Military Engineer Services-MES has published Provision Of Storage Shed For Tech Stores Of 626 Sata Bty And Certain Other Sanctioned Works Under Ge Sukna. Submission Date for this Tender is 04-03-2021. Cutting Crimping and Punching Tools Tenders in Sukna West Bengal. Bidders can get complete Tender details and download the document.
| Name of Work : PROVN OF STORAGE SHED FOR TECH STORES OF 626 SATA BTY AND CERTAIN OTHER SANCTIONED WORKS UNDER GE SUKNA | |||||
|---|---|---|---|---|---|
| Sl. No. | TEXT # | Item Code / Make | Quantity | Units | |
| 1 | 1 | BOQ Part-I (B/R Work) | |||
| 2 | 1.01 | Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.\n | 130 | Sqm | |
| 3 | 1.02 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.\n | 53 | Cum | |
| 4 | 1.03 | Excavating over areas, not exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.\n | 112 | Cum | |
| 5 | 1.04 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.\n | 26 | Cum | |
| 6 | 1.05 | Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.\n | 139 | Cum | |
| 7 | 1.06 | M&L hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. \n | 87 | Cum | |
| 8 | 1.07 | M&L 150 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, complete all as specified and directed.\n | 563 | Sqm | |
| 9 | 1.08 | M&L 100 mm thick, PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hard standing etc, complete all as specified and directed.\n | 563 | Sqm | |
| 10 | 1.09 | M&L forming 12 mm thick & 100 mm deep expansion joints in concrete slab filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and directed.\n | 25 | Per 10 RM | |
| 11 | 1.1 | M&L forming 50 mm deep & 10 mm wide contraction (Dummy) joint in concrete slab filled with sealing compound, Grade ‘B’ complete all as specified and directed.\n | 25 | Per 10 RM | |
| 12 | 1.11 | M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.\n | 7 | Cum | |
| 13 | 1.12 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in surface channel and drain complete all as specified and directed.\n | 0.5 | Cum | |
| 14 | 1.13 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc.complete all as specified and directed.\n | 20 | RM | |
| 15 | 1.14 | M&L RCC 1:1.5:3 Type A1 (using 20 mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.\n | 7.5 | Cum | |
| 16 | 1.15 | M&L RCC 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate) in beams cantilevers, bressummers lintels over 1.5m span complete all as specified and directed.\n | 4.5 | Cum | |
| 17 | 1.16 | M&L RCC 1:1.5:3 Type A1 (using 20 mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.\n | 5.5 | Cum | |
| 18 | 1.17 | M&L RCC 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate) in chajja complete all as specified and directed.\n | 2 | Cum | |
| 19 | 1.18 | M&L RCC 1:1.5:3 Type A1 (20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and as directed.\n | 0.5 | Cum | |
| 20 | 1.19 | Demolition of brick work or stone / boulder masonry, built in cement mortar and including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.\n | 0.5 | Cum | |
| 21 | 1.2 | M&L brick work with sub class 'B' brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.\n | 15 | Cum | |
| 22 | 1.21 | M&L brick work with fly ash brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and as directed.\nMake :- ICL Concrete Industries / Koshi Brick Industries Pvt Ltd / Vaishnodevi Buildcon Private Ltd / Shankar Oil & Saw Mills\n | 55 | Cum | |
| 23 | 1.22 | M&L brick work with fly ash bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos 8mm dia TMT bars at every fourth course complete all as specified and as directed.\nMake :- ICL Concrete Industries / Koshi Brick Industries Pvt Ltd / Vaishnodevi Buildcon Private Ltd / Shankar Oil & Saw Mills\n | 20 | Sqm | |
| 24 | 1.23 | Use and Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.\n | 20 | Sqm | |
| 25 | 1.24 | M&L use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed.\n | 45 | Sqm | |
| 26 | 1.25 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal in plan for rough finished surfaces of concrete complete all as specified and directed.\n | 55 | Sqm | |
| 27 | 1.26 | Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished surfaces of concrete, flat / curved complete all as specified and directed.\n | 5 | Sqm | |
| 28 | 1.27 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.\n | 4 | Sqm | |
| 29 | 1.28 | M&L 40 mm thick damp proof course in cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.\n | 26 | Sqm | |
| 30 | 1.29 | M&L 100 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, complete all as specified and directed.\n | 110 | Sqm | |
| 31 | 1.3 | M&L 75 mm thick, PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc. complete all as specified and directed.\n | 108 | Sqm | |
| 32 | 1.31 | M&L 50 mm thick, PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in floors complete all as specified and directed.\n | 110 | Sqm | |
| 33 | 1.32 | M&L for earth filling under floors, spreading and levelling in layers not exceeding 25 cm thick and well ramming including watering as required complete all as specified and as directed.\nNote:- Earth obtained from excavation after cleaning shall be reused in this item.\n | 10 | Cum | |
| 34 | 1.33 | M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.\nNote:- Consolidated thickness shall only be measured and paid.\n | 2 | Cum | |
| 35 | 1.34 | M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed.\n | 256 | Sqm | |
| 36 | 1.35 | M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed. \nNote:- WPC shall be measured and paid separately.\n | 286 | Sqm | |
| 37 | 1.36 | Supply only liquid water proofing compound complete all as specified and directed. \nMake:- Fosroc chemicals / STP Ltd / M/s Sika India Ltd / Hindcon Chemicals Limited\n | 20 | Kg | |
| 38 | 1.37 | M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish complete all as specified and directed. \nMake of oil bound distemper :- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) \nMake of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints\n | 256 | Sqm | |
| 39 | 1.38 | M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed.\nMake :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints\n | 286 | Sqm | |
| 40 | 1.39 | M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.\n | 840 | Kg | |
| 41 | 1.4 | All as per Sl item No. 1.39 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders.\n | 465 | Kg | |
| 42 | 1.41 | S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1998 grade St.-240 complete all as specified and directed.\n | 1467 | Kg | |
| 43 | 1.42 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. \nMake:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Prestar / Bhushan Power & Steel Ltd\n | 140 | Sqm | |
| 44 | 1.43 | All as per Sl item No. 1.42 above but plain steel sheet.\n\n | 15 | Sqm | |
| 45 | 1.44 | M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.\n\n | 5 | Kg | |
| 46 | 1.45 | M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in gap between roof sheet and brick wall, thickness of concrete bed exc. 5 cm and not exc. 10 cm thick & width not exc. width of one brick thick wall including necessary scaffolding and formwork complete all as specified and directed.\n | 26 | RM | |
| 47 | 1.46 | S&F 100 mm butt hinge, medium weight, cold rolled mild steel complete all as specified and directed. \nMake:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison\n | 15 | Each | |
| 48 | 1.47 | S&F 125 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.\nMake:- M/s Bharat / M/s Classic / Alans\n | 8 | Each | |
| 49 | 1.48 | S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.\nMake:- M/s Bharat / M/s Classic / Alans\n | 3 | Each | |
| 50 | 1.49 | S&F 100 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed.\nMake: M/s Bharat / M/s Classic / Alans\n | 2 | Each | |
| 51 | 1.5 | S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed.\nMake: M/s Bharat / M/s Classic / Alans\n | 8 | Each | |
| 52 | 1.51 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.\nMake: M/s Bharat / M/s Classic / Alans\n | 3 | Each | |
| 53 | 1.52 | S&F 300 mm long mild steel sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.\nMake:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison\n | 1 | Each | |
| 54 | 1.53 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.\n | 11 | Sqm | |
| 55 | 1.54 | S&F 4 mm thick non asbestos fibre cement building boards (designer pattern) fixed or laid / inserted to aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and including anodised aluminium snap grid frame work for false ceiling hanging from structural steel / scantling with 6 mm GI wire complete all as specified and directed.\nMake of boards:- Everest / Lafarge / Armstrong / Visaka Industries\nMake of aluminium snap grid:- Everest / Lafarge / Armstrong / Visaka Industries\n | 105 | Sqm | |
| 56 | 1.55 | M&L 10 mm thick vitrified ceramic tiles light shade (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. \nMake :- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd\n | 25 | Sqm | |
| 57 | 1.56 | All as per Sl item No 1.55 above but in skirting / dado etc. laid over and including screed bed 10 mm thick in CM 1:3.\nMake:- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd\n | 5 | Sqm | |
| 58 | 1.57 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed.\nMake:- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd\n | 75 | Sqm | |
| 59 | 1.58 | M&L coloured glazed ceramic tiles 300 x 450 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed. \nMake :- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd\n | 20 | Sqm | |
| 60 | 1.59 | S&F aluminium anodised powder coated frame work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates and including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, (thickness of powder coating not less than 50 micron) complete all as specified and directed.\nMake:- Indal Co / Hindal Co / Jindal / Ajit India\n | 45 | Kg | |
| 61 | 1.6 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. \nMake:- Saint Gobain / Modiguard / Asahi India / Triveni Float / IAG / Hindustan Pilkington\n | 7 | Sqm | |
| 62 | 1.61 | S&F 5.5 mm thick sheet glass selected quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. \nMake:- Saint Gobain / Modiguard / Asahi India / Triveni Float / IAG / Hindustan Pilkington\n | 10 | Sqm | |
| 63 | 1.62 | S&F steel window with side hung shutter and including box type hinges steel handle and steel peg stay with glazing bars dovetailed or welded complete all as specified and directed.\nMake:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri\n | 7 | Sqm | |
| 64 | 1.63 | All as per Sl item No 1.62 above but without glazing bars\n\n | 4.5 | Sqm | |
| 65 | 1.64 | S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed.\n | 80 | Kg | |
| 66 | 1.65 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with grade of steel conforming to Fe - 410 - W (Gde E - 250) Quality - A and complete all as specified and directed.\n | 50 | Kg | |
| 67 | 1.66 | S&F mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm but not exc. 10 cm long complete all as specified and directed.\n | 10 | Kg | |
| 68 | 1.67 | M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. \nMake :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)\n | 45 | Sqm | |
| 69 | 1.68 | M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.\nMake:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)\n\n | 19 | Sqm | |
| 70 | 1.69 | S&F 35 mm thick factory made flush door shutters solid core construction, with particle board core and plywood face fanels, commercial type on both side complete all as specified and directed. \nMake:- Modern Doors / Goel Brothers / Hindustan Housing Factory / Joinery Manufacturing Co.\n\n | 6.5 | Sqm | |
| 71 | 1.7 | S&F rolled mild steel in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed.\n | 10 | Kg | |
| 72 | 1.71 | Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.\n | 1 | Each | |
| 73 | 1.72 | S&F 105 x 60 mm size pressed steel door frames for doors with one or more rebates and including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. \nMake:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri \n\n | 5 | RM | |
| 74 | 1.73 | S&F factory made 35 mm thick 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces, size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. \nMake:- Modern Doors / Goel Brothers / Hindustan Housing Factory / Joinery Manufacturing Co.\n\n | 2 | Sqm | |
| 75 | 1.74 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.\n | 3 | Cum | |
| 76 | 1.75 | S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc.) and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.\nMake - Tata / Jindal Steel / Prakash / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / BST\n | 16 | RM | |
| 77 | 1.76 | All as per Sl item No 1.75 above but 20 mm bore.\n\n | 45 | RM | |
| 78 | 1.77 | S&F 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.\nMake:- Kirloskar / Leader / Zoloto / Venus / Audco / Upadhyaya\n | 1 | Each | |
| 79 | 1.78 | S&F 15 mm bore bib tap chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. \nMake:- ESSCO, Cat No. - DLX-511KN or equivalent in Prayag / Gem / Parko\n\n | 1 | Each | |
| 80 | 1.79 | S&F rotational moulded polyethylene water storage tanks of 1000 Litres capacity, multilayered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed.\nMake of tank:- Sintex / Polycon / Polywell\nMake of ball valve:- Prayag Cat No. 152 or equivalent in Polytuf \n | 1 | Each | |
| 81 | 1.8 | M&L cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. \nMake : Lovely / Anjali / Bharat Flooring / Hindustan tiles / Mehtab tiles\n | 21 | Sqm | |
| 82 | 2 | BOQ Part-II (E/M Work) | |||
| 83 | 2.01 | M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good surfaces to match with adjoining surface complete all as specified and directed.\nMake of cable:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt Ltd / Polycab\n | 33 | Point | |
| 84 | 2.02 | All as per Sl. item No. 2.01 above but for one 5 / 6 Amps socket outlet point on same board.\n\n | 3 | Point | |
| 85 | 2.03 | All as per Sl. item No. 2.01 above but for one 5 / 6 Amps socket outlet point on independent board.\n\n | 9 | Point | |
| 86 | 2.04 | All as per Sl. item No. 2.01 above but for one light point controlled by two, 2 - way switches.\n\n | 2 | Point | |
| 87 | 2.05 | M&L point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for 15 / 16 Amps socket outlet on independent board and including cutting chasing (as required) and making good surfaces to match with adjoining surface complete all as specified and directed.\nMake of cable:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt Ltd / Polycab\n | 12 | Point | |
| 88 | 2.06 | M&L point wiring with 4 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 4 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for 20 / 25 Amps socket outlet / power unit on independent board and including cutting chasing (as required) and making good surfaces to match with adjoining surface complete all as specified and directed.\nMake of cable:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt Ltd / Polycab\n | 1 | Point | |
| 89 | 2.07 | S&F switch piano flush type one way, 5 / 6 Amps, 240 volt complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n | 45 | Each | |
| 90 | 2.08 | All as per item No. 2.07 above but two way switch.\n\n | 4 | Each | |
| 91 | 2.09 | S&F socket outlet 5 pin 5 / 6 Amps, 240 volts complete all as specified and directed. \nMake :- Havells / Anchor / Legrand\n | 12 | Each | |
| 92 | 2.1 | S&F switch socket combination 2 in 1, 6 Pin, 5 & 15 Amp, flush type universal complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n | 12 | Each | |
| 93 | 2.11 | S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed.\nMake:- Havells / Anchor / Legrand\n | 31 | Each | |
| 94 | 2.12 | S&F stepped type electronic fan regulator two module, with 5 step, AC 50 Hz 230/240 Volts grade complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n | 6 | Each | |
| 95 | 2.13 | S&F MCB protected power unit with enclosure suitable for flush mounting including 25 amp socket, 3 pin plug and one MCB DP and starter 25 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. \nMake :- Havells, Model - DHDUCDP0253016-25 or equivqalent in L&T / Legrand / Siemens / ABB / Schnieder / Hager\n | 1 | Each | |
| 96 | 2.14 | S&F LED light fitting 1 x 20 watt batten type 230 Volts, extruded aluminium housing, with luminous efficacy 100 Lumen/watt (minimum), suitable for surface mounting, with integrated high effeciency driver etc. all electrical accessories, pre-wired upto terminal block, fixed with 02 Nos of PVC round / square blocks, screws etc. inlcuding electrically connecting complete all as specified and directed.\nMake:- Surya, Model - SLE BT 20 IL or C&S, Model - NAKSHATRA/20W or HPL, Model - HLPT51520CW or equivalent in Crompton\n | 18 | Each | |
| 97 | 2.15 | All as per item No. 2.14 above but 1 x 9 / 10 watt.\nMake:- Surya, Model - SLE BT 10 or C&S, Model - NAKSHATRA/10W or Crompton, Model - LDL-10-CDL or equivalent in HPL\n | 2 | Each | |
| 98 | 2.16 | S&F 10 watt LED Bulk head fitting, Poly carbonate housing with diffuser including electrically connecting complete all as specified and directed.\nMake:- \nSurya Model - SLE BH 10W or Crompton Model - LBHP-10-CDL or equialent in C&S / HPL\n | 4 | Each | |
| 99 | 2.17 | M & L concealed sub main wiring with 2 runs of 2.5 sqmm main wire along with 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed.\nNOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.\nMake of cable:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt Ltd / Polycab\n | 40 | RM | |
| 100 | 2.18 | All as per item No. 2.17 above but with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire.\n\n | 60 | RM | |
| 101 | 2.19 | All as per item No. 2.17 above but with 2 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire.\n\n | 110 | RM | |
| 102 | 2.2 | S&F MCB DB, SPN 8 way, IP-43, IK 09, double door type with metal door, 100A copper bus bar for fixing MCB, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.\nMake :- L&T / Legrand / Siemens / ABB / Schnieder / Havells / Hager\n | 2 | Each | |
| 103 | 2.21 | S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. \nMake :- L&T / Legrand / Siemens / ABB / Schnieder / Havells / Hager\n | 10 | Each | |
| 104 | 2.22 | All as per items No 2.21 above but MCB SPN.\n\n | 1 | Each | |
| 105 | 2.23 | All as per items No 2.21 above but MCB SPN 40 to 63 Amp.\n\n | 1 | Each | |
| 106 | 2.24 | S & F blanking plate suitable for distribution boards complete all as specified and directed.\nMake :- L&T / Legrand / Siemens / ABB / Schnieder / Havells / Hager\n | 2 | Each | |
| 107 | 2.25 | M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and directed.\n\nNote:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.\n | 2 | Each Set | |
| 108 | 2.26 | S&F 1.5 TR capacity hi wall split type air conditioner units indoor / outdoor complete with cordless remote control unit and with in-built air ioniser and plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 complete all as specified and directed.\nMake:- Blue Star / Voltas / Hitachi / Daikin / Canters\n | 1 | Each | |
| 109 | 2.27 | S&F ceiling fan 1200 mm (minimum) sweep, AC single phase 230 V, 340 RPM (minimum) suspended from fan hook and including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 Sqmm copper conductor from ceiling rose to ceiling fan complete all as specified and directed. \nMake :- Bajaj / Havells / Orient / Crompton / Almonard\n | 6 | Each | |
| 110 | 2.28 | S&F exhaust fan 300 mm sweep, metal body, 1200 RPM (minimum), AC single phase, 230 V, 50Hz with bird guard, nuts, screws, bolts including electrical connection, writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed.\nMake :- Crompton / Bajaj / Orient / Havells / Almonard\n | 3 | Each | |
| 111 | 2.29 | S&F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input voltage variation between 170 volt to 250 volt with output voltage stabilized at 230 volt with accuracy of +/- 2.5% and of capacity 3 KVA complete all as specified and directed.\nMake:- Voltamp / APLAB / Andrew Yule / Brentford / AE / Vintek (Volina)\n | 1 | Each | |
| 112 | 2.3 | S&F metal plug and socket DB, double pole 240 volts and including one 20 Amp MCB SPN, C-Curve complete all as specified and directed. \nMake :- Legrand / Siemens / ABB / Schneider / Havells / Hager\n | 2 | Each | |
| 113 | 2.31 | S&F 40 mm bore galvanised steel water tubing, light grade with necessary fittings, fixed along electric pole etc, for cable protection complete all as specified and directed.\nMake - Tata / Jindal Steel / Prakash / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / BST\n | 1 | RM | |
| 114 | 2.32 | Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 35 Sqmm x 3.5 Core, laid in trenches / duct / on pole complete all as specified and directed.\nMake :- Havells / KEI / Polycab / Finolex / Gloster cables Ltd / Asian Cable / RR Kabel Ltd.\n\n | 80 | RM | |
| 115 | 2.33 | M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. \nNote:- Punned thickness shall only be measured and paid.\n | 7 | Cum | |
| 116 | 2.34 | Supply & laying sub class 'B' bricks of old size, laid along alignment of cable as protection to cable in trenches complete all as specified and directed.\n | 640 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
