||Providing ,Laying ,spreading and compacting stone aggregates of 22.4-53mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening to fill up the nterstices of coarse aggregate ,watering and compacting to the required density
||Construction of embankment/Shoulder with approved material obtained from avaible land as permitted and approved by Engineer-in-charge and as per Technical Specification Clause 301.3.4.1 with all lifts and leads, spreading, grading to required slop and compac(With out Roylty) SI no 253
||Brick edging on both sides of the road with M-150 bricks 8 cm wide and12 cm deep laid with mud mortar including cost of bricks all labour finished to be required template and in proper alignment T&P and also including dressing and ramming the excavated earth as per direction of Engineer in Charge. (SINo. 765)
||Providing and Laying Brick soling \npavement with straight over burnt bricks laid on edge and dry including preparation of subgrade to prescribed cambar and filling joint with local earth spreading binding coat of 1cm depth of local earth over the entire surface including cost of brick labour T&Petc .Required for proper completion of the work and as per direction of E/I
||Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.75kg/sqm usingmannual means .
||Providing laying & rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line ,grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant ,laying and rolling with a three wheel 80-100 KN static roller capacity finished to required level and grades to be followed by seal coat .
||Providing and applying tack coat withbitumen VG-10 using Bitumen distributor at the rate of 0.35 kg per sqm on the prepared surface cleaned with hydraulic broom .
||Providing and laying seal coat 'C' Type sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall .
||Supply and Fixing Sign board ,reflective type with mild steel as per direction of Engineer-in -charge.