod and the 2 thick plate (228.6 mm & 8 mm) the rod is 760mm long and ¾” thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these 6 rods are welded to together with support 35mm x 35 mm MS angle of 5 mm thickness and the adjustment is done by the nuts. Same to be done on other side.\nThe cerclips used for assembly are of A24 mm.\nAll the ends of the structure are closed and property welded.\nOne and of seal frame is fixed with high tensile rubber.\n | item9 | 1 | Nos |
| 11 | 1.1 | TRIPLE TWISTER.\nDimension – 1980mm (length) x 1980 mm (width) x 2080 mm (Height)\nSafe Area – 2.5 Mtr. x 2.25 Mtr.\nTriple twister equipment is made of form MS Pipe of different No. NB stands for nominal bore sizes i.e. internal diameter of pipe in millimeters.\nThe Central main pipe is @ 115 mm x 5 mm thick MS Pipe.\nThe Bottom of central pipe is welded with support of MS round plate @ 225 mm & 8 mm thick. \nThe bottom of frame if made from 90 mm x 3 mm thick MS pipe each bottom frame are connected to central pipe with two half curved shaped MS flat ( 100 mm x 203 mm)\nThe handle frame is of 35 OD x 3 mm thick made form MS pipe is capsule shapes.\nThere is hole of 25mm on base plate for the adjustment the level of the equipment.\nPins sued of diameter, 35mm are made from SAE 6620 bright material there are two types of bearing used tapered bearing and ball bearing (6306 zz permanent lubricated seated bearing) of reputed brand the whole console of pins is designed in lock and key and the special TT spring lock pattern is sued so that the bearing and the plate console cannot be take out there will be special spring lock between the bearing block safety.\nHigh tensile sheet with galvanized nuts and bolls are sued for assembly.\nThe specialized powder coating of texture color in used.\nThe foundation used for fixing the central pole made from the combination of 3 rod and the @ 225 mm &6 mm thick M.S. Plate the rod is 760 mm long and ¾” thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these three rods are welded to together with 35mm x 35 mm MS angle of 5 mm thickness. \nThe top ends of the structure are closed and property welded.\nThe twister plate are made from @ 350 mm x 6 mm thick chakkar plate the border cover of plate is 50 mm x 6 mm thick M.S. flat and the base of the twister plate is welded with special pin console (@60 mm & 15 mm thickness) and with the flat for support.\nThe bottom of the bottom frame is welded with support if T shaped C channel heavy gauge (76 mm x 38 mm)\n | item10 | 1 | Nos |
| 12 | 1.11 | PARALLEL BAR DIPS\nDimension – 1700mm (length) x 685 mm (width) x 1930 mm (Height)\nSafe Area – 2 Mtr. x 1 Mtr.\nParallel bar dips equipment is made of form MS Pipe of different No. NB stands for nominal bore sizes i.e. internal diameter of pipe in millimeters.\nThe Central main frame is made up of combination of (@ 90 mm x 3 mm & 100 mm x 50 mm) MS Pipe and Cr sheet (20x12) of 16 gauge for support & display.\nBottom frames is made up of (@ 90 mm x 3 mm) thick MS Pipe. 1676 mm long & 279 mm height.\nThe linkage handle for the parallel bar dips are made up of @ 50 mm MS pipe of heavy gauge. Both the side handles are kept of different level so that everyone can used it at one end handle should be at 1641 mm height from the base frame and other at 914 mm height from the base frame.\nHigh tensile sheet with galvanized nuts and bolls are sued for assembly.\nThe specialized powder coating of texture color in used.\nThe foundation used for fixing the one side of bottom frame is made from the combination of 6 rod and the 2 thick plate (228.6 mm & 8 mm) the rod is 760mm long and ¾” thick and at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these 6 rods are welded to together with support 35mm x 35 mm MS angle of 5 mm thickness and the adjustment is done by the nuts. Same to be done on other side.\nAll the ends of the structure are closed and property welded.\n | item11 | 1 | Nos |
| 13 | 1.12 | ABODMINAL BOARD\nDimension – 1730mm (length) x 1778 mm (width) x 1496 mm (Height)\nSafe Area – 2.5 Mtr. x 2 Mtr.\nThe Abdominal Board equipment is made of form MS Pipe of different No. NB stands for nominal bore sizes i.e. internal diameter of pipe in millimeters.\nThe Central main frame is made up of combination of @ 90 mm x 3 mm & 100 mm x 50 mm MS Pipe and Cr sheet (20”x12”) of 16 gauge for support & display.\nThe frame of sit up board of having boundary of 25.4 mm MS pipe and capsule MS pipe (63 mm x 25.4mm) placed horizontally though out the frame the sit up board is supported by (100mm x 50mm) MS pipe.\nThe remaining frame of sit up board is made up to combination of MS pipe (90 mm x 3 mm thick) as pitters set up certain degree & (100 mm x 50mm) MS pipe for supporting the main frame and the sit up board frame the leg support is made of (@90 mm x 53 mm) MS pipe long are joint together the capsule pipe (65mm) ends of the leg support should be covered with AB5 covering.\nThe bottom of central frame is supported by MS round plate of @ 228.6 mm & 8 mm thick.\nThe foundation used for fixing the one side of bottom frame is made from the combination of 6 rod and the 2 thick plate (228.6 mm & 8 mm) the rod is 760mm long and ¾” thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these 6 rods are welded to together with support 35mm x 35 mm MS angle of 5 mm thickness and the adjustment is done by the nuts the support poles is fixed by four T shaped C channel heavy gauge (76 mm x 35 mm), there are holes of 25 mm on base plate for the adjustment of level the equipment.\nHigh tensile sheet with galvanized nuts and bolls are sued for assembly.\nThe specialized powder coating of texture color in used.\nAll the ends of the structure are closed and property welded.\n\n | item12 | 1 | Nos |
| 14 | 1.13 | LEG PRESS \nDimension :- 2220 mm (length ) X685 mm (width) X2311 mm (height)\nLeg press equipments is made from MS pipe of different NB, NB stands for nominal bore sizes i.e. internal diameter of pipe in milimeter . The main frame is of 90 mm x3 mm thick & 100 mm x 50 mm Ms Pipe and CR sheet (20"x12") of 16 gauge for support and display.\nThe bottom of central frame is welded a pair of support of MS round plate of 225 mm and 8 mm thick for maintaining the posture the rubber handle is placed on the on the main sleeve frame on 25.4 NB . \nThe sleeve frame is made up of 63.5 NB, this sleeve can be disassembled from main frame the sleeve frame is supported by 63.5 NB from top and 50.8 NB from mid.\nThere are holes of 25 mm on base plate for the adjustment of level of the equipment .\nFoot rest in made up of combination of chakkar plate and flat (30.48 mm) is welded on the border.\nThe foot rest (150 mm x350 mm) is fixed on the MS frame of (100x50 mm) the MS frame is made little tapered .\nThe bearing used are ball bearing 6205 permanent lubricated sealed bearing of reputed brand.\nThe pins used are made up of 25 mm SAE8620 bearing material.\nTo build structure bushes are used which are made from MS seamiess pipe of 80 mm O.D. and 10 mm thickness seat and back rest provided are made up of CR MS sheet is supported by the heavy gauge channel the sheet has uniform border with on joints .\nHigh tensile steel with galvanized nuts and bolts are used for assembly.\nThe speclalized powder coating of texture colour is used.\nThe foundation used for fixing the main frame is made from the combination of 12 rod and the 4 thick plate (228.6mmx8 mm) the rod is 760 mm long and 3/4" thick and at the one end on the rod BSW threading is done for the adjustment of the level of the main frame this 12 rods are welded together with support 35 mm x35 mm MS angle of5 mm thickness and the adjustment is done by the nuts.\nThe main frame and the sleeve are fixed on the 10 mm thick plate the bearing shaft of 25 mm dia is fixed on the capsule hole on the ends and covered with 70 mm and 10 mm thick plate this coverd is designed in such a way that is should cover the outer portion of the shaft and fixed by the spring block and the high tensile steel with galvanized bolts .\nAll the ends of the structure are closed and properly wealded .\nOne end of sleeve3 frame is fixed with high tensile rubber .\nThe cerclips used for assembly are of A24 mm .\n | item13 | 2 | Nos |
| 15 | 1.14 | AIR WALKER\nDimension – 2501mm (length) x 75 mm (width) x 2095 mm (Height)\nSafe Area – 2.5 Mtr. x 1.5 Mtr.\nThe air equipment is made of form MS Pipe of different No. NB stands for nominal bore sizes i.e. internal diameter of pipe in mm.\nThe Central main frame is made up of combination of @ 90 mm x 3 mm & 100 mm x 50 mm MS Pipe and Cr sheet (20”x12”) of 16 gauge for support & display. The pillars of main frames is made up of @ 90 mm x 3 mm thick MS Pipe.\nthe sleeve frame is made up of 63.5 MB, this sleeve can be disassemble from main, the sleeve is supported with flat and o 63 mm MS pipe from the top and at the other end foot rest is attached with two flat (254 mm x 63 mm)\nThe MS pipe of dia 50 mm is bended in C from to attach the main frame and pillars.\nThe foot rest (152 mm x 365 mm) is fixed on the sleeve frame, foot rest is made up of combination of chakkar plate & flat (30.48 mm ) is welded on border.\nThe main frame and pillars are attached with supporting pillars dia 50 mm MS pipe. For safety and supporting reasons.\nThe foundation used for fixing the one side of bottom frame is made from the combination of 6 rod and the 2 thick plate (228.6 mm & 8 mm) the rod is 760mm long and ¾” thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these 6 rods are welded to together with support 35mm x 35 mm MS angle of 5 mm thickness and the adjustment is done by the nuts & the support pillars. The foundation used for fixing the supporting pillars is fixed by four T shapes C channel heavy gauge (75 mm x 35 mm ) and all the T shaped C channel are joined together with support 35 mm x 35 mm MS angle of 5 mm thickness.\nTo build structure bushes are used which are made form M.S. seamless pipe of 63 mm O.D. and 10 mm thickness.\nThe bearing used are ball bearing 6205 zz permanent lubricated seated bearing of reputed brand.\nHigh tensile sheet with galvanized nuts and bolls are sued for assembly. The specialized powder coating of texture color in used.\nThe specialized powder coating of texture colour is used. All the ends of the structure are closed and property welded.\n | item14 | 2 | Nos |
| 16 | 1.15 | CROSS WALKER\nDimension – 1930mm (length) x 990 mm (width) x 1778 mm (Height)\nSafe Area – 2.5 Mtr. x 1.5 Mtr.\nThe cross walker equipment is made of form MS Pipe of different No. NB stands for nominal bore sizes i.e. internal diameter of pipe in millimeters.\nThe main frame is made up to combination @ 90 mm x 3 mm & 100 mm x 50 mm MS Pipe and Cr sheet (20”x12”) of 16 gauge for support & display & the supporting frame is made up of combination of @ 90 mm x 3 mm thick MS pipe & 100 mm x 50 mm MS pipe, both the main frame and supporting frame are joined together thought 100 mm x 50 mm MS pipe.\nThe Handle frame is made up to @ 50 mm MS pipe & 35 mm MS pipe.\nTo build structure bushes are used which are made form M.S. seamless pipe of 63 mm O.D. and 10 mm thickness. The linkage frame consist of portion, Each portion is made up of combination MS pipe (50 mm square) and MS flat (50 mm x 6 mm thick) on both the side and The foot rest (152 mm x 368 mm) is fixed out he both the ends of each portion, foot rest is made up combination of chakkar plate & flat (30.48mm) is welded on the border.\nThe linkage frame and the handle are fixed on the 571 mm x 6 mm thick plate, the bearing shaft of 25 mm dia is fixed on the capasule hole on the ends of thick plate and convered with 70 mm & 10 mm thick plate, this cover is designed in such a way that is should cover the outer portion of the shaft and fixed by the spring lock and the high tensile stool with galvanized bolls. Same on each every linkage joint.\nThe foundation used for fixing the one side of bottom frame is made from the combination of 12 rod and the 4 thick plate (228.6 mm & 8 mm) the rod is 760mm long and ¾” thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these 12 rods are welded to together with support 35mm x 35 mm MS angle of 5 mm thickness and the adjustment is done by the nuts & the support pillars. The foundation used for fixing the supporting pillars is fixed by four T shapes C channel heavy gauge (75 mm x 35 mm ) and all the T shaped C channel are joined together with support 35 mm x 35 mm MS angle of 5 mm thickness.\nTo build structure bushes are used which are made form M.S. seamless pipe of 63 mm O.D. and 10 mm thickness.\nThe bearing used are ball bearing 6205 zz permanent lubricated seated bearing of reputed brand.\nHigh tensile sheet with galvanized nuts and bolls are sued for assembly. The cerclips used for assembly are of A24 mm.\nThe specialized powder coating of texture color in used. All the ends of the structure are closed and property welded.\n | item15 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
