E-Tender For The Supply And Delivery Of Poultry Cages And All Related Works At Thiruvananthapuram E-Tender For The Supply And Delivery Of Poultry Cages And All Related Works AtThiruvananthapuram
Tender Value
39.82 Lakhs
Estimated cost
Bid Submission
25 Feb 2021
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2975
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
E-Tender For The Supply And Delivery Of Poultry Cages And All Related Works At Thiruvananthapuram E-Tender For The Supply And Delivery Of Poultry Cages And All Related Works AtThiruvananthapuram
BOQ
| Name of Work: e-tender for the Supply and Delivery of Poultry Cages and all related works at Thiruvananthapuram | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | e-tender for the Supply and Delivery of Poultry Cages and all related works at Thiruvananthapuram \nfor more details refer tender documents | Item Code / Make | ||
| 2 | 1.01 | \n100 birds poultry cage 1M 2 Tier (5 Cages x 4 Lines)\nCage Dimensions:Front / Feeding (25“ x 5 Nos) 125 “ Breadth / Depth 15 “, Front height 17\", Back Height 15\", Stand Height from ground 30\", Door Size :- Height 6\", Breath 7.5\"PVC Feeder:- Length 125\", Breadth 5\" Materials Used :\na. TATA GI Wire Weld Mesh of 90 gsm coating for front, top and back with line wire - 3.00 mm,cross wire-3.00 mm with cross pitch-2.4“ b). TATA GI Wire Weld Mesh of 90 gsm coating for centre and partition with line wire -2.50mm,cross wire-2.50mm with cross pitch-1“ c). TATA GI Wire Weld Mesh of 90 gsm coating for bottom, line wire - 2.50mm, cross wire-2.50 mm with cross pitch-1.5“ d). TATA GI Wire Weld Mesh of 90 gsm coating for door with line wire - 3.50mm and cross wire- 3.50mm with cross pitch-2.4“ e). Mild Steel Angle of Size 32 x 5 mm for M-Type Stand Frame, Roof Support and Leg f). Mild Steel Flat of Size 25 x 5 mm for Interconnecting M.S. Angle Section and Runner g) . Water Dripper Arrangements with 2 Nos. of Nipples in each box (Total 48 Nos.) connected together with ¾“ PVC square pipe and all accessories attached to a common storage PVC Water Tank with a minimum capacity of 10 Litres each on either sides h). Egg Collection Tray to be attached along with bottom mesh of cage as a Single Unit in TATA GI Wire Weld Mesh of 90 gsm coating i). Feed Supply Tray in PVC with end covers on both sides fixed and jointed firmly together to form one piece j).Roofing Sheet to be provided in Aluminum Sheet of 0.30mm thickness and to be fixed firmly in\nMS Angle Iron section extended as part of roof post. The roofing sheet should be fixed asslopping gradient on either side. k). GI Wire with 90 gsm coating to be used for cage binding works. L). All fabricated angle iron and MS Flat section should be painted with 2 coats of Black Synthetic Enamel Paint over a prime coat of Zinchromate Primer. M). A Plastic Mosquito Net Mesh type covering is to be provided on top of egg roll welded mesh over the entire\nlength of cage in all tiers for protecting the eggs laid. | item 1 | 135 | nos |
AI Tender Summary
Tender Timeline
Feb 17, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 25, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 26, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender