| 1 | 1 | sCMOS monochrome detector 1900 x 1024 or larger with pixel size of ~ 5 um x 5 um to 6.5 um x 6.5um, Full well capacity > 20,000 e-, ADC 16 bits , \nRead noise < 2 e- RMS, \nShutter type: Rolling or fast global,\nQuantum efficiency: @400 nm > 25%, @500 nm to 650 nm > 55%, @700 nm > 50%, @800 nm > 30% and @850 nm > 20%, \nFrame rate: At full frame atleast 30 fps and at 950x512 ROI atleast 60 fps, \nMinimum exposure time < 0.05 ms, Maximum exposure time > 5000 msec, \nBinning capability 2x2 and 8x8, ROI capability,\nCamera system size & weight: within 3in x 3in x3 in or 75mm x 75mm x 75mm, weight < 2 kg\nMounting options: 1/4 inch mounting hole on two opposite sides to mount on optical bench using mounting post. Four holes (around M4 size) with distance of 1.18 inch or 30 mm on front face for mounting cage optics. Removable C mount adapter, Removable AR coated protective window, Interface: USB or LAN for control and image transfer along with cables, All connectors on the back face. Auxiliary connection for hardware trigger IN, strobe OUT, optically isolated I/O.Auxiliary I/O cable to connect the auxiliary connector of atleast 3 m length to be provided. Software – Complete camera control application software either on Windows or Linux. API and SDK to support Labview, Matlab, C/C++, .Net and Python on Windows and C/C++ and Python on Linux Drivers of Windows and Linux\n | item1 | 2 | Nos |
|---|
| 2 | 2 | Autoguider Monochrome CCD detector 1024x1024 pixels, 6 umx 6 um to 6.5 um x 6.5 um pixels,\nFull well > 15000 e-, 16 bit ADC, \nPeak QE > 55%,USB interface, \nread noise < 5 e-, dark ~ 0.001 e-/sec with TE cooling with delta of -25 deg C\nPreferably electronics shutter\nFrame rate: At full frame atleast 30 fps\nMinimum exposure time 1 ms and maximum exposure time > 10 min, \n12 V DC supply preferable, \nAutoguiding port: 6 pin ST4 compatible connector and pinout (Ground, North, South, East and West) \nWeight < 1 kg, Backfocus within 15 mm \n | item2 | 1 | No |
|---|
| 3 | 3 | Achromatic Doublet \nf=50mm, diameter = 25.4 mm, material N-BAF10/N-SF10, Mounted\nWith SM1 Threaded mounting\n | item3 | 4 | Nos |
|---|
| 4 | 4 | Achromatic Doublet\nf=35mm, diameter = 25.4 mm, material N-BAF10/N-SF6HT, Mounted\nWith SM1 Threaded mounting\n | item4 | 2 | Nos |
|---|
| 5 | 5 | Achromatic Doublet\nf=80mm, diameter = 25.4 mm, material N-BK7/N-SF5, Mounted\nWith SM1 Threaded mounting\n | item5 | 2 | Nos |
|---|
| 6 | 6 | Achromatic Doublet\nf=200mm, diameter = 25.4 mm, material N-BK7/SF5, Mounted\nWith SM1 Threaded mounting\n\n | item6 | 2 | Nos |
|---|
| 7 | 7 | Achromatic Doublet\nf=100mm, diameter = 25.4 mm, material N-BK7/SF5, Mounted\nWith SM1 Threaded mounting\n | item7 | 2 | Nos |
|---|
| 8 | 8 | Knife-Edge Right-Angle Prism- Protective Aluminum coated Mirror\n450 nm-20 µm, L = 25 mm | item8 | 2 | Nos |
|---|
| 9 | 9 | 1 inch diameter Mounted Lenslet Array\n400 - 900 nm AR Coating, Pitch = 300 µm, f = 14.6 mm | item9 | 3 | Nos |
|---|
