Construction Of Frp Hut For Op Chumar Bop Of 37Th Bn Itbp Leh
Tender Value
15.49 Lakhs
Estimated cost
Bid Submission
04 Mar 2021
0 days left
EMD
30983
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
C/O FRP Hut for OP Chumar BOP of 37th bN itbp Leh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Frp Hut For Op Chumar Bop Of 37Th Bn Itbp Leh
BOQ
| Name of Work: C/o FRP Hut for Observation Post at BOP Chumar of 37th BN ITBP Leh. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil | 1 | 49 | sqm |
| 2 | 1.02 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | 2 | 10.22 | cum |
| 3 | 1.03 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 3 | 9.78 | cum |
| 4 | 1.04 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources). | 4 | 2.68 | cum |
| 5 | 1.05 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). | 5 | 6.11 | cum |
| 6 | 1.06 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) | 6 | 10.17 | cum |
| 7 | 1.07 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Exposed on walls PN - 16 Pipe, 20mm OD (SDR-7.4) | 7 | 10 | metre |
| 8 | 1.08 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Exposed on walls PN - 16 Pipe, 40mm OD (SDR-7.4) | 8 | 20 | metre |
| 9 | 1.09 | Providing and fixing PPR Unions PPR Union 20mm | 9 | 2 | each |
| 10 | 1.1 | Providing and fixing PPR Unions PPR Union 40mm | 10 | 2 | each |
| 11 | 1.11 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore | 11 | 2 | each |
| 12 | 1.12 | Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms | 12 | 2 | each |
| 13 | 1.13 | Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | 13 | 2 | each |
| 14 | 1.14 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms | 14 | 1 | each |
| 15 | 1.15 | Providing and erection of 01 No FRP Shelters (Barrel Type Cabin) consisting of Curved panel type FRP shelter of size 4880 mm x 4880 mm to be from side entry chamber of size 2387 mm x 1220 mm and height of 2440 mm - As per Drawing and specification attached in Appendix-A. The cost including transportation upto site and inclusive all taxes, erection , commsssioning etc. complete in all respect. | 15 | 1 | Job |
| 16 | 1.16 | Proving and placing on Terrace (at all floor level) PUF(Poly-propylene foam) minimum 5 Layeerer thickness of 80 mm at any point of water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings ang the base support for tank.\r\n | 16 | 2500 | Ltrs. |
| 17 | 1.17 | Providing and installation/erection of prefabricated - Insulated Toilet cabin of size 4'x4' ( inner size) with following specification :- Technical Specification Corner Post:- Corner vertical post made with Square hallow section and corner post will be suitably welded /joint with nut bolts to the base structure. Corner Vertical post will house the Lifting hook.\r\nBase Structure/Skid :- The total super structure will be made with 75 X 40 section as longitudinal member and both traverse and intermediate longitudinal members and purlins are of ISMC 75 x 40. All should be erceted with nuts and bolts \r\nFlooring :- Flooring will be of 12mm fiber cement board fixed to the Base structure by fastener’s above that p.c.c. will be laid to fix the seat \r\n Wall :- 50mm thick Puff insulated panel shall be made with 0.5mm thick micro ribbed PPGI sheet of Colour RAL 9002 on both sides.\r\nInsulation:-Rigid Polyurethane foam of density 40 kg/Cm3,CFC Free ,K value of foam will be 0.02 W/m2 deg K per Hour,Fire resistance As per BS 4735 Horizontal Burn<125mm\r\nRoof :- 50mm tick puff insulated panel shall be made with 0.5mm thick PPGI sheets on both sides with double side slope. \r\nDoors & Ventilator:- Door of size 1800 x 800mm front side of the cabin and canopy’s will be provided for the door.\r\nToilet Accessories:-One steel pan grade 304 Indian type with trap and connection pipe 4\" dia to septic tank, White Vitreous China Flat back wash basin size 450x300 mm with PVC waste pipe and proper plumbing waste pipe and drain water line from the cabin will be provided.\r\n NOTE :- Rate should include laying charges , excavation of earth, laying p.c.c. 1:5:10 in base & connection at site including all taxes at Petrol base of point no 54/55 of 37 Bn I.T.B.Police Leh. | 17 | 1 | Set |
| 18 | 1.18 | Supply of PWTS-AM-160-01 series Polyethylene Tank which is an advance version of Septic Tank with capacity of 1200 liter per day along with soak pit 1200 L, diameter of 1440 mm and height of 1550 mm. Tank has three zone, first zone is septic zone where sludge is stabilized by anaerobic digestion. Second zone is sedimentation zone and the third zone is pall ring media zone and Fourth Zone is Soak Pit having surface area of 190 Sq.mt / Cum and retain micro-organism long enough to digest the organic waste which results in 70% of BOD reduction from final out let. It provided with inlet & outlet pipe of 100 mm dia., Vent pipe of 50 mm dia, Internal piping, manhole cover of 400 mm dia. NOTE :-Rate should include transportation charges , laying charges , excavation of earth for septic tanks & soak pits, laying p.c.c. 1:5:10 in base & connection at site including all tex at Petrol base of point no 54/55 of 37 Bn I.T.B.Police Leh. | 18 | 1 | Set |
| 19 | 1.19 | Providing, installation , Testing and commissioning of 1 kw luminious solar system with 1500 VA solar inverter, 2 NO x 150 Ah solar battery, 3NO X 335 Watt solar panel, GI structure including complete required accessories with GST, Transportation upto site and installation and commissioning complete in all respect. with 5 year warranty of battery and 25 year warranty on solar panels. solar panel should be mono crystaline type. Battery should be luminious solar 150 Ah with C-10 rated tubuler battery based on tubuler technology and have deep cycled design. (Battery model no. LPT 12150 H) 12 V lead acid battery.\r\nSolar inverter;- Brand Luminious 1500 VA rating 24Volt shine wave type with minimum 2 year warranty.\r\nGI mounding structure should be GI made , DC wire 40 X 4 Sqmm and connector 4xY connector.\r\nAll other required accessories should be as per MNRE specification . | 19 | 1 | Set |
| 20 | 1.2 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A | 20 | 7 | Point |
| 21 | 1.21 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way , Double door | 21 | 1 | Each |
| 22 | 1.22 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole | 22 | 2 | Each |
| 23 | 1.23 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A | 23 | 1 | Each |
| 24 | 1.24 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm | 24 | 20 | Metre |
| 25 | 1.25 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) | 62 | 20 | Metre |
AI Tender Summary
Tender Timeline
Feb 22, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 04, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 05, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender