Military Engineer Services-MES has published Repair Maint Of Dg Set T And P Minor B R Repair Of Mes Installations Repair To Rcc Steel Oht High Mast Light Street Light Timer Panel And Connected Items At Saharanpur Under Ge Roorkee And Repair Maint Of Lt Overhead Lines Ug Cables And Capacitor Ban. Submission Date for this Tender is 13-03-2021. Diesel Generators Tenders in SAHARANPUR Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Feb-2021 | THE EXISTING BOQ IS HEREBY REPLACED WITH REVISED BOQ | BOQ | 06-03-2021 |
| 2 | 06-Mar-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-03-2021 |
| Name of Work: REPAIR/MAINT OF DG SET, T&P, MINOR B/R REPAIR OF MES INSTALLATIONS, REPAIR TO RCC/STEEL OHT HIGH MAST LIGHT, STREET LIGHT, TIMER PANEL AND CONNECTED ITEMS AT SAHARANPUR UNDER GE ROORKEE AND REPAIR/MAINT OF LT OVERHEAD LINES, UG CABLES AND CAPACITOR BANK AND CONNECTED ITEMS IN RTS & D SAHARANPR UNDER GE ROORKEE. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | M&L for 'B' check means taking out old unserviceable engine oil from oil sump by openeing the drain plug and well cleaning the oil sump, taking out oil filter,bypass filter and diesel filter (primary and secondary) and replacement the same with new as follows for 63 KVA DG Set (Make :Kirloskar) Engine No.4H3445/120542, Machine No.JC/WC/6205/SIL/867K, Alternator No. ES3AO13B165088 at Pump House No.4 at RTS& Depot Saharanpur including testing and commissioning.\nNote : (a) Spare parts shall be measured and paid separately under respective item No. 2.00 to 9.00 of BOQ, but cost of replacement is deemed to be included in the quoted rates. | 1 | Each Job | |
| 2 | 2 | Supply only of lubricating Oil filter element with seal | 2 | Each | |
| 3 | 3 | Supply only of Fuel filter element with seal | 1 | Each | |
| 4 | 4 | Supply only of Air filter element | 1 | Each | |
| 5 | 5 | Supply only of 'V' belt make Funnder/good year (4PK-1158 EPDM Poly 'V' Belt) | 1 | Each | |
| 6 | 6 | Supply only of Hose pipe, including nut, bolts and clamps | 1 | Set | |
| 7 | 7 | Supply only Oil bypass filter element with seal | 1 | Each | |
| 8 | 8 | Supply only lubricating oil, grade 15W40 (K-oil premium) | 8.5 | Ltr | |
| 9 | 9 | Supply & Filling inhibitor non corrosive coolant including mixed with distilled water as recommended ratio Make :cummins | 12 | Ltr | |
| 10 | 10 | M&L for 'B' check means taking out old unserviceable engine oil from oil sump by openeing the drain plug and well cleaning the oil sump, taking out oil filter,bypass filter and diesel filter (primary and secondary) and replacement the same with new as follows for 30 KVA DG Set (Make :Kirloskar) Engine No.3H3025/1320572, Machine No.JKWL/30/SIL/8363K, Alternator No. 653C013B2506H at Pump House No.2 at RTS& Depot Saharanpur including testing and commissioning.\nNote : Spare parts shall be measured and paid separately under respective item No. 11.00 to 19.00 of BOQ, but cost of replacement is deemed to be included in the quoted rates. | 1 | Each Job | |
| 11 | 11 | Supply only of lubricating Oil filter element with seal | 1 | Each | |
| 12 | 12 | Supply only of Fuel filter element with seal | 1 | Each | |
| 13 | 13 | Supply only of Air filter element | 1 | Each | |
| 14 | 14 | Supply only of poly 'V' belt make Funnder/good year for 3H3025 Model, part No 4H 1493.01.0.00 in user manual of Kirloskar | 1 | Each | |
| 15 | 15 | Supply only of 'V' belt make Funnder/good year A-55 | 1 | Each | |
| 16 | 16 | Supply only of Hose pipe, including nut, bolts and clamps | 1 | Set | |
| 17 | 17 | Supply only Oil bypass filter element with seal | 1 | Each | |
| 18 | 18 | Supply only lubricating oil,cgrade 15W40 (K-oil premium) | 7 | Ltr | |
| 19 | 19 | Supply & Filling inhibitor non corrosive coolant including mixed with distilled water as recommended ratio Make :cummins | 10 | Ltr | |
| 20 | 20 | M&L for 'B' check means taking out old unserviceable engine oil from oil sump by openeing the drain plug and well cleaning the oil sump, taking out oil filter,bypass filter and diesel filter (primary and secondary) and replacement the same with new as follows for 30 KVA DG Set (Make :Kirloskar) Engine No.3H84071720489, Machine No. KG28VL4, Alternator No. CS3S116LP103383 at Vet Wing (OT) at RTS& Depot Saharanpur including testing and commissioning.\nNote : Spare parts shall be measured and paid separately under respective item No. 21.00 to 29.00 of BOQ, but cost of replacement is deemed to be included in the quoted rates. | 1 | Each Job | |
| 21 | 21 | Supply only of lubricating Oil filter element with seal | 1 | Each | |
| 22 | 22 | Supply only of Fuel filter | 1 | Each | |
| 23 | 23 | Supply & Filling inhibitor non corrosive coolant including mixed with distilled water as recommended ratio Make :cummins | 10 | Ltr | |
| 24 | 24 | Supply only of Air filter element element with seal | 1 | Each | |
| 25 | 25 | Supply only of poly 'V' belt make Funnder/good year | 1 | Each | |
| 26 | 26 | Supply only of 'V' belt make Funnder/good year A-55 | 1 | Each | |
| 27 | 27 | Supply only of Hose pipe, including nut, bolts and clamps | 1 | Set | |
| 28 | 28 | Supply only Oil bypass filter element with seal | 1 | Each | |
| 29 | 29 | Supply only lubricating oil, grade 15W40 (K-oil premium) | 7 | Ltr | |
| 30 | 30 | M&L for 'B' check means taking out old unserviceable engine oil from oil sump by openeing the drain plug and well cleaning the oil sump, taking out oil filter,bypass filter and diesel filter (primary and secondary) and replacement the same with new as follows for 20 KVA DG Set (Make :Kirloskar) Engine No. 03-1013/88169 , Alternator No.88PH20-60 at Foaling Line at RTS& Depot Saharanpur including testing and commissioning.\nNote : Spare parts shall be measured and paid separately under respective item No. 31.00 to 39.00 of BOQ, but cost of replacement is deemed to be included in the quoted rates. | 1 | Each Job | |
| 31 | 31 | Supply only of lubricating Oil filter element with seal | 1 | Each | |
| 32 | 32 | Supply only of Fuel filter | 1 | Each | |
| 33 | 33 | Supply only of Air filter element element with seal | 1 | Each | |
| 34 | 34 | Supply only of 'V' belt make Funnder/good year A-44 | 1 | Each | |
| 35 | 35 | Supply only of 'V' belt make Funnder/good year A-55 | 1 | Each | |
| 36 | 36 | Supply only of Hose pipe, including nut, bolts and clamps | 1 | Set | |
| 37 | 37 | Supply only Oil bypass filter element with seal | 1 | Each | |
| 38 | 38 | Supply only fuel line as per existing size or around 2 mtr long complete all as specified | 1 | Each | |
| 39 | 39 | Supply only lubricating oil, grade 15W40 (K-oil premium) | 6 | Ltr | |
| 40 | 40 | Taking down self starter assembly from (20 KVA DG Set) its position and repairing the same by replacement of carbon brush pinion etc. reassembling of all parts refixing in position testing, commissioning complete | 1 | Each Job | |
| 41 | 41 | Taking down dynamo 12 volt from the exisint position, dismantling the same and repairing by turning of commutator replacing the armature, carbon brush varnishing the coil reassembling the parts and refixing in position testing and commissioning including cost of all spare parts required complete all as specified | 1 | Each Job | |
| 42 | 42 | M&L for repairs of battery charging unit including replacement of non functional step down transformer, its electrical connections, relays, terminal connections etc all as specified and directed by Engr-in-charge including one coat of synthetic enamel spray paint colour as approved by EIC, after cleaning dust dirt, oil and grease etc (Painting shall be carried out at site) including cost of all spare parts required | 1 | Each Job | |
| 43 | 43 | M&L in replacment of DSR digital regulator, for 30 KVA DG Set in the panel including connecting its electrical connections to relays, contactor 3P, CT 100/5, MCCB, bus bar, selector switch and phase indication neon lamp, all parts should be cleaning and removing the carbon, tighting the bolts and nuts for all parts including lugs and auxiliary electric connection, replace the rusted/damaged bolts, nuts, washers, phase separtor and lugs incl disconnection the electric supply and making connections including cost of all spare parts required all as specified and directed by Engr-in-Charge | 2 | Each Job | |
| 44 | 44 | S&F in repair brass battery terminal heavy duty complete suitable for 12 volts Battery. | 4 | Set of two | |
| 45 | 45 | S&F PVC insulated multistranded copper wire lead for connecting battery of size 25 Sqmm complete all as directed | 12 | RM | |
| 46 | 46 | Supply & pouring of distilled water in batteries duly, mixed with required quantity of acid complete all as specified and as directed. | 15 | Ltr | |
| 47 | 47 | M&L for preparing old metal/wooden surface by cleaning, removing old paint by paint remover/scrappers for any width or girth and applying two coats of synthetic enamel paint by spray painting (second coat shall be applied at the interval of one day) of colour complete all as directed and specified by EIC for the following items :- \n(i) 150 mm CI/GI Pipe line - 20.00 RM\n(ii) Gate valves and gate valve chamber (metal) doors - 14.00 Nos.\n(iii) Shutters for sub stations and pump houses - 6.00 Nos.\n(iv) Vertical Turbine Pumps (external body) - 2.00 Nos.\n(v) Doors incluindg glazed door frames - 16.00 Nos.\n(vi) Windows - 28.00 Nos | 6 | Each Plant | |
| 48 | 48 | M&L for preparing old metal surface by cleaning, removing old paint by paint remover/scrappers for any width or girth and applying two coats of synthetic enamel paint by spray painting (second coat shall be applied at the interval of one day) of colour as directed by EIC etc. complete all as specified for DG Set 20 KVA Capacity | 1 | Each Job | |
| 49 | 49 | S&F18/20 watt as in replacement of LED tube light 4' long on existing tube light fittings including necessary fixing and connecting arrangements complete all as specified and directed. | 30 | Each | |
| 50 | 50 | M&Lfor MCB single pole 6 to 32 Amp 240 volts B curve 10 KA, IP 20 transparent label holder fully insulated safety shutters suitable for cable upto 35 Sqmm cross sectional area complete including suitable size copper lugs complete all as specified and directed. | 36 | Each | |
| 51 | 51 | S&F Miniature circuit breakers ISI marked 240 Volt, 50 Hz, double pole 40 Amps, breaking capacity 10 KA complete all as specified and directed. | 18 | Each | |
| 52 | 52 | Disconnecting carefully old unserviceable ammeter from panel board and S&F of new 96mm size square/circular digital type ammeter of range 0-30 ampere or 0-100 Ampere, size of letters 25mm, with set of CTs of suitable rating, necessary connectiong/fixing arrangements and testing complete all as specified and directed. make AE (ISI Marked) or Equivalent | 15 | Each | |
| 53 | 53 | Disconnecting carefully old unserviceable Voltmeter from panel board an S&F of new 96 mm size square/circular digital type Voltmeter of range 0-500 Volt,size of letters 25mm, make -AE (ISI marked) or equivelent, necessary connecting/fixing arrangements and testing complete all as specified and directed | 15 | Each | |
| 54 | 54 | S&F as in replacement of LED type indicating lamps of RYB colours as directed at site on existing panel board including necessary fixing and connecting arrangements complete all as specified and directed | 6 | set of three | |
| 55 | 55 | S &F as in replacement of selector switch suitable for ammeter including all connecting/joining materials as required complete all as specified and directed | 12 | Each | |
| 56 | 56 | Supply only insulation electric tape roll 20mm 25 mtr long for tradesmen complete all as specified and directed \nNote: on receipt, the same will be taken on store in hand ledger and will be issued on baby indent. | 150 | Each | |
| 57 | 57 | M&L in repair of Air termination single poined aluminium rod 12mm dia and 300 mm long complete all as specified and as directed | 25 | Each | |
| 58 | 58 | M&L in repair of test terminal block made of gun metal or phosphorus bronze size 75mmx75mmx25mm including 03 Nos, 8 mm dia 25mm long hex. Head screw complete all as specified and as directed | 10 | Each | |
| 59 | 59 | S&F in repair of Earth continuity conductor aluminium strip 25mm x 3mm with saddles and fixing screws etc in wall all complete as specified and directed | 60 | RM | |
| 60 | 60 | M&L for earthing complete with galvanised steel earth plate electrode size 600mmx600mmx6mm thick burried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised iron strip 32x6mm earth lead by means ofbolts, nuts, check nuts and washers of galvanised steel all as shown in electric plate No. 03 of SSR Part-I connected to continuous earth electrode on main switch board all as specifed or indicated and testing on completion including provision of earth strip protection with 40 mm dia medium grade GI Pipe and watering pipe shall be 20mm bore, medium grade with funnel of suitable size including excavation and earthwork in any type of soil & disposal of soil, constr of PCC earth chamber in mix 1:3:6 type C-1 with 20mm thick RCC 1:2:4 type B-1 cover, reinforced with 8mm TMT bars 100mm C/C both ways with lift hook made out of 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed.\nNote ; The unit rate includes for protection pipe and GI strip from top of earth plate upto a length of 7.5m above ground. | 30 | Each Set | |
| 61 | 61 | S&F in repair of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required GI strip 32mmx6 mm | 60 | RM | |
| 62 | 62 | S&F in repair of pad locks mild steel with 5 levers for rolling shutter complete all as specified and directed | 5 | Each | |
| 63 | 63 | M&L 0.50mm thick pre painted galvanised corrugated steel sheets zinc coated @ 550 gms per Sqm including complete necessary arrangement for fixing of sheet, completed all as specified and directed | 50 | Sqm | |
| 64 | 64 | M&L steel work in tubular trusses including special shaped washer etc, complete using MS ERW or induction butt welded tubes confirming to IS 1161-1979 grade st-240 complete all as specified and directed. | 130 | Kg | |
| 65 | 65 | Supply and fix in replacement 12 volts 150 ampere hour Dry type battery sealed maintenance free for power pack of 11KV VCB complete all as specified and directed.\nMake : Amaron/Exide/Luminous | 1 | Each | |
| 66 | 66 | S&F in replacement of 1100 volts grade heavy duty cable PVC insulated alumium conductor multistranded served with innter sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulated hangers not more then 1 meter a part including 4 mm dia PVC seathed GI suspension wire one twin core cable flat or circular 6 Sqmm 2 core weather proof cable all as specified and directed. | 180 | RM | |
| 67 | 67 | S&F in replacement of glow sign board box type of size 100 cm x 200cm of acrylic sheet cover in sky blue colour one side display and GI Sheet for back side and made of MS angle frame not less than 40mmx40mmx6mm with 02 x 20 W LED tube light fittings complete including connecting up with twin core twisted flexible copper conductor cable with suitable size and necessary items for fixing on roof of Pump House & Power House and stnecil of word as reqd with all grouting and PCC work complete all as specified and as directed | 3 | Each Job | |
| 68 | 68 | Supply only class 2 electrical hand gloves HT 11 KV complete conforming to IS :4770/1991, all as specified and as directed | 2 | Each\nPair | |
| 69 | 69 | Supply and fix HT post polymer insulators, HT pin polymer insulators 11 KV complete all as specified and directed. | 20 | Each | |
| 70 | 70 | Supply and fix in replacement of chlorine dozing pump including repairs to its pipe connections, servicing and maintenance of chlorine dozing machine mounted on PVC Tank( multistage, 1400 RPM, 0.5 HP capacity for chloronome plant) including raking out rusted and dust material over dozing bucket, cleaning ,refixing all parts as in before and making it functional inculding cost of minor parts such as flexible wire, washers, NRVs etc complete all as specified and directed. | 3 | Each job | |
| 71 | 71 | Taking down unserviceable security light fittings and supply and fixing new generation energy saving & environment friendly, powder coated pressure die-cast aluminium IP65 roadway luminaries with LEDs with lens as light source & exclusively designed along with electronic driver type street light fitting suitable for 90 watt capacity LED lamp with and including all accessories duly pre-wired, fixing on existing bracket and taking down the unserviceable light to store at site for street light on LT pole/ wall complete including taking old street light fitting any type and description complete all as specified and directed. \nMake-C&S Orion 3.0 Series, Cat part No:LTEF90WHPLED, or equivalent in Havells, CG,Syska, Bajaj | 16 | Each | |
| 72 | 72 | Taking down unserviceable security light fittingsSupply and fixing new generation energy saving & environment friendly, powder coated pressure die-cast aluminium IP65 roadway luminaries with LEDs with lens as light source & exclusively designed along with electronic driver type street light fitting suitable for 60 watt capacity LED lamp with and including all accessories duly pre-wired, fixing on existing bracket and taking down the unserviceable light to store at site for street light on LT pole/ wall complete including taking old street light fitting any type and description complete all as specified and directed. \nMake- C&S cat part No LTESS60WLED/LS, Havells, CG. | 24 | Each | |
| 73 | 73 | Taking down unserviceable security light fittingsSupply and fixing new generation energy saving & environment friendly, powder coated pressure die-cast aluminium IP65 roadway luminaries with LEDs with lens as light source & exclusively designed along with electronic driver type street light fitting suitable for 45 watt capacity LED lamp with and including all accessories duly pre-wired, fixing on existing bracket and taking down the unserviceable light to store at site for street light on LT pole/ wall complete including taking old street light fitting any type and description complete all as specified and directed. \nMake- C&S cat part No LTESS45WLED/LS, Syska, Bajaj. | 40 | Each | |
| 74 | 74 | Taking down unserviceable security light fittingsSupply and fixing new generation energy saving & environment friendly, powder coated pressure die-cast aluminium IP65 roadway luminaries with LEDs with lens as light source & exclusively designed along with electronic driver type street light fitting suitable for 30 watt capacity LED lamp with and including all accessories duly pre-wired, fixing on existing bracket and taking down the unserviceable light to store at site for street light on LT pole/ wall complete including taking old street light fitting any type and description complete all as specified and directed. \nMake- C&S LUMIFLO cat part No LTESSR30WLED/LS, Syska, Bajaj or equivalent | 30 | Each | |
| 75 | 75 | S&F in replacement of switch disconnector 250 Amp, four pole, 415 Volts, complete all as specified and directed.\nMake : Havells cat part No. IHCSFO0250 HSN Code:8536 or equivalent | 2 | Each | |
| 76 | 76 | Supply and fix in replacement of GI tubing medium grade 40 mm dia ring with cap of HT pole including welding of flat iron 40mm x 5mm thick -04Nos including holes for suitable fixing of flood lights and painted with one coat of red oxide primer and two coats of synthetic enamel paint with clamps, bolts, nuts and whashers for fixing on poles, complete all as specified and directed. | 14 | Each job | |
| 77 | 77 | Supply installation commisioning and testing LT Panel outdoor type feeder pillar box including suitable capacity of aluminium bus bar 440/415 Volts AC, 3 phase 4 wire 50 cycles total enclosed weather poor dust and vermin proof MS sheet iron clad of 3.15 mm thick powder coated complete comprising of the following (foaling line and Trg ground).\nINCOMINGS:-\n(a) MCCB 4 POLE 415 V 250 A (25 KA) -01 No (adjustable type)\nOUTGOINGS:-\n(a) MCCB 4 POLE 415 V 63 A (25 KA) -04 No (adjustable )\n(b) MCCB 4 POLE 415 V 63 A (25 KA) -01 No (spare)\n(c) Digital type Ammeter including CTs and selector switch - 1 Nos \n(d) Digital type Voltmeter and selector switches 0 -500 - 1 No \n(e) Indicator lamp RYB - 1 Set \n(f) Copper bus bar 600 Amps rating 3 Nos for phases and one No for neutral of half capacity - 01 Set | 2 | EACH JOB | |
| 78 | 78 | Supply installation commissioning and testing LT Panel outdoor type ( Feeder piller box) 440/475 volts AC, 3 phase 4 wire 50 cycles total enclosed,Weather proof dust and vermin proof MS sheet iron clad of 3.15 mm thick power coated complete comprising of the following. \n(for offr mess sub stn)\nINCOMINGS:-\n(a) MCCB 4 POLE 415 V 400 A (36 KA) -01 No (adjustable type)\nOUTGOINGS:-\n(a) MCCB 4 POLE 415 V 250 A (25 KA) -03 (adjustable type)\n(b) MCCB 4 POLE 415 V 63 A (25 KA) -01 No \n(c) Digital type Ammeter including CTs and selector switch - 1 Nos \n(d) Digital type Voltmeter and selector switches 0 - 500 - 1 No \n(e) Indicator lamp RYB - 1 Set \n(f) Copper bus bar 600 Amps rating 3 Nos for phases and one No for neutral of half capacity - 01 Set\n | 1 | EACH JOB | |
| 79 | 79 | Supply and erect in true vertical (or to be planted as strut) steel tubular, swaged welded pole complete with MS base plate of 6 mm thick of size 300 x 300 mm finial taper plug, cap, bolts, nuts, washer and screws confirming to IS -2713 Part II type 410-SP-55 (11 mtr long) hole of required size and Nos for fixing cross arms painting with one coat of red oxide zinc chrome primer and two coats of silver aluminium paint for exposed surface and two coats of black bituminous paint for portion embedded in concrete including taking down existing pole from its position complete all as specified and directed.\nNote : (i) Excavation earth work, PCC foundation, coping shall be measured and paid separately\n(ii) Poles removed from site will be handed over to the MES store). | 12 | Each | |
| 80 | 80 | Supply and erection of steel tubular swaged poles complete with MS base plate of 6mm thick of size 300mmx300mm, finial taper plug, bolts , nuts and screw as specified of type 410 SP-31, 9 Meter long, including marking alternate yellow and black strips 30 cm height- total - 05 Nos with two coats of aluminium paint over a coat of red oxide zinc chrome primer above embedded portion at GL and two coats of black bituminous paint for portion of embedded in PCC including taking down existing pole from its position, complete all as specified and directed.\nNote. (i) Earth work and PCC for foundation channels, clamps, nuts and bolts to be measured and paid for separately.\n(ii) Poles removed from site will be handed over to the MES store). | 24 | Each | |
| 81 | 81 | M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundation of pole/stay assembly etc including necessary form work, complete all as specified and directed. | 18.36 | Cum | |
| 82 | 82 | M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) for coping around poles, including necessary form work finishing even and smooth without using extra cement, and painting with three coats of white washcomplete all as specified and directed. | 3.42 | Cum | |
| 83 | 83 | M&L for plain cement concrete 1:4:8 concrete type D-2 (using 40mm graded stone aggregate) in foundation filling and mass concrete,for bedding of pole, complete all as specified and directed. | 1.94 | Cum | |
| 84 | 84 | M & L in replacement DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof for outdoor installation including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 Sqmm 2/4 core and fixed to the PSC/Steel Poles by means of suitable size of clamps with nut ,bolts and including provn for fixing 01 no of single pole MCBs 6-32 amps,10KA and MCB TPN 6-32 amps, 10 KA, ‘B’ series = 01 No inside the box complete all as specified and directed. \nMake :- Sintex/Hensel/standard or equivalent. | 80 | Each | |
| 85 | 85 | S&L XLPE insulated armoured heavy duty electric cable with stranded aluminum conductor 1100 volt grade cross sectional area 10 Sqmm and 2 core all as specified and directed. | 810 | RM | |
| 86 | 86 | S&F XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm 3.5 core complete all as specified and directed. | 730 | RM | |
| 87 | 87 | Supply & fix in replacement of bib taps cast iron 15 mm dia, screwed for iron pipe and fixed all as specified and directed | 60 | Each | |
| 88 | 88 | Supply & fix in replacement of bib taps cast iron 20 mm dia, screwed for iron pipe and fixed all as specified and directed | 30 | Each | |
| 89 | 89 | S & F stop valves, brass chromium plated, cast copper alloy, 15mm bore dia screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. | 15 | Each | |
| 90 | 90 | S & F stop valves, brass chromium plated, cast copper alloy, 20 mm bore dia screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed | 15 | Each | |
| 91 | 91 | Taking out old unserviceable Sluice valve & Supply and fix cast iron flanged sluice valve of class 1.6 PN installed complete with ISI marked (IS-14846) with gun metal spindle and hand wheel all as specified and directed by EIC of following size at PH No. 1, 2 3 & 4. \n(Make Kirloskar/Upadhyay/Ramco) | |||
| 92 | 92 | 80 mm dia | 1 | Each | |
| 93 | 93 | 100 mm dia | 1 | Each | |
| 94 | 94 | 150 mm dia | 1 | Each | |
| 95 | 95 | Taking out, sluice valve top cover, spindle and broken / unsv check nut (gutka) carry to workshop & re-fixing of sluice valve after servicing / maintenance /grinding / cleaning / threading / greasing work to sluice valve parts, including replacement of gland packing, rubber sheet, nut, bolt, Spindle ,check nut and washer of existing size complete all as specified and directed, of following size:- | |||
| 96 | 96 | 80 mm bore | 1 | Each Job | |
| 97 | 97 | 100 mm bore | 1 | Each Job | |
| 98 | 98 | 150mm bore | 1 | Each Job | |
| 99 | 99 | M&L for laying GI tubing light grade 40 mm dia in trenches/walls/poles with all fittings for cable protection including GI clamps nut bolts and washer etc all as specified. | 102 | RM | |
| 100 | 100 | Excavation over in trenches in soft/loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface all as specified and directed at site. | 203.51 | Cum | |
| 101 | 101 | Removal of excavated materials n.exec 50 mtr and depositing where directed at level n.exec 1.5 mtr above the starting point | 99.28 | Cum | |
| 102 | 102 | Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site | 91.27 | Cum | |
| 103 | 103 | Supply and spread unwashed dry river sand for sand cushioning and covering the UG Cable in trenches (Note : Punning thickness shall be measured) | 76.22 | Cum | |
| 104 | 104 | Supply and laying burnt bricks sub class 'B' old size for cable protection laid length wise perpendicular to the axis of cable complete all as specified. | 14.52 | Per 1000 Nos | |
| 105 | 105 | Supply and fixing MCCB 400 Amp 4 pole 36 KA with thermal magnetic release setting with 100% ICU complete all as specified and directed. Make;- Legrand catpart No 4202 07/ Siemens/ Schneider or equivalent | 3 | Each | |
| 106 | 106 | M&L for stringing in replacement of steel wire 4 mm dia 8 SWG as continuous earth wire and grading incl cradal hexagonal binding properly with channel/Angles etc complete all as specified | 2.5 | Qtl | |
| 107 | 107 | S&F Anticlimbing devices. Comprising of 2.24mm dia galvanised steel 2 stranded barbed wire with 2.0 mm dia barbs wrapped spirally round poles to a length of 0.5 to 1.0 mtr clamped and properly screwed all as directed by Engr-in-Charge | 0.5 | Qtl | |
| 108 | 108 | S&F Electric shock treatment chart as per sample of size 750x480mm | 15 | Each | |
| 109 | 109 | S&F 1.60mm thick mild steel, plain, black sheet in Steel over head tank wall cladding, bases of water tank and similar work, cut to size and sheeting is welded to frame/Existing sheet of Existing tank without dismentling of old sheet complete all as specified and directed. | 76 | Sqm | |
| 110 | 110 | Supply only fine aggregate (sand) complete all as specified and directed. | 2.5 | Cum | |
| 111 | 111 | Supply and labour for spreading stone aggregate of size 40mm at 11 KV sub station/Transformer/panel board/two pole/four pole structure area, complete all as specified and directed. | 19.5 | Cum | |
| 112 | 112 | S&F in replacement of Gate lights/post top light with 15 Watt LED light as light source, IP-65, made of spun aluminium landscape luminaire suitable for fixing on 40/50 mm GI pipe on the gate post including connection with all necessary accesssories complete all as specified and directed by Engr-In-Charge. Make : Havells Coral (Opal) Cat part No.CORALMINIPT15WLED757PSYMTOPC or equivalent in Phillips/cropmpton/C&S/Bajaj | 6 | Each | |
| 113 | 113 | Labour only for stringing, tightening, fixing and connecting ACSR conductor and GI Wire of existing HT/LT overhead line any size any type, between pole to pole, approximate span length 40 to 50m, complete the following all as specified and directed : - | |||
| 114 | 114 | 2 Wire with/GI Wire. | 20 | Each Span | |
| 115 | 115 | 5 Wire With GI Wire. | 40 | Each Span | |
| 116 | 116 | 6 Wire With GI Wire. | 20 | Each Span | |
| 117 | 117 | M & L for prunning of tree branches of any sizes and dia, not less than 2 Mtr around the LT /HT OH line which obstructing the power supply/ maintenance of electric supply as well as illumination in area including repair of damage broken ACSR conductor, GI wire and jumpers and disposed exc 50 mtr away clearing area and testing of line, complete all as specified and directed.\nNote : (i) Span length is aproximate 40 to 50m.\n(ii) Rate quoted are inclusive of repair to damage work in item. | 40 | Each Span | |
| 118 | 118 | M&L for Painting single pole or struct of LT PCC poles/structure including. cleaning and scrapping the old surface and then two coat of synthetic paint yellow & Black strips 300mm wide alternative from bottom to upward of LT pole upto height of 1.5mtr above embedded portion at GL, and writing pole number, complete the following as specified and directed by EIC. | 15 | Each Job | |
| 119 | 119 | M&L for Painting of single LT steel tubular, structure including. cleaning and scrapping the old surface and then applying two coat of aluminium paint over a coat of red oxide primer on all steel structure mounted on pole viz. Cross Arms , Clamps, bolts, nuts, brackets etc. and including painting of pole/ structure ith two coat of synthetic black & yellow enamel paint strip 300 mm wide alternative from bottom to upward of LT pole up to height of 1.5 mtr above the embedded portion of GL and writing pole number balance portion of pole shall be painted with two coats of Aluminium enamel paint over a coat of red oxide primer, complete the following as specified and directed :-\nNotes for Item No 124.00 to 125.00 : - \n(i) Pole will be cleaned with steel brush to remove old unserviceable paint or scrapped complete surface.\n(ii) All poles will be numbered all as directed at site.\n(iii) If painting of poles is not done properly to the entire satisfaction of Engr-in-Charge, the contractor will be liable to repaint the same with out any extra cost. | 50 | Each | |
| 120 | 120 | Supplying, Laying, Jointing, testing and commissioning cable XLPE insulated armoured LT 1100 Volts grade heavy duty with Stranded aluminum conductor through pipes in ducts, poles/ trenches including fixing of copper lugs, making good to disturbed surface etc for the following cross sectional area, complete the following as specified and directed.\nNote : Excavation and earth work to be measured and paid separately. | |||
| 121 | 121 | 35 Sqmm 3.5 core | 100 | RM | |
| 122 | 122 | 95 Sqmm 3.5 core | 100 | RM | |
| 123 | 123 | S&F GI tubing 50mm bore light grade includinng taking down from the existing site for cable protection fixed on pole/laid under floor / road/wall etc with fittings including necessary flat iron clamps of size 40 x5 mm etc complete all as specified and directed. | 20 | RM | |
| 124 | 124 | M&L for replacement of unserviceable/ damaged PVC jumper for HT/LT of any size and length to transformer or pole for making connection, complete all as specified and directed. | 30 | Each Job | |
| 125 | 125 | M&L cutting PCC/floor/road and taking out cable and making good with PCC including material as per existing after laying of pipe for cable protection complete all as specified and directed at site complete all as specified and directed. | 10 | RM | |
| 126 | 126 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm GI suspension wire, 10 x 2 core cable flat or circular complete all as specified and directed. | 180 | RM | |
| 127 | 127 | Taking down MCCB of any capacity and size, complete all as specified and directed. | 10 | Each | |
| 128 | 128 | Supply and fixing MCCB 250 Amp 4 pole 25 KA with thermal magnetic release setting with 100% ICU complete all as specified and directed. Make;- Legrand cat part No 4202 19/ Siemens/ Schneider or equivalent | 3 | Each | |
| 129 | 129 | Supply and fixing MCCB 200 Amp 4pole 25 KA with thermal magnetic release setting with 100% ICU complete all as specified and directed. Make;- Legrand cat part No 4202 08/ Siemens/ Schneider or equivalent | 2 | Each | |
| 130 | 130 | Supply and fixing MCCB 160 Amp 4 pole 16 KA with thermal magnetic release setting with 100% ICU complete all as specified and directed. Make;- Legrand cat part No 4200 17/ Siemens/ Schneider or equivalent | 1 | Each | |
| 131 | 131 | Supply and fixing MCCB 100 Amp 4 pole 16 KA with thermal magnetic release setting with 100% ICU complete all as specified and directed. Make;- Legrand cat part No 4200 15/ Siemens/ Schneider or equivalent | 1 | Each | |
| 132 | 132 | Supply and fixing MCCB 63 Amp 4 pole 16 KA with thermal magnetic release setting with 100% ICU complete all as specified and directed. Make;- Legrand cat part No 4200 13/ Siemens/ Schneider or equivalent | 1 | Each | |
| 133 | 133 | Supply and fixing set of incoming or outgoing spreaders 4P complete all as specified and directed. Make;- Legrand cat part No 4200 13/ Siemens/ Schneider or equivalent | 2 | Set | |
| 134 | 134 | M&L for repairing LT feeder box/ panel and their doors, inner compartments etc by denting/ welding where required and cleaning, removing old paint by paint remover/scrappers for any number of coats, any width or girth and applying two coats of synthetic enamel paint by spray painting, inside and outside of panels (second coat shall be applied at the interval of one day) of the approved colour, complete all as specified and directed. | 8 | Each Job | |
| 135 | 135 | M&L for danger notice plate of 1.6mm thick mild steel sheet, vitreous enameled white with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. Clamp 25X3mm, suitable for PCC/Steel tubular pole, bolts and nuts of approved size for LT 20x15 cm size complete. | 40 | Each | |
| 136 | 136 | Supply & fix in repair street light panel, single phase, with 6 KW maximum load, astronomical type, 32 Amp TP contractor, 40 Amp SPN. Make: Havells, SAP Code : IHXSS0106A, HSN Code 8537 or equivelent | 1 | Each | |
| 137 | 137 | Supply and fixing new generation energy saving & environment friendly long life versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver type street light fitting 45 watt capacity LED and including all accessories duly pre-wired, fixing on existing bracket with nut, bolts & washers as required at site for fixing of street light on LT pole/ wall complete including taking old street light fitting any type and description complete all as specified and directed. Make:- Cat Part No LTESS45WLED/LS of C&S or equivalent in Havells/Bajaj/Syska | 8 | Each | |
| 138 | 138 | Supply and fixing new generation energy saving & environment friendly long life versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver type street light fitting 25 watt capacity LED and including all accessories duly pre-wired, fixing on existing bracket with nut, bolts & washers as required at site for fixing of street light on LT pole/ wall complete including taking old street light fitting any type and description complete all as specified and directed. Make:- Cat Part No LTESS25WLED/LS of C&S or equivalent in Havells/Bajaj/Syska | 12 | Each | |
| 139 | 139 | Supply and fixing in repair for swich disconnector fuse unit in sheet steel enclosure TPN current rating 160 Amp with HRC Fuse including disconnecting and taking out U/S Main switch complete all as specified and directed. | 1 | Each | |
| 140 | 140 | Supply and fixing in repair for swich disconnector fuse unit in sheet steel enclosure TPN current rating 100 Amp with HRC Fuse including disconnecting and taking out U/S Main switch complete all as specified and directed. | 1 | Each | |
| 141 | 141 | M&L in replacment of pin insulator porcelain type vitreous white brown including one galvanized mild steel spindle two galvanize iron washers and one galvanized iron nut 100 mm height, 65mm dia for 1100 V grade, complete all as specified and directed. | 60 | Each | |
| 142 | 142 | M&L in replacment of shackle type porcelain vitreous white, brown including one galvanized mild steel straps, washers, bolts and nuts 100 mm height, 115 mm dia, section of strap 31 x 5 mm for 1100 V grade, complete all as specified and directed. | 40 | Each | |
| 143 | 143 | M&L in repair for LT line PVC Spacers spiral type for the following :- | |||
| 144 | 144 | Spacer for two wire | 40 | Each | |
| 145 | 145 | Spacer for three wire | 50 | Each | |
| 146 | 146 | Spacer for four wire | 50 | Each | |
| 147 | 147 | Dismentling of ACSR conductor, service feeder or distribution spans complete all as directed. | 3 | Per Qtl | |
| 148 | 148 | Supplying, Stringing, Tightening, Fixing & connecting ACSR conductor of any size for over Head LT Line including aluminium binding wire or aluminium tape of suitable type clamps/connector or other jointing material complete all as specified and directed by EIC. | 3 | QTL | |
| 149 | 149 | M & L for galvanised steel wire 4 mm dia to be stringed as continuous earthing wire on over head LT lines complete all as directed incl taking down the old rusted earth wire. | 1.5 | Qtl | |
| 150 | 150 | Dismantling cross-arms of M.S. channel or angle sections etc. complete all as specified. | 3 | Qtl | |
| 151 | 151 | M&L for cross arms, bracing supports clamps and back plate fabricated from structural steel section including bolts, nuts, washers and welding, bending, cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint all as specified and directed by EIC. | 3 | Qtl | |
| 152 | 152 | Supply and fixing in repairs stay assembly for LT Pole comprising of 7/3.15mm galvanized steel stranded stay wire of required length fixed to pole with and including clamps fabricated out of MS Clamps 50 x 6 mm flat iron including nuts, bolts and washers, MS galvanized stay bow 14mm dia 400mm long galvanized steel stay rod 16mm dia, 1800mm long with ratchet type nuts & bolts and stay plate, galvanized thimble 02 Nos, loop insulators 65mm x90mm clearance dia of hole 16mm all as specified and shown in electrical plate No. 1 of MES SSR including all necessary excavation and earth work, PCC (1:3:6) type C-2 using 40mm graded stone aggregate ,embedded block and disposal of surplus soil to a distance not exceeding 50mtr complete all as specified and directed by EIC. | 6 | Each Set | |
| 153 | 153 | Repairs to existing stay assembly including tightening of stay wire, , shifting of clamps fixed to pole or by repairing to PCC coping by breaking and making new with PCC 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and directed at site . | 4 | Each Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
