NAME OF WORK: PROVISION OF DEFI BED SIDE LOCKERS AND OTHER DEFICIENT FURNITUR ITEMS FOR JCOS/OR SINGLE AND MD ACCN AT BHOPAL.
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
SCH 'A' PART-I : WOODEN FURNITURE
2
1.01
Bin Linen Multipurpose
FD/E6/MAP/09
12
Each
3
1.02
Chair Dining Offrs
FD/MAP-II/04
308
Each
4
1.03
Chair Dining JCO/ORs
FD/MAP-II/05
241
Each
5
1.04
Chair Easy
FD-229
360
Each
6
1.05
Chair Writing
FD-280
108
Each
7
1.06
Dressing Table including Stool
FD/MAP-II/07
15
Each
8
1.07
Peg Table
FD-384
100
Each
9
1.08
Sofa set 4 Seater
FD/MAP-II/02
9
Set
10
1.09
Sofa set 5 Seater
28
Set
11
1.1
Stool Dressing Cushioned
FD/E6/MAP/14
80
Each
12
1.11
Table bed Side
FD/E6/MAP/15 (R)
119
Each
13
1.12
Table dining 6 Pers
FD/MAP-II/03
1
Each
14
1.13
Teapoy
FD-382
30
Each
15
1.14
Teapoy Varandah
FD/E6/MAP/17
44
Each
16
2
SCH 'A' PART-II : STEEL FURNITURE
17
2.01
Almirah Large Steel (Half Hanging)
FD/E6/MAP/18
36
Each
18
2.02
Bed Hard Steel
FD/E6/MAP/08 (R)
5
Each
19
2.03
Book Case Steel
FD-1028
31
Each
20
2.04
Chair Verandah
FD/MAP-II/06
280
Each
21
2.05
Charpoy with Hard Top
FD/MAP-II/01
683
Each
22
2.06
Charpoy IP Folding with ply top
FD-388 (R)
30
Each
23
2.07
Table Clerks Steel
FD-1004
67
Each
24
2.08
Table Officer Steel
FD-1003
39
Each
25
2.09
Table Typist Steel
FD-1006
13
Each
26
2.1
Table with drawer (900 x 600 x 760 mm)
FD-1008
20
Each
27
2.11
Locker Steel\nNote: Arrangement for fixing the item shall not be made with wall as shown in Drg. Dimensions / specification of other members of the locker steel will remain unchanged.
FD-1029
896
Each
28
2.12
Table 900 x 900 x 760 mm
FD-1009
43
Each
29
3
SCH 'A' PART-III : TRADE PATERN FURNITURE
30
3.01
Bathmat PVC
FD/E6/MAP/07
123
Each
31
3.02
Chair Conference
TP \n
27
Each
32
3.03
Chair Revolving Executive
3
Each
33
3.04
Chair Plastic Moulded
85
Each
34
3.05
Receptacle PVC
FD/E6/MAP/13
179
Each
35
3.06
Sofa Set 3 + 1 + 1 Seater
T P \n
1
Set
36
3.07
Table Executive
16
Each
37
4
SCH 'A' PART-IV : REPAIR TO CHARPOY GI
38
4.01
Tightening of loose charpoy after removing of old/ torn out nylon newar from Charpoy GI Pipe and S&F of 12 mm thick ply, ISI mark, BWR Grade, as per IS 303, of size 1980 mm x 900 mm by fixing with 12 Nos nut and bolt of suitable size with GI washer alongwith provision of 25 mm square MS pipe stiffner 02 Nos of 1.6 mm thick , conically/ slanting cut at the ends to continuously welded on all four sides to flush with the top of long rail as directed by GE. The MS pipes shall be painted with two coats of synthetic enamel black paint over a coat of red oxide primer complete all as per Drg and as specified and directed. \n
FD-220
1300
Each
39
4.02
Removing of damaged/ broken/ unserviceable long rails from existing Charpoy GI pipe and S&F of new long rail made out of GI pipe 32 mm nominal bore, medium grade (ISI marked) confirming to IS 1239 both ends threaded complete all as specified and shown on drg. and directed.\n
1200
Each
40
4.03
Removing of damaged/ broken/ unserviceableshort rails from existing frame of Charpoy GI pipe and fixing of short rail made from old long rails retrieved against BOQ Serial Item No.4.02 here-in-before including cutting threading of both ends to required size complete all as specified and shown on drg. and directed.
500
Each
41
4.04
Removing of damaged/ broken/ unserviceable leg from existing frame of Charpoy GI pipe and fixing leg made from old short rails retrieved against BOQ Serial Item No.4.03 here-in-before including cutting threading and welding of 3 mm MS plate of required size in bottom of leg and fixing in Charpoy GI Pipe complete as specified and shown on drg and directed.
500
Each
42
4.05
Removing of old/ damaged /unserviceable GI elbow 3 way, 32 mm bore from existing frame of Charpoy GI pipe and S&F of new GI elbow 3 way, 32 mm bore, medium grade confirmiing to IS 1239 to Charpoy GI pipe, complete all specified and shown on drawing and directed.
1280
Each
43
5
Deduct schedule of credit (calculation will be done off line) Rs.39,100.00 \n
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
