Indian Institute Of Carpet Technology-IICT has published Procurement Of Testing Equipments For Up-Gradation Of Laboratory As Per Nit. Submission Date for this Tender is 04-03-2021. Weight Measuring Instrument Tenders in Indian Institute of Carpet Technology Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 22-Feb-2021 | CHANGE IN TENDER DOCUMENT TERMS AND CONDITIONS | Technical Bid | 04-03-2021 |
| Name of Work: PROCUREMENT OF TESTING EQUIPEMENTS FOR UP-GRADATION OF LABORATORY | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Yarn Un-evenness Tester\nInstrument is required for testing of un-evenness of textile strand viz. sliver, roving & yarn, and also imperfections and hairiness of the spun yarn by means of continuous runs based on capacitance measurement for un-evenness and photoelectric measurement for yarn hairiness. \n\nInstrument should possess following features and specifications :\nMeasuring Device , featuring-\n•Several measuring condensers, grouped into one unit for strands of varying linear density.\n•Package holders, guides, tension Devices and take-up mechanism, which allows for, or assist in , uniform delivery of the strand at the specified speed without undue acceleration or deceleration and at a reasonably constant tension.\n•An adjustable speed motor to advance the strand \n•Signal processing unit & recorder which indicates the values of CV or U and can calculate the imperfections, hairiness index in yarn and can present -\n• Various graphs / Test details of the periodic variations of the linear density and hairiness. \n• Numerical Results required : Um , CVm , CVm at various cut lengths ( 1,3,10,50,100m) ,Irregularity index , Max & Min value of mass ( 1,3,10 m,) , Imperfections (Thin -30,-40,-50 -60%) , Thick (+35 ,+50 ,+70 ,+100) , Neps (+140 , +200 , +280 ,+ 400%) , Relative Count , Hairiness Index & sh ,Max. & Min. value of hairiness ( 1,3,10 m cut length )\n•Graphical Results for mass and Hairiness : \n Diagram , Diagram at different cut lengths , spectrogram, Variance length curve and Histogram\n•Selection of running speed ; \n-Yarn -25 ,50,100,200,400m / min ,\n-Sliver & Roving :25, 50 and 100 m / min\n\n•Testing Time : 0.5 , 1.0 , 2.5,5,10 & 20 Min \n\n•Inspection ( stop ) facility \n•Option for Flexible and consolidated test reports .\n\nOther requirements: \nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\n\nNote: Calibration certificate should be provided \n | item1 | 1 | Nos |
| 2 | 2 | Direct Count Balance\nIt should have following specifications:\n• Consists of an electronic balance (220 grams x 0.001 grams) with internal and external custom software which calculates yarn, sliver and roving count along with number of tests, average value, CV % and Standard Deviation.\nOther requirements:\nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\nNote: Calibration certificate should be provided\n | item2 | 1 | Nos |
| 3 | 3 | Electronic Twist Tester\nIt should have following specifications:\n• Automatic motorized double yarn twist tester with auto stop.\n• Having Digital counter meter with and adjustable pretension mechanism\n• To analyze both S and Z type of twist.\n• Adjustable test length ( 1 to 50 cm)\nOther requirements:\nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\nNote: Calibration certificate should be provided\n | item3 | 1 | Nos |
| 4 | 4 | Shade card winding machine\nIt should have following specifications:\n• Completely automatic, with digital display.\n• Single geared motor with traverse mechanism.\n• 10 Bobbin at a time can be used.\n• Provided with stand to accommodate 10 baby cones.\n• Has digital counter to set the number of rotations\n• Rust proof coating\n• At least 500 empty cards shall be provided\nOther requirements:\nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\nNote: Calibration certificate should be provided\n | item4 | 1 | Nos |
| 5 | 5 | Universal Tensile Strength Tester\nTo determine Tensile strength and elongation of fabric, carpet and thread as per CRE principle . It should have following specifications:\nInstrument Detail : \n The instrument should be digital with window based software having automatic control of unit , user friendly interface and presentation of test reports together with data storage and retrieval with following features -\n\nCapacity -20 KN \nType of loading : Axial \nLoad cell capacity 20 KN ( measuring range 20 N to 18 KN as per DIN EN ISO 7500 )\nAccuracy of load cells : Both 0.5 % & 1% as per DIN EN ISO 7500-1 \nBreaking Force of load cell : 300 % of the maximum load capacity of the load cell \n\nDigital Servo Drive system \n\nSpeed of the machine : 0.001 mm/min to 500 mm/min ( step less variable ) \n\nSafety Features : In built protection / control in the machine for following conditions \n- Load cell overall protection via software limit switch \n- Both hardware & software limit switch for over travel of traversing crosshead in both direction (Up & down ) \n- Automatic stopping & return of the machine to the original position with a click of a button \n- Emergency switch \n | item5 | 1 | Nos |
| 6 | 6 | MotorizedDigital Wrap Reel\nIt should have following specifications:\n\n• Digital panel with resettable revolution counter and auto stop.\n• Supplied with a wheel of 1 meter or 1.5 yards perimeter with support creels / Bobbin holding stand to accommodate bobbins up to 100mm. \n• Adjustable double bar yarn tensioner and yarn guides\n• Five leas can be made together( Min)\n• Complete with all accessories, 5-station yarn package stand and collapsible swift.\n\nOther requirements: \nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\nNote: Calibration certificate should be provided \n | item6 | 1 | Nos |
| 7 | 7 | Motorized Yarn Appearance Board Winder\nInstrument consists of a yarn wrap board. The board is rotated automatically to wrap yarn over it .The yarn is guided on to the board through a yarn guide , which moves parallel to the pivoting axis of the board giving uniformly spaced wraps . The guide is positively linked to the rotation of the board with the help of a chain and sprocket drive. A set of change gears gives six different spacing to the yarn for wrapping yarn of different counts. A spring loaded adjustable tensioning arrangements provide the desired tension to the yarn. A specially designed bobbin holder provides holding of yarn bobbin to check. Testing is carried out as per ASTM D 2255. It should have following specifications:\nSpecification: Instrument should be built on rigid heavy base with standard finish. Instrument and its all components should be corrosion resistant. Traverse speed option for yarn wrapped @ 20,22,26,32,38,& 48 ends per inch .\nSize of Acrylic tapered Board : 28.5 cm x 18 cm , taper angle 2 Degree 28.5 cm x 16 cm Size Acrylic rectangular Board : 28.5 cm x 18 cm \nStandard yarn spacing : 20,22,26,32,38, and 48 wraps per inch\nAccessories Required : Pointing needle 04 sets of tapered and rectangular boards each (Both white and Black Boards are required).\nOne complete set of photographic standards for yarn grading in compliance with ASTM D 2255 (Range –Ne 1-12 , Ne 12-24 , Ne 24-36 , Ne 36-50 , Ne 50-75 , Ne 75-135 in std size 25 x15 inch\nOther requirements: \nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\nNote: Calibration certificate should be provided\n | item7 | 1 | Nos |
| 8 | 8 | Laundro-Meter\nThe instrument should conform to IS/ISO 105 C10/ AATCC-61 standards/IS) 105 C06. It should have following specifications:\n• It should handle both 08 numbers of 500ml capacity canisters ( pots) or 04 numbers 1200ml capacity canisters (pots) in the same machine. \n• Temperature range: It should meet the requirement of IS/ISO 105 C10 E(5) of 95±20C\n• Number of stainless steel canister :08 numbers with capacity 500 ml and 04 numbers with capacity 1200 ml\n• Stainless steel ball 6 mm diameter:100 numbers\n• Stainless steel disc: 25 numbers as per AATCC metod\n• Carriage RPM :40±2\n• Corrosion resistant body with Inner chamber and top cover shall be of stainless steel and \n• Multifibre test fabric as per IS/ISO and AATCC method: 50 meter\n• Gray scale of change in shade and staining as per ISO and AATCC standard \nOther requirements: \nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\nNote: Calibration certificate should be provided\n | item8 | 1 | Nos |
| 9 | 9 | Crock Meter\nThe instrument should conform to IS: 766/ AATCC-8/ISO X-12 standards. It should have following specifications:\n• Diameter of the Rubbing Finger : 16 mm & 25 mm\n• Load on the Finger : 9 N & 20 N\n• Length of the Traverse : 100 ±5 mm\n• Counter (Re-settable) : 4-Digit Counter\n• Rubbing cloths: 500 pieces\n• Motor driven auto stop\nOther requirements: \nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\n\nNote: Calibration certificate should be provided\n | item9 | 1 | Nos |
| 10 | 10 | Pile Thickness Guage\nElectronic Hand operated micrometer with following specifications :\n• Measuring Range : 0-30 mm \n• Accuracy : 0.02 mm \n• Head Diameter( Pressure Foot) : 12 mm \n• Lower Plate diameter(Anvil):50mm&75mm( interchangeable) \n• Test Pressure : 0.5 , 1 , 2 , 5 , 10 & 20 Kpa\n\nOther requirements: \nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\n\nNote: Calibration certificate should be provided\n | item10 | 1 | Nos |
| 11 | 11 | Moisture Meter\nIt should have following specifications:\n• Supplied with 3 probes for fiber, yarn and fabric, blend conversion charts and carrying case interchangeable electrodes suitable for cones , hanks , bales and fabric \n• High frequency resistance measurement \n• Measuring accuracy : + 0.1 % \n• With calibration unit \n\nOther requirements: \nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\n\nNote: Calibration certificate should be provided\n | item11 | 1 | Nos |
| 12 | 12 | Tuft withdrawl Tester\nIt should have following specifications:\n• Micro-computer control, large LCD display, automatic data processing.\n• Professional carpet tufting clamp.\n• Maximum load range=120N\n• Power supply =AC220v+_ 10%,50HZ\n\nOther requirements: \nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\n\nNote: Calibration certificate should be provided\n | item12 | 1 | Nos |
| 13 | 13 | GSM Cutter\nIt should have following specifications:\n\n• Cutting area: 100 cm². \n• Cutting depth: 5 mm. Model with 4 blades. \n• Equipped with one cork support plate and four spare blades.\n• Dimensions: (L) 170 x (W) 170 x (H) 150 mm\n\nOther requirements: \nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\n\nNote: Calibration certificate should be provided\n | item13 | 1 | Nos |
| 14 | 14 | Electronic Weighing Balance\nIt should have following specifications:\n\n• Weighing capacity 250 g and accuracy : 0.001 g \n• Digital reading ( LCD display) \n• RS 232 Port \n• Pan size : 12 cm \n• Sealed Housing \n• Auto Calibration\n\nOther requirements: \nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\n\nNote: Calibration certificate should be provided\n | item14 | 1 | Nos |
| 15 | 15 | Industrial Heater Press\nIt should have following specifications:\n\n• Laboratory model with press head size approximately 2.5 Inch X 2.5 inch\n• For label fusing purpose on carpet \n• Digital Temperature control \n• Digital Timer\n• Adjustable Pneumatic Pressure\nOther requirements: \nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\n\nNote: Calibration certificate should be provided\n | item15 | 1 | Nos |
| 16 | 16 | Magnetic Stirrer (With Hotplate)\nIt should have following specifications:\n\n• Max Speed -1200 RPM \n• Stirring capacity – 2 Ltr\n• Heating capacity – 300 watt \n• Solid State Electronic Speed Controller: 1 No\n• Display – Digital \n• Teflon coated Paddle dimension - 9×35 mm\n• Totally enclosed unit. Designed for use even in corrosive atmosphere and portable\n• Set - up plate material- Stainless Steel\n• Stir bar length -25 mm\nOther requirements: \nAll accessories as required (Pl Provide list of the accessories with Technical Bid)\n\n.Note: Calibration certificate should be provided\n | item16 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
