Improvement Of Water Supply And Source Development At Attabira Nac Including Construction Of Production Well And Its Ancillary Works .
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Mar 2021
0 days left
EMD
17670
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Rate Contract
Location / State
Attabira → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement Of Water Supply And Source Development At Attabira Nac Including Construction Of Production Well And Its Ancillary Works .
BOQ
| Name of Work: Improvement of water supply and source development at Attabira NAC including constrcution of Production Well and its Anciliery works. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supplying all Labour ,T&P for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well).For 6nos | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.1 | Labour for drilling of 200mm dia bore | BI01010001010000000000000515BI0100001114 | 900 | mtr |
| 3 | 1.2 | Supplying all materials, labour, T&P and Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above.(for lowering of 200 mm dia PVC/GI Casing Pipes) | BI01010001010000000000000515BI0100001115 | 180 | mtr |
| 4 | 1.3 | Supplying all labour, T&P and Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001116 | 6 | nos |
| 5 | 2 | Supplying , installation,testing of 1.00 HP single phase vertical sumbersible pump set with control panel | BI01010001010000000000000515BI0100001117 | 6 | set |
| 6 | 3 | Supplying & fixing of 2.25 Sqmm x 3 core flat for motor cable make Finolax jointing from motor to pannel including cost of all material,conveyance & labour cess etc all complete.(6set) | BI01010001010000000000000515BI0100001118 | 180 | mtr |
| 7 | 4 | Supplying all materials,labour,T&P and lowering of 40mm dia HDPE pipe with supply of long S/S nipple both site(10kg/cm²) in to the bore well & labour cess etc all complete as per the direction fo Engineer-in-charge.(40mm(11/4'') HDPE(PE-63) (10 kgf/cm²) | BI01010001010000000000000515BI0100001119 | 180 | mtr |
| 8 | 5 | Supplying all materials, labour,T&P and fitting,fixing of MS 1.21m x 0.76m size all weather terminal box with 1.37m long -4nos leg of equal section 40mm x 40mm size angle with necessary C.C. work at the leg with locking arrangement and hole for cable including labour cess etc all complete as per the direction of Engineer-in-charge. | 6 | nos | |
| 9 | 6 | Supplying & fixing & testing of Automatic Power Timer of 10 KVR floor mounting type with panel board for power correction,three phase 440 volt,50 Hz rating 10 KVR in power factor,relay, contractor and incoming swutch,fuse unit, cable with other accessories as per requirement,the body of panel made by 16 SWG CR sheet with 2 coats of red oxide,acid wash and 1 coats light gray epoxy paint including labour cess etc complete as per the direction fo Engineer-in-charge. | 6 | nos | |
| 10 | 7 | Main Switch (3 Phase) with MS frame & nut bolt etc. all complete | 6 | nos | |
| 11 | 8 | Supplying all materials, labour,T&P and providing ,fixing & fixing of following sizes W/S fittings including labour cess etc all complete as per the direction of Engineer-in-charge. | |||
| 12 | 8.1 | 32mm dia G.I. Tata Medium pipe | 15 | mtr | |
| 13 | 8.2 | 32mm dia G.I. Bend(Heavy Duty)(prov) | 12 | nos | |
| 14 | 8.3 | 32mm dia G.I.Union(Heavy Duty)(prov) | 6 | nos | |
| 15 | 8.4 | Pipe clamp for 65/32mm dia pipe (prov) | 12 | set | |
| 16 | 8.5 | 200mm size Bore cape (prov) | 6 | nos | |
| 17 | 8.6 | 32mm/65mm dia Steel Nipple With Steel Nut & bolt(Heavy Duty) (prov) | 6 | nos | |
| 18 | 8.7 | 32mm dia G.I. Flange(Heavy Duty)(prov) | 12 | nos | |
| 19 | 8.8 | 32mm dia G.M. Full way valve (Heavy Duty) | 12 | nos | |
| 20 | 9 | Providing 6mm² wire rope for lowering with pump & motor including labour cess etc all complete as per the direction of Engineer-in-charge. | 180 | mtr | |
| 21 | 10.1 | Provision for renovation of 5nos existing production wells by replacing old pump motors with starters including cables and others accessories etc all complete for uninterrupted water supply to the zones as per the direction of Engineer-in-charge. | |||
| 22 | 10.11 | Supplying,installation,testing,commissioning of Pump Motor of required head & discharge of reputed make having | 33 | HP | |
| 23 | 10.12 | Supplying & fitting,fixing of Star Delta Control Pannel with APFC arrangement for 5nos motor | 33 | HP | |
| 24 | 10.13 | Supplying & fixing of following size flat cable for motor of reputed make etc | |||
| 25 | 10.14 | 2.5 Sqmm x 3.5 core flat cable | 40 | mtr |
AI Tender Summary
Tender Timeline
Feb 13, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 01, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 02, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender