Repair And Renovation Works ( Ap1 , Ap2 , Ap3 At Hrs , Yercaud ) , Salem District As Per Boq
Tender Value
30.64 Lakhs
Estimated cost
Bid Submission
22 Feb 2021
0 days left
EMD
27200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
YERCAUD → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation Works ( Ap1 , Ap2 , Ap3 At Hrs , Yercaud ) , Salem District As Per Boq
BOQ
| Name of Work: REPAIR AND RENOVATION WORKS AP1,AP2,AP3 AT HRS, YERCAUD | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling the following works and carefully stacking the useful materials in the departmental store and clearing debris away from the site etc., Complete as directed by the departmental officers. | Special-1 | ||
| 2 | 1.01 | AC Sheet roofing without roof timbers | 384 | m2 | |
| 3 | 1.02 | wrought and put up framed timbers in roof / floors | 8 | m3 | |
| 4 | 1.03 | Doors and windows including removal of frames, hinges and fastenings | 29 | m2 | |
| 5 | 1.04 | chipping of concrete and roughening the surface | 207 | m2 | |
| 6 | 1.05 | Brick / Stone masonry in Cement mortar walls under 3m high | 4 | m3 | |
| 7 | 1.06 | Thermacol false ceiling | 117 | m2 | |
| 8 | 1.07 | Removal of EWC/IWC | 3 | Nos | |
| 9 | 2 | EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc., Complete complying with standard specifications and as directed by the departmental officers. | Sec. III Spn. 20 A - 2 | 86 | m3 |
| 10 | 3 | Supplying and filling in foundation, basement and trenches with FILLING M.SAND in layers of not more than 15cm thick, well watered, rammed and consolidated etc., Complete complying with standard specification and as directed by the departmental officers. | Sec. III Spn 24 & 25 - 3 | 26 | m3 |
| 11 | 4 | PLAIN CEMENT CONCRETE 1:5:10 (One cement, five M.sand and ten aggregate) using 40mm gauge hand broken hard granite stone jelly for FOUNDATION and flooring including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification and as directed by the departmental officers | Sec. IV Spn. 28 Vol. I P.No.79 - 4 | 26 | m3 |
| 12 | 5 | REINFORCED CEMENT CONCRETE 1:2:4 (One cement two M.sand and four aggregate) using machine crushed 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding centering, strutting, cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams etc., Complete complying with standard specification and as directed by the departmental officers. | Sec. IV Spn. 30 Vol. I P.No.378 - 5 | ||
| 13 | 5.01 | For Foundation and Basement | 5 | m3 | |
| 14 | 5.02 | For superstructure in Ground floor | 44 | m3 | |
| 15 | 6 | Supplying, fabricating and placing in position mild steel/Ribbed tor steel rods for all RCC works including cutting, bending to required shape and placing in position, and including cost of steel and binding wire and all labour charges, conveyance etc. in all floors complete complying with standard specification and as directed by the departmental officers. | Sec XIV Spn 86 & 86A - 6 | 4900 | Kgs |
| 16 | 7 | Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOCKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over countrywood joists of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete complying with standard specification and as directed by the departmental officers. | Sec XIV Spn 86 & 86A - 7 | ||
| 17 | 7.01 | Slab, Beam & Lintel | 340 | m2 | |
| 18 | 8 | BRICK WORK in cement mortar 1:5 (One cement and Five M.sand) using second class chamber burnt bricks of size 23x11x7cm size 9\" x 43/8\" x 23/4\" for the including curing etc., complete complying with standard specification and as directed by the departmental officers. (Masonry projections whereever necessary for obtaining required elevation shall be done without extra cost.) | Sec. V Spn. 31 & 31C Vol. I P.No.269, 270 - 8 | ||
| 19 | 8.01 | For Foundation and Basement | 17 | m3 | |
| 20 | 8.02 | For superstructure in Ground floor | 7 | m3 | |
| 21 | 9 | BRICK WORK in cement mortar 1:3 (One cement and Three M.sand) using second class chamber burnt bricks of size 9\" x 43/8\" x 23/4\" for the partition walls using hoop iron reinforcement at every fourth course (once in three layers) including cost of rod, curing etc., complete complying with standard specifications and as directed by the departmental officers. | Sec. V Spn. 31 & 31C Vol. I P.No.269, 270 - 9 | ||
| 22 | 9.01 | Ground floor | 23 | m2 | |
| 23 | 10 | SPECIAL CEILING PLASTERING and finishing all the RCC exposed surfaces such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc. with cement mortar 1:3 (one cement and three P.sand) 10mm thick, including hacking the surfaces including curing neat finishing etc., complete complying with standard specification and as directed by the departmental officers | Sec.IX Spn. 56,57 Vol. I P.No.405 - 10 | 326 | m2 |
| 24 | 11 | PLASTERING with cement mortar 1:5 (one cement five P.sand) 12 mm., thick for walls in all floors including necessary scaffolding, curing, neat finishing etc., complete complying with standard specifications and as directed by the departmental officers | Sec.IX Spn. 56,57 Vol. I P.No.405 - 11 | 216 | m2 |
| 25 | 12 | Plastering with cement mortar 1:3 (one cement three P.sand) 12 mm., thick in all floors including water proofing compound necessary scaffolding, curing, neat finishing etc., Complete complying with standard specifications and as directed by the departmental officers | Sec.IX Spn. 56,57 Vol. I P.No.405 - 12 | 95 | m2 |
| 26 | 13 | Manufacturing, Supplying and fixing in position STEEL GRILLS Square bars 12mm is welded to the inner face not exceeding 10cm spacing, All the members of the Grils shall be painted one coat with red oxide primer. The rate shall be inclusive of cost of all materials, labour charges including cost of welding electrodes, transportation to site of work loading, unloading and all other charges etc., Complete complying with standard specifications and as directed by the departmental officers. | Sec. IV Spn. 86A Vol. II P.No.163-13 | 130 | Kgs. |
| 27 | 14 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) windows of casement type (Open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames etc. Complete as directed by the departmental officers. (The window should be got approved from the Executive Engineer before use on work.) | Special - 14 | 9 | m2 |
| 28 | 15 | Supply and fixing of Solid PVC door shutters using 19 Gauge 19 mm MS square tubes for style & outer frames 15 mm MS square tubes for top, lock & bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC Sheets. Shutter using 5 mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The overall size fo styles shall be 50 mm x 50 mm. The over all size of top rail lock rail and bottom rail shall be 75 mm x 30 mm. The over all size of frames shall be 50 mm x 45 mm with suitable rabate for housing the shutter. etc.,Complete complying with the standard specification and as directed by the departmental officers.(with frame) | Sec. XI Spn. 74 Vol. II P.No.7 - 15 | 7 | m2 |
| 29 | 16 | labour charge for removing, repairing and refixing the Joineries in position including necessary cutting, jointing, fixing of hinges, cost of nails, screws and any other accessories necessary for fixing in position etc., Complete complying with standard specifications and as directed by the departmental officers. | Sec.IX Spn. 56,57 Vol. I P.No.405 -16 | 29 | m2 |
| 30 | 17 | Flooring with scratch proof premium grade Double charged VITRIFIED TILES of approved quality and colour of size 0.60 x 0.60 x 0.008 m in all floors over 20mm thick cement mortar 1:3 (One cement and three M.sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments etc.,Complete complying with the standard specification and as directed by the departmental officers. | Sec. VII Spn. 39A Vol.II P.No. 341-17 | 217 | m2 |
| 31 | 18 | FLOORING with scratch proof designed CERAMIC TILES of premium quality and colour of size 305x305x6mm in all floors over 20mm thick cement mortar 1:3 (one cement and three M.sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments at 3.00 kg/m2 etc., Complete complying with standard specification and as directed by the departmental officer. (C.E.(B) letter No. HDO/(1)/42336/2002/ dt. 2.12.2002.) | Sec. VII Spn. 39A Vol.II P.No. 341 - 18 | 16 | m2 |
| 32 | 19 | DADOOING THE WALLS with Designed GLAZED TILES of SIZE 300 x 200 x 6mm of best approved quality like Johnson or equivalent make laid in cement mortar 1:2 (One cement and two P.sand) and pointing with the same white cement neatly to full depth of tiles in all floors etc.,Complete complying with standard specification and as directed by the departmental officers.(The colour of the tiles should be got approved by the Departmental officers before execution). | 41 B Generaly - 19 | 60 | m2 |
| 33 | 20 | Supplying and fixing in position best white glazed earthenware Oriya type INDIAN WATER CLOSET of approved quality of size 580mm x 440 mm with 'P' or 'S' trap and embedding the closet with trap to shape in position with 40mm brick jelly concrete 1:2:5 (One lime, two M.Sand and five brick jelly) and finishing the top to the required slope and including giving connection to the C.I. soil stracks by dismantling the masonry floor or RCC works and redoing the same to the original condition without any leakage etc., complete complying with the standard specification and as directed by the departmental officers. ( The water closet should be got approved by the Executive Engineer before use on work) | Sec. XVI Spn. 102 Vol. II P.No.212 - 20 | 3 | Nos |
| 34 | 21 | Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of with out pedestal of 550 X 400 mm with a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waste water pipe, 32mm dia C.P. Brass waste coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with I.S.I. mark and necessary G.I. Union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage etc., Complete complying with standard specification and as directed by the departmental officers. (The wash hand basin should be got approved by the Executive Engineer before use on work.) | Sec. XVI Spn. 102 Vol. II P.No.212 - 21 | 3 | Nos |
| 35 | 22 | Supplying and fixing of best quality indian CUDDAPAH SLAB SINK of size 600mm X 600 mm x 200 mm with 32mm dia 'B' class G.I Waste water pipe & 32 mm dia 'B' Class G.I Waste water pipe & 32 mm dia C.P. waste coupling with I.S.I. mark and necessary G.I. Union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., Complete without any leakage complying with standard specification. | Special -22 | 3 | Nos |
| 36 | 23 | Finishing the top of roof with one course of PRESSED TILES of size 23cm x 23cm x 2cm of approved quality laid in cement mortar 1:3 (One cement and three M.sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight of cement used and the top pointed with same mortar mixed with red oxide to the full depth of tiles etc., complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of red oxide and water proofing compound) | Sec. VIII Spn. 44 I Vol.I P.No. 375 - 23 | 320 | m2 |
| 37 | 24 | Supplying laying and jointing various diameter of PVC PIPES (Like Finolex or equivalent) and best variety conforming to I.S.S. and with I.S.I. mark including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall by concealing them including chipping and making holes on the walls or drilling holes in the roof and making good the dismantled portions to original condition including cost of special clamp with screws nails teak wood plugs and any other accssories necessary for fixing in position etc., Complete complying with the standard specification and as directed by the departmental officers. | Sec. XVI Spn. 98 Vol. II P.No.201 - 24 | ||
| 38 | 24.01 | 4\" dia PVC Pipe (6Kg/cm2) for sanitary arrangements | 45 | Rm | |
| 39 | 24.02 | 21/2\" dia PVC Pipe (6Kg/cm2) for sanitary (75MM) | 45 | Rm | |
| 40 | 25 | Supplying laying and jointing of UPVC Pipes of approved quality and best variety conforming to ISS and with ISI Mark of various diameter including cutting,threading and fixing of UPVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, pvc clamps and screws making the good the dismantled portion to original condition with necessary brick work and plastering wherever necessary scaffolding charges etc.,Complete complying with the standard specification and as directed by the departmental officers. ( EXTERNAL WATER SUPPLY ABOVE GL USING UPVC PIPES ) | Sec. XVI Spn. 98 Vol. II P.No.201 - 25 | ||
| 41 | 25.01 | 1\" dia UPVC Pipe | 24 | Rm | |
| 42 | 25.02 | 11/4\" dia UPVC Pipe | 75 | Rm | |
| 43 | 26 | Supplying of UPVC/PVC specials of various diameter of best and approved brand and ISI make etc., complete complying with standaed spcification and as directed by the departmental officers. | Special - 26 | ||
| 44 | 26.01 | 110 mm PVC Elbow | 6 | Nos. | |
