Madhya Pradesh State Cooperative Dairy Federation Limited has published Supply Of Spare Parts Of Cattle Feed Plant Machinery. Submission Date for this Tender is 23-02-2021. Spare Part Tenders in CATTLE FEED FACTORY PACHAMA Madhya Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: SUPPLY OF SPARE PARTS OF CATTLE FEED PLANT MACHINERY | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Required Quantity | Units | |
1 | 1 | NAME OF THE ITEM FOR PACHAMA | |||
2 | 1.01 | Pallet Mill die 8mm hole Super Senior extra wide Size: 630 mm OD 520mm ID222 mm Phase, 17 Rows of Holes with straight caller & m-20x12 holes both sides on 565 PCD | item1 | 12 | Nos |
3 | 1.02 | Roller Shells “V” grooved for above Size 250mm OD 180mm ID(Suitable for Bearing no. 32220, 182 mm wide | item2 | 50 | Nos |
4 | 1.03 | Roller Assembly Complete with shell & Bearing etc. Bearing SKF/FAG/ZKL | item3 | 10 | Nos |
5 | 1.04 | Die Holder Assembly Complete with “T” Shaft, Bearings 32324 & 32224, Bearing covers, Oil Seals etc. Bearing SKF/FAG/ZKL | item4 | 1 | NO |
6 | 1.05 | Die Holder only (Alloy Steel Forging) | item5 | 1 | NO |
7 | 1.06 | “T” Shaft with centralized greasing system | item6 | 1 | NO |
8 | 1.07 | i) Eccentric Shaft (Alloy Steel) (Spare for Roller Assembly) | item8 | 4 | Nos |
9 | 1.08 | ii) Middle Spacer 51 mm wide(Spare for Roller Assembly) | item9 | 4 | Nos |
10 | 1.09 | iii) Bearing Cover Plate(Spare for Roller Assembly) | item10 | 24 | Nos |
11 | 1.1 | iv) Bearing Pressing Plate(Spare for Roller Assembly) | item11 | 20 | Nos |
12 | 1.11 | v) Circlip 180 mm Inner(Spare for Roller Assembly) | item12 | 50 | Nos |
13 | 1.12 | vi) Lock nut for Eccentric Shaft m-20(Spare for Roller Assembly) | item13 | 10 | Nos |
14 | 1.13 | vii) Lock Nut Washer for above MB-20(Spare for Roller Assembly) | item14 | 10 | Nos |
15 | 1.14 | viii) Clamping Device (Setting Ring of male female rings)(Spare for Roller Assembly) | item15 | 12 | Nos |
16 | 1.15 | ix) Centre Bolt for roller Alen Type (Unbreako/ TVS/LPS)(Spare for Roller Assembly) | item16 | 10 | Nos |
17 | 1.16 | x) Nut for Centre Bolt Attached with 1 male ring & Pin (Spare for Roller Assembly) | item17 | 12 | Nos |
18 | 1.17 | Front scraper assembly | item18 | 2 | Nos |
19 | 1.18 | Stud for front scraper assembly | item19 | 24 | Nos |
20 | 1.19 | Roller locking Assembly with Two Disc and master plate | item20 | 2 | Nos |
21 | 1.2 | Share Pin Block | item21 | 1 | Nos |
22 | 1.21 | Share Pin 18 mm Dia | item22 | 500 | Nos |
23 | 1.22 | Paddles for conditioner of 330 mm die of SS-304 with Stud and Nut | item23 | 100 | Nos |
24 | 1.23 | Die Ring rear for Straight collar die (Alloy Steel EN-9) | item24 | 1 | NO |
25 | 1.24 | Die Ring front for Straight collar die (Alloy Steel EN-9) | item25 | 1 | NO |
26 | 1.25 | Die cover with 4 Hooks size 520 OD x 340 mm ID x 130 mm wide made of SS 304 x 3 mm thick plate SS-304 | item26 | 2 | Nos |
27 | 1.26 | Main Bearing cover Plate front with Oil Seal 180-150-13 for Bearing 32324 | item27 | 2 | Nos |
28 | 1.27 | Main Bearing cover Plate Rear with Oil Seal 170-150-13 for Bearing 32224 | item28 | 2 | Nos |
29 | 1.28 | Main Bearing Pressing Ring front | item29 | 2 | Nos |
30 | 1.29 | Main Bearing Pressing Ring rear | item30 | 2 | Nos |
31 | 1.3 | Pallet Die Guard Assembly with Pallet cutter made of 6 mm thick SS 304 Plate | item31 | 1 | NO |
32 | 1.31 | Feeder Complete with screw about 02 Meter long 400 mm Dia | item32 | 2 | NO |
33 | 1.32 | Pallet Mill Main Pully SPC Section 9 Grove x 1220 mm Dia close grain CI Dynamically balanced +- 2 Grms. | item33 | 1 | NO |
34 | 1.33 | Pallet Mill Counter Pully SPC Section 9 Grove x 230 mm Dia close grain CI Dynamically balanced +- 2 Grms. | item34 | 1 | NO |
35 | 1.34 | Die Bolt 20x50 mm High Tensile (Unbreako/ TVS/LPS | item35 | 100 | Nos |
36 | 1.35 | Die Bolt 20x140 mm High Tensile (Unbreako/ TVS/LPS | item36 | 100 | Nos |
37 | 1.36 | Die Bolt Washer (Spacer) | item37 | 200 | Nos |
38 | 1.37 | Bush for “T” Shaft (Roller Holding Bush) | item38 | 2 | Nos |
39 | 1.38 | Elevator Belt 10” 4 Ply | item39 | 100 | Nos |
40 | 1.39 | Elevator MS Bucket 8*5, 3 Hole | item40 | 300 | Nos |
41 | 1.4 | Elevator Bucket Bolt(3*8, 1 1/2) | item41 | 900 | Nos |
42 | 1.41 | Twin Rotor With Motor 10 HP Complete | item42 | 1 | NO |
43 | 1.42 | Fidder Condisnior Soft Complite SS 2 Mtr. | item43 | 2 | NO |
44 | 1.43 | Sprocket Duplex 1" 10 Teeth | item44 | 12 | NO |
45 | 1.44 | Sprocket Duplex 1" 14 Teeth | item45 | 12 | NO |
46 | 1.45 | Sprocket Duplex 1" 18 Teeth | item46 | 12 | NO |
47 | 1.46 | Sprocket Duplex 1" 19 Teeth | item47 | 12 | NO |
48 | 1.47 | Sprocket Duplex 1" 25 Teeth | item48 | 6 | NO |
49 | 1.48 | Sprokit Duplex ¾" 14 Teeth | item49 | 12 | NO |
50 | 1.49 | Sprocket Duplex ¾" 95 Teeth | item50 | 2 | NO |
51 | 1.5 | Sprocket Duplex 1" 50 Teeth | item51 | 2 | NO |
52 | 1.51 | Side Glass 200 MM PVC Round | item52 | 12 | NO |
53 | 1.52 | Vindish charger 3 HP Motor With Gair Box Complete | item53 | 2 | NO |
54 | 1.53 | Elevator Botom Drum Complete With Bearing 4mm seet | item54 | 2 | NO |
55 | 1.54 | Pellet Mill Hopper SS Make | item55 | 1 | NO |
56 | 1.55 | Betch Selector Switch 15 Motor | item56 | 1 | NO |
57 | 1.56 | Pellet Bin SS Make 4 MM Seet 6 M.T. | item57 | 1 | NO |
58 | 1.57 | Pellet Mill Cover SS 5 MM Seet with Gard Complete | item58 | 1 | NO |
59 | 1.58 | Molases Pump 4" With Flench Complete | item59 | 1 | NO |
60 | 1.59 | Molases Pump 2" With Flench Complete | item60 | 1 | NO |
61 | 1.6 | Hammer Mill Beater size 140 x 60 x 6 mm thick | item61 | 200 | Nos |
62 | 1.61 | Hammer Mill Sieve 5 mm Hole perforation size about 880 x 720 x 3 mm thick | item62 | 10 | Nos |
63 | 1.62 | Hammer Mill Beater Holding Rod 18 mm Dia | item63 | 24 | Nos |
64 | 1.63 | Hammer Mill Beater Spacing Bush | item64 | 200 | Nos |
65 | 1.64 | Elevator Top Drum about 600 mm Dia x 300 mm width complete with shaft about 800 mm length x 50mm Dia suitable for Bearing 1211 K | item65 | 4 | Nos |
66 | 1.65 | SS 304 Wire Mesh For Vibro 5MM OPG x 1.50 MM Dia Size 72” x 72” | item66 | 2 | Nos |
67 | 1.66 | Chain Conveyor Chain size 285 | item67 | 50 | Mtr |
68 | 1.67 | Chain Conveyor Chain size 385 | item68 | 100 | Mtr |
69 | 1.68 | Chain Conveyor Spocket 9 teeth with shoft 50 mmx600 mm | item69 | 4 | NO |
70 | 1.69 | Chain 1" simplex | item70 | 15 | Mtr |
71 | 1.7 | Elivator Jacket 300x290 mm | item71 | 20 | NO |
72 | 1.71 | Pelet Cooler Blower Empeler S.S with soft and bearing | item72 | 1 | NO |
73 | 1.72 | T-Shaft Gun Metal Bush | item73 | 2 | NO |
74 | 1.73 | 150 HP Motor Bes Frem | item74 | 1 | NO |
75 | 1.74 | Slate Conveyor Chain | item75 | 50 | Mtr |
76 | 1.75 | Slate Conveyor Sprocket | item76 | 4 | NO |
77 | 1.76 | Motor with Gair Box 5 HP-127 RPM PBL | item77 | 6 | NO |
78 | 1.77 | Motor 3 HP- 80 RPM PBL | item78 | 4 | NO |
79 | 1.78 | Pully 14” 2 Group B Section | item79 | 6 | NO |
80 | 1.79 | Pully 3” +4” 2 Group B Section | item80 | 6 | NO |
81 | 1.8 | Sprokit 15 Theeth Duplex ¾ | item81 | 6 | NO |
82 | 1.81 | ¾ Duplex Chain | item82 | 15 | Mtr |
83 | 1.82 | Duplex Chain 1" Roller | item83 | 50 | Mtr |
84 | 1.83 | Joot Seprator | item84 | 2 | NO |
85 | 1.84 | Pellet Cooler Assentric | item85 | 1 | NO |
86 | 1.85 | Pellet Sheev Jaali 6 mm SS | item86 | 3 | NO |
87 | 1.86 | Chain Conveyor Roll | item87 | 100 | Mtr |
88 | 2 | NAME OF THE ITEM FOR MANGLIA | |||
89 | 2.01 | Pallet Mill die 8mm hole Super Senior extra wide Size: 630 mm OD 520mm ID 222 mm Phase, 17 Rows of Holes with straight caller & m-20x12 holes both sides on 565 PCD | item89 | 15 | Nos |
90 | 2.02 | Roller Shells “V” grooved for above Size 250mm OD 180mm ID(Suitable for Bearing no. 32220, 182 mm wide | item90 | 70 | Nos |
91 | 2.03 | Roller Assembly Complete with shell & Bearing etc. Bearing NBC | item91 | 4 | Nos |
92 | 2.04 | Die Holder Assembly Complete with “T” Shaft, Bearings 32324 & 32224, Bearing covers, Oil Seals etc. Bearing NBC | item92 | 1 | No |
93 | 2.05 | Die Holder only (Alloy Steel Forging) | item93 | 1 | No |
94 | 2.06 | “T” Shaft with centralized greasing system | item94 | 1 | No |
95 | 2.07 | i) Eccentric Shaft (Alloy Steel) (Spare for Roller Assembly) | item95 | 4 | Nos |
96 | 2.08 | ii) Middle Spacer 51 mm wide (Spare for Roller Assembly) | item96 | 4 | Nos |
97 | 2.09 | iii) Bearing Cover Plate (Spare for Roller Assembly) | item97 | 24 | Nos |
98 | 2.1 | iv) Bearing Pressing Plate (Spare for Roller Assembly) | item98 | 24 | Nos |
99 | 2.11 | v) Circlip 180 mm Inner (Spare for Roller Assembly) | item99 | 60 | Nos |
100 | 2.12 | vi) Lock nut for Eccentric Shaft m-20 (Spare for Roller Assembly) | item100 | 20 | Nos |
101 | 2.13 | vii) Lock Nut Washer for above MB-20 (Spare for Roller Assembly) | item101 | 20 | Nos |
102 | 2.14 | viii) Clamping Device (Setting Ring of male female rings) (Spare for Roller Assembly) | item102 | 20 | Nos |
103 | 2.15 | ix) Centre Bolt for roller Alen Type (Unbreako/ TVS) (Spare for Roller Assembly) | item103 | 20 | Nos |
104 | 2.16 | x) Nut for Centre Bolt Attached with 1 male ring & Pin (Spare for Roller Assembly) | item104 | 20 | Nos |
105 | 2.17 | Front scraper assembly | item105 | 2 | Nos |
106 | 2.18 | Stud for front scraper assembly | item106 | 24 | Nos |
107 | 2.19 | Roller locking Assembly with Two Disc and master plate | item107 | 4 | Nos |
108 | 2.2 | Share Pin Block | item108 | 2 | Nos |
109 | 2.21 | Share Pin 18 mm Dia | item109 | 500 | Nos |
110 | 2.22 | Paddles for conditioner of 330 mm die of SS-304 with Stud and Nut | item110 | 100 | Nos |
111 | 2.23 | Die Ring rear for Straight collar die (Alloy Steel EN-9) | item111 | 1 | No |
112 | 2.24 | Die Ring front for Straight collar die (Alloy Steel EN-9) | item112 | 1 | NO |
113 | 2.25 | Die cover with 4 Hooks size 520 OD x 340 mm ID x 130 mm wide made of SS 304 x 3 mm thick plate SS-304 | item113 | 4 | Nos |
114 | 2.26 | Main Bearing cover Plate front with Oil Seal 180-150-13 for Bearing 32324 | item114 | 2 | Nos |
115 | 2.27 | Main Bearing cover Plate Rear with Oil Seal 170-150-13 for Bearing 32224 | item115 | 2 | Nos |
116 | 2.28 | Main Bearing No. 32324 NBC for Pellet Machine Die Holder | item116 | 2 | Nos |
117 | 2.29 | Main Bearing No. 32224 NBC for Pellet Machine Die Holder | item117 | 2 | Nos |
118 | 2.3 | F- 100 Tyre coupling Complete Fenner make | item118 | 2 | Nos |
119 | 2.31 | Magnet Flat type for Pellet Machine Both Site | item119 | 2 | Nos |
120 | 2.32 | Roller Shell Bearing No. 32220 NBC | item120 | 10 | Nos |
121 | 2.33 | Main Bearing Pressing Ring front | item121 | 2 | Nos |
122 | 2.34 | Main Bearing Pressing Ring rear | item122 | 2 | Nos |
123 | 2.35 | Pallet Die Guard Assembly with Pallet cutter made of 6 mm thick SS 304 Plate | item123 | 1 | Nos |
124 | 2.36 | Feeder Complete with screw about 02 Meter long 400 mm Dia | item124 | 1 | No |
125 | 2.37 | Pallet Mill Main Pulley SPC Section 9 Grove x 1220 mm Dia close grain CI Dynamically balanced +- 2 Grms. | item125 | 1 | No |
126 | 2.38 | Pallet Mill Counter Pulley SPC Section 9 Grove x 230 mm Dia close grain CI Dynamically balanced +- 2 Grms. | item126 | 1 | NO |
127 | 2.39 | Die Bolt 20x50 mm High Tensile (Unbreako/ TVS) | item127 | 100 | Nos |
128 | 2.4 | Die Bolt 20x140 mm High Tensile (Unbreako/ TVS) | item128 | 100 | Nos |
129 | 2.41 | Die Bolt Washer (Spacer) | item129 | 100 | Nos |
130 | 2.42 | Bush for “T” Shaft (Roller Holding Bush) | item130 | 2 | Nos |
131 | 2.43 | Pellet mill (JU) Door with Duct having magnet, Moc. 55304 | item131 | 1 | Nos |
132 | 2.44 | Conveyor railing M.S. plate 20mm x 14 mm x 10 feet x 16 Pcs | item132 | 160 | Feet |
133 | 2.45 | Cutter (Knife) Pallet Machine | item133 | 4 | Nos |
134 | 2.46 | Pellet Mill Cover S.S. 5mm Sheet with Guard Complete | item134 | 1 | Nos |
135 | 2.47 | Molasses Rotary Gear Pump 1” X 1” | item135 | 1 | Nos |
136 | 2.48 | Chain Conveyor Chain Size 285 (Spares for Conveyor) | item136 | 50 | Mtr. |
137 | 2.49 | Chain Conveyor Chain Size 385 (Spares for Conveyor) | item137 | 50 | Mtr. |
138 | 2.5 | Chain 1” Simplex (Spares for Conveyor) | item138 | 15 | Mtr. |
139 | 2.51 | Slate Conveyor Chain (Spares for Conveyor) | item139 | 50 | Mtr. |
140 | 2.52 | Pellet Cooler Blower Impellor S.S (Spares for Conveyor) | item140 | 1 | NO |
141 | 2.53 | Slate Conveyor Chain (Spares for Conveyor) | item141 | 20 | Mtr. |
142 | 2.54 | Slate Conveyor Sprocket (Spares for Conveyor) | item142 | 2 | NO |
143 | 2.55 | Motor with Gear Box 5 HP-127 RPM PBL (Spares for Conveyor) | item143 | 2 | NO |
144 | 2.56 | Pulley 14” 2 Group B Section (Spares for Conveyor) | item144 | 2 | NO |
145 | 2.57 | Pulley 3” 2 Group B Section (Spares for Conveyor) | item145 | 2 | NO |
146 | 2.58 | Pulley 4” 2 Group B Section (Spares for Conveyor) | item146 | 2 | NO |
147 | 2.59 | Jute Separator (Spares for Conveyor) | item147 | 1 | NO |
148 | 2.6 | Chain Sprocket 1” x 17 Teeth Simplex(Spares for Conveyor) | item148 | 10 | Nos |
149 | 2.61 | Chain Sprocket 1” x 18 Teeth Simplex(Spares for Conveyor) | item149 | 4 | Nos |
150 | 2.62 | Chain Sprocket 1” x 19 Teeth Simplex(Spares for Conveyor) | item150 | 10 | Nos |
151 | 2.63 | Hammer Mill Beater size 140 x 60 x 6 mm thick (Spares for Hammer Mill) | item151 | 60 | Nos |
152 | 2.64 | Hammer Mill Sieve 5 mm Hole perforation size about 880 x 720 x 3 mm thick (Spares for Hammer Mill) | item152 | 10 | NO |
153 | 2.65 | Hammer Mill Beater Holding Rod 18 mm Dia (Spares for Hammer Mill) | item153 | 12 | Nos |
154 | 2.66 | Hammer Mill Beater Spacing Bush (Spares for Hammer Mill) | item154 | 24 | Nos |
155 | 2.67 | Elevator Top Drum about 600 mm Dia x 300 mm width complete with shaft about 800 mm length x 50mm Dia suitable for Bearing 1211 K 4MM Sheet (Spares for Elevator) | item155 | 2 | Nos |
156 | 2.68 | Elevator MS Bucket 8*5, 3 Hole (Spares for Elevator) | item156 | 300 | Nos |
157 | 2.69 | Elevator Bottom drum Complete with shaft suitable for bearing F-210 4mm sheet (Spares for Elevator) | item157 | 2 | Nos |
158 | 2.7 | Elevator Bucket Bolt(3*8, 1 1/2) (Spares for Elevator) | item158 | 900 | Nos |
159 | 2.71 | Elevator rubber Belt10" 4 Ply (Spares for Elevator) | item159 | 100 | Mtr. |
160 | 2.72 | 72" Jointing clamp S.S. (Spares for Vibro Screen) | item160 | 1 | Set |
161 | 2.73 | 72" S.S. Screen fitting Frame (Spares for Vibro Screen) | item161 | 1 | Nos |
162 | 2.74 | SS 304 Wire Mesh For Vibro 5MM OPG x 1.50 MM Dia Size 72” x 72” (Spares for Vibro Screen) | item162 | 4 | Nos |
163 | 3 | NAME OF THE ITEM FOR BANDOL | |||
164 | 3.01 | Feed Plummer Block with Bearing UCT-210 | item163 | 2 | Nos |
165 | 3.02 | Discharge Plummer Block with Bearing UCF-210 | item164 | 2 | Nos |
166 | 3.03 | Chain 150 Width | item165 | 10 | Mtr |
167 | 3.04 | Sprocket- 125 mm Pitch x 6 Teeth | item166 | 2 | Nos |
168 | 3.05 | Oil Seal- 55 dia x 70 diax 10thk. | item167 | 20 | Set |
169 | 3.06 | Intake Bacth chain conveyor Gear Motor 5 HP, RPM-1450, RHS Box | item168 | 1 | Set |
170 | 3.07 | Pedestal Bearing for Driving pulley SNA-509-1209K + H 209 | item169 | 2 | Nos |
171 | 3.08 | Bearing for Bottom UCT-208 | item170 | 4 | Nos |
172 | 3.09 | Bucket 6" | item171 | 2 | Nos |
173 | 3.1 | Bucket fasteners 5/16' x 1-1/4' long | item172 | 4 | Nos |
174 | 3.11 | Drive Sprocket - 1 " Pitch x 18 teeth | item173 | 2 | Nos |
175 | 3.12 | Driven Sporcot -1 "Pitch x 18 teeth | item174 | 2 | Nos |
176 | 3.13 | Driving Chain | item175 | 1 | Set |
177 | 3.14 | Belt 8" wide 3 ply Nylon, 3mm top, 1.5mm bottom thickness food grade | item176 | 76 | Mtr |
178 | 3.15 | Bearing 22316k + H22316 | item177 | 4 | Nos |
179 | 3.16 | Beaters M Type | item178 | 48 | Nos |
180 | 3.17 | Distance Bush | item179 | 48 | Nos |
181 | 3.18 | Sieves 6 mm Dia Hole/ 3 mm thk.MS | item180 | 1 | Set |
182 | 3.19 | Vibration Dampers Anti Vibration Dampers Super Mount PS5-3D | item181 | 2 | Nos |
183 | 3.2 | HRC 180 rubber spider | item182 | 10 | Nos |
184 | 3.21 | Air cylinder Kit 1218K + H218 | item183 | 1 | Nos |
185 | 3.22 | Main Bearing - 1218K + H218 & 2218K + H318 | item184 | 2 | Nos |
186 | 3.23 | Plummer Block SNA-518 | item185 | 2 | Nos |
187 | 3.24 | Bearing for flap UCF-210 | item186 | 2 | Nos |
188 | 3.25 | Chain 1-1/2'' Pitch Simplex | item187 | 10 | Mtr |
189 | 3.26 | Limit Switch 10A – 500 V | item188 | 2 | Nos |
190 | 3.27 | Beaters 50 X 10mm THK. SS304 (PADDLE TYPE MOLASSES MIXER) | item189 | 1 | Set |
191 | 3.28 | Main Bearing UCF-209, UCF-210 (PADDLE TYPE MOLASSES MIXER) | item190 | 1 | Set |
192 | 3.29 | Oil Seals (PADDLE TYPE MOLASSES MIXER) | item191 | 1 | Set |
193 | 3.3 | Solenoid Valve (PADDLE TYPE MOLASSES MIXER) | item192 | 1 | Nos |
194 | 3.31 | Main Drive Belt (Set of 9) SPC -4750 (SENIOR PELLET MILL PS 420) | item193 | 2 | Set |
195 | 3.32 | Main Bearing 32224 (SENIOR PELLET MILL PS 420) | item194 | 2 | Set |
196 | 3.33 | Oil Seal 170 OD x 140 ID x 12 (SENIOR PELLET MILL PS 420) | item195 | 2 | Nos |
197 | 3.34 | Shear Pin (SENIOR PELLET MILL PS 420) | item196 | 2 | Nos |
198 | 3.35 | Die Fixing Bolts (SENIOR PELLET MILL PS 420) | item197 | 8 | Nos |
199 | 3.36 | Front Die Cover Fixing Bolts ¾ X 21/2 ‘’ Half thrad (SENIOR PELLET MILL PS 420) | item198 | 8 | Nos |
200 | 3.37 | Front Die Cover ¾’’ X 2’’(SENIOR PELLET MILL PS 420) | item199 | 1 | Nos |
201 | 3.38 | Limit Switch 10A – 500 V (SENIOR PELLET MILL PS 420) | item200 | 1 | Nos |
202 | 3.39 | Wearing Ring (SENIOR PELLET MILL PS 420) | item201 | 1 | Nos |
203 | 3.4 | Wearing Ring Fixing Bolts (SENIOR PELLET MILL PS 420) | item202 | 8 | Nos |
204 | 3.41 | Rear Scraper (SENIOR PELLET MILL PS 420) | item203 | 1 | Nos |
205 | 3.42 | Dial Thermometer PT-100 (SENIOR PELLET MILL PS 420) | item204 | 1 | Nos |
206 | 3.43 | Feeder Conditioner drive bolts (Set of 2 no.) (SENIOR PELLET MILL PS 420) | item205 | 1 | Set |
207 | 3.44 | Die Holder (SENIOR PELLET MILL PS 420) | item206 | 1 | Nos |
208 | 3.45 | Roller Holder Shaft (SENIOR PELLET MILL PS 420) | item207 | 1 | Nos |
209 | 3.46 | Press Roll Assembly (SENIOR PELLET MILL PS 420) | item208 | 2 | Nos |
210 | 3.47 | Press Roll shell 145Ø X 215Ø X 125mm LONG (20Kg) (SENIOR PELLET MILL PS 420) | item209 | 15 | Nos |
211 | 3.48 | Eccentric shaft 105Ø X 255mm LONG (17.5Kg) (SENIOR PELLET MILL PS 420) | item210 | 4 | Nos |
212 | 3.49 | Bearing Cover 100Ø X 155 X 25mm Thk. (SENIOR PELLET MILL PS 420) | item211 | 4 | Nos |
213 | 3.5 | Distance Ring (SENIOR PELLET MILL PS 420) | item212 | 2 | Nos |
214 | 3.51 | Packing Plate (SENIOR PELLET MILL PS 420) | item213 | 4 | Nos |
215 | 3.52 | Packing Ring (SENIOR PELLET MILL PS 420) | item214 | 4 | Nos |
216 | 3.53 | Clamping Nut 75Ø X 135Ø X 20mm Thk. (SENIOR PELLET MILL PS 420) | item215 | 10 | Nos |
217 | 3.54 | Bolt Special 36Ø X 290mm Long (SENIOR PELLET MILL PS 420) | item216 | 10 | Nos |
218 | 3.55 | Clamping device (outer & inner) (SENIOR PELLET MILL PS 420) | item217 | 4 | Nos |
219 | 3.56 | Bearing 32217 (SENIOR PELLET MILL PS 420) | item218 | 4 | Nos |
220 | 3.57 | Feeder Conditioner Screw (SENIOR PELLET MILL PS 420) | item219 | 1 | Nos |
221 | 3.58 | Feeder Conditioner Bearing 6203ZZ (SENIOR PELLET MILL PS 420) | item220 | 2 | Nos |
222 | 3.59 | Magnet (SENIOR PELLET MILL PS 420) | item221 | 4 | Nos |
223 | 3.6 | Front Scraper Assembly (SENIOR PELLET MILL PS 420) | item222 | 1 | Nos |
224 | 3.61 | Main Body Bushes (SENIOR PELLET MILL PS 420) | item223 | 2 | Nos |
225 | 3.62 | Cutting Knife (SENIOR PELLET MILL PS 420) | item224 | 2 | Nos |
226 | 3.63 | Die 8 MM Dia (SENIOR PELLET MILL PS 420) | item225 | 8 | Nos |
227 | 3.64 | Nylon Bush for airlock size 22/19 ( 35 dia x 45 dia x 28 thk) (SS ROTARY AIR LOCK) | item226 | 10 | Nos |
228 | 3.65 | Bearing for Eccentric Shaft 2218 (COUNTER FLOW PELLET COOLER) | item227 | 2 | Nos |
229 | 3.66 | Spring - 45 OD x 37 ID x 100 mm long (COUNTER FLOW PELLET COOLER) | item228 | 4 | Nos |
230 | 3.67 | Rotary level indicator (COUNTER FLOW PELLET COOLER) | item229 | 1 | Nos |
231 | 3.68 | Bearing on top tray 6205 zz (COUNTER FLOW PELLET COOLER) | item230 | 10 | Nos |
232 | 3.69 | Cooler feeder gear motor HP-01, RPM-1420, KW-0.75, VFL RHS Box EFF1 motor (COUNTER FLOW PELLET COOLER) | item231 | 1 | Nos |
233 | 3.7 | Springs (COUNTER FLOW PELLET COOLER) | item232 | 10 | Nos |
234 | 3.71 | Set of sieve (COUNTER FLOW PELLET COOLER) | item233 | 2 | Nos |
235 | 3.72 | Vibratory Motor 2HP, RPM 1440, KW-1.50, 415 Volt (COUNTER FLOW PELLET COOLER) | item234 | 1 | Nos |
236 | 3.73 | Filter bags Ø150 X 2060mm Long (ASPIRATION UNIT FOR HAMMER MILL) | item235 | 16 | Bags |
237 | 3.74 | Clamps (ASPIRATION UNIT FOR HAMMER MILL) | item236 | 16 | Nos |
238 | 3.75 | Sequential Timer (ASPIRATION UNIT FOR HAMMER MILL) | item237 | 1 | Nos |
239 | 3.76 | Solenoid Valve 1.5” Dia (ASPIRATION UNIT FOR HAMMER MILL) | item238 | 2 | Nos |
240 | 3.77 | Metal Wheels 125mm pitch X 6 teeth X 250 mm PCD X 15mm thk.(SLAT CONVEROR) | item239 | 1 | Nos |
241 | 3.78 | Circlip (SLAT CONVEROR) | item240 | 60 | Nos |
242 | 3.79 | Chain 75 mm pitch (SLAT CONVEROR) | item241 | 5 | Mtr |
243 | 3.8 | Drive Sprocket - 1 " P x 68 teeth Simplex (SLAT CONVEROR) | item242 | 2 | Nos |
244 | 3.81 | Driven Sprocket - 1 " P x 14 teeth Simplex (SLAT CONVEROR) | item243 | 2 | Nos |
245 | 3.82 | Drive Chain 1" Pitch (SLAT CONVEROR) | item244 | 2 | Nos |
246 | 3.83 | Bearing UCF- 210, UCT - 210 (SLAT CONVEROR) | item245 | 10 | Nos |
247 | 4 | NAME OF THE ITEM FOR SAGAR | |||
248 | 4.01 | Coupling : F-110 Fenner make rubbe F-110 Fenner make rubber Tyre couple | item246 | 4 | Nos |
249 | 4.02 | “V” belt SPC-4750 | item247 | 35 | Nos |
250 | 4.03 | Die 8 mm Tapper caller | item248 | 4 | Nos |
251 | 4.04 | Shear pin | item249 | 100 | Nos |
252 | 4.05 | Limit switch device | item250 | 40 | Nos |
253 | 4.06 | Pulley on machine 1200 mm dia 11 groove SPC section | item251 | 1 | Nos |
254 | 4.07 | Oil seal Front bearing 170x200x15/13 | item252 | 2 | Nos |
255 | 4.08 | Lock pin or circlip of roller | item253 | 30 | Nos |
256 | 4.09 | Alen key holder bolt | item254 | 30 | Nos |
257 | 4.1 | Die ring | item255 | 2 | Nos |
258 | 4.11 | Scraper | item256 | 6 | Nos |
259 | 4.12 | Chuck nut of main shaft | item257 | 10 | Nos |
260 | 4.13 | Oil seal Rear bearing 140x170x15/13 | item258 | 2 | No |
261 | 4.14 | Main bearing cover plate (front & rear) | item259 | 2 | Nos |
262 | 4.15 | Main motor pulley 225 mm dia 11 groove SPC section | item260 | 1 | Nos |
263 | 4.16 | Conditioner Drive Chain coupling 6018 | item261 | 2 | Nos |
264 | 4.17 | Die hoist ARM 6010 zz | item262 | 2 | Nos |
265 | 4.18 | Door hinge bearings 6206 zz | item263 | 4 | Nos |
266 | 4.19 | Counter shaft bearing block S -618 | item264 | 2 | Nos |
267 | 4.2 | Press roll assembly 32220 | item265 | 10 | Nos |
268 | 4.21 | Main bearing Front-NU-328 | item266 | 2 | No |
269 | 4.22 | Counter shaft 22318k+H 2318 | item267 | 2 | Nos |
270 | 4.23 | Front die cover | item268 | 2 | No |
271 | 4.24 | Chuck nut of Roller | item269 | 30 | No |
272 | 4.25 | Acrylic Glass 200 dia x 200nt. (For seght glass ) | item270 | 4 | No |
273 | 4.26 | Hammer Spacer Bush set | item271 | 4 | Nos |
274 | 4.27 | Coupling F-100 rubber type couple | item272 | 2 | Nos |
275 | 4.28 | Main bearings 22319 K | item273 | 2 | Nos |
276 | 4.29 | Sleeves H-2319 | item274 | 2 | Nos |
277 | 4.3 | Main Bearings UCF-208 | item275 | 2 | Nos |
278 | 4.31 | Permananent Magnet 500X200mm | item276 | 4 | Nos |
279 | 4.32 | Hammer EN-42 Number of hammers 72 nos, overall Dimension of beaters 142x63x8mm | item277 | 3 | Nos |
280 | 4.33 | Sieve Thickness 2.5mm, Screen size 1475x675mm, Mesh width 4 mm | item278 | 2 | Set |
281 | 4.34 | Vibration Dampers VBPGS-2D polybond make | item279 | 6 | Nos |
282 | 4.35 | Drive End bearing UCF, F-208 | item280 | 2 | Nos |
283 | 4.36 | Drive End bearing F-208 | item281 | 2 | Nos |
284 | 4.37 | Coupling Chain coupling ‘ 1’pitch, 22 teeth simplex chain | item282 | 1 | Nos |
285 | 4.38 | Gear Box PBL, Model M-062232 BGCH 1-1-5A | item283 | 1 | Nos |
286 | 4.39 | Coupling F-60 Tyre Type | item284 | 10 | Nos |
287 | 4.4 | Air cylinder 50 dia 150 stroke double acting pneumatic cylinder | item285 | 2 | Nos |
288 | 4.41 | Main bearing 1216K | item286 | 2 | Nos |
289 | 4.42 | Sleeve H316K | item287 | 2 | Nos |
290 | 4.43 | Pedestal S 516 | item288 | 2 | Nos |
291 | 4.44 | Wood slats Seasoned wood Slat dimension 550x80x30 | item289 | 40 | Nos |
292 | 4.45 | Bolts for fitting the slats | item290 | 40 | Nos |
293 | 4.46 | Chain for the conveyor | item291 | 40 | Nos |
294 | 4.47 | Gear Box Elecon, Model 1044293 | item292 | 1 | Nos |
295 | 4.48 | Motor Siemens, Model E 0708/505840211004, 1.5 K / 2 HP | item293 | 1 | Nos |
296 | 4.49 | Coupling size F-70 | item294 | 2 | Nos |
297 | 4.5 | Drive end bearings SKF ,UKF-209 | item295 | 2 | Nos |
298 | 4.51 | Shaft end bearings SKF ,UKP-209 | item296 | 2 | Nos |
299 | 4.52 | Rotor Shaft Material : End Dia: 40mm Pin rods: MS 10mm dia | item297 | 1 | Nos |
300 | 4.53 | Gear Box Bongfiglioli, AS30 PP90 | item298 | 1 | Nos |
301 | 4.54 | Elevator Bucket 8” -2 Bolt bucket | item299 | 200 | Nos |
302 | 4.55 | Belt Solivator 500 | item300 | 1000 | Nos |
303 | 4.56 | Coupling Direct coupling (size 6018 – Dia 48/Dia45) | item301 | 1 | Nos |
304 | 4.57 | Driven Section Bearing UCF, SKF, F-208 | item302 | 2 | Nos |
305 | 4.58 | Gear Box COUPLING Bongfiglioli, AS45-PP112, 6018 (Dia 48/Dia45) | item303 | 1 | Nos |
306 | 4.59 | Bottom liner Plate UHMWPE 10mm | item304 | 2 | Nos |
307 | 4.6 | Chain cleaning device Brush | item305 | 6 | Nos |
308 | 4.61 | Wear rail TiscRal or eqivalent material | item306 | 12 | Nos |
309 | 4.62 | Side Plate thickness H.R. IS 2062, 5mm, 4mm | item307 | 5 | Nos |
310 | 4.63 | Bottom plateThickness H.R. iS 2062, 5mm | item308 | 5 | Nos |
311 | 4.64 | Bottom wear plate thickness UHMW 10mm | item309 | 5 | Nos |
312 | 4.65 | Top Plate Thickness 3mm | item310 | 5 | Nos |
313 | 4.66 | Sprocket 4” pitch, 7 teeth, 65 Dia. | item311 | 20 | Nos |
314 | 4.67 | Drive section Bearing UCF-NTN UCF-212 | item312 | 1 | Nos |
315 | 4.68 | Driven section Bearing UCF-NTN (UCF-208) | item313 | 1 | Nos |
316 | 4.69 | Gear Box Coupling 6018 (Dia 58/Dia 60) | item314 | 2 | Nos |
317 | 4.7 | Magnet unit SS 304, Min. 6000 Gauss Swing type with pneumatic cylinder | item315 | 4 | Nos |
318 | 4.71 | Main screw pipe Heavy duty ‘c’ class MS ERW pipe, Dia 76- c class | item316 | 2 | Nos |
319 | 4.72 | Drive end bearing SKF, Flange Type ball bearing-FY510 | item317 | 2 | Nos |
320 | 4.73 | Drive shaft bearing EN 24 | item318 | 2 | Nos |
321 | 4.74 | Driven end bearing FY 510 SKF | item319 | 2 | Nos |
322 | 4.75 | Gear Box Bongfiglioli, AS45 PP 112 | item320 | 2 | Nos |
323 | 4.76 | Gear Box Coupling 5018 (Dia 48/Dia 45) | item321 | 2 | Nos |
324 | 4.77 | Connector ¼”-8 | item322 | 1 | Nos |
325 | 4.78 | Solenoid valve MMFH-5-1/4 (Solinoid valve) | item323 | 4 | Nos |
326 | 4.79 | Solenoid Coil MSFW/24-42-50/60 (Solenoid coil) | item324 | 2 | Nos |
327 | 4.8 | SCREW Dischargers Eminence, SC-250, 1.53MX 08 Nos, 1.2MX 4 Nos, Screw Dia. 250 mm | item325 | 3 | Nos |
328 | 4.81 | Main screw pipe Heavy duty ‘c’ class MS ERW pipe, Dia 76-C class | item326 | 2 | Nos |
329 | 4.82 | Gear Box Bongfiglioli Model AS30PP90 | item327 | 1 | Nos |
330 | 4.83 | Gear Box Coupling 5016 (Dia 38/Dia 30) | item328 | 2 | Nos |
331 | 4.84 | Drive shaft bearing EN24 | item329 | 2 | Nos |
332 | 4.85 | End bearing SKF, Flange type ball bearing-F208 | item330 | 2 | Nos |
333 | 4.86 | Coupling Type Simplex chain coupling | item331 | 2 | Nos |
334 | 4.87 | Bearing F-201 TR Make | item332 | 2 | Nos |
335 | 4.88 | Rotor Type Wane Type | item333 | 2 | Nos |
336 | 4.89 | Gear Box PBL, M052236 BGCH 1-1-1A | item334 | 2 | Nos |
337 | 4.9 | Signt Glass details for Airlock Dia- 250 | item335 | 2 | Nos |
338 | 4.91 | Gear Box- Airlock PBL, Model C042045/WGHJA | item336 | 1 | Nos |
339 | 4.92 | Bearing TR, Bearing Model F-205 | item337 | 2 | Nos |
340 | 4.93 | Sieve Perforated, 2 decks | item338 | 1 | Set |
341 | 4.94 | Pressure Switch Alfa, Model PR-9X, Range 2.5-9.5 kg/cm2 | item339 | 2 | Nos |
342 | 4.95 | Pneumatic cylinder Festo, Pneumatic cylinder specification DNC-125-160-PPV-A | item340 | 4 | Nos |
343 | 4.96 | Pneumatic pipe 12 mm, Make of pipe janatics | item341 | 2 | Nos |
344 | 4.97 | Connector ½”-12 mm | item342 | 2 | Nos |
345 | 4.98 | Solenoid valve MFH-5-1/2 | item343 | 4 | Nos |
346 | 4.99 | Solenoid Coil MSFG/24-42 – 50/60 | item344 | 2 | Nos |
347 | 5 | Bottom liner Plate UHMWPE 10mm | item345 | 2 | Nos |
348 | 5.01 | Wear rail Tiscral or equivalent | item346 | 2 | Nos |
349 | 5.02 | Chain Drag bush chain type link – C45/En8D ‘Pin – 18 MnCr5/20MnCr6 | item347 | 2 | Nos |
350 | 5.03 | Drive Bearing UCF-NTN (UCF-212) | item348 | 2 | Nos |
351 | 5.04 | S rocket 4 “pitch. 7 teeth 65 Dia | item349 | 2 | Nos |
352 | 5.05 | Side plate thickness in mm H.R. IS 2062, 5mm, 4mm | item350 | 2 | Nos |
353 | 5.06 | Bottom plate thickness H.R. IS 2062, 5mm | item351 | 2 | Nos |
354 | 5.07 | Bottom wear plate thickness UHMW H.R. IS 2062, 5mm | item352 | 2 | Nos |
355 | 5.08 | Top plate thickness in mm H.R. IS 2062, 3mm | item353 | 2 | Nos |
356 | 5.09 | Intermediate plate thickness H.R. IS 2062 3mm | item354 | 2 | Nos |
357 | 5.1 | Sprocket 4” pitch, 7 teeth, Dia. 65 | item355 | 2 | Nos |
358 | 5.11 | Driven Bearing UCF-NTN (UCF-208) | item356 | 2 | Nos |
359 | 5.12 | Zero Speed sensor (3 Wire) | item357 | 2 | Nos |
360 | 5.13 | Gear Box Bongfiglioli, Model AS 60 DPP112 | item358 | 2 | Nos |
361 | 5.14 | Coupling size 6018 (Dia 58/Dia 60) | item359 | 1 | NO |
362 | 5.15 | Chain Drag bush chain type (Link – c45/En8D ; Pin – 18MnCr5/20MnCr6) | item360 | 2 | Nos |
363 | 5.16 | Bottom liner Plate UHMWPE 10mm | item361 | 2 | Nos |
364 | 5.17 | Wear rail TISCRAL or equivalent material | item362 | 2 | Nos |
365 | 5.18 | Side plate thickness in mm H.R. IS 2062, 5mm, 4mm | item363 | 2 | Nos |
366 | 5.19 | Bottom plate thickness H.R. IS 2062, 5mm | item364 | 2 | Nos |
367 | 5.2 | Bottom wear plate thickness UHMW H.R. IS 2062, 10mm | item365 | 2 | Nos |
368 | 5.21 | Top plate thickness in mm H.R. IS 2062, 3mm | item366 | 2 | Nos |
369 | 5.22 | Intermediate plate thickness H.R. IS 2062, 4mm | item367 | 2 | Nos |
370 | 5.23 | Sprocket 4” pitch, 7 teeth, Dia.65 | item368 | 2 | Nos |
371 | 5.24 | Gear Box Bongfiglioli, Model AS 60 DPP 112 | item369 | 1 | NO |
372 | 5.25 | Coupling size 6018 (Dia 58/Dia60) | item370 | 2 | Nos |
373 | 5.26 | Main body plate ss-304, 4mm Thk | item371 | 50 | Nos |
374 | 5.27 | Conditioner Paddle- ss-304, 6mm Thk | item372 | 50 | Nos |
375 | 5.28 | Doors for cleaning ss-304, 4mm Thk | item373 | 50 | Nos |
376 | 5.29 | Chain conveyor galls 30cm,19cm ¼30x19½ | item374 | 30 | Nos |
377 | 5.3 | Pellet sieve 6x4 Feat ¼180cm x 120 cm ½ (screen size) | item375 | 4 | Nos |
378 | 5.31 | Perforated Sieve for Hammer Mill (FCS-100) (4mm perforation) | item376 | 2 | Nos |
379 | 5.32 | Wire Mesh for pellet sieve 4 mesh | item377 | 1 | Nos |
380 | 5.33 | Acrylic Glass 200 dia x 200 ht. 200 dia x 200 ht (for cyone glass) | item378 | 5 | Nos |
381 | 5.34 | Hammer spacer bush set (20, 48& 58 mm long) | item379 | 5 | Nos |
382 | 5.35 | SUS Front die cover ({pellet mill) (TC M 20 Bolt) | item380 | 1 | Nos |
383 | 5.36 | SUSW SS End Cover (SS-304 construction) | item381 | 1 | Nos |
384 | 5.37 | Roller Shells “V” grooved for above Size 250mm OD 180mm ID (Suitable for bearing no. 32220, 182mm wide | item382 | 10 | Nos |
385 | 6 | NAME OF THE ITEM FOR SHIVPURI | |||
386 | 6.01 | Die 8mm (Alloy Steel) | item383 | 6 | No |
387 | 6.02 | Press Roll Assembly (Gear Type) | item384 | 8 | Nos |
388 | 6.03 | Die Holder Capsule Assemble with T Shaft | item385 | 1 | Set |
389 | 6.04 | Die Holder Rear ring ( Chrome Inside) | item386 | 6 | Nos |
390 | 6.05 | Die Holder Front ring ( Chrome Inside) | item387 | 6 | Nos |
391 | 6.06 | Front Scapper Assemble | item388 | 2 | Nos |
392 | 6.07 | Front Scapper Holding Stud | item389 | 2 | Nos |
393 | 6.08 | Rear Scapper | item390 | 2 | Nos |
394 | 6.09 | SS Angel Needle Valve | item391 | 1 | Nos |
395 | 6.1 | Eccentric Shaft Gear Type | item392 | 4 | Nos |
396 | 6.11 | Press Roll Shell | item393 | 10 | Nos |
397 | 6.12 | Press Roll Cover | item394 | 6 | Nos |
398 | 6.13 | Press Roll Sealing ring | item395 | 6 | Nos |
399 | 6.14 | Press Roll middle ring | item396 | 6 | Nos |
400 | 6.15 | Nut For Eccentric Shaft | item397 | 6 | Nos |
401 | 6.16 | Die Holder Cover Front | item398 | 1 | No |
402 | 6.17 | Die Holder Cover Rear | item399 | 1 | No |
403 | 6.18 | T Shaft | item400 | 1 | No |
404 | 6.19 | Shear Pin | item401 | 100 | Nos |
405 | 6.2 | Counter Soft Pully With Shaft | item402 | 1 | No |
406 | 6.21 | Main Motor Pully (9Groove, Dia. X9SPC) | item403 | 1 | Nos |
407 | 6.22 | Conditional Drive | item404 | 2 | Nos |
408 | 6.23 | V- Belt (SPC 5000) | item405 | 9 | Nos |
409 | 6.24 | Fixing Gear For PRA | item406 | 4 | Nos |
410 | 6.25 | Tyre Coupling F- 110 Dia 065 (18 X 4.4 ) Dia 075 (18 X 4.4 ) | item407 | 2 | Nos |
411 | 6.26 | M Type Beaters 140 X 50 X 6 (1 Set = 64 Nos.)(HAMMER MILL 75 HP) | item408 | 10 | Sets |
412 | 6.27 | Perforated Sieve (1 set = 6 Nos.)(HAMMER MILL 75 HP) | item409 | 3 | Sets |
413 | 6.28 | Beater Holding End Bush with Rod (HAMMER MILL 75 HP) | item410 | 18 | Nos |
414 | 6.29 | Distane Bush (HAMMER MILL 75 HP) | item411 | 120 | Nos |
415 | 6.3 | ALN KEY Bolt (8 mm) (HAMMER MILL 75 HP) | item412 | 120 | Nos |
416 | 6.31 | Sieve Mounting Arrangement With Clamp (HAMMER MILL 75 HP) | item413 | 1 | No |
417 | 6.32 | Tyre Coupling F- 110 Dia 055 (16 X 4.3 )Dia 065 (18 X 4.4 ) (HAMMER MILL 75 HP) | item414 | 2 | Nos |
418 | 6.33 | Elevator Bucket (8" 3 Bolt Bucket) | item415 | 40 | Nos |
419 | 6.34 | Belt (10" Width, 10mm Thickness) | item416 | 300 | Mtr. |
420 | 6.35 | Back Stop | item417 | 3 | Nos |
421 | 6.36 | Elevator Bottom Cage Type Drum With Shaft Assemble | item418 | 4 | Nos |
422 | 6.37 | Elevator Top Cage Type Drum With Shaft Assemble | item419 | 4 | Nos |
423 | 6.38 | Bottom Liner Plate (10 mm) | item420 | 2 | Nos |
424 | 6.39 | Chain Cleaning Device (Brush) | item421 | 4 | Nos |
425 | 6.4 | Wear Rail ( 8 X 20 mm) | item422 | 12 | Nos |
426 | 6.41 | Wear Rail ( 10 X 60 mm) | item423 | 12 | Nos |
427 | 6.42 | Side Pellet Thickness (5 mm, 4 mm) | item424 | 5 | Nos |
428 | 6.43 | Bottom Plate Thickness (5 mm) | item425 | 5 | Nos |
429 | 6.44 | Bottom Wear Plate Thickness (10 mm) | item426 | 5 | Nos |
430 | 6.45 | Screw Conveyor Hanger Bearing (60 Dia.) | item427 | 10 | Nos |
431 | 6.46 | Slate Conveyor Chain | item428 | 10 | Mtr. |
432 | 6.47 | High level/ Low level Sensor For Bins Hopper (KV 5004 KV-3000-BPKG/NI) | item429 | 10 | Nos |
433 | 6.48 | Air Cylinder Bor 63 X 300 For PN Side Gate With Seal Kit | item430 | 3 | Nos |
434 | 6.49 | Air Cylinder Bor 40X 100 For Two Way FlapeWith Seal Kit | item431 | 3 | Nos |
435 | 6.5 | Read Switch For Air Cylinder | item432 | 10 | Nos |
436 | 6.51 | Solenoid Valve 1/4 " BSP 5 Port | item433 | 2 | Nos |
437 | 6.52 | Senser Proximity Type For Rotery Distubutors | item434 | 2 | Nos |
438 | 6.53 | Gear Set For Pallet Mill Conditioner | item435 | 2 | Nos |
439 | 6.54 | Rubber GasKet | item436 | 30 | Mtr. |
440 | 6.55 | Air Cylinder Bor 150mm X 200mm Stroke | item437 | 2 | Nos |
441 | 6.56 | CEE EM 45 Limit Switch (IP- 67) | item438 | 5 | Nos |
442 | 6.57 | Bagging Limit Switch XCKJ.LC (CENLEC EN 50041 IP- 66) | item439 | 2 | Nos |
443 | 6.58 | Pallet Coller Limit Switch BC 9 | item440 | 2 | Nos |
444 | 6.59 | Raddler Chain ( 125mm Pitch X 220 Wide) | item441 | 100 | Mtr. |
445 | 6.6 | Drive Side Spocket 6 T X 125mm PitchBoth side Boss having Bore Key Way with Shaft Assembled | item442 | 3 | Nos |
446 | 6.61 | Non Drive Side Spocket 6 T X 125mm Pitch Both side Boss having Bor Key Way with Shaft Assembled | item443 | 3 | Nos |
447 | 6.62 | Circlip ( Roller assembly for 180 mm ) | item444 | 5 | Nos |
448 | 6.63 | End Bush ( Hammer mill for 8 mm ) | item445 | 5 | Nos |
449 | 6.64 | ASPIRATION UNIT FOR DUMP HOPPER (3 HP - NG90L - 2880 RPM - B5 TYPE) | item446 | 5 | Nos |
450 | 6.65 | INTAKE CHAIN CONVEYOR ( 240 X 400 X 40M LG.) (10 HP - NG132ML - 1440 RPM - B5 TYPE) | item447 | 1 | NO |
451 | 6.66 | CROSS CHAIN CONVEYOR ( 240 X 400 X 30M LG.) (7.5 HP - NG132S - 1440 RPM - B5 TYPE) | item448 | 1 | NO |
452 | 6.67 | INTAKE ELEVATOR - 8" (27M LG.) (7.5 HP - NG132S - 1440 RPM - B5 TYPE) | item449 | 1 | NO |
453 | 6.68 | JUTE REMOVER - 250 X 500 (2 HP - NG90L - 1440 RPM - B5 TYPE) | item450 | 1 | NO |
454 | 6.69 | CROSS SCREW CONVEYOR - (Ø305 X 305X 5.5 M LG.) (3 HP - NG100L - 1440 RPM - B5 TYPE) | item451 | 1 | NO |
455 | 6.7 | DISTRIBUTION SCREW CONVEYOR - (Ø305 X 305X 9 M LG.) (5 HP - NG112M - 1440 RPM - B5 TYPE) | item452 | 3 | Nos |
456 | 6.71 | SCREW DISCHARGER - (Ø250 X 4.4M LG. & 4.8M LG.) - SET1 (5 HP - NG112M - 1440 RPM - B5 TYPE) | item453 | 4 | Nos |
457 | 6.72 | SCREW DISCHARGER (Ø250 X 1.5, 1.8, 2.7 & 2.9M LG.) - SET2 (3 HP - NG100L - 1440 RPM - B5 TYPE) | item454 | 8 | Nos |
458 | 6.73 | BATCH CHAIN CONVEYOR ( 240 X 400 X 5.8M LG.) (3 HP - NG100L - 1440 RPM - B5 TYPE) | item455 | 1 | NO |
459 | 6.74 | BATCH ELEVATOR - 8" (12.1M LG.) (5 HP - NG112M - 1440 RPM - B5 TYPE) | item456 | 1 | NO |
460 | 6.75 | ROTARY FEEDER FOR HAMMER MILL (1 HP - ELCEN MAKE - 1440 RPM - B5 TYPE) | item457 | 1 | NO |
461 | 6.76 | HAMMER MILL - FCHM 7560 (60 HP - ND225M - 2880 RPM - B3 TYPE) | item458 | 1 | NO |
462 | 6.77 | ASPIRATION UNIT FOR HAMMER MILL (5 HP - NG100L - 2880 RPM - B5 TYPE) | item459 | 1 | NO |
463 | 6.78 | POWDER CHAIN CONVEYOR ( 240 X 400 X 5M LG.) (3 HP - NG100L - 1440 RPM - B5 TYPE) | item460 | 1 | NO |
464 | 6.79 | POWDER ELEVATOR - 8" (15M LG.) (5 HP - NG112M - 1440 RPM - B5 TYPE) | item461 | 1 | NO |
465 | 6.8 | BATCH MIXER - 1 TON (RIBBON TYPE) (20 HP - ND160L - 1440 RPM - B3 TYPE) | item462 | 1 | NO |
466 | 6.81 | CHAIN CONVEYOR B.H.B.B.M ( 240 X 400 X 4M LG.) (3 HP - NG100L - 1440 RPM - B5 TYPE) | item463 | 1 | NO |
467 | 6.82 | MIX FEED ELEVATOR - 8" (24.6M LG.) (7.5 HP - NG1325 - 1440 RPM - B5 TYPE) | item464 | 1 | NO |
468 | 6.83 | FEEDER FOR PELLET MILL (5 HP - ELCENMAKE - 2880 RPM - B5 TYPE) | item465 | 1 | NO |
469 | 6.84 | TWIN ROTOR MOLASSES MIXER -650X2000 LG. (15 HP - ND160M - 1440 RPM - B5 TYPE) | item466 | 1 | NO |
470 | 6.85 | MOLASSES DOSING PUMP (3 HP - NG100L - 1440 RPM - B3 TYPE) | item467 | 1 | NO |
471 | 6.86 | MOLASSES FEEDING PUMP / TRANSFER PUMP (2 HP - NG90L - 1440 RPM - B3 TYPE) | item468 | 1 | NO |
472 | 6.87 | TWIN PADDLE CONDITIONER R-150x2000 (7.5 HP - NG1325L - 1440 RPM - B3 TYPE) | item469 | 1 | NO |
473 | 6.88 | PELLET MILL - SUPER SENIOR (120 HP - ND280M - 1440 RPM - B5 TYPE) | item470 | 1 | NO |
474 | 6.89 | INLET FEEDER FOR PELLET COOLER -1919 (1.5 HP - NG90S - 1440 RPM - B5 TYPE) | item471 | 1 | NO |
475 | 6.9 | PELLET COOLER - 1919 (3 HP - ELCEN MAKE - 1440 RPM - B5 TYPE) | item472 | 1 | NO |
476 | 6.91 | PELLET CHAIN CONVEYOR ( 240 X 400 X 4.5M LG.) (3 HP - NG100L - 1440 RPM - B5 TYPE) | item473 | 1 | NO |
477 | 6.92 | PELLET ELEVATOR - 8" (18M LG.) (5 HP - NG112M - 1440 RPM - B5 TYPE) | item474 | 1 | NO |
478 | 6.93 | PELLET COOLER BLOWER (25 HP - ND180M - 1440 RPM - B3 TYPE) | item475 | 1 | NO |
479 | 6.94 | PC AIR LOCK - DIA 200 ( RICON MAKE ) (1 HP - NG80 - 1440 RPM - B5 TYPE) | item476 | 1 | NO |
480 | 6.95 | SLAT CONVEYOR - 3" (14 M) (3 HP - NG100L - 1440 RPM - B5 TYPE) | item477 | 1 | NO |
481 | 6.96 | ASPIRATION SYSTEM - PW BINS (7.5 HP - NG1325 - 2880 RPM - B3 TYPE) | item478 | 1 | NO |
482 | 6.97 | AIR LOCK - DIA 200 ( RICON MAKE ) (1 HP - NG80 - 1440 RPM - B5 TYPE) | item479 | 1 | NO |
483 | 6.98 | ASPIRATION UNIT FOR ELEVATORS (1 HP - NG80 - 2880 RPM - B5 TYPE) | item480 | 5 | Nos |
484 | 6.99 | AIR COMPRESSOR (20 HP - NG160L - 1440 RPM - B3 TYPE) | item481 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail