Special Repair To Bldg No T 10 And Replacement Of Corrugated Asbestos Sheets To Galvanium Sheet Of Otm Bldg No T 15 And T 37 At Mil Stn Banbasa Under Ge Mes Pithoragarh
Tender Value
27 Lakhs
Estimated cost
Bid Submission
08 Mar 2021
0 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Banbasa → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Bldg No T 10 And Replacement Of Corrugated Asbestos Sheets To Galvanium Sheet Of Otm Bldg No T 15 And T 37 At Mil Stn Banbasa Under Ge Mes Pithoragarh
BOQ
| Name of Work: SPL REPAIR TO BLDG NO T 10 AND REPLACEMENT OF CORRUGATED ASBESTOS SHEETS TO GALVANIUM SHEET OF OTM BLDG NO T 15 AND T 37 AT MIL STN BANBASA UNDER GE MES PITHORAGARH | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 0.05 | DESCRIPTION OF ITEMS | |||
| 2 | 1 | Dismantling of corrugated or semi corrugated asbestos cement sheets in roof covering including ridges, hips, valley etc complete all as specified and directed. | 1470 | Sqm | |
| 3 | 2 | Dismantling of ceiling board of any description including cover fillets complete all as specified and directed. | 270 | Sqm | |
| 4 | 3 | Dismantling timber scantling 40 Sq cm and over framed work in any position complete all as specified and directed. | 9.5 | Cum | |
| 5 | 4 | Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, copings etc. built in cement mortar or cement lime mortar complete all as specified and directed. | 2 | Cum | |
| 6 | 5 | Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and including removal of debris from site all as specified and directed | 2 | Cum | |
| 7 | 6 | Taking down chowkats of any description without taking of shutter from the frame not exceeding 1.5 sqm complete all as specified and directed. | 3 | Each | |
| 8 | 7 | Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm complete all as specified and directed. | 4 | Each | |
| 9 | 8 | Taking down shutter of any description not exceeding 1sqm complete all as specified and directed. | 15 | Each | |
| 10 | 9 | Taking down shutter of any description exceeding 2 sqm and complete all as specified and directed. | 5 | Each | |
| 11 | 10 | M & L for Brick work built in CM 1:6 with sub class old size bricks straight or curved on plan exceeding 6 m mean radius all as specified and directed.\n\n | 2 | Cum | |
| 12 | 11 | S & F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and as directed. | 5450 | Kg | |
| 13 | 12 | M & L for suspended for ceiling system using chicago metallic E grid exposed suspended system of grid/section size 600x600mm comprising of GI powder coated main 39x24x0.8 mm thick (thickness comprising of GI/0.40+PPGS/0.3) cross TEE 29X24X0.8mm thick and wall angle 22.2x22.2x0.65mm thick with and including 4mm thick HPSC preprimed self embossed texture design board to be placed in the grid system duly suspend with 6mm dia GI wire hangers fixed with steel door fastness or from perlin of the roof with clip complete all as speceified and directed. | 270 | Sqm | |
| 14 | 13 | S & F of mild steel hold fast, fan hooks, wind tie, cleat, bolt, guard bar etc of F.I. confirming to Fe 290, Gde-E-165 complete all as specified and directed. | 200 | Kg | |
| 15 | 14 | S & F pre-painted Trapezoidal profile galvalume aluminium zinc coating steel sheet 0.50mm thick (base metal thickness) of any colour having tensile strength of 550 Mpa minimum yield strength conforming to IS - 513 (1994) coated with hot dip alloy of 55% aluminium + 43.50%Zinc +1.50% silicon and finished with resin coat ( of thickness not less than 35 micron) on both surface @150gm/sqm of coating (total both surfaces) of approved colour as in roof covering/cladding, fixed with self tapping screws (make hilty/fissers), neoprene and epdm washers class 3 of AS-3566(5.5-14X5 for crest and 5.5-14X25 for valley fixed) with 150mm end lap and one corrogation side lap whereever required penetrations and lap in sheet shall be sealed by using proper sealant profile/HDPE fillers shall be provided whereever required to close voids between sheets and fastners etc. as in roof covering/ cladding in straight or curved surface in any height complete all as specified and directed. \nNote : The colour of sheet shall be approved by GE. | 1470 | Sqm | |
| 16 | 15 | Ditto all as per Item No. 14 above but for plain sheet as in roof ridges/clading to wall etc. complete all as specified and directed. | 100 | Sqm | |
| 17 | 16 | Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc all as specified and directed. | 270 | Sqm | |
| 18 | 17 | M & L for machine cut Kota stone slab flooring 20-25mm thick over and including 20mm thick screed bed in cement mortar 1:6 laid and bedded jointed cement slurry mixed with pigment to match to shade of the slab incuding grinding, mirror polishing complete all as specified and directed. | 270 | Sqm | |
| 19 | 18 | M & L for machine cut Kota stone slab 20-25mm thick as in dado, riser of steps, skirting, and including 15mm thick rendering as backing coat of kota stone CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match to shade of the slab incuding cutting grinding mirror polishing complete all as specified and directed. | 12 | Sqm | |
| 20 | 19 | Taking down cement plaster of any description in any position incl racking out joints making for key, scrubbing down with water etc and removal of debris from site all as specified and directed. | 240 | Sqm | |
| 21 | 20 | M & L for rendering in CM 1:4 on walls 15mm thick on fair faces of brick work or concrete surface finished the surface even and smooth with out using extra cement complete all as specified and directed. | 200 | Sqm | |
| 22 | 21 | M & L for rendering 15mm thick on other than fair faces in CM 1:6 finished the surface even and and smooth with out using extra cement complete all as specified. | 60 | Sqm | |
| 23 | 22 | M & L for 2nd classs hard wood plain solid straight chowkats and frame wrought, framed double rebated on the solid put together with glue, pinned at joints and fixed in position complete all as specified and directed. | 0.25 | Cum | |
| 24 | 23 | S & F of 35mm thick IInd class hardwood framed panelled shutters (two number of panels)with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces, as per IS 1003 kiln seasoned and chemically presure treated all as specified and directed. | 6 | Sqm | |
| 25 | 24 | M & L for 30mm thick 2nd class hard wood glased shutter divided into square with plain,chamfered or rounded mitered and rebated sash bar any numbers, fitted with cut and mitred beads for securing glass etc and fitted to chowkat all as specified and directed. | 10 | Sqm | |
| 26 | 25 | M & L for 35mm thick 2nd class hard wood wire gauged shutter open rebated prepered to receive glass, gauze etc with out sash bars chamfered or rounded fitted with cut and mitred beads for security glass etc size of members of shutters as specified and fitted to chowkat complete all as specified and directed. | 10 | Sqm | |
| 27 | 26 | M & L for cement concrete type C2 (1:3:6) using 40mm graded aggr 75mm thick for plinth, path, make surface fair and even w/o using extra cement etc protection complete all as specified and directed. | 40 | Sqm | |
| 28 | 27 | M & L for preparation of old treated surfaces of wall by washing, rubbing down and applying 1mm thick wall care putty finish surface even and smooth and two coats distemper oil emulsion complete all as specified and directed.\n | 240 | Sqm | |
| 29 | 28 | M & L for preparation of old treated surfaces by brooming down or steel wire brushing, and applying two coats of cement base paint over a coat of primer on complete all as specified and directed.\n | 120 | Sqm | |
| 30 | 29 | M & L for two coats of cement base paint over a coats of primer on new surface including preparation of surface complete all as specified and directed. | 200 | Sqm | |
| 31 | 30 | M & L for applying two coats of distemper over one coat of primer including preparation of new plastered surface of wall after applying wall care putty 1mm thick to finish surface even and fare complete all as specified and directed. | 60 | Sqm | |
| 32 | 31 | Hacking out old broken glass (any thickness size quality and discription) for metal frame including punching, drilling out old glazing pins / spring clips and providing new ones complete all as specified and directed. | 7 | Sqm | |
| 33 | 32 | S & F sheet glass of 3mm thick ordinary quality glass and glazing with oil putty in square n exec 0.5 Sqm in each pane complete all as specified and directed. | 12 | Sqm | |
| 34 | 33 | S & F stainless Steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and direceted. | 16 | Sqm | |
| 35 | 34 | S & F in repairs stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and direceted. | 12 | Sqm | |
| 36 | 35 | S & F mild steel But hinges of medium weight and fixed 100mm complete all as specified and direceted. | 18 | Each | |
| 37 | 36 | S & F mild steel But hinges of meedium weight and fixed 75mm complete all as specified and direceted. | 36 | Each | |
| 38 | 37 | S & F aluminium anodised barrel tower bolt 200 mm extruded section complete all as specified and direceted.\n | 24 | Each | |
| 39 | 38 | S & F aluminium anodised barrel tower bolt 100 mm extruded section all as specified and directed.\n | 36 | Each | |
| 40 | 39 | S & F aluminum anodised sliding door bolt 250mm fixing with bolt and sliding bolt of extuded section complete all as specified and direceted. | 14 | Each | |
| 41 | 40 | S & F Extruded aluminum handles fabricated type 150mm complete all as specified and direceted. | 16 | Each | |
| 42 | 41 | S & F Extruded aluminum handles fabricated type 125mm complete all as specified and direceted. | 36 | Each | |
| 43 | 42 | M & L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and direceted.\n\n | 40 | Sqm | |
| 44 | 43 | M & L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of primer red oxide zinc chrome including preperation surfaces complete all as specified and direceted. | 60 | Sqm | |
| 45 | 44 | M & L for preparation of old painted surface of any description not otherwise described, wood and wood based surfaces, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and direceted. | 30 | Sqm | |
| 46 | 45 | M & L for preparation of old painted surfaces of any description steel and iron surfaces, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and direceted.\n | 16 | Sqm | |
| 47 | 46 | M & L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete complete all as specified and direceted. | 20 | Sqm | |
| 48 | 47 | Taking down carefully copper/aluminium point wiring including fittings and fixtures such as switches, ceiling roses, pendants, sockets, etc. and making good disturbed surfaces of walls, floors, etc complete all as specified and direceted. | 114 | Per Point | |
| 49 | 48 | M & L for point wiring complete with 1.5 Sqmm single core multi- stranded copper conductor PVC insulated and unsheathed fire retardant cable 1100 volts grade, IS-694 (ISI marked) drawn through in concealed PVC conduit and all necessary fittings accessories fixed on walls/ceiling etc including shunk type pressed steel terminal boxes with 3.00 mm thick insulated laminated sheet/hylem top covers on walls/box including 1.5 Sqmm PVC insulated unsheathed fire retardant cable 1100 volts grade with multi stranded copper conductors earth continuity conductor to common earth and connected to earth dolly for the following :- | |||
| 50 | 48.01 | One light point/ fan/ exhaust fan point/bell point controlled by one way switch of 5/6 Amps | 74 | Point | |
| 51 | 48.02 | One 5/6 amps socket outlet on the independent board. | 20 | Point | |
| 52 | 48.03 | One 5/6 amps socket outlet on same board with other switch | 18 | Point | |
| 53 | 49 | Supply and Fix Switch piano, flush type, white finish, 5/6 amps, single pole, one way complete all as specified and directed. | 92 | Each | |
| 54 | 50 | Supply and Fix Socket outlet 5 pin, 5/6 amps and flush type, non shutters, non inter locking type, complete all as specified and directed. | 20 | Each | |
| 55 | 51 | Supply and Fix ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed. | 54 | Each | |
| 56 | 52 | Supply and Fixing in replacement of 18 Watt LED tube light fitting single tube, box type surface mounted, (1x18 Watt) complete , spring loaded rotar type lamp holder, connector block etc. with LED tube rod 18W, prewired including making necessary electrical connection with three core copper flexible wire of 0.50 Sqmm from ceiling rose to tube light fitting complete all as specified and directed. \n | 22 | Each | |
| 57 | 53 | S & F in replacement stepped type electronic fan regulator flush type 230 V single phase 120 watt on existing laminated sheet as required complete all as specified and directed. | 26 | Each | |
| 58 | 54 | S & F in replacement sheet metal enclosure double door for DB, TPN 4 way with 200 amps rated bus bar, 415 volts, suitable for housing MCB`s complete all as specified and directed. | 1 | Each | |
