Institute Of Medical Sciences-IOMS has published Vertical Expansion Of Gynae Ot Building For The Accomodation Of Senior Resident Doctor ( Sr ) - 2 Nos . ( Male , Female ) , Junior Resident Doctor ( Jr ) - 2 Nos . ( Male , Female ) , Nurse Duty Room , Attendant Duty Room , Technician Duty Ro. Submission Date for this Tender is 17-02-2021. Man Power Supply Tenders in As Per Tender Document Manipur. Bidders can get complete Tender details and download the document.
| Name of Work: <Vertical expansion of Gynae OT building for the accomodation of Senior Resident Doctor(SR)- 2 nos. (Male & Female), Junior Resident Doctor (JR)- 2 nos. (Male & Female), Nurse duty room, Attendant duty room, Technician duty room including washroom facilities, RIMS, Imphal.> | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead. | item1 | 0.36 | cum |
| 2 | 2 | Demolition above G.L. upto floor two level including disposal of unserviceable materials with 50 m lead and including cutting the necessary reinforcement and separating out from R.C.C./R.B. work. | item2 | ||
| 3 | 2.1 | R.C.C. work. | item3 | 3.77 | cum |
| 4 | 3 | Demolition above G.L.upto floor two level including disposal of unserviceable materials with 50 m lead. | item4 | ||
| 5 | 3.1 | Unreinforced cement concrete upto 15 cm. thickness. | item5 | 10.74 | cum |
| 6 | 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. up to floor five level excluding cost of centering,shuttering, finishing and reinforcement : | item7 | ||
| 7 | 4.1 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). | item8 | 7.3 | cum |
| 8 | 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering, finishing and reinforcement, with | item9 | ||
| 9 | 5.1 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). | item10 | 16.15 | cum |
| 10 | 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete | item11 | ||
| 11 | 6.1 | Thermo-Mechanically Treated bars | item12 | 3573.23 | kg |
| 12 | 7 | Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in : [Using 12 mm shuttering ply] | item13 | ||
| 13 | 7.1 | a) Columns, pillars, posts and struts (square, rectangular or polygon in plan). | item14 | 72.96 | sqm |
| 14 | 7.2 | b) Sides or soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels not exceeding 1m in depth. | item15 | 172.38 | sqm |
| 15 | 8 | Providing and laying damp-proof course 50 mm thick with cement concrete | item16 | ||
| 16 | 8.1 | 1:1.5:3(1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) | item17 | 214.83 | sqm |
| 17 | 9 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | item18 | 86.68 | kg |
| 18 | 10 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. | item19 | 86.68 | kg |
| 19 | 11 | 2nd class (local first class) brick work in foundation and plinth in c. m. 1 : 3 (1 cem : 3 fine sand). | item20 | 7.52 | cum |
| 20 | 12 | Extra for brick work in superstructure above 1st floor level | item21 | 7.52 | cum |
| 21 | 13 | Extra for brick work in square or rectangular pillars. | item22 | 7.52 | cum |
| 22 | 14 | Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure. | item23 | 370.6 | sqm |
| 23 | 15 | Extra for half brick masonry in superstructure above plinth (floor one level) to floor two level | item24 | 370.6 | sqm |
| 24 | 16 | Providing & fixing in position collapsible steel shutters with vertical channels 20mm X 10 mm X 2 mm & braced with flat iron diagonals 20 mm X 5 mm sizes with top & bottom rails of T iron 40 mm X 40 mm X 6 mm with 38 mm dia steel pulleys complete with bolts & nuts, locking arrangement, stoppers, handles i/c applying a priming coat of red lead paint. | item25 | 5.66 | sqm |
| 25 | 17 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. | item26 | ||
| 26 | 17.1 | Size of Tile 600x600 mm ( Double charged) | item27 | ||
| 27 | 17.2 | Branded | item28 | 166.29 | sqm |
| 28 | 18 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. | item29 | ||
| 29 | 18.1 | Size of Tile 600x600 mm ( Double charged) | item30 | ||
| 30 | 18.2 | Branded | item31 | 110.76 | sqm |
| 31 | 19 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide zinc chrome primer conforming to IS:2074-1979) welded and bolted including special shape washer etc. complete. | item32 | ||
| 32 | 19.1 | Electric resistant welded tube (Conforming to IS:1611-1979) | item33 | 3550.11 | kg |
| 33 | 20 | Trapzoidal Pre-painted Profile Sheet roofing of approved brand DYNA Roof or equivalent with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, exclding the coat of purlinsr & trusses. | item34 | ||
| 34 | 20.1 | Pre painted Galvanised Iron sheet (PPGL) | item35 | ||
| 35 | 20.2 | i) Profile sheet 0.60 mm/5.5 kgs/sqm | item36 | 323.7 | sqm |
| 36 | 21 | Trapzoidal Pre-painted Profile Sheet for Ridges Gutter or Valley 610 mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps completed, exclding the coat of purlins rafter & trusses. | item37 | ||
| 37 | 21.1 | Pre painted Galvanised Iron sheet (PPGL) | item38 | ||
| 38 | 21.2 | i) Profile sheet 0.60 mm/5.5 kgs/sqm | item39 | 88.32 | Rm |
| 39 | 22 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having | item40 | ||
| 40 | 22.1 | flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : | item41 | ||
| 41 | 22.2 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I | item42 | 166.29 | sqm |
| 42 | 23 | Providing and fixing aluminium works for doors windows, Ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up gaps at junctions, at top, bottom and side with required EPDM rubber/Neoprene gasket etc. Aluminium snap beading for glazing /panelling, C.P. brass/ Stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge.(Glazing and panelling to be paid for separately): | item43 | ||
| 43 | 23.1 | Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) | item44 | 867.83 | kg |
| 44 | 24 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade 1 Type II in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass/stainless steel screws etc. complete as par architectural drawing and directions of engineer-in-charge. | item45 | ||
| 45 | 24.1 | Pre-laminated particle board with decorative lamination on both | item46 | 16.2 | sqm |
| 46 | 25 | Poviding and fixing glazing in aluminium door, windows, ventilator shutters and partitions etc. with EPDM rudder/neoprene gasket etc. complete as per the architectural drawing and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item): | item47 | ||
| 47 | 25.1 | With float glass panes of 4mm thickness | item48 | 31.18 | sqm |
| 48 | 26 | Providing and fixing Aluminium sliding bolts bright finished or black enamelled with nuts & screws etc. complete. | item49 | ||
| 49 | 26.1 | i)250 x 16 mm | item50 | 13 | each |
| 50 | 27 | Providing & fixing Aluminium handles with necessary screws etc. complete. | item51 | ||
| 51 | 27.1 | i) 125 mm | item52 | 42 | each |
| 52 | 28 | Providing & fixing Aluminium Tower bolts (barrel type) with screws etc. complete. | item53 | ||
| 53 | 28.1 | i) 200 x 10 mm | item54 | 29 | each |
| 54 | 29 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. | item55 | ||
| 55 | 29.1 | Twin rubber stopper | item56 | 9 | each |
| 56 | 30 | 12 mm cement plaster 1:3 (1 cement: 3 fine sand) | item57 | 741.2 | sqm |
| 57 | 31 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. | item58 | 741.2 | sqm |
| 58 | 32 | Applying one coat of cement primer of approved quality on wall surface. | item59 | 741.2 | sqm |
| 59 | 33 | Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an even shade. | item60 | 370.6 | sqm |
| 60 | 34 | Finishing walls weather shield paint of approved quality on new work(three or more coats) to give even shade. | item61 | 207.81 | sqm |
| 61 | 35 | Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel work of approved quality in all shades on new steel work to give an even shade. | item62 | 5.66 | sqm |
| 62 | 36 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: | item63 | ||
| 63 | 36.1 | W.C. pan with ISI marked white solid plastic seat and lid | item64 | 6 | each |
| 64 | 37 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: | item65 | ||
| 65 | 37.1 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. | item66 | 6 | each |
| 66 | 38 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. | item67 | ||
| 67 | 38.1 | 32 mm dia | item68 | 6 | each |
| 68 | 39 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | item69 | 6 | each |
| 69 | 40 | Providing and fixing PVC traps with 100 mm inlet and 100 mm outlet of self cleaning design with screwed down of hinged grating with or without vent arm complete i/c cost of cutting and making good the walls and floors. | item70 | 12 | each |
| 70 | 41 | Providing and fixing grating of approved quality for Nahni trap. | item71 | ||
| 71 | 41.1 | Stainless Steel | item72 | 12 | each |
| 72 | 42 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | item73 | 6 | each |
| 73 | 43 | Providing and fixing 600 x120 x 5 mm glass shelf (Indian make) with C.P. brass brackets guard nail complete fixed to wooden cleats with C.P. brass screws. | item74 | 6 | each |
| 74 | 44 | Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws | item75 | 6 | each |
| 75 | 45 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer in-charge. | item76 | 6 | each |
| 76 | 46 | Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws. | item77 | 6 | each |
| 77 | 47 | P/F 110 mm PVC Soil vent pipe of approved quality i/c fitting the joints with rubber gasket and solvent cement etc. complete. | item78 | 65 | Rm |
| 78 | 48 | P/F 110 mm PVC door bent pipe of approved quality i/c fitting the joints with rubber gasket and solvent cement etc. complete. | item79 | 18 | each |
| 79 | 49 | P/F 110 mm PVC Tee with door pipe of approved quality i/c fitting the joints with rubber gasket and solvent cement etc. complete. | item80 | 12 | each |
| 80 | 50 | P/F MS holder bat clamp of approved design to 100mm HCI pipe socket i/c cost of cutting holes and making good the work etc. | item81 | 66 | each |
| 81 | 51 | Providinga dn fixing CP brass shower rose with 12.5 mm or 19mm inlet | item82 | ||
| 82 | 51.1 | 150mm diameter | item83 | 6 | each |
| 83 | 52 | Providing and fixing brass bib cock of approved quality | item84 | ||
| 84 | 52.1 | 25 mm diameter (Swan neck left/right HN Delux) | item85 | 12 | each |
| 85 | 53 | Providing and fixing brass stop cock of approved quality. | item86 | ||
| 86 | 53.1 | 20 mm diameter | item87 | 18 | each |
| 87 | 54 | Providing and fixing lead connection pipe with brass unions. | item88 | ||
| 88 | 54.1 | 20 mm diameter | item89 | 12 | each |
| 89 | 55 | Providing and fixing 8mm dia CP/SS hand faucet with flexible tube upto 1m long with two way angle cum bib cock valve of approved quality and make as approved by the engineer-in-charge. | item90 | 6 | each |
| 90 | 56 | Providing and fixing Water Storage Tanks with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. | item91 | ||
| 91 | 56.1 | 1000 litres net capacity storage tanks | item92 | 2 | each |
| 92 | 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. | item93 | ||
| 93 | 57.1 | Concealed work, including cutting chases and making good the walls etc. | item94 | ||
| 94 | 57.2 | 20 mm nominal outer dia Pipes | item95 | 27 | Rm |
| 95 | 58 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. | item96 | ||
| 96 | 58.1 | 40 mm nominal outer dia Pipes | item97 | 56.2 | Rm |
| 97 | 59 | Providing and fixing brass full way G.M valve with CI wheel of approved quality. | item98 | ||
| 98 | 59.1 | 40 mm nominal outer dia Pipes | item99 | 2 | each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
