Tender For Supply Of C.I./C.S. Casted Item, kichha-Uttarakhand

Tender For Supply Of C.I./C.S. Casted Item-C.I. Casted Items On New Basis 2 C.I. idler for cane carrier (I) As per drawing no. KSC/CC1/4/17 3 C.I. Pulley (as per drawing) With machining 4 C.I. Coupling Different Size (as per drawing) 5 C.I. casting various size (Gulla) As per drawing with rough machining. Different size 6 C.I. Casted Items (On Conversion Basis) 7 C.I. idler for cane carrier (I) As per drawing no. KSC/CC1/4/17 8 C.I. Pulley (as per drawing) With machining 9 C.I. Coupling Difrent Size (as per drawing) 10 C.I. casting various size (Gulla) As per drawing with rough machining. Different size 11 Cast Steel Spur Gear & Pinion NEW BASIS 12 Cast steel & Spur gear- 72 TeethFace Width- 75mm, Bore- 50mm OD- 473 mm, Module- 6.4. Approx Weight 90 Kg 13 Cast steel & Spur gear- 26 TeethFace Width- 75mm, Bore- 45mm OD- 178.24 mm, Module- 6.4- Approx Weight 11.6 Kg 14 Cast steel Pinion- 24 TeethFace Width- 70mm, Bore- 45mmOD- 166.4 mm, Module- 6.4-Approx Weight 9.7 Kg 15 Cast steel Pinion- 34 TeethFace Width- 75mm, Bore- 40mm OD- 308 mm, Module- 8.56. Approx Weight 20 Kg 16 Cast steel Gear Pinion- 50 Teeth As per drg no. Mills-138Approx Weight 11 Kg 17 Cast steel Sprocket- 13 Teeth 6” PitchAs Per Drg. Mills-27 18 Cast steel Pinion- 18 TeethFace Width- 75mm, Bore- 45mm OD- 128 mm, Module- 6.4.Approx Weight 5 Kg 19 C.S.Scaper for mills duly machined as per sample Drg.no ksc/MH/91618 Approx wt-190kg each 20 Cast steel trash plate (lenth 1680 MM) made of is 2708 grade III duly rough machined as per drg.no – KSC/MH/285/22 21 C.S. Wheel for cane unloader bridge As per drg.no. KSC/UNLOADER/2/17.Approx wt 185 kg. 22 C.S Gear 68 Teeth, Module-6.14Face Width-65mm, O.D--430mmdrg no.-ksc/unloder/17 23 C.S.WHEEL FOR CANE UNLODER TROLLY DRG NO.-KSC/CR/145 Approx.wight-55kg 24 C.S.PINION-18TEETH, MODULE-6.14, F.W-65 OD-122.8Drg. No.-KSC/Unloder/17 25 C.S. Sprroket 6 Pich 14 Teeth Drg No.-ksc/m/1565 (Tail End) Material 2708 26 C.S. Sprroket 6 Pich 14 Teeth Drg No.-ksc/m/1564 (Driving Shaft) Material 2708 27 C.S.Sproket-36 teeth for duplex chain 2 1/2 Pitch Material 2708 DRG No KSC/Boiler-163 28 C.S. Sprocket 17 teeth for Duplex Chain 2 1/2 Pitch Material 2708 DRG No-KSC/MILL/4887 29 Opertuinity Device of Trash Turner Beam Material-SS Drg No. MILLs-8488 30 c.s. pinion duly hardent tempered and grinded- 24 Teeth, Module-10, FW-110mm OD-260mm Bore-50mm 31 c.s. pinion duly hardent tempered and grinded- 24 Teeth, Module-8, FW-120mm OD-208 mm Bore-50mm 32 C.S.WORM SHAFT ( AS per sample) for mill 33 C.S. MILL COUPLING (WEIGHT 700Kg APPROX) As per Drawing 34 C.S. MILL CROWN PINION 16 TEETH (WEIGHT 1500 Kg.) As per Drawing 35 Cast Steel Spur Gear & Pinion ON CONVERSION BASIS 36 Cast steel & Spur gear- 72 TeethFace Width- 75mm, Bore- 50mm OD- 473 mm, Module- 6.4. Approx Weight 90 Kg 37 Cast steel & Spur gear- 26 TeethFace Width- 75mm, Bore- 45mm OD- 178.24 mm, Module- 6.4- Approx Weight 11.6 Kg 38 Cast steel Pinion- 24 TeethFace Width- 70mm, Bore- 45mmOD- 166.4 mm, Module- 6.4-Approx Weight 9.7 Kg 39 Cast steel Pinion- 34 TeethFace Width- 75mm, Bore- 40mm OD- 308 mm, Module- 8.56. Approx Weight 20 Kg 40 Cast steel Gear Pinion- 50 Teeth As per drg no. Mills-138Approx Weight 11 Kg 41 Cast steel Sprocket- 13 Teeth 6” PitchAs Per Drg. Mills-27 42 Cast steel Pinion- 18 TeethFace Width- 75mm, Bore- 45mm OD- 128 mm, Module- 6.4.Approx Weight 5 Kg 43 C.S.Scaper for mills duly machined as per sample Drg.no ksc/MH/91618 Approx wt-190kg each 44 Cast steel trash plate (lenth 1680 MM) made of is 2708 grade III duly rough machined as per drg.no – KSC/MH/285/22 45 C.S. Wheel for cane unloader bridge As per drg.no. KSC/UNLOADER/2/17.Approx wt 185 kg. 46 C.S Gear 68 Teeth, Module-6.14Face Width-65mm, O.D--430mmdrg no.-ksc/unloder/17 47 C.S.WHEEL FOR CANE UNLODER TROLLY DRG NO.-KSC/CR/145 Approx.wight-55kg 48 C.S.PINION-18TEETH, MODULE-6.14, F.W-65 OD-122.8 Drg. No.-KSC/Unloder/17 49 C.S. Sprroket 6 Pich 14 Teeth Drg No.-ksc/m/1565 (Tail End) Material 2708 50 C.S. Sprroket 6 Pich 14 Teeth Drg No.-ksc/m/1564 (Driving Shaft) Material 2708 51 C.S.Sproket-36 teeth for duplex chain 2 1/2 Pitch Material 2708 DRG No KSC/Boiler-163 52 C.S. Sprocket 17 teeth for Duplex Chain 2 1/2 Pitch Material 2708 DRG No-KSC/MILL/4887 53 Opertuinity Device of Trash Turner Beam Material-SS Drg No. MILLs-8488 54 c.s. pinion duly hardent tempered and grinded- 24 Teeth, Module-10, FW-110mm OD-260mm Bore-50mm 55 c.s. pinion duly hardent tempered and grinded- 24 Teeth, Module-8, FW-120mm OD- 208 mm Bore-50mm 56 c.s.worm shaft ( as per sample) for mill 57 C.S. MILL COUPLING (WEIGHT 700Kg APPROX) As per Drawing 58 C.S. MILL CROWN PINION 16 TEETH (WEIGHT 1500 Kg.) As per Drawing

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	04-06-2025	Date Extension	Date	09-06-2025

INR 590 /-

INR 30000.0 /-

Refer document