Supply The Furniture, Cooch Behar-West Bengal

Supply The Furniture.- 1. Single bed made of mild steel as per ISO9001:2020 and should have the service set up at district head quarter. The square legs are made of 38.1 mm X 1.2 mm thick MS tube having end crap. 2 square tubes o 25mm X 1mm to be provided in the head board & leg board side. Top will be MS perforated 1.2.mm thick. Underneath of the sheet there will be 4 supporting bars made of 50.8 X 25.4 X 1.2 mm thick MS tube. The main structure frame will made of 50.8 X 25.4 X 1.2 mm thick MS tube. A 100 X 100 X 3.2 mm thick support bracket welded with tube & bolted with bed frame with M8 Bolt. Overall size of bed 1800 mm (L) X 900 mm (W) X 650mm (H) and bed stead height 400mm. No welding on the top age and Good quality 12mm plywood should also be provided. 52 Nos 2. Store well having 5 loading levels of dimension 900mmw X 450mmD X 1830 mm H with rigid knocked door construction made of prime quality CRCA steel 0.6mm thick & front frame and slaves of 0.8mm thickness. The Almirah should have 4 Nos. adjustable slaves with uniformly distributed load capacity per each full self is 80 kg maximum All finished with epoxy powder coating of 50 microns. 01 No 3. Table T 31 should be of size 900 W X 590 D X 750 H with 1 drawer of size 355.5 W X 559 D X 167 H having top made of prelaminated particle board of 18 + 5 mm thick with 2 mm thick PVC edge banding on all sides and metal under structure made C frame made from 0.9 + 0.09 mm thick powder coated 50 microns [Reading Table] 51 Nos. 4. Fixed type Arm chair should be having seat and back shell made of 1`.2 + 0.1 cm thick hot pressed ply wood and laminated with natural veneer of backside 42cm W X 45 cm H and seat six 44 cm W X 40 cm D . Reading Chair. 51 Nos. 5. Ex. St. Chair of dimension back size 46cm(W) X 27cm (H) seat size 46cm(W) X 40cm(D). Seat and should be made of seasoned wood and plywood which should be upholstered with black synthetic leather and polyurethane foam. Arm rest tube should be made of 2.54 X 0.2 cm thick MS erw tube & powder coated ( DFT 40-60 microns) 12 Nos. 6. Canteen SS Table with stainless steel top having under structure consisting of main legs at both ends fabricated CO2 welded MS tube of section 50.8mm X 50.8mm (IS:7138 ERW tube 50.8 square X 16 bg) Finished with powder coating connected using cross connectors made of MS tube of section 50.8mm X 50.8 mm(IS:7138 ERW tube 50.8 square X 16bg with two 100 X 55 X 5 mm L shape connector brackets (IS;2062 5mm HR). Stainless steel top is made of 1mm thick SS 304 sheet with brushed steel finished reinforced with 18 mm prelaminated board with double bent of sheet on all 4 sides. A gap of 20 mm should be maintained between the under structure & top using spacers made of plastic moulded with nylon 6. Dining Table 04 7. Moulded Plastic Chair should be made with metal under structure having seat & back are injection moulded in polypropylene. They should be snap fitted on the under structure assembly and fixed with self tapping screw. Back size; 38 cm (W) X 25 cm (H). Seat size – 40cm(W) X 41cm(D)Overall size of the chair should be 47cm W X 48.5cm D X 79cm H and seat height should be 43cm. Dining Chairs 24

Refer document

Refer document