| 10 | 10 | Kinematic Prism Mount\n25.4 mm Deep, M4 Taps, TPI Adjusters for ±4° of Fine Tip and Tilt Control, Platform can be Moved to Either Arm for Left- or Right-Handed Configuration, Designed for Use with Clamping Arms , M4 Through Holes or Taps in Back Plate of Mounts for ½ inch diameter Post Mounting | item10 | 2 | Nos |
|---|
| 11 | 11 | Component Clamp for Diameter 1/2 inch Posts\nM6 Taps, Five 1/4 inch-20 (M6 x 1.0) Tapped Thru Holes, Secure a Prism or Other Component Using a Nylon-Tipped Setscrew, Slip-On Collar Design Attaches to Diameter 1/2 inch Posts Using Thumbscrew, Use as Mounting Joist to Offset Optical Mounts | item11 | 3 | Nos |
|---|
| 12 | 12 | 12.7 mm diameter or matching Optical Post for above cameras\nSS, M4 Setscrew, M6 Tap, Length 30 mm | item12 | 4 | Nos |
|---|
| 13 | 13 | 12.7 mm diameter or matching Optical Post for above cameras\nSS, M4 Setscrew, M6 Tap, Length 50 mm | item13 | 4 | Nos |
|---|
| 14 | 14 | 12.7 mm diameter or matching Optical Post for above cameras\nSS, M4 Setscrew, M6 Tap, Length 75 mm | item14 | 4 | Nos |
|---|
| 15 | 15 | 30 mm cage rods \n12 inch long | item15 | 8 | Nos |
|---|
| 16 | 16 | 30 mm cage rods \n6 inch long | item16 | 12 | Nos |
|---|
| 17 | 17 | 30 mm cage rods \n3 inch long | item17 | 24 | Nos |
|---|
| 18 | 18 | ±1 mm XY Slip Plate Positioner\n30 mm Cage Compatible, metric | item18 | 5 | Nos |
|---|
| 19 | 19 | 30 mm Cage XY Translator for 1 inch diameter Optics \n±1 mm Travel in X and Y via 3/16 inch-100 Adjusters | item19 | 3 | Nos |
|---|
| 20 | 20 | SM1-Threaded 30 mm Cage Plate\nDirectly Mount Optical Components Within a 30 mm Cage System Assembly,4mm thickness,Tapped with Our Standard SM1 Thread (1.035 inch-40) | item20 | 8 | Nos |
|---|
| 21 | 21 | Standard Cage Plate for Diameter 1 inch Optics\nDouble Bore for Diameter 1 inch Optics, Directly Mounts Optical Components Within a 30 mm Cage System Assembly, Post Mountable via 8-32 (M4) Tapped Hole, Nylon-Tipped Locking Setscrew | item21 | 4 | Nos |
|---|
| 22 | 22 | FC/PC Fiber Adapter Plate \nwith External SM1 (1.035 inch-40) Threads, Wide Key (2.2 mm) | item22 | 2 | Nos |
|---|
| 23 | 23 | 66 mm Single Dovetail Rail with Mounting Counterbores\n66 mm Rail with Smallest Footprint for One-Dimensional Constructions, L = 1000 mm | item23 | 4 | Nos |
|---|
| 24 | 24 | Table clamp for above\nMounting using one cap screw and washer to secure for optomechanical components with a thickness up to 0.50inch. | item24 | 10 | Nos |
|---|
| 25 | 25 | 66 mm Single Dovetail Rail with Mounting Counterbores\n66 mm Rail with Smallest Footprint for One-Dimensional Constructions, L = 750 mm, Black Anodized Finish with Mounting Counterbores and Engraved Scale | item25 | 4 | Nos |
|---|
| 26 | 26 | Clamping Platform for 66 mm Rails for above\n¼ inch Counter bored Slot, 40 mm Long, Slides Along Rail Side Prior to Lockdown, Locking Screws | item26 | 10 | Nos |
|---|
| 27 | 27 | 12.7 mm Diameter Post Holder\nSpring-Loaded Hex-Locking Thumbscrew, with length of 75 mm | item27 | 10 | Nos |
|---|
| 28 | 28 | 12.7 mm diameter Optical Post\nSS, M4 Setscrew, M6 Tap length 100 mm | item28 | 14 | Nos |
