Rural Engineering Department has published Mn08135 Construction Of Bailey Bridge Khelakhong River On The Road From Sekmaijin To Maibam At 6 . 6Km. Submission Date for this Tender is 01-03-2021. Bridge Work Tenders in Thoubal Manipur. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of Bailey Bridge Khelakhong River on the Road from Sekmaijing to Maibam at 6.6km District:- Thoubal Block:- Kakching | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation for Structures\nEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and tracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material I) Ordinary Soil (i) Upto 3m depth. | BI01010001010000000000000515BI0100001113 | 690 | Cum |
| 2 | 1.1 | ii) Upto 3-6m depth | BI01010001010000000000000515BI0100001114 | 460 | Cum |
| 3 | 2 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8\nI) Granular material\n | BI01010001010000000000000515BI0100001115 | 258 | Cum |
| 4 | 3 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 i) Nominal mix 1:3:6 | BI01010001010000000000000515BI0100001116 | 11.8 | Cum |
| 5 | 4 | Plain/reinforced cement concrete in foundation complete as per drawings and technical specification Clauses 802, 803, 807, 1202 ans 1203\nIII R.C.C M 25 | 219.6 | Cum | |
| 6 | 5 | Supplying, fitting and placing HYSD bar reinforcement (Fe 500) in foundation complete as per drawings and technical specification Clauses 1000 & 1202 | 24.134 | MT | |
| 7 | 6 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204\nII P.C.C. grade M 25\n | 172.22 | Cum | |
| 8 | 7 | Supplying, fitting, and placing HYSD bar reinforcement in substructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 | 23.6587 | MT | |
| 9 | 8 | Reinforced Cement Concrete M 25 grade approach slab including reinforcement and formwork complete as per drawing and technical specifications Clauses 800 and 1211 | 12.6 | cum | |
| 10 | 9 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing | 24 | Each | |
| 11 | 10 | P.C.C. M 15 ordinary grade (1:2.5:5) levelling course below approach slab complete as per drawing and technical specifications Clauses 800 and 1211 | 3.21 | cum | |
| 12 | 11 | Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing | 205.08 | Cum | |
| 13 | 12 | Supply of DD span 100 feet Bailey Bridge Components (40 R Loading) i/c loading and unloading | 1 | no | |
| 14 | 13 | Assembly and launching of bailey bridge within a lead of 50 m but excluding mechanical transport and cost of fixing of decking. 4) steel decking DSR | 10 | nos | |
| 15 | 14 | Construction of RCC guide posts of 250 mm dia M15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification Clause 1608.2 | 12 | Each | |
| 16 | 15 | Approach Road = 0.265 Km | |||
| 17 | 16 | Setting Out | |||
| 18 | 17 | Construction of Job pillers as per Fig. 1600.1 (d) and Technical Specification Clause 1602.4 | 1 | Each | |
| 19 | 18 | Construction of RCC guide posts of 250 mm dia M15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification Clause 1608.2 | 20 | Each | |
| 20 | 19 | Construction of Embankment with Material Obtained from Borrow Pits | |||
| 21 | 20 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 | 1762.18 | cum | |
| 22 | 21 | Providing and Fixing 'Logo' of PMGSY Project | |||
| 23 | 22 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 | 1 | Each | |
| 24 | 23 | Providing and Fixing Citizen information Board of PMGSY Project(Steel Tube) | |||
| 25 | 24 | Providing and fixing of Citizen's Information Board for PMGSY Project with Logo as per MORD specifications and drawing. Two MS Plates of 1.6 mm thick, top and bottom plate duly welded with MS flat iron 25mm x 5m size on back on edges. The plates will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frames of the plates will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 750mm below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 | 1 | Each | |
| 26 | 25 | Providing and Fixing Maintenance information Board of PMGSY Project(Steel Tube) | |||
| 27 | 26 | Providing and fixing of Maintenance Board for PMGSY Project with Logo as per MORD specifications and drawing. Two MS Plates of 1.6 mm thick, top and bottom plate duly welded with MS flat iron 25mm x 5m size on back on edges. The plates will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frames of the plates will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 750mm below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 | 1 | Each | |
| 28 | 27 | Providing and Fixing PMGSY Logo Board at starting point(Steel Tube) | |||
| 29 | 28 | Providing and fixing of typical PMGSY Logo board as per MORD specifications and drawing.One plate of 1.6mm thick with MS flat 25mm x 5mm size on back on centre. The topmost diamond plate & mid. plate will be welded to 75mmx75mm of 12 SWG steel plate tube posts & duly embedded to CC 450mm x 450mm x 600mm below GL. Lettering and printing etc. will be with ready mixed synthetic enamel paint of superior. | 1 | Each | |
| 30 | 29 | Retro-reflectorised Traffic Signs | |||
| 31 | 30 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 | |||
| 32 | 31 | b) 600mm dia circle | 2 | Each | |
| 33 | 32 | Compacting original ground supporting subgrade | |||
| 34 | 33 | Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2. | 238.5 | cum | |
| 35 | 34 | Construction of Subgrade and earthen shoulder | |||
| 36 | 35 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. | 89.44 | cum | |
| 37 | 36 | Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. | |||
| 38 | 37 | (i) Using naturally occuring gravel | 168.94 | cum | |
| 39 | 38 | WBM Grading 3 | |||
| 40 | 39 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. | |||
| 41 | 40 | A) By Manual Means | 84.47 | cum | |
| 42 | 41 | Prime coat : Low porosity | |||
| 43 | 42 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 | 1126.25 | sqm | |
| 44 | 43 | Tack Coat | |||
| 45 | 44 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | 1126.25 | sqm | |
| 46 | 45 | 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder | |||
| 47 | 46 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. | |||
| 48 | 47 | Case-I By Manual Means | |||
| 49 | 48 | (i) Bitumen(S-90) | 1126.25 | sqm | |
| 50 | 49 | Seal Coat | |||
| 51 | 50 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 | |||
| 52 | 51 | Case - II : Type B | |||
| 53 | 52 | (i) Bitumen(S-90) | 1126.25 | sqm | |
| 54 | 53 | Toe wall 2.5M 6 NOS. | |||
| 55 | 54 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.I) ordinary soil i) upto 3m depth. | 351 | cum | |
| 56 | 55 | Providing concrete for plain/ reinforced concrete in open foundation complete as per drawings and technical specifications Clause 802, 803, 1202 &1203 i)PCC Grade M 10, II) Nominal Mix. 1:3:6 | 28.8 | cum | |
| 57 | 56 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clause 802, 804, 805, 806, 807, 1202 and 1204 II) PCC Grade M 15, ii)Nominal Mix. 1:2.5:5 | 414 | cum | |
| 58 | 57 | Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and tecnical specification Claise 1204.3.8 | 96 | cum | |
| 59 | 58 | Providing weepholes in brick masonry/stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100mm dai. AC pipe extending through the width of the structures with slope of 1(v): 20(H) towards drawing face complete as per drawing and tecnical specification Clauses 614, 709, 1204.3.7 | 54 | nos | |
| 60 | 59 | 5 years Maintenance | |||
| 61 | 60 | 1st year 248000 | |||
| 62 | 61 | 2nd year 372000 | |||
| 63 | 62 | 3rd year 620000 | |||
| 64 | 63 | 4th year 620000 | |||
| 65 | 64 | 5th year 620000 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
