| 1 | 1 | Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. | | 350.24 | Cubic metre |
|---|
| 2 | 2 | Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification. | | 113.1 | Cubic metre |
|---|
| 3 | 3 | Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification | | 31.39 | Cubic metre |
|---|
| 4 | 4 | Supplying and filling in foundation, basement, etc with filling M-sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. | | 40.6 | Cubic metre |
|---|
| 5 | 5 | Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification. | | 50.1 | Cubic metre |
|---|
| 6 | 6 | Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification | | 90 | Cubic metre |
|---|
| 7 | 7 | Brick work in following Cement Mortar 1 : 6 (one cement and six M-sand) using best quality Fly ash bricks of size 23x11x7cm for the following including curing etc.,complete complying with standard specifications. | | 1 | Cubic metre |
|---|
| 8 | 7.01 | For foundation and basement | | 30.8 | Cubic metre |
|---|
| 9 | 7.02 | For superstructure in Ground floor | | 69.3 | Cubic metre |
|---|
| 10 | 7.03 | For superstructure in First floor | | 32 | Cubic metre |
|---|
| 11 | 8 | Brick work in cement mortar 1:6 (one cement and six M-sand) using Fly ash bricks of size of 230x110x75mm including curing etc., complete complying with standard specifications. For foundation and basement | | 26.5 | Cubic metre |
|---|
| 12 | 9 | Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used, finishing and curing etc. complete complying with standard specification. (At Plinth Level) | | 38 | Square Metre |
|---|
| 13 | 10 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) | | 197.4 | Square Metre |
|---|
| 14 | 11 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) | | 1 | Cubic metre |
|---|
| 15 | 11.01 | For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc. | | 695.73 | Square Metre |
|---|
| 16 | 11.02 | For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. | | 337.2 | Square Metre |
|---|
| 17 | 12 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) | | 181 | Quintal |
|---|
| 18 | 13 | Providing and laying in position, standardised concrete Mix M-25 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). | | 1 | Cubic metre |
|---|
| 19 | 13.01 | For foundation and Basement | | 52.7 | Cubic metre |
|---|
| 20 | 13.02 | For Superstructure in G.F. | | 72.03 | Cubic metre |
|---|
| 21 | 13.03 | For Superstructure in FF. | | 28.5 | Cubic metre |
|---|
| 22 | 14 | Brick partition walls of 11.50cm thickness using best quality Fly Ash Bricks of size 23 x 11 x 7 cm in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) | | 1 | Cubic metre |
|---|
| 23 | 14.01 | For Superstructure in G.F. | | 94.1 | Square Metre |
|---|
| 24 | 14.02 | For Superstructure in F.F. | | 51 | Square Metre |
|---|
| 25 | 15 | Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 10-12mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. | | 15 | Cubic metre |
|---|
| 26 | 16 | Cement Concrete 1:5:10 (One cement, Five sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers | | 26.2 | Cubic metre |
|---|
| 27 | 17 | Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. | | 1 | Cubic metre |
|---|
| 28 | 18 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \"U\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. 110mm dia PVC Pipe | | 42 | Running Metre |
|---|
| 29 | 19 | Supplying and fixing Stainless steel door frames (For Single / Double Leaf) using Stainless steel frame of size 105 x 60mm, using Mild Steel sheets 1.00mm thick (18 guage) specia; profile extruded section. The Stainless steel frame should be as per IS 4351 / 1976. The rate is inclusive of bottom tie, hold fast and provision to fix aldrop, tower bolt, hinges and lock plate etc., . complete complying with standard specification as directed by the Departmental Officers. | | 12 | Running Metre |
|---|
| 30 | 20 | Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround commercial ply 35mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos. 150x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers. Double Leaf | | 7.56 | Square Metre |
|---|
| 31 | 21 | Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. Solid panel PVC door with frame. | | 24.26 | Square Metre |
|---|
| 32 | 22 | Supplying and fixing MS grills for Doors and Windows and Ventilators of approved design and as directed by the departmental officers including cost of MS grill, labour charges and cost of one coat of red oxide primer with labour charges for priming coat etc., complete complying with standard specificaitions. | | 1622 | KG |
|---|
| 33 | 23 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete | | 16.52 | Square Metre |
|---|
| 34 | 24 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers | | 801.3 | Square Metre |
|---|
| 35 | 25 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. | | 1439.11 | Square Metre |
|---|
| 36 | 26 | Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers. | | 112.5 | Square Metre |
|---|
| 37 | 27 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work). | | 1432.8 | Square Metre |
|---|
| 38 | 28 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface etc., complete complying with standard specification. | | 652.3 | Square Metre |
|---|
| 39 | 29 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) | | 52 | Square Metre |
|---|
| 40 | 30 | Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) | | 18.5 | Square Metre |
|---|
| 41 | 31 | Supplying, laying and jointing G.I. Pipes of approved quality and best variety of \"B\" class pipe of the following dia including labour fixing G.I. Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., making holes on the walls (or) drilling holes in roof and making good the G.I. pipes shall be got approved by the Executive Engineer before use on works. \nAbove ground level. | | 1 | Cubic metre |
|---|
| 42 | 31.01 | 25mm dia GI pipe (External) | | 100 | Running Metre |
|---|
| 43 | 31.02 | 32mm dia GI pipe (External) | | 156.5 | Running Metre |
|---|
| 44 | 32 | Supplying and fixing in position GI unions of heavy duty of approved quality and good variety of various sizes inluding necessary cutting and threading of GI pipes for jointing the union and providing two coats of painting with good variety and approved quality of synthetic enamel paint over one coat of primer in case of pipe line above ground level / one coat of tar in case of below ground level for both internal and external water supply arrangements, etc., complete complying with standard specifications. (The GI unions should be got approved by Executive Engineer before use on works). | | 1 | Cubic metre |
|---|
| 45 | 32.01 | 25mm Dia G.I. Union | | 8 | Numbers |
|---|
| 46 | 32.02 | 32mm Dia G.I. Union | | 9 | Numbers |
|---|
| 47 | 32.03 | 25mm dia GI Elbow. | | 6 | Numbers |
|---|
| 48 | 32.04 | 32mm dia GI Elbow. | | 12 | Numbers |
|---|
| 49 | 32.05 | 25mm dia GI Bend | | 5 | Numbers |
|---|
| 50 | 32.06 | 32mm dia GI Bend | | 14 | Numbers |
|---|
| 51 | 32.07 | 25mm dia GI Tee | | 7 | Numbers |
|---|
| 52 | 32.08 | 32mm dia GI Tee | | 13 | Numbers |
|---|
| 53 | 32.09 | 32x25 GI Reducer Tee | | 9 | Numbers |
|---|
| 54 | 33 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. | | 1 | Cubic metre |
|---|
| 55 | 33.01 | 25mm.dia G.M Gate valve | | 4 | Numbers |
|---|
| 56 | 33.02 | 32mm.dia G.M Gate valve | | 4 | Numbers |
|---|
| 57 | 34 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). | | 5 | Numbers |
|---|
| 58 | 35 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) | | 18 | Numbers |
|---|
| 59 | 36 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \"P\" or \"S\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... | | 3 | Numbers |
|---|
| 60 | 37 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \"P\" or \"S\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). | | 8 | Numbers |
|---|
| 61 | 38 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) | | 4 | Numbers |
|---|
| 62 | 39 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). | | 4 | Numbers |
|---|
| 63 | 40 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). | | 4 | Numbers |
|---|
| 64 | 41 | Supplying, laying and jointing glazed stone ware pipes of the following dia of approved quality with spigot and socket ends and fixing them in dry condition using spun yarn and cement including petty masonry shoring and strutting wherever found necessary and laying the pipe line in the alignment at the specified gradient and testing with necessary tools and plants, etc., and re-filling the trench with excavated earth and levelling the ground etc., complete complying with standard specifications. (Earth work excavation, re-filling with excavated earth will be measured and paid separately). | | 10 | Running Metre |
|---|
| 65 | 42 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level | | 1 | Cubic metre |
|---|
| 66 | 42.01 | 75 mm Dia PVC Pipe. | | 51 | Running Metre |
|---|
| 67 | 42.02 | 110 mm Dia PVC Pipe. | | 50 | Running Metre |
|---|
| 68 | 43 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). | | 1 | Cubic metre |
|---|
| 69 | 43.01 | 110 mm dia PVC plain bend | | 12 | Numbers |
|---|
| 70 | 43.02 | 110 mm dia PVC Door Tee | | 6 | Numbers |
|---|
| 71 | 43.03 | 75 mm diaPVC plain bend | | 11 | Numbers |
|---|
| 72 | 43.04 | 75 mm dia PVC Door Tee | | 9 | Numbers |
|---|
| 73 | 44 | Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification. | | 3 | Cubic metre |
|---|
| 74 | 45 | Supplying and filling 20mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification. | | 3 | Cubic metre |
|---|
| 75 | 46 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) | | 16 | Numbers |
|---|
| 76 | 47 | Supplying and fixing in position best quality approved make white glazed earthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works] | | 4 | Numbers |
|---|
| 77 | 48 | Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers | | 1 | Numbers |
|---|
| 78 | 49 | Supplying and erecting 1H.P monoblock with ISI mark with necessary accessories (motor should be got approved by Executive Engineer before use on works) complete complying with standard specification. | | 1 | Numbers |
|---|
| 79 | 50 | Drilling of 6\"dia (150mm) vertical bores in hard rock areas to any required depth as directed by the departmental officers.The rate is inclusive of assembling the equipment in the point as selected, drilling bore,labour charges for inserting the casing pipe if necessary and also transportation charges of the rig and supporting vehicle to the bore point etc.,complete complying with standard specification. | | 150 | Running Metre |
|---|
| 80 | 51 | Supplying suitable PVC FINOLEX (OR) EQUIVALANT \nborewell (6kg/cm2) best approved quality with ISI mark with necessary PVC coupling eyc.,(The PVC pipe should be got approved by departmental officer before execution) | | 20 | Running Metre |
|---|
| 81 | 52 | Supplying and fixing of suitable PVC endcap (6kg/cm2) for 6\" dia.borewel of best quality with ISI mark (The PVC endcap should be got approved by the departmental officers before execution). | | 1 | Numbers |
|---|
| 82 | 53 | Supplying of best and approved quality of HDPE pipe of the following size including laying in the borewell and tying with copper wire etc., complete complying with standard specification. | | 1 | Cubic metre |
|---|
| 83 | 53.01 | 20mm dia HDPE Pipe | | 150 | Running Metre |
|---|
| 84 | 53.02 | 40mm dia HDPE Pipe | | 150 | Running Metre |
|---|
| 85 | 54 | Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications | | 1 | Numbers |
|---|
| 86 | 55 | Supplying and erecting best approved quality of 1.50 H.P Compressor with 2.00 HP Motor 3Phase electric motor 1440rpm (ISI make) with necessary specials such as aircooler, bed and including necessary bolts, nuts etc complete complying with standard specification. | | 1 | Numbers |
|---|
| 87 | 56 | Supplying and fixing colour galvanum sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. | | 24 | Square Metre |
|---|
| 88 | 57 | Calculation of SubTotal, GST and Total Amount carried out by system automatically | | | |
|---|
| 89 | 58 | Basic cost of value put to tender as per estimate | | 1 | (A) |
|---|
| 90 | 59 | Add GST at 12% | | 1 | (B) |
|---|
| 91 | 60 | Total Value put to Tender | | 1 | (A+B) |
|---|
| 92 | 61 | Differnce Amount (Excess/less) | | 1 | (D) |
|---|
| 93 | 62 | Quoted Amount (Basic Rate Only) | | 1 | (E) |
|---|
| 94 | 63 | Add GST at 12% of Quoted Amount | | 1 | (F) |
|---|
| 95 | 64 | Total Value of Quoted Amount including 12% of GST | | 1 | (E+F) |
|---|
