Construction Of Office Building For Division Office Barnala At Water Works Site Jcc Side In District Administrative Complex Barnala In Punjab Construction Of Building , Providing Public Health Services I . E . Internal Water Supply , Estate Water Suppl, Water Works Site At Jcc Barnala-Punjab

TDR : 26884830

Tender Notice
BOQ

Expired

Water Works Site At Jcc Barnala , Punjab

Tender Brief : Construction Of Office Building For Division Office Barnala At Water Works Site Jcc Side In District Administrative Complex Barnala In Punjab Construction Of Building , Providing Public Health Services I . E . Internal Water Supply , Estate Water Suppl

Document Fees
₹ 1 /-

EMD
₹ 156000.0 /-

Tender Value
₹ 77.88 Lakhs /-

Submission Date
08-03-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: CONSTRUCTION OF OFFICE BUILDING FOR DIVISION OFFICE BARNALA (AT WATER WORKS SITE KHUDDI KALAN) DISTT. BARNALA, PUNJAB. Construction of Building, Internal Roads, Parking, Foot Paths, Providing Public Health Services i.e. Internal Water Supply, Estate Water Supply, Estate Sewerage , Providing and Installing Fire Fighting Equipments, Electrical Services, i.e Internal Installation, Data Cabling and Coumpter Networking , EPABX System, Diesel Generator Set, etc complete in all respects & all other works contingent there to as per approved BID Document.
1	1	Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm layers with compaction including disposal of all surplus soil as directed within a lead of 30 meters. \n	Iteam1	279.54	Cum
2	2	Cement concrete 1:5:10
3	3	with stone aggregate 40 mm gauge
4	4	Cement concrete 1:5:10 with 40 mm stone ballast using concrete mixing volumetric type	Iteam2	34.43	Cum
5	5	Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.	Iteam3	9.5	Cum
6	6	Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mxier as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in super structure.	Iteam4	60.05	Cum
7	7	Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)	Iteam5	65.9	Sqm.
8	8	Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.	Iteam6	374.97	Sqm.
9	9	Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels	Iteam7	120.08	Sqm.
10	10	First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.	Iteam8	157.95	Cum
11	11	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.	Iteam9	155.32	Cum
12	12	Extra rate for First Floor	Iteam10	20.55	Cum
13	13	115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1 :4 cement sand mortar in super structure	Iteam11	62.65	Sqm.
14	14	12.50 mm Cement Plaster 1:5 on walls	Iteam12	309.22	Sqm.
15	15	20 mm thick Cement Plaster 1:5 in two coats work.	Iteam13	309.22	Sqm.
16	16	12.5 mm thick cement plaster 1:4	Iteam14	304	Sqm.
17	17	20 mm thick Cement Plaster 1:4 in two coat work.	Iteam15	304	Sqm.
18	18	Bearing Plaster of 10 mm thick cement mortar 1:3 cement sand finished with a floating coat of neat cement and thick coat of Lime wash / P.O.P. on top of walls when dry for bearing of R.C.C. slabs & beams.	Iteam16	45.43	Sqm.
19	19	Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge.	Iteam17	38.1	Rmt.
20	20	Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
21	21	UPVC 110 mm bend	Iteam18	10	Nos.
22	22	Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
23	23	UPVC 110 mm bend	Iteam19	21	Nos.
24	24	Providing and fixing in position M.S. or heavy flat iron clamps made out of M.S. flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyphonage pipes to walls complete in all respects. Including cutting and making good the walls and floor etc. and painting.
25	25	M.S. Holder Bats clamps 100 mm i/d H.C.I. pipesl	Iteam20	21	Nos.
26	26	Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.	Iteam21	10	Nos.
27	27	Providing and fixing in position gratings 150 mm x 150 mm on top Khura PVC grating.	Iteam22	10	Nos.
28	28	Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3	Iteam23	10	Nos.
29	29	Terracing consisting of tiles 22.86 x 11.43 x 3.83 cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of CC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.	Iteam24	366.36	Sqm.
30	30	Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.	Iteam25	87.63	Rmt.
31	31	Earth filling with good quality earth obtained from outside the plinth including compensation of earth, loading, unloading, carriage from outside the premises to site of work, spreading, laying watering compacting with rammer complete as per specifications.	Iteam26	362.83	Cum
32	32	Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar up to 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead up to 30 metres	Iteam27	106.45	Cum
33	33	Base course of floor consisting of 100 mm thick cement concrete 1:8:16 with stone aggreate and 100 mm sand filling.(using mechanical mixer for mixing of material)	Iteam28	318.82	Sqm.
34	34	Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :	Iteam29	38.88	Sqm.
35	35	Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing.	Iteam30	7.92	Sqm.
36	36	Providing and fixing Morwad Marble Strip 12mm to 15mm thick and 100 mm wide in kotah stone flooring over 12.50mm thickness base of cement mortar 1:3 jointed with cement slurry including cost of additional mortar equivalent to the kota stone thickness andcolouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects..	Iteam31	42.56	Rmt
37	37	Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / hickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)\na) size 600 x 600 mm	Iteam32	270.69	Sqm.
38	38	Providing and Laying Out Door Precast Designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement :3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge.	Iteam33	7.52	Sqm.
39	39	Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges onforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished,fixed in position including the cost of cementconcrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge.
40	40	Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.	Iteam34	85.63	Rmt.
41	41	Doors and windows frame of size 161mm x 60mm with 40 mm wide double rebate weighing 4.05 kg per meter.	Iteam35	41.87	Rmt.
42	42	Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.	Iteam36	263.79	Rmt.
43	43	Deodar wood doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position
44	44	Panelled, glazed or glazed and panelled.\n35mm thick	Iteam37	130.15	Sqm.
45	45	Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.	Iteam38	12.52	Qtl.
46	46	Providing Polyster Powder coating 60 to 70 micron any coloured specrified to M.S Grill section of various sizes including carrriage of material from marktet to workshop ..	Iteam39	1251.57	Kg.
47	47	Providing and fixing 16 gauge stainless steel pipe of various sizes railing of grade 304 duly fixed on ramp with the help of bolts grouted on floor with hand rail and newel post of 50 mm dia stainless steel pipe, balusters of 40 mm dia stainless steel pipe complete in all respect as per specification and entire satisfaction of Engineer-in-Charge. (Railing on Entrance Ramp Design as per guidelines issued for persons with disability)	Iteam40	14.63	Rft.
48	48	Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35 mm thick
49	49	35 mm thick	Iteam41	34.18	Sqm.
50	50	Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)	Iteam42	34.18	Sqm.
51	51	Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300 mm x 16 mm	Iteam43	21	Nos.
52	52	Providing and fixing 0.50 mm thick aluminium sheet including cost of necessary fittings i.e. screws, etc. complete	Iteam44	2.9	Sqm.
53	53	Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete - I.S.I Designation No. III (size of door 851 mm to 1000 mm)	Iteam45	2	Nos.
54	54	Providing and fixing 12mm thick 150mm wide pelmets with 25mm dia Aluminium rod and brackets including fixing with 25mmx3mm MS Flat 10cm long and PVC Plug etc complete Deodar Wood	Iteam46	34.98	Rmt.
55	55	Providing and fixing mineral fibre false ceiling tiles (NRC 0.55 to 0.6) at all heights of size 595X595x16 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k= 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.	Iteam47	26.99	Sqm.
56	56	Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2006, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete	Iteam48	58.85	Qtl
57	57	Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge.	Iteam49	314.93	sqm
58	58	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish	Iteam50	1541.34	sqm
59	59	Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface	Iteam51	933.34	sqm
60	60	Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)	Iteam52	933.34	sqm
61	61	Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.	Iteam53	68.36	sqm
62	62	Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.	Iteam54	68.36	sqm
63	63	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.	Iteam55	68.36	sqm
64	64	Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied\n@ 2.20 Kg/10 Sqm	Iteam56	608	sqm
65	65	Construction of Plinth Protection complete as per drawing
66	66	Cement Concrete 1:8:16
67	67	With stone aggregates 40mm gauge
68	68	mixing by mechanical means using concrete mixer volumetric type	Iteam57	2.68	Cum
69	69	First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.	Iteam58	12.88	Cum
70	70	Base course of floor consisting of 100 mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material	Iteam59	42.29	Sqm.
71	71	Conglomerate floor 40 mm thick cement concrete topping 1:2:4 (using mechanical mixer for mixing of material).	Iteam60	63.44	Sqm.
72	72	12.5 mm thick cement plaster 1:5 complete in all respect as per specification, drawing and to the entire satisfaction of Engineer-in-charge.	Iteam61	28.2	Sqm.
73	73	Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of\njointing.
74	74	Single Socket Type B
75	75	Qty. as per Table attached
76	76	110 mm o/d SWR UPVC pipe line laid complete	Iteam62	21.33	Mtr.
77	77	90 mm o/d SWR UPVC pipe line laid complete	Iteam63	18.29	Mtr.
78	78	Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
79	79	For 110 mm o/d pipes
80	80	Elbow 90 Degree (All side socketed)	Iteam64	4	Nos.
81	81	Coupler	Iteam65	5	Nos.
82	82	For 75 mm o/d pipes
83	83	Elbow 90 Degree (All side socketed)	Iteam66	5	Nos.
84	84	Coupler	Iteam67	5	Nos.
85	85	P Trap/Floor Trap 75mm x 75mm	Iteam68	8	Nos.
86	86	Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150 mm x 150 mm , cover and frame clear opening 300 mm x 300 mm and out of side size 330 mm x 330 mm and chamber including cost of all bricks work in cement mortar 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50 mm.
87	87	100 mm internal Diameter S.W. Gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300 mm x 300 mm and out of side size 330 mm x 330 mm	Iteam69	3	Nos.
88	88	Construction of brick masonry inspectionchambers size as given below upto 0.60 etre average depth in 1:5 cement sandmortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
89	89	Size 450 mm x 450 mm inside with RCC 455 mm x 455 mm cover and frame light duty double seal	Iteam70	6	Nos.
90	90	Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete.
91	91	uPVC Pipe 6 Kgf/cm2 - 50 mm i/d	Iteam71	7.62	Mtr.
92	92	INTERNAL WATER SUPPLY SYSTEM
93	93	Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.), painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.
94	94	15 mm i/d	Iteam72	20	Mtr.
95	95	20 mm i/d	Iteam73	20	Mtr.
96	96	25 mm i/d	Iteam74	15	Mtr.
97	97	40 mm i/d	Iteam75	30	Mtr.
98	98	Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. \nSize 75 mm x 75 mm	Iteam76	60	Mtr.
99	99	Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required.
100	100	Through wall 11.43 cm thick	Iteam77	5	Nos.
101	101	Through wall 22.86 cm thick	Iteam78	10	Nos.
102	102	Providing, fixing and jointing G.I Union Couplings (of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
103	103	15 mm i/d G.I. Union	Iteam79	4	Nos.
104	104	20 mm i/d G.I. Union	Iteam80	4	Nos.
105	105	25 mm i/d G.I. Union	Iteam81	4	Nos.
106	106	40 mm i/d G.I. Union	Iteam82	4	Nos.
107	107	Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
108	108	25 mm i/d Brass Ball valves	Iteam83	2	Nos.
109	109	40 mm i/d Brass Ball valves	Iteam84	2	Nos.
110	110	Sanitary Installation
111	111	Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.	Iteam85	1	No.
112	112	Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.	Iteam86	3	Nos.
113	113	Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
114	114	Chinaware wall mounted E.W.C without cistern including seat cover complete in all respect.	Iteam87	1	No.
115	115	Providing and fixing in position Metro pole flush valve 32 mm size dual flow (Concealed body) with exposed shut off provision and round plate complete in all respect.	Iteam88	1	No.
116	116	Providing and fixing jet spray with 2'-6\" long PVC pipe with PTMT nut	Iteam89	4	Nos.
117	117	Providing & Fixing in position C.P. Brass Hexa Nipple 15 mm of approved make (to the approval of Engineer-in-charge) complete in all respect.	Iteam90	4	Nos.
118	118	Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.	Iteam91	3	No.
119	119	Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32 mm dia with one C.P. brass pillar tap complete in all respect.
120	120	Size 550 mm x 400 mm x 815 mm	Iteam92	2	Nos.
121	121	Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
122	122	Vitreous chinaware standard white pedestal for wash hand basin.	Iteam93	1	Nos.
123	123	Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.	Iteam94	4	Nos.
124	124	Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.
125	125	Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm	Iteam95	1	No.
126	126	Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
127	127	PVC tube connection of size 15 mm x 375 mm with PTMT nut	Iteam96	7	Nos.
128	128	Providing and fixing PVC waste pipe 32 mm i/d of approved make (to the approval of Engineer-in-charge) complete in all respect.	Iteam97	7	Nos.
129	129	Providing and fixing in position C.P. brass, bottle trap 32 mm dia with 40 mm seal of approved make (to the approval of Engineer-in-charge) complete in all respect.
130	130	For Wash Basin & Urinal	Iteam98	1	Nos.
131	131	Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect.	Iteam99	5	No.
132	132	Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs embedded in walls with brass screws complete in all respect -
133	133	C.P. brass towel Rails size 15 mm dia 610 mm long	Iteam100	1	No.
134	134	Providing & Fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect.
135	135	C.P. brass Bib cock long nose/ long body foam flow without flange	Iteam101	1	Nos.
136	136	C.P. brass Bib cock without flange	Iteam102	4	Nos.
137	137	Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.
138	138	Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.	Iteam103	11	Nos.
139	139	C.P. Brass 15 mm Angle valve without flange	Iteam104	13	Nos.
140	140	C.P. Brass 15 mm Concealed stop cock with flange.	Iteam105	32	Nos.
141	141	Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)
142	142	Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect.	Iteam106	32	Nos.
143	143	Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)
144	144	Size 600mmx450mm	Iteam107	4	Nos.
145	145	Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge) complete in all respect. (Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge.)
146	146	C.P. brass Bib cock with wall flange	Iteam108	2	Nos.
147	147	C.P. Brass 15 mm Angular stop cock with Wall flange	Iteam109	1	Nos.
148	148	C.P. brass 15mm Concealed stop cock with adjustable wall flange with seal.(Outer +Inner Body)	Iteam110	2	Nos.
149	149	C.P. brass 3-Hole Basin Mixer Without Popup Waste System	Iteam111	1	No.
150	150	Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge) complete in all respect. (Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge.)
151	151	C.P. brass toilet roll holder with flap	Iteam112	5	Nos.
152	152	C.P. brass soap dish holder with glass dish	Iteam113	1	No.
153	153	C.P. Glass Shelf 600mm long	Iteam114	1	No.
154	154	C.P. brass towel rack 600mm long with lower hangers	Iteam115	1	No.
155	155	Providing & Fixing in position C.P./ Aluminium Khunti of approved make (to the approval of Engineer-in-charge) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect -
156	156	C.P. Brass khunti with 3 pegs	Iteam116	5	Nos.
157	157	Providing and fixing in position vitreous Chinaware white channel of approved make (to the approval of Engineer-in-charge) of size 600 mm x 100 mm including laying and fixing in cement concrete 1:2:4 complete in all respect.	Iteam117	6	No.
158	158	Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank - Double Layer Tanks	Iteam118	3000	Litres
159	159	Providing and fixing in position automatic brass Ball Cock in tanks.
160	160	Brass Ball Cock with rod and Plastic Ball.25 mm i/d	Iteam119	2	Nos.
161	161	Brass Ball Cock with rod and Plastic Ball.32 mm i/d	Iteam120	1	No.
162	162	Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
163	163	G.I. tank nipple 25 mm i/d	Iteam121	3	Nos.
164	164	Construction of Platform for placing PVC Water Storage Tank with Brick Ballast Work, Plaster, CC 1:8:16, CC 1:2:4, cement rendering etc. of required size complete in all respect.	Iteam122	2	Nos.
165	165	Flooring and Wall Tiles
166	166	Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete .	Iteam123	22.82	Sqm.
167	167	Providing and fixing 1st quality ceramic glazed wall tiles att/SemiMatt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 mm & 300x300mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.	Iteam124	86.19	Sqm.
168	168	Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.	Iteam125	2.93	Sqm.
169	169	ESTATE WATER SUPPLY
170	170	Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including tri mm ing and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead up to 15 meter complete in all respect.
171	171	Earth work up to 1.5 m. Depth for
172	172	All classes of soil except rocky	Iteam126	7.2	Cum.
173	173	Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class, premium make such as (Jindal Hisar) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.
174	174	50 mm i/d	Iteam127	20	Mtr.
175	175	Cement Concrete 1:6:12
176	176	With stone aggregate 40mm gauge
177	177	mixing by mechanical means using concrete mixer volumetric type	Iteam128	8.75	Cum.
178	178	Providing, fixing and jointing G.I Union Couplings (of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
179	179	50 mm i/d G.I. Union	Iteam129	2	Nos.
180	180	Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
181	181	50 mm i/d Gun Metal peet valve heavy pattern.	Iteam130	2	Nos.
182	182	Providing ISI Marked G.M ferrule as per IS:2692, drilling and tapping cast iron pipe lines of all diameters and screwing in Ferrule and connections complete in all respect.
183	183	25 mm i/d Ferrule heavy duty	Iteam131	1	No.
184	184	SHIFTING OF MS/PVC PIPELINE FOR CONSTRUCTION OF OFFICE BUILDING
185	185	Providing, Stringing out PVC pipes ISI Marked as per ISI-4985 (ISI marked with the prior approval Engineer-in-charge) casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing, including excavation complete including excavation as per specifications 100 mm o/d PVC pipe of 10kg/sqm2
186	186	110 mm o/d PVC Pipe 10 kg/sqm2	Iteam132	40	mtr
187	187	Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS\nPipe conforming to Indian Standard IS :\n1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts.
188	188	150mm internal diameter (2 No. Pipes 50 +50 mtr )	Iteam133	100	mtr
189	189	Les Credit of Old PVC & MS Pipe (Lum Sum)	Iteam134	1	LS
190	190	ESTATE SEWERAGE
191	191	Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
192	192	110 mm o/d pipes	Iteam135	81	Mtr.
193	193	Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, tri mm ing sides and side slopes for sewers and manholes to full depths as shown in drawings, including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ra mm ing and restoration of surface to original level and removal of surplus spoil from the site of works, up to one chain (15 m) complete in all respects.
194	194	For depth exceeding 3.0 m but not exceeding 4.5 m B.G.L.	Iteam136	98.75	Cum.
195	195	Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:2 (1 cement : 2 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete.
196	196	With Existing Sewer of 100+250 mm id and below	Iteam137	1	Nos.
197	197	FIRE FIGHTING EQUIPMENT
198	198	Providing and fixing of FIRE EXTINGUISHER, CO2 type as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect.
199	199	4.5 Kg. Capacity	Iteam138	2	Nos.
200	200	Providing and fixing of FIRE EXTINGUISHER, ABC Powder type (stored pressure) as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect.
201	201	6 Kg. Capacity	Iteam139	2	Nos.
202	202	INTERNAL ELECTRICAL INSTALLATIONS
203	203	RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:
204	204	Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid inheavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\" deep for walls and CI 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
205	205	Wiring fan point (With fan box)	Iteam140	30	Nos.
206	206	Wiring light point	Iteam141	74	Nos.
207	207	Wiring 6Amp. wall socket point	Iteam142	19	Nos.
208	208	Wiring 6Amp. Plug control comprising wall socket point	Iteam143	10	Nos.
209	209	Wiring 16/20Amp. power plug control point	Iteam144	10	Nos.
210	210	Wiring call-bell point	Iteam145	9	Nos.
211	211	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:\nSupply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-\n
212	212	Heavy Gauge PVC Conduit Pipe 20mm dia. (Flushed)	Iteam146	100	Nos.
213	213	Heavy Gauge PVC Conduit Pipe 25mm dia.(Flushed)	Iteam147	100	Nos.
214	214	Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed)	Iteam148	25	Nos.
215	215	Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-\nPVC Flexible Pipe 40mm dia.	Iteam149	10	Nos.
216	216	HEAVY GUAGE WELDED CONDUIT PIPES:\nSupply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-\nHGW Conduit Pipe 20mm dia. (1.6mm thick) Flushed	Iteam150	30	Mtr.
217	217	PVC INSULATED SINGLE CORE FRLS COPPER CONDUCTOR CABLE:
218	218	Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
219	219	Overall size 1.5sq.mm (Un-sheathed)	Iteam151	400	Mtr.
220	220	Overall size 2.5sq.mm (Un-sheathed)	Iteam152	500	Mtr.
221	221	Overall size 4sq.mm (Un-sheathed)	Iteam153	50	Mtr.
222	222	Overall size 16sq.mm (Un-sheathed)	Iteam154	25	Mtr.
223	223	COPPER EARTHING:\n8 SWG COPPER EARTHING ::\nEarthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre Including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long	Iteam155	2	Nos.
224	224	Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-\nAdditional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (On Surface)	Iteam156	100	Mtr.
225	225	SWITCH DISCONNECTOR FUSE UNIT\n(With Sheet Enclosure):
226	226	Supply and erection of Switch Disconnector Fuse Unit with HRC Fuses (Suitable for DIN HRC Fuses) in sheet enclosure on the existing surface Confirms to IS 13947 (Part-III), IEC 60947- 3 complete with G.I. Bolts, Nuts & Connections on both sides of switch with suitable size of thimbles, including cost of DIN HRC fuses as per PWD General Specifications:-
227	227	SDF TP&N 63Amp., 415volts (With Sheet Enclosure)	Iteam157	1	No.
228	228	SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:\nSupply and erection of sheet metal double door distribution boards of suitable size and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles and bonding to existing earth etc.
229	229	Sheet metal double door T.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/RCCB's for outgoing 8 way each	Iteam158	1	No.
230	230	Sheet metal plug and socket distribution board single pole MCB and neutral enclosure with a two pin and earth plug socket to incorporate in one single pole MCB 20amp.	Iteam159	1	No.
231	231	SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:\nSupply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&Ndistribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
232	232	SP&N Double Door Distribution Board 8 way each	Iteam160	24	Nos.
233	233	AC Plug and Socket SP&N with provision of One Single Pole MCB 20amp.	Iteam161	1	No.
234	234	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:\nSupply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
235	235	Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.)	Iteam162	100	Mtr.
236	236	Supply and erection of High quality aluminium extruded with decorative end caps glazed LED batten of Make Jaguar Item Code LGLZ01x020XC or Its equilant Make and Cat. of Philips / Wipro including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer in-charge at site.	Iteam163	15	Nos.
237	237	S/E of Energy Saving Fan Ceiling Fans 1200 mm sweep ( 48\" ) having two ball bearing but without regulator including flexible wire & petty material etc. for connections complete with erection, connections and testing etc. complete in all respect as approved and desired by the Engineer-in-charge at site. Make :- Crompton Entrust 50-5 Star or its equillant make Havells ES-50 Premium 5 Star /Orient.	Iteam164	30	Nos.
238	238	Supply and erection of 12\" Heavy Duty Exhaust fan (HDEF) (300mm-900RPM) Single Phase of make Crompton Model EXHD 300-6-1 or Its equialant Make Havell's Turbo Force SP / GE 151 marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and louver shutter complete in all respectsas appd. and desired by the Engineer in-charge at site	Iteam165	2	Nos.
239	239	Supply and erection of Plastic Ventialtion Fan Ventilus 10\" (250 mm - 900 RPM) single Phase of make Crompton , White Colour or Its equialant Make Havell's / GE including erection, connections and testing etc. complete with flexible wire and petty material regd. for connections and louver shutter complete in all respects as approved and desired by the Engineer in-charge at site	Iteam166	2	Nos.
240	240	Supply and erection of Wall fan of 400mm sweep (16\") High Speed. Make Crompton WM Fizzair Opel White or Its equilant make Havell's / Orient ISI marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and Aluminium louver shutter complete in all respects as appd. and desired by the Engineer in-charge at site.	Iteam167	1	No.
241	241	Supply and erection of Glazed LED Batten Hgh Qualty Aluminium Extruded with decorative end caps of Make Jaguar Item Code LGLZ01X0410XC or Its equilant Make and Cat. of Philips / Wipro including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer In-charge at site.	Iteam168	37	Nos.
242	242	Supply and Erection of Recess mounted white powder coated CRCA housing with Window acrylic diffuser LED Panel 2' x 2' 36 w of make Jaquar Item Code LULTO IS 036XC 1 or its equilant make Phillips / Wipro including cutting of ceiling, erection, connections and testing etc. of the same with petty material as required at site complete in all respects as approved and desired by the Engineer in charge at site.	Iteam169	5	Nos.
243	243	Supply and Erection of Neve Plus (Square) LED recess mounte square pannel with aluminium die cast housing of make Jaguar item code LNEPO1SO18XC or its equilivalent make and cat of Philips / Wipro with cut out dimensions of 206 mm x 206 mm incuding cutting of ceiling, erection, connections and testing etc of the same on wall with petty material as required at site complete in all respects as approved & desired by the Enaineer-in-Charge.	Iteam170	4	Nos.
244	244	Supply & erection of Computer Terminal suitable for Computer Networking with modular accessories one on. metal box 12 module 8\" x 6\", 3 Nos. Switch 6 Amp, 3 Nos. Socket 3 pin 16 Amp, 1 No. Switch 20 Amp, 1 Nos. Socket 20 Amp and 1 No. Modular Accessories including connections & testing complete in all respect as desired by the Engineer-In-Charge at site.	Iteam171	8	Nos.
245	245	XLPE INSULATED UN-ARMOURED CABLES (LOOSE):\nSupply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
246	246	Overall size 35sq.mm (3½ Core) Unarmoured (Loose)	Iteam172	100	Mtr.
247	247	Supply & Erection of LED Street Light 45w in aluminium pressure Die Cast housing with touched glass cover (IP 66 protection ) of Make Jaguar Item Code LSR T 0150 4SxC or its equilant make and Cat Philips / Wipro / Halonix including erection of the same with the existing bracket fixed with pole, connections and testing etc. complete in all respects as aproved by the Engineer in charge at site.	Iteam173	7	Nos.
248	248	SINGLE ARM BRACKETS FOR GI PIPE POLE:\nSupply and erection of G.I. Pipe 40mm dia. (A-class) Single arm bracket of suitable length give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the top of the GI pipe pole having top outer dia. 80mm/100mm with GI reducer of suitable size with two coats of an approved aluminium paint complete in all respect as approved by the Engineer-in-charge at site:-\nSingle Arm Bracket 1 metre Long with G.I.\nReducer 80mm x 40mm	Iteam174	7	Nos.
249	249	SUPPLY AND ERECTION OF WIRING ACCESSORIES:\nSupply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:-
250	250	Bakelite Batten Holder (Large size)	Iteam175	1	No.
251	251	LAN (Data Cabling and Computer Networking)
252	252	Supply, erection Testing and Commissioning of CAT6 UTP Networking Cable of 10/100/1000 Mbps DCC in existing PVC conduit complete In all respect as desired by the engineer in charge at site. Make D-LInk/D191-Link/AMP complete in all respects as approved and desired by the Engineer In charge at site.	Iteam176	500	Mtr.
253	253	Supply & erection of CAT 6 ONE Meter long Patch Cord Having RJ-45 Male Connectors on both ends DCC up-to 10/100/1000 mbps. Make: D-Link/Panduit/Schneide complete in all respects as per satisfaction of the Engineer-in-Charge	Iteam177	15	Nos.
254	254	Supply & erection of CAT 6 TWO Meter long Patch Cord Having RJ-45 Male Connectors on both ends DCC up-to 10/100/1000 mbps. Make: D-Link/Panduit/Schneider complete in all respects as per satisfaction of the Engineer-in-Charge	Iteam178	15	Nos.
255	255	Supply & erection of CAT 6 Information Outlet (I/O) with 3\" x 3\" Polycarbonate face plate for termination of Networking Cable. Make: D-Link/Panduit/Schneider complete in all respects as per satisfaction of the Engineer-in-Charge	Iteam179	15	Nos.
256	256	Supply & erection of CAT6, 24 Port Fully loaded Patch Panel, Rack Mountable for cable termination. Make: D-Link/Panduit/Schneidercomplete in all respects as per satisfaction of the Engineer-in-Charge	Iteam180	1	No.
257	257	Supply & erection of 9U Wall mount 19\" Rack with glass door, lock & key facility 450mm 550mm depth. with CPD, Cable Manager (Si Fan. Make: D-Link/Comrack/Netrack complete in all respects as per satisfaction of the Engineer-in-Charge	Iteam181	1	No.
258	258	Supply & erection of 24 Port manageable 10/100/1000 Mbps Layer 2 Data switch with 2 Combo 1 Gbps copper & SFP Port Make: CISCO/Juniper complete in all respects as per satisfaction of the Engineer-in-Charge	Iteam182	1	No.
259	259	Supply & erection of 800VA LIT sine wave UPS/ Power Plant with 2 SMF batteries having 30 Minutes backup time. Make-APC/NUMERIC/BPE complete in all respects as per satisfaction of the Engineer-in-Charge	Iteam183	1	No.
260	260	Supply & erection of 25 mm 151 marked PVC channel on wall surface. Make AKG/ L&T/Sanico/LK/MK complete in all respects as approved and desired by the Engineer in charge at site.	Iteam184	50	Mtr.
261	261	Supply & erection of 45mm x 45 mm Cable Management Tray slotted Gray Colour 151 marked PVC on wall surface. Make AKG/L&T/LK/MK/ Sanico complete in all respects as approved and desired by the Engineer in charge at site.	Iteam185	5	Mtr.
262	262	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:\nSupply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
263	263	Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)	Iteam186	250	Mtr.
264	264	EPABX System
265	265	Supply & Erection of Digital EPBX System 100% Non-Blocking, Auto Attendant, CLI, 3 Party Conferences Configured for 04 Trunk & 12 Normal Extensions. 12VDC Power Supply Adaptor Make: Matrix Vision Pro / Panasonic / NEC complete in all respects as per satisfaction of the Engineer-in-Charge	Iteam187	1	No.
266	266	Supply & Erection of 20 Pairs MDF + 20 Pair IDF with Krone Modules & Lockable Box complete in all respect. Make Krone complete in all respects as per satisfaction of the Engineer-in-Charge	Iteam188	1	No.
267	267	Supply & Erection of Basic Wired Telephone with Display, Redial, CLIP & Mute Compatible with EPABX System. Make: Beetel Model: M51/C51 complete in all respects as per satisfaction of the Engineer-in-Charge. Make : Beetal / Panasonic	Iteam189	10	Nos.
268	268	Supply & Erection of Featured Wired Telephone with Blue Backlit Display, Redial, CLIP, 2 Way Speaker, Calculator, Mute Compatible with EPABX System.complete in all respects as per satisfaction of the Engineer-in-Charge Make : Beetal / Panasonic	Iteam190	2	Nos.
269	269	Supply & Erection of 02 Pair 0.5mm PVC Dual sheathed Telephone Cable as per ITD Specification with Up to amendments. complete in all respects as per satisfaction of the Engineer-in-Charge	Iteam191	500	Mtr.
270	270	Supply & Erection of RJ-11 Telephone Socket With 3\" x 3\" size Polycarbonate face plate complete in all respect. Make: D-Link/Legrand/Roma/Anchor. complete in all respects as per satisfaction of the Engineer-in-Charge	Iteam192	12	Mtr.
271	271	Supply & erection of 25 mm ISI marked PVC channel on wall surface. Make AKG/ L&T/Sanico/LK/MK complete in all respects as approved and desired by the Engineer in charge at site.	Iteam193	50	Mtr.
272	272	COPPER EARTHING:\n8 SWG COPPER EARTHING ::\nEarthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre\n(34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long	Iteam194	1	Nos.
273	273	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:\nSupply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications (Electrical Works) :-
274	274	Heavy gauge PVC conduit pipe 25mm dia. (ISI marked 2mm thick) Flushed	Iteam195	250	Mtr.
275	275	Supply, Erection. Testing and Commissioning of 25 KVA /20 Kw Diesel Generator set with silent canopy without AMF panel comprising of 0.8 Power Factor. 3 Phase 415 V, 50 HZ, 1500 RPM 42 bhp, electric Start 3 Cylinder 4 stroke Cycle, Water cooled Turbo charged aspirated complete with flywheel with starter ring for Generating Set. Air Fillter, Lube oil cooler assembly with accessories, Exhaust air manifold, Exhaust Silencer, Expansion bellow, fuel filter . Lube oil filter . exhaust gas tubocharged after cooled, Radiator with pusher type fan, with fan guard . coolant pump , 12 V electrical starting system with starter motor and battery charging alternator. Fuel Injection Pump with Electronic Governor and fuel feed pump. Engine control panel - Microprocessor based controller, Engine Mounting supports, Safeties and Indications against Low Lube Oil Pressure and High coolant tempreture etc. K Cool super plus corrosion inhibitor coolant for cooling and coupled with 200 KVA Alternator engine make Kirloskar / cummins / Greaves and Alternator Make: Stampford/ Kirloskar / Crompton with sound proof accoustc enclosure , Echo Friendly ( CPCB-II norms compliance) complete with all accessories. The Generator set should be installed at site on the suitable size plinth of RCC as per specification including making of plinth for DG set as per satisfaction of the Engineer-In-Charge at site. The model of Engine will be decided by the Engineer in Charge.	Iteam196	1	Jobs
276	276	XLPE INSULATED ARMOURED CABLES (LOOSE):\nSupply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
277	277	Overall size 50sq.mm (3½ Core) Armoured (Loose)	Iteam197	50	Mtr.
278	278	COPPER EARTHING:\n8 SWG COPPER EARTHING ::
279	279	Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level inthe hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-\nEarthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long	Iteam198	2	Nos.
280	280	Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:- \nAdditional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed)	Iteam199	20	Mtr.
281	281	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
282	282	Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
283	283	Double Walled Corrugated HDPE Pipe 90/76mm (Outer/ Inner dia.)	Iteam200	40	Mtr.
284	284	SHEET METAL IRON CLAD CHANGEOVER SWITCHES:\nSupply and erection of sheet metal Iron Clad Changeover Switch on existing surface with G.I. bo ts & nuts/rag bolts and nuts etc., according to the size of holes in the body of the switch including connections with suitable size of thimbles and bonding to the existing earth as per PWD General Specifications:-
285	285	ICDP Changeover Switch 100amp., 415volts	Iteam201	1	No.
286	286	Supplying and planting permanent trees including digging of pits size 75cm x 75cm x 75cm deep, refilling the excavated earth. With with manure supplied @ 0.113 4 cum each like Neem ,Ashoka ,Dake Arjun Etc. CSR 32.16	Iteam202	22	No.
287	287	Planting ground cover plants including digging and refilling of beds with excavated soil and FYM, Fertilizer and insecticides, planting of saplings at 30cm distance from plant to plant and row to row, providing and fixing brick tiles edging. CSR 32.22	Iteam203	22	No.
288	288	Planting flower beds including digging and refilling of beds with excavated soil and FYM, fertilizer and insecticides, planting of sapling at 30cm distance from plant to plant and row to row.	Iteam204	20	sqm
289	289	Provision for One way stand post with Khurra complete in all respects.	Iteam205	1	job

Also Visit

Tenders

Punjab Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Office Building For Division Office Barnala At Water Works Site Jcc Side In District Administrative Complex Barnala In Punjab Construction Of Building , Providing Public Health Services I . E . Internal Water Supply , Estate Water Suppl, Water Works Site At Jcc Barnala-Punjab

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Office Building For Division Office Barnala At Water Works Site Jcc Side In District Administrative Complex Barnala In Punjab Construction Of Building , Providing Public Health Services I . E . Internal Water Supply , Estate Water Suppl, Water Works Site At Jcc Barnala-Punjab

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us