| 45 | 26.02 | 110 mm PVC Door Elbow | 4 | Nos. | |
| 46 | 26.03 | 110 mm PVC Vent Cowl | 4 | Nos. | |
| 47 | 26.04 | 110 mm PVC Tee | 8 | Nos. | |
| 48 | 26.05 | 25 mm UPVC Elbow | 8 | Nos. | |
| 49 | 26.06 | 25 mm UPVC Tee | 8 | Nos. | |
| 50 | 26.07 | 25 mm UPVC Union | 4 | Nos. | |
| 51 | 27 | Supplying and fixing of brass chromium plated SCREW DOWN TAP of approved make conforming to I.S.I. specification and quality including cost of shellac, thread, including cutting and threading wherever necessary etc., Complete complying with the standard specification and as directed by the departmental officers.(Screw down taps are to be got approved by the Department officer before use on work.) | Sec. XVI Spn. 102 Vol. II P.No.212- 27 | 12 | Nos. |
| 52 | 28 | Supplying and fixing in position PVC Nahini traps of sizes 110 x 75 with best PVC gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( one part of lime two parts of sand and five parts of 40 mm size broken jelly) and finished with cement mortar 1:3 ( one cement and three M.sand) including dismantling masonry works wherever found necessary and making good the damaged portions to the original condition and giving connection to the cast iron pipe etc., Complete complying with standard specification and as directed by the departmental officers . | Sec. XVI Spn. 102 Vol. II P.No.212 - 28 | 3 | Nos |
| 53 | 29 | Supplying and fixing in position first quality and approved variety of G.M.GATE VALVE / Wheel Valve (Heavy Duty) of VARIOUS dia conforming to I.S.I. Specification including necessary cutting and threading of G.I. pipes complying with standard specification for both internal and external water supply arrangements and as directed by the departmental officers. (Gate valves should be got approved by the Executive Engineer before use on work.) | Sec. XVI Spn. 102 Vol. II P.No.212 - 29 | ||
| 54 | 29.01 | 11/4\" G.M Gate Valve | 5 | Nos. | |
| 55 | 30 | Supplying and fixing of CUDDAPAH SLABS of 38mm to 40mm thick of best and approved quality for the flooring / working plat form in C.M. 1:3 mix and pointing the same. Complete complying with standard specification and as directed by the departmental officers. | Special -30 | 33 | m2 |
| 56 | 31 | Paving the floor with best approved quality fine polished Granite stone Slabs of size 1200 x 600 of 18 / 20 mm thick of Jet Black with machine cut edges laid over a cement mortar bed of 20 mm thick using cement mortar 1:3 (One Cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., (The Granite stone slabs and other materials to be used shall be got approved by the departmental officersconcerned before use on work etc., (Including nosing etc., complete and as directed by the departmental officers. | Special - 31 | 4 | m2 |
| 57 | 32 | WHITE WASHING ONE COAT using best quality (KOTTAYAM) White cement in floors including cost of white cement and other materials, brushes, scaffolding charges etc., complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of cost of gum, best quality of blue powder etc.,). | Sec. IX Spn. 63 Vol.I P.No. 406 - 32 | 1482 | m2 |
| 58 | 33 | PAINTING the plastered surface using TWO COAT of Oil Bound Distemper (OBD) / Acrylic Bound Distemper (ABD) as per the specification of the approved colour to give an even shade at the internal walls including cost of brushes and all other materials required and the scaffolding charges. (The paint to be used should be got approved by the Departmental officer before use on work). | Sec. IX Spn. 65 Sec. X 66A Vol.I P.No. 406, 424-33 | 1235 | m2 |
| 59 | 34 | PAINTING the wall surface using best quality of TWO COAT of Exterior Emulsion Paint of the approved colour and quality as per the specification to give an even shade at the external walls with necessary scrapping including cost of brushes and all other materials required and the scaffolding charges.(The paint to be used should be got approved by the Executive Engineer before us on work). Complete and as directed by the departmental Officers. | Special - 34 | 226 | m2 |
AI Tender Summary
Tender Timeline
Feb 08, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 22, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 25, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender