| 1 | 1 | Pond and tank | BI01010001010000000000000515BI0100001113 | | |
|---|
| 2 | 1.001 | 2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil | BI01010001010000000000000515BI0100001114 | 124.191 | cum |
|---|
| 3 | 1.002 | 2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | BI01010001010000000000000515BI0100001115 | 13.26 | cum |
|---|
| 4 | 1.003 | 2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil | BI01010001010000000000000515BI0100001116 | 71.534 | cum |
|---|
| 5 | 1.004 | 60.2.2 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete | BI01010001010000000000000515BI0100001117 | 48 | hour |
|---|
| 6 | 1.005 | 4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001118 | 2.55 | cum |
|---|
| 7 | 1.006 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | BI01010001010000000000000515BI0100001119 | 5.464 | sqm |
|---|
| 8 | 1.007 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001120 | 16.7 | cum |
|---|
| 9 | 1.008 | 5.9.12 : Centering and shuttering including strutting, etc. and removal of form for:Well steining | BI01010001010000000000000515BI0100001121 | 201.212 | sqm |
|---|
| 10 | 1.009 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001122 | 850 | kilogram |
|---|
| 11 | 1.01 | od1069042/2020_2021 : Supplying and laying 40mm dia 10kg/cm2 HDPEpipe including specials and all fitting charges but excluding trenching and refilling etc complete | BI01010001010000000000000515BI0100001123 | 175 | metre |
|---|
| 12 | 1.011 | od1068990/2020_2021 : Supplying and fixing centralized distribution system with GI pipe holder- rate for one distribution tap | BI01010001010000000000000515BI0100001124 | 20 | each |
|---|
| 13 | 1.012 | od1069202/2020_2021 : Supplying and fixing Panel board | BI01010001010000000000000515BI0100001125 | 1 | each |
|---|
| 14 | 1.013 | od1096274/2020_2021 : Supplying and fixing 2 HP Submersible pumpset.<br><br><br> | BI01010001010000000000000515BI0100001126 | 1 | each |
|---|
| 15 | 1.014 | od1069052/2020_2021 : Single phase electric connection from KSEB | BI01010001010000000000000515BI0100001127 | 1 | each |
|---|
| 16 | 1.015 | od1069053/2020_2021 : SUPPLYING AND FIXING 4MM SQ.ELECTRIC CABLE TO SUBMERCIBLE PUMPSET IN BOREWELL ETC.COMPLETE | BI01010001010000000000000515BI0100001128 | 30 | per metre |
|---|
| 17 | 1.016 | 5.21 : Extra for providing and fixing expanded metal mesh of size 20x60 mm and strands 3.25 mm wide 1.6 mm thick weighing 3.64 kg per sqm for encasing or rolled steel sections in beams, columns and grillages excluding cost of hangers. | BI01010001010000000000000515BI0100001129 | 19.076 | sqm |
|---|
| 18 | 1.017 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | BI01010001010000000000000515BI0100001130 | 510 | kg |
|---|
| 19 | 2 | panel shed | BI01010001010000000000000515BI0100001131 | | |
|---|
| 20 | 2.001 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001132 | 1.536 | cum |
|---|
| 21 | 2.002 | 4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001133 | 2.688 | cum |
|---|
| 22 | 2.003 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001134 | 115 | kilogram |
|---|
| 23 | 2.004 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | BI01010001010000000000000515BI0100001135 | 7.68 | sqm |
|---|
| 24 | 2.005 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | BI01010001010000000000000515BI0100001136 | 0.33 | sqm |
|---|
| 25 | 2.006 | 50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | BI01010001010000000000000515BI0100001137 | 3.77 | cum |
|---|
| 26 | 2.007 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001138 | 52.34 | sqm |
|---|
| 27 | 2.008 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001139 | 0.375 | cum |
|---|
| 28 | 2.009 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001140 | 0.461 | cum |
|---|
| 29 | 2.01 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001141 | 1.011 | cum |
|---|
| 30 | 2.011 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001142 | 9.86 | sqm |
|---|
| 31 | 2.012 | od1069086/2020_2021 : Supplying and fixing ventilator | BI01010001010000000000000515BI0100001143 | 1 | each |
|---|
| 32 | 2.013 | 10.5.2 : Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece | BI01010001010000000000000515BI0100001144 | 1.8 | sqm |
|---|