|---|
| 29 | 29 | 30 mm to 60 mm Cage Plate Adapte\nM4 Tap, Couples 30 mm and 60 mm Cage Systems, Centered SM1 (1.035 inch-40) Tapped Hole Directly Accepts 1 inch diameter Optics up to 0.35inch (9 mm) Thick, 8-32 (M4) Tapped Hole for Mounting to 1/2 inch diameter Posts | item29 | 10 | Nos |
|---|
| 30 | 30 | 60 mm Cage Rotation Mount for 2 inch diameter Optics\nM4 x 0.7 Tap, Mounts 2 inch (50.8 mm) diameter Optics or SM2-Threaded Components, 48 mm diameter Clear Aperture\n360 degree of Continuous Rotation, 1 degree Engraved Graduations on Dial, Labeled Every 10 degree, Setscrew Locking Mechanism\nSM2-Compatible Rotation Carriage, 8-32 (M4 x 0.7) Hole for Post Mounting\n | item30 | 3 | Nos |
|---|
| 31 | 31 | SM2-Threaded Round Cage Plate \nwith SM1 Internal Thread and SM2 External Thread, 1 SM1 Retaining Ring | item31 | 4 | Nos |
|---|
| 32 | 32 | 4 inch x 3 inch smooth motion Lab Jack\n1.04 inch Vertical Travel, 20 kg Load Capacity compatible with optical bench with M3,M4 and M6 mounting holes on both top and bottom surfaces | item32 | 1 | No |
|---|
| 33 | 33 | Standard bases: anodized aluminum with straight slot of 28 mm\none mounting hole with a dimension of 25 x 58 x 10 mm with one slot, Slot type:straight, Slot length: 1.10 inch (27.9 mm), mounting holes:1 \nAttach to Post Holders via Bottom-Located 1/4 inch-20 (M6) Counterbored Mounting Hole(s), Mount on Breadboard or Optical Table via Clearance Slot(s) for 1/4 inch-20 (M6) Cap Screws\n | item33 | 15 | Nos |
|---|
| 34 | 34 | Standard bases: anodized aluminum with straight slot of 44.5 mm\none M6 mounting hole with a dimension of 25 x 75 x 10 mm with one slot, Slot type:straight, Slot length: 0.81 inch (20.1 mm), mounting holes:2 \nAttach to Post Holders via Bottom-Located 1/4 inch-20 (M6) Counterbored Mounting Hole(s), Mount on Breadboard or Optical Table via Clearance Slot(s) for 1/4 inch-20 (M6) Cap Screws\n | item34 | 10 | Nos |
|---|
| 35 | 35 | M6 Cap Screw and Hardware Kit\nM6 x 1.0 SS* Cap Screw, Thread Length: 10 mm - 60 nosM6 x 1.0 SS* Cap Screw, Thread Length: 12 mm - 12 nosM6 x 1.0 SS* Cap Screw, Thread Length: 16 mm - 16 nosM6 x 1.0 SS* Cap Screw, Thread Length: 20 mm - 20 nosM6 x 1.0 SS* Cap Screw, Thread Length: 25 mm - 25 nosM6 x 1.0 SS* Cap Screw, Thread Length: 30 mm - 30 nosM6 x 1.0 SS* Cap Screw, Thread Length: 35 mm - 50 nosM6 x 1.0 SS* Cap Screw, Thread Length: 45 mm - 43 nosM6 x 1.0 SS* Setscrew, Thread Length: 12 mm - 150 nosM6 x 1.0 SS* Setscrew, Thread Length: 20 mm - 65 nosM6 SS* Nut - 120 nosM6 SS* Washer, Outer Diameter: 0.500 inch - 220 nos\nFor mounting the hardware to optical bench\n | item35 | 1 | Set |
|---|
| 36 | 36 | Pellicle Beamsplitter\n2 inch diameter, Uncoated for 8:92 (R:T) Split Ratio for 400-2400 nm | item36 | 2 | Nos |
|---|
| 37 | 37 | Mounts for above Pellicle Beamsplitters\n2 inch diameter, Designed to Mount 3/16 inch Thick (4.8 mm) Pellicle Beamsplitters, Post-Mountable Design Centers Pellicle About Axis of Rotation,Two 2-56 Cap Screws Provided for Mounting Pellicle | item37 | 2 | Nos |
|---|