| 59 | 55 | S & F in replacement sheet metal enclosure double door for DB, SPN 4 way with 200 amps rated bus bar, 240 volts, suitable for housing MCB`s complete all as specified and directed. | 3 | Each | |
| 60 | 56 | S & F in replacement MCB SPN, 240 volts, 6 to 40 amps, 10KA ‘C’ series complete all as specified and directed. | 3 | Each | |
| 61 | 57 | S & F in replacement MCB TPN, 415 volts, 40 amps, 10KA ‘C’ series complete all as specified and directed. | 1 | Each | |
| 62 | 58 | S & F in replacement MCB SP, 240 volts, 6 to 30 amp, 10 KA ‘C’ series complete all as specified and directed. | 18 | Each | |
| 63 | 59 | S & F lamp holder PVC/polycarbonate type with metal ring and back plate suitable for batten fittings. | 20 | Each | |
| 64 | 60 | Supply and Fix in replacement of LED security light luminaire comprising of epoxy powder coated housing enclosed with glass cover in frame 45 W and making electric connection with 2 core 1.5 sqmm PVC copper stranded conductor cable complete all as directed.\n | 6 | Each | |
| 65 | 61 | S & F sub main wiring in replacement with two single run of 6 Sqmm single core unsheathed PVC insulated fire retardant (FR) cable, 1100 volts grade multi stranded copper conductor drawn through in & including PVC conduit of 25 mm or higher dia including all necessary conduit accessories, surface type including one run of 4 Sqmm stranded copper conductor PVC insulated fire retardant (FR) cable as earth wire connected to common earth dolly complete all as specified and directed.\nNote: Two runs of 6Sqmm and one run of 4Sqmm and one run of PVC conduit shall be measured as one unit. | 23 | RM | |
| 66 | 62 | Excavation in trenches not exc 1.5m wide and n. exc 1.5M deep for laying of cable and getting out for soft / loose soil complete all as specified and directed. | 11 | Cum | |
| 67 | 63 | Removing excavated material n exc 50m and depositing at a level n.exc 1.5M above ground complete all as specified and directed. | 6 | Cum | |
| 68 | 64 | Returning/filling in layers, spreading leveling, watering and well ramming in layers n.exc 25 m in sof/loose soil complete all as specified and directed. | 5 | Cum | |
| 69 | 65 | M & L for sand cushioning for protection of PVC / XLPE cable, firstly spread the sand into trench at least 8 cm height and then lay the cable over sand and cover with sand at least 15 cm height and punned manulay complete as specified and as directed.\n Note : The punned thickness of sand will be measured only. | 4 | Cum | |
| 70 | 66 | Supply and laying burnt bricks sub class B of old size laid dry in trenches for cable protection complete as specified and as directed. | 0.4 | Per 1000 Nos | |
| 71 | 67 | Supply and Fix in replacement GI tubing light grade of size 40mm for protection of cable, and bracket for in comming and out going of cable in trenches/on pole complete as specified and as directed. | 21 | Rm | |
| 72 | 68 | Supply, laying and testing in replacement of XLPE cable Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade and confirming to IS 7098 Part -I with stranded aluminium conductor of size 16.0 sq mm 4 core complete as specified and as directed. | 50 | Rm | |
| 73 | 69 | M & L for Earthing in replacement complete with GI earth plate electrode 600x600x6.0mm thick burried directly in ground (Earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to GI earth wire 4 mm dia by means of bolts , Nuts, checknuts and washers of galvanised iron or steel and panel /DB/ Pole complete including PCC masonry pit of 300 x 300 x300 mm interior diamentions in PCC 1:2:4 type 'B1' RCC Cover with GI frame , charcoal and common salt 15 cm in layers all arround the earthplate, 15 mm dia GI pipe light grade for protection of GI wire and 20 mm dia GI pipe light grade for watering purpose and a funnel with wire mess should be provided on top of watering pipe comp all as specified as per Electrical plate No 5 of SSR Part-I 2009 including testing after completion and test result should be less than five ohm complete as specified and as directed. | 1 | Each Job |
AI Tender Summary
Tender Timeline
Feb 15, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 08, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 10, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender