Irrigation Department has published Supply , Erection And Commissioning Of 1 No . Motor Control Center 400 Amp At Pump House Pataudi-2 And 2 No . 30 Hp Lt Motor And 2 No . Single Phase Portable Arc Welding Set At Pump House Dd-6 And Pataudi-2. Submission Date for this Tender is 27-02-2021. Electrical Panel Tenders in Executive Engineer, W.S. Mech. Division, Rewari Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Feb-2021 | Corrigendum | Date | 27-02-2021 |
| Name of Work: Supply, erection and commissioning of 1 No. Motor control center 400 Amp at Pump House Pataudi-2 & 2 No. 30 HP LT Motor & 2 No. Single Phase Portable ARC welding set at Pump House DD-6 & Pataudi-2. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply, erection and commissioning of 400Amp. Motor Control Center with incomerof MCCB of 400Amp 4 pole with 4 nos. outgoings, 02 nos. MCCB of 200 Amp and 1 no MCCB for 100 Amp. capacity alongwith an additional MCB of 63 Amp for lighting loads, indicators, relays, meters, push buttons, bus bars and with 2 nos. Fully Automatic Star Delta Starters (complete in all respect like relays, indicators timer etc.) of 60 H.P. each with contactor rating as 120A, 80A, 50Amp. & 2 no starters of 30 H.P. with contactor rating as 60A, 40A, 30 Amp. with designed Capacitor bank of 40KVAR capacity with 4 step APFCR, suitable size MCCB, Selector Switch, duty contractors, discharge resistors, digital display instruments & other allied accessories for automatic as well as manual operation of Capacitor Bank suitable for 2 nos. 60 H.P LT motor and 2 no. 30 H.P. LT motor as per design with stand of MS Channel/angle (1 feet height from floor level) & as per approved specification of deptt. (as per Annexure-C) at pataudi – 2. | 1 | 1 | No. |
| 2 | 2 | Supply, erection and commissioning of solid shaft squirrel cage 30 H.P. LT motor, 1440 rpm, 3 phase, 415V induction Motor TEFC Motor of IE 2 as per IS 12615. The color shade shall be RAL 7031, suitable for 5 Cs pump complete in all respect & as per approved specification of dept. and as per site requirement (as per Annexure-B) at DD – 6. | 2 | 2 | No. |
| 3 | 3 | Supply of single phase portable arc welding set 240 V Rated input voltage, 150-240 Amp. Current rating, 50HZ, air cooled according to IEC standard, IP-21 protection for indoor and IP-23 protection for outdoor, upto 4mm electrode with 50 mtr. Long suitable size cable as per site requirements with all accessories i.e welding road holder, welding lead, 2 nos. face shield for eye protection, etc. Make- esab, shakti, i-Bell. | 3 | 2 | No. |
| 4 | 4 | Supply and fixing of 150mm2 Aluminum cable 3.5 core, XPLE insulated, armoured cable. | 4 | 35 | Mtr. |
| 5 | 5 | Make of Motors - LV Motor- Marathon, ABB, Kirloskar Electric, Siemans, Crompton, Jyoti, BCH, Bharat Bijli.\nMake of Panels - LV Panel- Siemans, ABB, L&T, Schneider, G.E. C&S, Havells, BCH, Legrand & AE.\nTerms & Conditions:-\n1. The tender rate will be inclusive all taxes as applicable including GST.\n2. The tender rate will be for F.O.R. destination and inclusive of all incidental charges, enroute & at destination. Nothing extra shall be paid separately.\n3. WWC@1% will be deducted from the each bill of the agency.\n4. The rate should be inclusive carriage, fitting and allied parts complete in all respect with left over items (if any) as per site requirement.\n5. Goods which to be used / supplied should be as per sample and conforming to the site condition & also conforming to I.S. Specification.\n6. Department will not be responsible for non submission of BOQ / Bid Document online by due date, due to any fault of internet/ E-tendering.\n7. Third Party Testing by T.P.I.A. will be carried out in the presence of departmental representative at the manufacturer premises and cost of the same will be borne by the successful agency. \n8. Old scrap will be property of the department, if any.\n9. Completion period – completion period is 4 months.\n10. Agreement for maintenance / service of the work will be drawn with L-1 Agency on the terms and conditions given in SLA issued by C.E./LCU, I&WR Department Haryana Panchkula letter No. 1089-91/NABARD/2020 dated 16.09.2020 (copy attached). Agreement shall be for five years or 10000:00 Hrs. of working of electro mechanic equipments from the date of commencement of the agreement. \n11. Payment schedule, as per bidding documents. \n12. Payment shall be made on finished goods and not on casting only.\n13. The material will be supplied as per drawing and newly approved technical specifications laid down in tender documents & subsequent submission by bidder in this regard.\n14. Successful agency will submit drawing of the work within week period from the date of approval of rate by competent authority.\n15. Authorization from OEM be attached if tenderer is not a manufacturer. \n16. Panels be manufactured by original manufacturer either by approved brands themselves or their authorized original equipment manufacturers under their brand name. The inspection is also allowed at their channels partner’s work with the condition that all drawings / test certificates shall be from the original equipment manufacturer. System house of approved brand are not acceptable and rating IP 54. \n17. Each page of bid book will be signed by the tenderer as a token of acceptance of terms and conditions. \n18. Bidders may visit to the sites before quoting the tender rates. \n |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
