Military Engineer Services-MES has published Augmentation Of Sports Infrastructure At Command Stadium Under Ge ( Nw ) Navy Nagar Colaba Mumbai. Submission Date for this Tender is 01-04-2021. Infrastructure Work Tenders in GE (NW) Navy Nagar Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Mar-2021 | Revised BOQ | BOQ | 25-03-2021 |
| 2 | 25-Mar-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-04-2021 |
| Name of Work : AUGMENTATION OF SPORTS INFRASTRUCTURE AT COMMAND STADIUM UNDER GE (NW) NAVY NAGAR, COLABA, MUMBAI | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge | 2139 | Sqm | |
| 2 | 2 | Supplying & fixing Coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM (1:4).complete all as specified and directed by Engineer-in-Charge | 130 | Sqm | |
| 3 | 3 | Material & labour for coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster in CM (1:4) as a back layer for receiving the tiles etc complete all as specified and directed. | 410 | Sqm | |
| 4 | 4 | Material & labour for virified ceramic tiles 9/10 mm thick light shade (square/ rectangular) polished, of size 600 x 600, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) etc set and jointed in neat cement slurry and grouted with epoxy grout to match complete all as specified and directed by Engineer-in-Charge. \nMake :- Kajaria / Somany / Johnson or equivalent) | 90 | Sqm | |
| 5 | 5 | Material & labour for machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. | 147 | Sqm | |
| 6 | 6 | Material & labour for machine cut pre-polished kota stone slab in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. | 22 | Sqm | |
| 7 | 7 | Material & labour for grinding ,rubbing and polishing on existing Granite sufaces in floors and steps to match new surfaces complete all as specified and directed by Engineer-in-Charge | 580 | Sqm | |
| 8 | 8 | Supplying & fixing wall tiles of 200 mm x 100mm and 12 mm thick set & jointed in neat cement slurry & pointed in white cement mixed with colour pigment to match the colour of tiles over and including 15 mm thick cement plaster in CM (1:4) complete all as specified and directed by Engineer-in-Charge. \nMake :- Duracrete / Ultra Tiles (Pattern and design of the tile shall be as per approval of Garrison Engineer) | 145 | Sqm | |
| 9 | 9 | Dismantling paver blocks in floor and removing the material outside MoD land complete all as specified and directed by Engineer-in-Charge | 550 | Sqm | |
| 10 | 10 | Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft / Loose soil complete all as specified and directed by Engineer-in-Charge | 1810 | Sqm | |
| 11 | 11 | Material & labour for hard core of broken stone or boulder of guage not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered & rammed to a true surfaces complete all as specified and directed by Engineer-in-Charge | 275 | Cum | |
| 12 | 12 | Material & labour for 75 mm thick PCC (1:3:6) type C-1 (20mm graded agg) as in sub base flooring and similar works finished even & fair without using extra cement complete all as specified and directed by Engineer-in-Charge . | 1810 | Sqm | |
| 13 | 13 | Material & labour for machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using PCC (1:2:4) type B-1 etc complete all as specified and directed by Engineer-in-Charge | 2360 | Sqm | |
| 14 | 14 | Material & labour for for sand filling under floors or in foundation including watering and consolidation etc complete all as specified and directed by Engineer-in-Charge | 130 | Cum | |
| 15 | 15 | Supplying & fixing chinaware wash basin (size 550 mm x 425 mm x 195 mm) including CP waste coupling and PVC waste pipe complete all as specified and directed by Engineer-in-Charge. \nMake :- Hindware / Jaquar orequivalent as approved by GE | 4 | Each | |
| 16 | 16 | Supplying & fixing brass chromium plated pillar cock long sunk with auto closing system fixed at counter top complete all as specified and directed by Engineer-in-Charge. all as directed and as specified.\nMake Hindware/Jaquar or equivalent as approved by GE | 4 | Each | |
| 17 | 17 | Material & labour for vitreous china urinal,half stall type with grating, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brassscrews, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed by Engineer-in-Charge. | 3 | Each | |
| 18 | 18 | Supplying & fixing brass chromium plated push cocks for urinal complete all as specified and directed by Engineer-in-Charge. | 3 | Each | |
| 19 | 19 | Material & labour for urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed by Engineer-in-Charge. (Minimum weight 60gms) | 3 | Each | |
| 20 | 20 | Material & labour for in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including connection to trap/drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, making good to floor complete all as specified and directed by Engineer-in-Charge.\nMake :- Hindustan / Parryware / Cera | 4 | Each | |
| 21 | 21 | Material & labour for plastic water closet seat, black, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.\nMake :- Hindustan / Parryware / Cera | 4 | Each | |
| 22 | 22 | Supplying & fixing in repairs CP Jet with 600 mm long connection pipe fixed to water closet pedestal pattern complete all as specified and directed by Engineer-in-Charge. | 4 | Each | |
| 23 | 23 | Material & labour for 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repairs complete all as specified and directed by Engineer-in-Charge. \nMake :- Commander / Parryware / Cera | 4 | Each | |
| 24 | 24 | Supplying & fixing brass chromium plated bib cock with flange complete all as specified and directed by Engineer-in-Charge.\nMake :- Hindware / Jaquar or equivalent as approved by GE. | 10 | Each | |
| 25 | 25 | Material & labour for in repairs brass chromium plated shower rose 125mm size with or without swivel joints with shower arm 15 mm size, 195mm long with bend of 45 degree with flange including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge. | 10 | Each | |
| 26 | 26 | Supplying & fixing brass chromium plated angular stop cock (concealed) with flange complete all as specified and directed by Engineer-in-Charge. \nMake :- Hindware / Jaquar or equivalent as approved by GE. | 12 | Each | |
| 27 | 27 | Supplying & fixing PVC connectors of 15 mm size with PTMT nuts of length 600 mm length complete all as specified and directed by Engineer-in-Charge. | 8 | Each | |
| 28 | 28 | Supplying & fixing 100mm bore CI floor trap with gratings incl jointing to waste pipe in run lead complete all as specified and directed by Engineer-in-Charge.. | 10 | Each | |
| 29 | 29 | Supplying & fixing looking mirror 2.4 mtrs x 0.5 mtrs & 6 mm thick of mirror selected quality glass fixed onwall with nut and screw on vertical surfaces size of each pane not less than 1.2 Sqm each complete all as specified and directed by Engineer-in-Charge. Make :- Atul / Kohinoor / Swastik | 4 | Each | |
| 30 | 30 | Taking down chawkhats or frame (w/o taking off shutters from the frames) but not exceeding 1.50 each complete all as specified and directed by Engineer-in-Charge. | 14 | Each | |
| 31 | 31 | Taking down chawkhats or frame (w/o taking off shutters from the frames) but exceeding 1.50 but not exceeding 4 Sqm each complete all as specified and directed by Engineer-in-Charge. | 12 | Each | |
| 32 | 32 | Supplying & fixing MS holdfast, wall ties and similar articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed by Engineer-in-Charge. | 20 | Kg | |
| 33 | 33 | Material & labour for PCC (1:3:6) type CI (20mm graded agg) for fixing of hold fast complete all as specified and directed by Engineer-in-Charge.. | 1 | Cum | |
| 34 | 34 | Supplying & fixing 2nd class hard wood plain, solid straight chowkats and frames, wrought framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.. | 1 | Cum | |
| 35 | 35 | Supplying & fixing 2nd class hard wood 35mm thick factory made plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial or 12mm veneered particle board with commercial veneer on both faces the size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressured treated complete all as specified and directed by Engineer-in-Charge.\nMake :- Doorking / Betul wood products / Prince Timbers | 14 | Sqm | |
| 36 | 36 | Supplying & fixing solid FRP door frame of size 90 x 40 mm made out 5mm plain colour PVC sheet reinforced with MS square tube made as per specification and drawing complete all as specified and directed by Engineer-in-Charge.\nMake :- Sintex / Rajshree / Accucel | 59 | RM | |
| 37 | 37 | Factory made solid panel FRP moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by Engineer-in-Charge.\n Make :- Sintex / Rajshree / Accucel | 16 | Sqm | |
| 38 | 38 | Supplying & fixing 100mm size stainless steel butt hinges complete all as specified and directed by Engineer-in-Charge. | 63 | Each | |
| 39 | 39 | Supplying & fixing 150 mm long brass metal barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge. | 42 | Each | |
| 40 | 40 | Supplying & fixing 125mm size brass metal handles, fabricated type anodised complete all as specified and directed by Engineer-in-Charge. | 42 | Each | |
| 41 | 41 | Supplying & fixing brass metal sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of length 300 mm complete all as specified and directed by Engineer-in-Charge. | 9 | Each | |
| 42 | 42 | Supplying & fixing Anodised aluminium anodised frame (minimum thickness of anodising 15 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge. | 750 | K g | |
| 43 | 43 | Supplying & fixing aluminium anodised section 15 micron for window (Sliding typpe) / ventilator (Partly fixed party louverd type) etc of anodised aluminium section ventilators partly fixed partly louvered type comprising frame, shutters, locking arrangements including necessary jamming, glazing pins, neoprene beading, glazing pin screw, levered aluminium sections for louvered glass, rollers , handle complete all as specified and directed by Engineer-in-Charge.\nNote: (a) Glazing shall be measured separately. \n(b) Item shall be paid as per weight of aluminium section. \n(c) Rate quoted shall be inclusive of neoprene beading, glazing clips, screw etc as required which not be measured for arriving the weight. \n(d) Rate shall be inclusive of the aluminium handle, locking arrangement including complete all as specified and directed. packing with silicon gel around contecting surface of aluminium and including matching the existing surface area complete all as specified and directed. all as specified. \n(e) Aluminium window / ventilator etc to be fixed with cadmium plated screw not more than 300mm c/c . \n | 650 | kg | |
| 44 | 44 | Supplying & fixing anodised aluminium (minimum thickness of anodising 15 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws complete all as specified and directed by Engineer-in-Charge. | 35 | Sqm | |
| 45 | 45 | Supplying & fixing in repairs anodized aluminium DECO grills 7.5mm thick, as existing grills, DG - 102 including aluminium anodized F section complete all as specified and directed by Engineer-in-Charge. | 30 | Sqm | |
| 46 | 46 | Supplying & fixing 5.5 mm thick frosted glass ordinary quality in square not exceeding 0.50 Sqm each fixed to aluminium window frame complete all as specified and directed by Engineer-in-Charge. | 72 | Sqm | |
| 47 | 47 | Excavating in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed by Engineer-in-Charge. | 109 | Each | |
| 48 | 48 | Material & labour for cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge. | 12 | Cum | |
| 49 | 49 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge. | 10 | Cum | |
| 50 | 50 | Material & labour for brickwork with subclass ‘B’ bricks, straight or curved on plan not exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. | 10 | Cum | |
| 51 | 51 | Material & labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. | 221 | Sqm | |
| 52 | 52 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge.. | 210 | Sqm | |
| 53 | 53 | Material & labour for Sand faced cement plaster 20 mm thick in two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, having minimum composition of C:S (1:4) using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanIcal mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 12 mm thick and finishing coat of 8 mm thick final rendering,including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing etc complete all as specified and directed by the Engineer-in-Charge | 110 | Sqm | |
| 54 | 54 | Material & labour for two coat of rain coat pidilite or equivalent exterior grade over a one coat of primer including prepartion of newly plasterd surfaces of walls etc all specified on external surfaces complete all as specified and directed by Engineer-in-Charge.\nMake :- Asian Paint (Apex) / Nerolac (1sr quality) / Dulux (weather shield) | 110 | Sqm | |
| 55 | 55 | Material & labour for plastering 15 mm thick on other than fair faces of brickwok or concrete surfaces of wall in CM (1:6) and finishing the surface even and smooth without using extra cement and finally providing sagol finish complete all as specified and directed by Engineer-in-Charge. | 210 | Sqm | |
| 56 | 56 | Complete removal of existing treatment of wall by washing, rubbing down complete all as specified and directed by Engineer-in-Charge. | 550 | Sqm | |
| 57 | 57 | All as per item No 56 above but of ceiling complete all as specified and directed by Engineer-in-Charge. | 850 | Sqm | |
| 58 | 58 | Preparing old and New plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening with wall putty complete all as specified and directed. Make :- Asian paints / Nerolac paints / Shalimar Paints | 1425 | Sqm | |
| 59 | 59 | Dismantling Asbestos cement (corrugated / semicorrugated) sheets in roof coverings complete all as specified and directed by Engineer-in-Charge. | 80 | Sqm | |
| 60 | 60 | Supplying & fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. | 80 | Sqm | |
| 61 | 61 | Material & labour for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc using Fe-410-W or Gde E-250 complete all as specified and directed by Engineer-in-Charge. | 1850 | Kg | |
| 62 | 62 | Preparaing of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. Make :- Asian paints / Nerolac paints / Shalimar Paints | 150 | Sqm | |
| 63 | 63 | Material & labour for stainless steel letters of height 30 cm and cross sectional size 25mm x 15mm with closed ends, made out of 1.50mm thick stainless steel plate, including necessary cutting, welding, rounding etc and fixing at a height of maximum 3.00m complete all as specified and directed by Engineer-in-Charge. | 18 | Each | |
| 64 | 64 | Material & labour for stainless steel letters of height 60 cm and cross sectional size 75mm x 35mm with closed ends, made out of 1.50mm thick stainless steel plate, including necessary cutting, welding, rounding and fixing at a height of maximum 10.00m complete all as specified and directed by Engineer-in-Charge. \nNote for item Nos :- 63 &64. Letter font size and wording shall be as decided by GE. | 12 | Each | |
| 65 | 65 | Dismantling old unserviceable stainless steel railing etc complete all as specified and directed by Engineer-in-Charge. | 0.5 | Qtl | |
| 66 | 66 | Material & labour for stainless steel special alloy grade 316 TI pipes, Hollow section , any dia & thickness as in railling, ladder incl bending to required shape, cutting, notching organ welding, riding and drilling counter sunk holes and bending to required shape by mechanical means in factory as per site requirement without forming wrinkles and butting and polishing all as complete all as specified and directed by Engineer-in-Charge. | 922 | Kg | |
| 67 | 67 | Excavating over areas, not exceeding 1.5 m deep exc. 10 Sqm on plan and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge. | 12 | Cum | |
| 68 | 68 | All as per item No " 67 " above but beyond 1.5 mtr of depth" exc. 10 Sqm on plan complete all as specified and directed by Engineer-in-Charge. | 1 | Cum | |
| 69 | 69 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed by Engineer-in-Charge. | 230 | Cum | |
| 70 | 70 | Removing excavated material not exceeding. 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge. | 96 | Cum | |
| 71 | 71 | Material & labour for cement concrete (1:4:8) type D-2 (using 40 mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge. | 2 | Cum | |
| 72 | 72 | Material & labour for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded aggregate) as in column footings etc complete all as specified and directed by Engineer-in-Charge. | 3.5 | Cum | |
| 73 | 73 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns,and similar work vertical or to batter complete all as specified and directed by Engineer-in-Charge. | 8 | Sqm | |
| 74 | 74 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Engineer-in-Charge. | 20 | Sqm | |
| 75 | 75 | Material & labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. | 3246 | Kg | |
| 76 | 76 | All as per item No 75 above but 5 mm dia and over upto 10 mm dia as in stirrups etc complete all as specified and directed by Engineer-in-Charge. " | 1380 | Kg | |
| 77 | 77 | Material & labour for framed work such as gates etc ornamental and intricated designed and similar work conforming to Fe.290.(Gde-E-165) including stops, hand-made sliding bolts, pintel hinges etc complete all as specified and directed by Engineer-in-Charge. | 700 | Kg | |
| 78 | 78 | Preparing steel surfaces old over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. | 30 | Sqm | |
| 79 | 79 | Supplying & fixing stainless steel hangers 400 mm long consisting 5/6 hooks on each fixed with screws on wall complete all as specified and directed by Engineer-in-Charge. | 12 | Each | |
| 80 | 80 | Dismantling of fencing posts or struts (wood, steel or RCC) any section embedded in concrete, brick work, masonry etc, including taking out embedded portion and making good disturbed ground complete all as specified and directed by Engineer-in-Charge. | 177 | RM | |
| 81 | 81 | Dismantling of fencing wire mesh, barbed wire fencing, any type complete all as specified and directed by Engineer-in-Charge. | 364 | Sqm | |
| 82 | 82 | Excavation in trenches not exedding 1.5 m wide and not exceeding 1.5m, for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 sqm on plan and not exedding 1.5m in depth and getting out in depth in hard / dense soil complete all as specified and directed by Engineer-in-Charge. | 61 | Cum | |
| 83 | 83 | Material & labour for cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge. | 10 | Cum | |
| 84 | 84 | Material & labour for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass complete all as specified and directed by Engineer-in-Charge. | 28 | Cum | |
| 85 | 85 | Material & labour for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in columns pillars, posts and struts etc complete all as specified and directed by Engineer-in-Charge. | 17 | Cum | |
| 86 | 86 | Material & labour for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, lintels over 1.5 m spancomplete all as specified and directed by Engineer-in-Charge. | 14 | Cum | |
| 87 | 87 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat surfaces complete all as specified and directed by Engineer-in-Charge. | 207 | Sqm | |
| 88 | 88 | Use and waste of formwork to the sides of pillars, posts, struts, piers, columns complete all as specified and directed by Engineer-in-Charge. | 193 | Sqm | |
| 89 | 89 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed by Engineer-in-Charge. | 143 | Sqm | |
| 90 | 90 | Returning, filling in including, spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/desintegrated rock complete all as specified and directed by Engineer-in-Charge. | 21 | Cum | |
| 91 | 91 | Material & labour for Plastering on concrete surfaces of beams, lintels, walls etc, 20mm thick (15+5mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified (WPC to be mixed in setting coat only and shall be measured and paid separately) complete all as specified and directed by Engineer-in-Charge. | 898 | Sqm | |
| 92 | 92 | Material & labour preparing newly plastersed surfaces of wall and soffits/sides of chajja/roof projection and applying two coat of acrylic paint exterior grade (100%Acrylic) over a coat of primer complete all as specified and directed by Engineer-in-Charge. | 898 | Sqm | |
| 93 | 93 | Material & labour for granite tile 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite store including cutting and polishing etc including 15 mm thick screed bedding layer in CM (1:4) complete all as specified and directed by Engineer-in-Charge. | 935 | Sqm | |
| 94 | 94 | Material & labour for granite tile 20mm thick in verticle surfaces as in steps/riser etc machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite store including cutting and polishing etc including 10 mm thick rendering in CM (1:3)complete all as specified and directed by Engineer-in-Charge. | 260 | Sqm | |
| 95 | 95 | Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer-in-Charge. | 480 | R M | |
| 96 | 96 | Extra for forming grooves over granite or kota stone slab as in staircase complete all as specified and directed complete all as specified and directed by Engineer-in-Charge. | 1760 | R M | |
| 97 | 97 | Supplying & fixing 3 mm thick Aluminium composite panel cladding plain of approved colour/ shade to facia of slab/beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour, with and including aluminium square tubular hollow section 25 x 25 mm not exceeding 900 mm c/c on MS pipe purlin/rafter/column beam/slab to hold ACP cladding etc. (Note:- Colour/ Pattern of ACP sheet shall be as approved by GE) complete all as specified and directed by Engineer-in-Charge.. | 220 | Sqm | |
| 98 | 98 | Supplying, install, testing and commissioning of LT panel board mounted on angle iron frame 40 mm x 40 mm x 5mm grouted on floor/foundation, cubical outdoor type for 415V, 3 phase, made of 3mm thick, CRCA sheet weather, vermin proof factroy fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 600 Amps rated bus bar, top and bottom cable entry with provisions of thimble/ lugs and necessary framework and PCC foundation all as directed comprising of following :-\n(a) MCCB, FP 400 Amps 36 kA with thermal release, lcs = 100% lcs,-01 Nos, Make-Legrand/Siemens\n(b) MCCB, FP, 160 Amps 25 kA, with thermal release, lcs = 100% lcs,-05 Nos, Make-Legrandlsiemens/Schneider.\n(c) MCCB, FP, 100 Amps 25 kA, with thermal release, les =100% lcs,-02 Nos, (For Future expension) Make-Legrand/Siemens/Schneider.\n(d) Copper Bus bar, 300 Amps Rated-R, Y, B & N-01 Set\n(e) Digital Ammeter-01 No. Make-AE, MECO, C & S\n(D Digital Voltmeter-01 No Make-AE, MECO, C & S\n(f) Phase indicator lamp R, Y & B\n\n\n | 1 | Each | |
| 99 | 99 | Supplying and fix 600 amp, 4 pole MCCB 50 KA, with thermal release lcs=100% Ics,-01 Nos,in Existing panel for tapping power Supplying complete all as specified and directed by Engineer-in-Charge., Cat No-4220 07 of Make :- Legrand or equivalent of Siemens / Schnider. Note :- Quoted rate should include necessary alteration to existing panel for fixing MCCB | 1 | Each | |
| 100 | 100 | Supplying and installation testing and commissioning of 30-34 mtr height high mast, mast shaft shall be in four sections, hot dip galvanised and suitable for wind velocity 44 m/s as per IS 875. It shall also include accessories for high mast including head frame, steel wire rope 6 mm dia (7/19 construction),\n trailing cable, double drum winch, galvanised lantern carriage arrangement suitable for 15 luminaires asymmetrically & its control gear boxes and lightning finial. The mast shall have an integral powertool installed inside the base compartment for its operation.It should consist of twin type LED aviation obstruction light for each high Mast light complete and RCC foundation as per manufacturers specification and eraction including making fencing to the high mast foundation with plastering, Brick work finishing with green marble and fencing with stainless steel hand railing as required and Testing and commissioning as directed and specified. Counterweight should be included in offer. Rate deemed to be inclusive of the following items :- Approved Make :- Philips, Valmont & CGL\n | 4 | Each | |
| 101 | 100.01 | Note :- All the quality parameters should be as per appendix of PS, where in the designing calculations and requirements parameters is mentioned.\nRate deemed to be inclusive of the following items :- \n(a) Twin type LED Aviation Lights for each high mast tower as per DGCA guidelines.\n(b) Feeder Piller distribution box for each high mast tower( as per OEM specification)\n(c ) Winch motor for each high mast tower ( as per OEM specification)\n(d) Local control station for winch motor alongwith 5 mtr length 5Cx2.5Sqmm\n(e) Flaxible trailing cables for LED flood lights, LED aviation lights and earthing.\n(f) Cable glands and plugs for unused entries.\n(g) Supplying of foundation bolts manufactured from special steel alongwith nuts, washers, anchor plates and templates etc. for HM mentioned.\nMake :- Philips/CG/ Valmount\nNote :- Rate deemed to be inclusive of providing RCC foundation as per manufacturer instruction alongwith granite work at plateform according to site conditions and wind pressure, earth work, excavation and inclusive of LED Flood light . (ii) The contractor has to submit the specification of High Mast Structure and drawing of foundation for approval of Garrison Engineer. (iii) Luminaires housing shall be made of non corrosive high pressure ADC with corrosion resistant powder coating. | |||
| 102 | 101 | Supplying and fix steel tubular poles type 410 SP-31 (9.00 metres long) complete with CI base plate and finial taper plug, bolts,nuts,screws complete all as specified and directed by Engineer-in-Charge\nNote: The foundation and coping shall be measured and paid in respective item of this BOQ. | 4 | Each | |
| 103 | 102 | Supplying and installation of LED Flood light 195 with Lumens output of 23500 and Efficacy of 120 Lum/wt. Flood light should have CCT of 5700K. CRI : 70, CM <5, Electrical Insulation should be of Class-I type, IP 66 and IK08 Ratings ( Certificates should be produced), Flood Light should have 4KV Internal and 10KV External, Housing should be pressure Die Cast Housing / Anti Dust Exposed Lens, THD =10% (At Full Load) with Exposed Lens Optics-Polycarbonate type,life of Flood light shoudl be of L70B50 @ 50K Hrs.@ 35 Degree Ambient with Anti Corrisive paint, & Driver should be protected by 440V (P2P)Protection for 8 Hrs., High cut off @ 325±15V, Operating Voltage should be of 120-277V complete all as specified and directed by Engineer-in-Charge.\n Make: Philips BVP483 LED235 CW SWB PSU GR or Equivalent in Bajaj- Disano / OSRAM. (For Basketball ground ) as approved by GE.\n | 16 | Each | |
| 104 | 103 | Supplying and installation of SMD LED Flood Light with minimum 45000 Lumens (at system level) with C clamp mounting and The luminaires housing shall be made of non-corrosive high pressure ADC with corrosion resistant powder coating, MCPCB ; U-shaped bracket; RAL 9007(Housing),Anti-dust exposed Lens, Impact resistance IK 08,IP66, system Power : 400 watt , Integrated Driver Efficacy :> 90% , Life L70 , 50K Hrs , color temp : 5700K , Luminaire efficacy 110 lumen/Watt at system level, Surge protection of 10 KV, Heat dissipation / heat sink : Well designed Thermal management system with PDC Aluminum heat sink, Gravity die cast shall not be accepted,with Fins on the back to ensure good heat dissipation; which will create airflow around the housing to prevent dirt from settling on the luminaire, with lighting distribution options of Narrow/Asymmetrical wide / Symmetrical wide, Class B Serviceability,Electrical safety & Conformation standards of luminaire : The luminaire should have graduation disk for aiming, LED flood light fitting should be supplied with BAR CODE which should be attached permanently to the fitting with company logo Engraved on it, LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters The luminaire should have proper IES files for submission. The luminaire should be IEC60598 certified. Luminaire should be BIS Certified, There should optional coating available for extra protection in harsh environment such as salt atmospheres (harbours, coastal areas etc) Make - Philips. Model- BVP383 LED 450CW 400W NB / SWB. Or equivelent in OSRAM / Bajaj- Disano.\nLED Chip make : CREE / Nischia / Lumileds as approved by GE. | 60 | Each | |
| 105 | 103.01 | The Lighting Proposal should contain below components for Sitting Areas as per the site conditions and BOQ.\n(i) 6 Numbers of 80 W Highbays with 10000 Lumens output. Equivalent to Philips BY325P LED100S NW PSD GR FG WB XTFCL V1 (80W, 10000lm LED Surface/Suspended DALI dim Highbay)/ Equvalent in OSRAM / WIPRO.\n(ii) Dali Dimmable Controller Equivalent to Philips DDBC 120- DALI (DALI driver controller)\niii) Keypad Controller Make: Philips DYNALITE PABPE & DACM ANTUMBRA (Touch panel)\niv) Relay Controller DDNP 1501 (Network Power Supplying) if required DDRC 1220 FR-GL.\n(v) Network Controller Make: Philips DDNP 1501 (Network Power Supplying) if required\n(vi) Philips Software. Note :- All the quality parameters shoudl be as per appendix of PS, where in the desing calculations and requirements parameters is mentioned | |||
| 106 | 104 | Supplying, Fixing, testing and commissioning of XLPE UG Cable of following sizes PVC insulated armoured, heavy duty electric cabe with aluminium conductor laid in trenches, fixed on wall, passing through pipes complete including connecting with MCCB/ busbar with the help of proper size thimble, glands complete all as specified and directed by Engineer-in-Charge:- | |||
| 107 | 104.01 | 95 sqmm 3.5 core | 250 | RM | |
| 108 | 104.02 | 50 sqmm 4 core | 500 | RM | |
| 109 | 104.03 | 16 sqmm 4 core | 300 | RM | |
| 110 | 104.04 | 500 sqmm 3.5 core | 40 | RM | |
| 111 | 105 | Excavation in trenches not exc 1.5 mtr wide and not exc1.5 mtr in depth for laying of cables etc. in any type of soil and getting out all as specified and directed by Engineer-in-Charge. \nNote :- Rate includes removing of paver blocks carefully and stack properly for refixing after laying of cables . | 248 | Cum | |
| 112 | 106 | Supplying and lay High Density polythelene(HDPE) pipes of pressure rating 4 kgf/sq. cm 90mm dia with required bend and fittings for cable protection of cable above or below ground surface including taking out old unserviceable pipe all as specified and directed. | 220 | RM | |
| 113 | 107 | All as per item No 106 above but for 75mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed. | 450 | RM | |
| 114 | 108 | All as per item No 106 above but for 40mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed. | 250 | RM | |
| 115 | 109 | Material and labour for maintainance free environment friendly earth electrode set comprising of 17.2mm dia, 3 mtrs long rod of low carbon steel molecular copper bounded for a thickness of 250 micro OHMS, highly conductive ANSI/NSF STD-60 certified carbon bound backfill compound which shall set like concrete according to BS 7430 & IEEE 80 (each bag shall contain 50 lbs) all as directed by Engineer-in-Charge. Make- JEF Ecosafe or equivalent as approved by GE. | 18 | Each | |
| 116 | 110 | Material & labour copper strip 20 x 3mm burried in ground or fixed on walls/floor with suitable saddles and screws to earth lead connecting with test point all as specified and directed by Engineer-in-Charge. | 25 | RM | |
| 117 | 111 | Supplying & fixing test point terminal block for connecting the earth pit and down conductor or Aluminium/copper strip, made of gun metal or phosphorus bronze size 75 x 75 x 25mm drilled and screwed including 3 Nos 8mm dia 25mm long head screw all as specified and directed by Engineer-in-Charge | 18 | Each | |
| 118 | 112 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc and making good disturbed surfaces of walls, floors, etc.\n\n | 16 | Point | |
| 119 | 113 | M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of PVCmoduler box with cover plate in any size fixed on wall for fixing the switches, switch sockets,sockets, regulators etc complete all as specified and directed for:-\nNOTE: a) Colour coding shall be followed as given below:-\n i) Phase - Red/Blue/Yellow\n ii) Neutral - Black\n iii) Earth - Green\nb) Electrical wiring above false ceiling shall be drawn \n through medium grade PVC conduit. (c) Make of wire : Polycabl/Plaza/Havells/Gloster (d) Caping casing make : Asian/modi/Precision/National | |||
| 120 | 113.01 | One light point controlled by one switch | 10 | Point | |
| 121 | 113.02 | One fan point controlled by one switch | 4 | Point | |
| 122 | 113.03 | One 3 pin socket outlet, 5 Amps, independent board | 2 | Point | |
| 123 | 114 | Supplying & fixing switch piano, flush type, single pole one way 5 Amp complete all as specified and directed by Engineer-in-Charge. | 14 | Each | |
| 124 | 115 | Supplying & fixing socket outlet 2 in 1, 5A flush type complete all as specified and directed by Engineer-in-Charge. | 2 | Each | |
| 125 | 116 | Supplying & fixing ceiling rose, 3 terminal/PVC/polycarbonate, isolated body complete all as specified and directed by Engineer-in-Charge. | 14 | Each | |
| 126 | 117 | Taking down unserviceable FTL and Supplying and fix Slim LED intigrated batten of 20Watt 4ft coolday light with powder coated CRCA decorative patti prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings including new ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x20mm complete all as specified and directed by Engineer-in-Charge\nMake of Light Fitting : C&S Cat Part No LTTB4F20WLED/W or BN 021C LED 20S PSU CW GR S2 of Philips or BCLSB20 WH of Bajaj | 10 | Each | |
| 127 | 118 | Supplying and fix in replacement energy saving and environemntal friendly long life versatile pressure die-cast aluminium Ip-66 Flood Light Iuminaire 150/160 W LED fitting with high power LEDs light source and electronic driver complete all as specified and directed by Engineer-in-Charge.\nCat- BARFEG160WLED of Make : Bajaj or equivelent in Wipro, Philips, C & S. \n | 17 | Each | |
| 128 | 119 | Taking down old U/S exhaust fan and Supplying and fix Exhaust Fan 300mm sweep, 240 volt, heavy duty, 1400 RPM, iron Body including suitable louver and electrical connection complete all as specified and directed by Engineer-in-Charge.Make - Hevells model-Turbo Force SP or equivalent in Khaitan/USHA/Almonard. | 4 | Each | |
| 129 | 120 | Taking down old U/S Highbay lights and Supplying and fix LED 200W Highbay luminaire with diffuser . Cat No-BGHB200WLEDGIV of Make-Bajaj or equivelent in Havells, WIPRO. | 20 | Each | |
| 130 | 121 | Supplying/fixing in repair / replacement of internal steel water tubing, galvanished, medium grade with all fittings in shaft such as nipple, union, socket, elbow, bends, fixed to wall including necessary & capacity in short piece / length including breaking the existing brick wall for replcement of corroded GI pipe in on wall and marking good the distrubed surface complete all as specified and directed by Engineer-in-Charge. \nMake :- Jindal / TATA / Swastic | |||
| 131 | 121.01 | 15 mm bore | 200 | RM | |
| 132 | 121.02 | 20 mm bore | 60 | Rm | |
| 133 | 121.03 | 25 mm bore | 50 | Rm | |
| 134 | 121.04 | 40 mm bore | 200 | RM | |
| 135 | 122 | Supplying and fixing in repair stop cock, brass, screwed down with crutch or butterfly handle for GI tubing 15 mm dia bore including necessary clamp & saddles complete all as specified and directed by Engineer-in-Charge. \nMake :- Zoloto / Seiko / Leader | 32 | Each | |
| 136 | 123 | Supplying and fixing in repairs bib cock, brass with crutch or butterfly handle screwed both ends for GI tubing 15 mm dia bore including necessary clamp & saddles complete all as specified and directed by Engineer-in-Charge\nMake :- Zoloto / Seiko / Leader | 32 | Each | |
| 137 | 124 | Supplying and fixing in repair brass float valve (ISI marked) high pressure with polythelene float (flat) and fly nut complete screwed for GI pipe 40 mm bore including GI fittings such as elbow, reducer, nipple etc complete all as specified and directed by Engineer-in-Charge.. Make :- Parag / Leader/ Zoloto | 3 | Each | |
| 138 | 125 | Supplying and fixing in repair / replacement of gun metal gate valve in existing line in position with iron wheel head class-I, made out of brass, screwed both ends for GI pipe with union, ISI marked complete all as specified and directed by Engineer-in-Charge of the following size. Make Zoloto / Seiko / Leader | |||
| 139 | 125.01 | 15 mm bore | 8 | Each | |
| 140 | 125.02 | 40 mm bore | 4 | Each | |
| 141 | 126 | Supplying and fixing hosting PVC water storage three layer 100% UV stabilised, protection against algae formation, antibacterial tank 500 ltr capacity dia 78.3'' manhole 20.1'' in position at any location including all fitting and foundation disconecting existing tank connection all incoming and outgoing connection provision of new tank fitting and connecting it at existing position upto 50 mm GI connection complete all as specified and directed by Engineer-in-Charge.\nMake :- Sintex / Polycon / Ashish | 3 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
