Name of Work : -Augmentation of various tube wells under AE (E&M)-III.
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
Lifting of equipments from the bore and replacement of damaged parts, pipes, cable, clamp, tail piece, end , nut bolts etc and again lowering of the equipments with the help of manpower and chain pulley taking all safety measures. Replacement of all faulty electrical parts and motor protection unit upto the satisfaction of Engineer in charge at the following sites:- 1. 1.Bijwasan T/Well at Grewal Chowk \n2. Bijwasan T/Well at Harijan Choupal 3. Bijwasan T/Well near Vijay House 4. Bijwasan T/Well in BPS 5. Mahipalpur T/Well near CISF Camp Harijan Basti 6.Mahipalpur T/Well at Mata Chowk\n
item1
6
Jobs
2
2
S/O PVC insulated PVC sheathed flat submersible cable with plain copper conductor having three core 4 sq mm 415/1100V (each roll 100 mtr) Make :- Fort Gloster/ICL/CCI/ICC/Universal/Grandlay
item2
2
rolls
3
3
Making/supply of 50mm, 3 mtr long approx double flanged (OD 130mm)GI Pipe,medium conforming to IS:1239(2004)SWS,B Class having 3 No L-Type brackets duly welded on each side of flange. The flanges having four holes and One cut for cable. Make- TATA/Jindal Hisar
item3
70
Nos.
4
4
Making/supply of 40mm, 3 mtr long approx double flanged (OD 130mm)GI Pipe,medium conforming to IS:1239(2004)SWS,B Class having 3 No L-Type brackets duly welded on each side of flange. The flanges having four holes and cut for cable. Make- TATA/Jindal Hisar
item4
50
Nos.
5
5
G.I tail piece 50 mm dia 0.5 mtr. Long with one end threaded & other end flanged having 3 No L-Type brackets duly welded with flange having 4 Nos. hole & cut for cable.
item5
6
No.
6
6
Supply of Electrical feedet Pillar Hut Type made out of MS Sheet on angle iron of 40x40x5 mm thick, tentative size of panel 1500x750x350 mm made out of suitable size angle iron & MS Sheet with door and nterlocking arrangement duly painted having the following items : Internal wiring with suitable size of copper conductor wire as per IER , Main Switch 63A,415V - 01 No. (Make:-Havels/C&S/L&T/ DJB Approved), Fully Automatic Star Delta Oil Immerssed type Starter upto 15HP induction motor- 01No.(Make:- Bentax/L&T/Advance/DJB Approved) Ampere Meter 0-30 A, 96x96 mm-01No. (Make:- AE/EE) Volt Meter 0-500V, 96x96 mm - 01No. (Make:- AE/EE) Indicating Lamp Set RYB Set of 3Nos Shunt Capacitor of 5KVAR -01 No. (Make:- Epcos/Jyoti/L&T/DJB Approved). Selector Switch for Voltmeter- 01 No , Motor Protection assembly having dry run protection , Earth leakage single phase protection, High Voltage, Phase sequence character, Overload time relay protection, Power on programmable time switch i.e, RYB phase facility to change from auto to manual & Vice versa upto 15HP - 01No (Make :-Gain Guard/Pious/DJB Approved)
item6
3
Nos.
7
7
Rubber gaskets 50 mm dia.
item7
300
No.
8
8
S/O nut bolts of size ½\"x2\" long M.S Make:- A-one/ISI mark
item8
100
Kg
9
9
F/S of MS bore cover suitable for 200mm dia MS Pipe. The bore well be fabricated with MS flat size 50mm width 5mm thickness and MS sheet 18SWG in 2 half pieces i/c suitable clamping arrangement having internal hole as per requirement
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
