| 1 | 1 | Demolition of Brick work or stone/ boulder masonary built in Cement mortar complete all as specified & directed | | 8 | Cum |
|---|
| 2 | 2 | M & L for brick work with sub class `B' brick (Old size) straight or curved on plan exc 6m mean radius in cement mortar (1:6) complete all as specified & directed. | | 8 | Cum |
|---|
| 3 | 3 | M&L reinforced cement concrete 1:1.5:3 type A1 (using 20 mm graded stone aggregate) as in lintel beams, cantilever, bressummers, lintels over 1.5 m clear span etc complete all as specified & directed. | | 1 | Cum |
|---|
| 4 | 4 | Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. | | 15 | Sqm |
|---|
| 5 | 5 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. | | 50 | Kg |
|---|
| 6 | 6 | M & L for mild steel TMT bars 6 mm dia and over upto and including 8 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. | | 30 | Kg |
|---|
| 7 | 7 | Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed. | | 130 | Sqm |
|---|
| 8 | 8 | Supply only water proofing compound (liquid),ISI marked complete all as specified & directed. | | 5 | Ltr |
|---|
| 9 | 9 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified & directed. Note : Liquid WPC will be measured and paid separately. | | 100 | Sqm |
|---|
| 10 | 10 | M&L 15mm thick Rendring in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified & directed . | | 30 | Sqm |
|---|
| 11 | 11 | Roughing surface of old concrete by picking, sweeping, cleaning & washing down with water to remove dust etc. Complete all as specified & directed | | 245 | Sqm |
|---|
| 12 | 12 | M&L 25 mm thick, PCC Cement concrete 1:2:4, type B-0, using 12.50mm graded stone aggregate as in floor etc complete all as specified & directed . | | 375 | Sqm |
|---|
| 13 | 13 | M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 on concrete surfaces mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified & directed. \nNote : Liquid WPC will be measured and paid separately. | | 245 | Sqm |
|---|
| 14 | 14 | M&L brushing neat cement slurry with 3 kg per square meter of cement omplete all as specified & directed. | | 245 | Sqm |
|---|
| 15 | 15 | M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :-\n(i) Properly cleaning and drying concrete surfaces.\n(ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm.\n(iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm.\n(iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction.\n(v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. \nNOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed. | | 245 | Sqm |
|---|
| 16 | 16 | M&L for prepartion new plastered surface of wall and applying two coat of cement base paint over a coat primer complete all as specified & directed. | | 100 | Sqm |
|---|
| 17 | 17 | M&L for prepartion old plastered surface of wall and applying two coat of cement base paint complete all as specified & directed. | | 50 | Sqm |
|---|
| 18 | 18 | M&L for three coats of white washing on old wall surfaces incl preperation of old sufraces complete all as specified & directed. | | 25 | Sqm |
|---|
| 19 | 19 | M&L for prepartion old plastered surface of ceiling and applying three coat of white wash complete all as specified & directed. | | 30 | Sqm |
|---|
| 20 | 20 | Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets etc complete all as specified & directed. | | 150 | Sqm |
|---|
| 21 | 21 | S&F in position false ceilling comprising of grid system of Armstrong etc for frame work with GI powder coated angle wall runners of size 19 mmX19 mm cross Tee of size 24mmX24mm and main tee of size 34mmX24mm at 60 cm c/c approx to form a grid of 600mmX600mm filled with 12 mm thick tegular edge of insulation Armstrong ceilling tiles of mineral wool rock fibres make of approved designer false ceilling shall be suspended form roof on main runners @ 0.90 mm c/c by means of suitable suspender (average 1.50 mtr length) 4 mm GI wire with adjustable cleats of hook complete all as specified and directed. | | 150 | Sqm |
|---|
| 22 | 22 | M&L for wall lining of PVC hollow sheet 5-7 mm thick consisting of 20 mm MS hollow square tubes medium grade grid and fixed with screws complete all as directed. Make- Syntex/Rajshree | | 60 | Sqm |
|---|
| 23 | 23 | M&L for 50mm dia MS pipe medium grade, cut to length and fixed to walls for encroaching hanging the ceiling grid including two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.\nNote:- Cutting holes & making good for fixing shall be measured & paid separately under respective item of Sch 'A'. | | 30 | RM |
|---|
| 24 | 24 | M&L Cutting holes into or through brick walls built in cement mortar/cement lime mortar superficial area n.exc. 150 Sq. cm and making good in cement mortar (1:3) or PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as required complete all as specified & directed. | | 60 | Per CM Depth |
|---|
| 25 | 25 | S & F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves complete all as specified and directed. | | 5 | Sqm |
|---|
| 26 | 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified & directed. | | 85 | Sqm |
|---|
| 27 | 27 | M&L for 10mm thick coloured vitrified tiles of size exceeding 0.36 sqm but not exceeding 0.42 sqm in floors incl 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed in coloured cement to match with the floor all as specified & directed. | | 130 | Sqm |
|---|
| 28 | 28 | M & L for Non skid colour tiles of 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc. over and incl 15mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. | | 25 | Sqm |
|---|
| 29 | 29 | M&L for coloured glazed ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in dado/skirting etc incl 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement | | 60 | Sqm |
|---|
| 30 | 30 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed | | 10 | Each |
|---|
| 31 | 31 | Ditto--- as per Srl itemNo 30 but exc 1.5 Sqm but n.exc. 4 Sqm each complete all as specified & directed. | | 8 | Each |
|---|
| 32 | 32 | S & F in repair aluminium window sliding shutter three track with following specification:-\n(a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM\n(b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM\n(c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM\n(d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment.\n(e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket.\n(f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc complete all as specified and directed . | | 12 | Sqm |
|---|
| 33 | 33 | S & F in repair aluminium door shutter with following specification:-\n(a) chowkhat frame of size 63.00 x 38.10 x1.22 mm @ 0.650Kg/RM\n(b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667 KG/RM\n(c) Top and Middle rail of size 47.62 x 44.45 x 1.18 mm @ 0.667 KG/RM\n(d) Bottom Rail of size 114.30 x 44.45 x 1.29 mm @ 1.139 KG/RM\n(e) Partialy 9mm thick prelaminated particle board both side decorative\n(f) Partialy 5.5 mm thick tinted glass. \n(g) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass. \n(h) Two No.Disk Type Aluminium handle 200 mm long.\n(i) One No. Mortice lock and joing cleat. complete all as specified and directed . | | 15 | Sqm |
|---|
| 34 | 34 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed | | 5 | Each |
|---|
| 35 | 35 | M&L for sand filling under floors or in foundations, laid in layers n exc 15 cm thick, spread levelled including watering and consolidation complete all as specified and directed | | 7 | Cum |
|---|
| 36 | 36 | M&L for hard core of broken stone gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface complete as specified and directed. | | 5 | Cum |
|---|
| 37 | 37 | M&L for 100mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in floor Complete all as spesified and directed | | 75 | Sqm |
|---|
| 38 | 38 | M&L 55mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate), as in floor Complete all as spesified and directed . | | 80 | Sqm |
|---|
| 39 | 39 | S&F Galvanised, corrugated mild steel sheeting thickness not less than 0.63mm with two corrugations side lap, fixed with coach screw and washers, J-type,L-type or cranked hook in roofs, walls etc with grade of zinc coating 275 complete all as specified & directed | | 12 | Sqm |
|---|
| 40 | 40 | M&L for prepartion new steel or iron surfaces of any description,not otherwise decribed, exc 10 cm width or girth and applying two coat of synthetic enameled paint over a coat of red oxide primer complete all as specified & directed. | | 15 | Sqm |
|---|
| 41 | 41 | S&F in repairs vitreous china half stall urinal flat back (white) with grating, water spreader and union for discharge pipe including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 6 | | 1 | Each |
|---|
| 42 | 42 | S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white including white seat cover ( excluding flushing cistern and flush pipe) complete all as specified & directed by Engr-in- Charge. | | 2 | Each |
|---|
| 43 | 43 | S&F in repair Stop valves, cast copper alloy chromium plated fancy type, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed | | 2 | Each |
|---|
| 44 | 44 | Supply and fixing in repair 15mm dia pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. | | 2 | Each |
|---|
| 45 | 45 | S&F in repair PVC low level flushing cistern 10 ltr capacity including bracket fixed to wall & PVC high density tube 32 mm dia flush pipe complete in repair complete all as specified & directed. | | 1 | Each |
|---|
| 46 | 46 | S&F in repair tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges inluding brackets complete complete all as specified & directed. | | 1 | Each |
|---|
| 47 | 47 | S&F in repair Soap dish, stainless steel, approximate size 160x160x90mm and approved by EIC complete all as specified & directed | | 1 | Each |
|---|
| 48 | 48 | S&F in repair bib tap 15mm chromium plated long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc fancy type complete all as specified and directed. | | 6 | Each |
|---|
| 49 | 49 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers | | 2 | Each |
|---|
| 50 | 50 | S&F in repair PVC (SWR) floor trap of dia 75 mm with gratings including jointing with solvent cement in repair complete all as specified & directed. | | 4 | Each |
|---|
| 51 | 51 | Taking up or down steel tubing & connections of pipe 15mm dia complete all as specified & directed | | 30 | RM |
|---|
| 52 | 52 | Taking up or down steel tubing & connections of pipe 20mm dia complete all as specified & directed | | 55 | RM |
|---|
| 53 | 53 | S & F 15 mm dia GI mild steel tube medium grade with all fittings and fixed compete to wall and ceiling or laid in floor complete all as specified & directed. | | 30 | RM |
|---|
| 54 | 54 | S & F 20 mm dia GI mild steel tube medium grade with all fittings and fixed compete to wall and ceiling or laid in floor complete all as specified & directed. | | 55 | RM |
|---|
| 55 | 55 | S & F in repair rotational moulded polyethylene water storage tank (Three layer) of capacity 500 litrs (Cylindrical vertical with closed top) hoisted and fixed on position all as specified in SSR Pt I complete all as specified & directed. | | 2 | Each |
|---|
| 56 | 56 | S&F PVC ball valve 20 mm dia with epoxy coated aluminium rod and high density ball (minium weight 210 gms) complete all as specified & directed | | 2 | Each |
|---|
| 57 | 57 | Cutting chases in brick wall, etc for concealed water tubing ,etc & making good in CM 1:3 , cutting not exc 10 cm girth complete all as specified & directed. | | 5 | RM |
|---|
| 58 | 58 | S&F in repair 450mm long PVC connection of size 15 mm with PTMT nuts etc complete all as specified & directed. | | 2 | Each |
|---|
| 59 | 59 | Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed. | | 96 | Per \nPoint |
|---|
| 60 | 60 | Taking down existing sub main wiring of any type and description removal of teak wood batten/PVC/pipe etc complete all as specified | | 40 | RM |
|---|
| 61 | 61 | Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed. | | 2 | Each |
|---|
| 62 | 62 | M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including MS boxes for mounting switches, sockets, fan regulators etc for the following complete all as specified and directed:- | | | |
|---|
| 63 | 63 | One light /bell/ fan point controlled by one switch complete all as specified & directed | | 41 | Per Point |
|---|
| 64 | 64 | One 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified & directed. | | 15 | Per Point |
|---|
| 65 | 65 | One 5 Amps socket out let point on independent board controlled by one switch complete all as specified & directed. | | 10 | Per Point |
|---|
| 66 | 66 | ~Ditto~ all as per Sch A Item No- 62 above but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch complete all as specified and directed.. | | 30 | Per Point |
|---|
| 67 | 67 | S&F, Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volt grade, ISI marked complete all as specified and directed. | | 65 | Each |
|---|
| 68 | 68 | Supply and fixing switch piano flush button single pole one way 15 amps, 230 Volts complete all as specified and as directed. | | 30 | Each |
|---|
| 69 | 69 | S & F switch socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 230 volts complete all as specified & directed. | | 25 | Each |
|---|
| 70 | 70 | S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 240 volts complete all as specified & directed. | | 30 | Each |
|---|
| 71 | 71 | S&F ceiling rose surface bakelite 63.5mm dia three terminals fixed, complete all as specified & directed. | | 20 | Each |
|---|
| 72 | 72 | Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed. | | 6 | Each |
|---|
| 73 | 73 | Supply and fixing multi music Bell, AC 240 Volts,single pole complete all as specified and directed. | | 1 | Each |
|---|
| 74 | 74 | Supply and fixing bell push single pole, 6 amps, 230 Volts, flush type complete all as specified and as directed. | | 1 | Each |
|---|
| 75 | 75 | S&F lamp holder insulated body with back plate for batten/ angular fitting complete all as specified & directed. | | 4 | Each |
|---|
| 76 | 76 | Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Havell's Cat No: HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG. | | 4 | Each |
|---|
| 77 | 77 | Supply and fixing LED tube rod 18 watt 230 volt T8 type made up of polycarbonate with in built electric electronic driver both sided connection with metal heat sink complete fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size complete all as specified & directed. \nMake- Havells, Cat No: CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of Bajaj/Philips/Crompton. | | 10 | Each |
|---|
| 78 | 78 | S&F LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Crompton Greaves, Model No: DMLN1LT8-16 or equivalent model of Bajaj/Surya/ Havells Cat No: REGALBATTENT8UPTO1X22WDSBSWH | | 10 | Each |
|---|
| 79 | 79 | S&F recessed mounting fitting 1 x 42 watt ultra modern design architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong / Grid Ceiling including LED driver and 42 watt lamp incl all accessories complete all as specified and as directed. Make, Havells Cat no - VENUSNEOHE2X2PLR18-42WLED857MOD , or equivalent Make of Philips / Bajaj / Crompton Greaves \n | | 10 | Each |
|---|
| 80 | 80 | Supply and fixing double door TPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed .Make: Schneider/ Legrand/ L&T / ABB. \n | | 1 | Each |
|---|
| 81 | 81 | Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed . \n | | 1 | Each |
|---|
| 82 | 82 | Supply and fixing MCB TPN 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed . Make: Schneider/ Legrand/ L&T / ABB. \n | | 1 | Each |
|---|
| 83 | 83 | Supply and fixing MCB SPN 5 to 32 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge. Make : Make: Schneider/ Legrand/ L&T / ABB. | | 4 | Each |
|---|
| 84 | 84 | S&F MCB SP of capacity 5 - 32 Amps 240 volts, 10 KA breaking capacity 'C' type incl connection complete all as specified & directed. | | 10 | Each |
|---|
| 85 | 85 | M/L for provision of sub main wiring with two runs of single core PVC insulated unsheathed 6 Sqmm mutistranded copper conductor 1100 volts drawn in and including 20 mm dia non mettalic rigid PVC conduct with its accessories,concealed type, incl PVC insulated unsheathed soild copper conductor 4 sqmm as earth continuity and connected of common earth dolly and all necessary cutting for concealed type& making good the surface as per existing all as specified& directed by Engr-in-Charge. | | 40 | RM |
|---|
| 86 | 86 | M&L for earthing complete with galvanized steel earth plate electrod 60cmx60cmx6mm thick burried directly in the ground (earth pit not less than 2.25 metre below normal ground level).connected to galvanised earth lead strip of sixe 25mm x 4mm of nuts,bolts check nuts and washers of galvanised iron of steelinculding 40 mm dia light grade GI tubing for protection of earth lead MSsheet metal with wire mesh. watering pipe medium grade 20 mm dia, charcol or coke and common salt in alternative of 15 cm conpacted thickness all arround the electrod with concrete earth pit of pcc 1:3:6 type 01.50 mm thick pre cast RCC (1:2:4) type B1, pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar and necessary excavation earth work in soft/loose soil and disposal or spoils to a distance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No 3 and all as specified and directed. | | 1 | Each |
|---|
| 87 | 87 | M & L for Galvanised iron strip (32x6) mm fixed with existing earth conductor or extesion of earthing and down conductor above the ground level, complete all as specified and directed. | | 30 | RM |
|---|
| 88 | 88 | Supply, laying and testing of XLPE cable Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed . Make: Havell's/Polycab/Grandlay | | 40 | RM |
|---|
