| 1 | 1 | Concrete | BI01010001010000000000000515BI0100001113 | | |
|---|
| 2 | 1.001 | od931661/2020_2021 : Providing concrete for plain/reinforced concrete in open foundation complete as per drawings and technical specification clause 802,803,1202&1203 P.C.C grade M10<br>(1)Nominal mix 1:4:8 | BI01010001010000000000000515BI0100001114 | 9.33 | cum |
|---|
| 3 | 1.002 | od983125/2020_2021 : Providing concrete for plain /reinforced concrete in open foundation completes as per drawing and technical specification clause 802,803,1202&1203 P.C.C Grade M 20 (1:2:4)<br>(1) Nominal mix | BI01010001010000000000000515BI0100001115 | 9.33 | cum |
|---|
| 4 | 1.003 | 3.15.2 : Compacting Original Ground<br>\n(ii) Compacting original ground supporting subgrade<br>\nLoosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2. | BI01010001010000000000000515BI0100001116 | 27.99 | cum |
|---|
| 5 | 2 | TARRING -WIDENING AND RETARRING | BI01010001010000000000000515BI0100001117 | | |
|---|
| 6 | 2.001 | 3.5.1 : Excavation in Cutting in Soil by manual means with lead upto 50 mExcavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 | BI01010001010000000000000515BI0100001118 | 237.5 | cum |
|---|
| 7 | 2.002 | 3.5.3 : Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 mExcavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 | BI01010001010000000000000515BI0100001119 | 330 | cum |
|---|
| 8 | 2.003 | 5.5.B.2a : Modified Penetration Macadam 75 mm thick using Bitumen S-65\t<br>\t\t\nConstruction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.\t<br>\t\t\t\t\t\t\t\n(B)\t75 mm thick\t\t:-\t\t\t\t\t\n(II)\tBitumen (S-65) | BI01010001010000000000000515BI0100001120 | 32.055 | sqm |
|---|
| 9 | 2.004 | 4.11.2 : Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. <br>(ii)\tUsing Gravel mix soil. | BI01010001010000000000000515BI0100001121 | 95 | cum |
|---|
| 10 | 2.005 | 4.9 : Wet Mix Macadam\t<br>\t\t\nProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.\t\t<br>\t\nBy Mechanical Means with 1 km lead | BI01010001010000000000000515BI0100001122 | 142.5 | cum |
|---|
| 11 | 2.006 | 5.1.1a : Prime Coat :-\t\t\t\t\t\nLow porosity\t<br>\t\t\t\t\t\t\t\n\tProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 | BI01010001010000000000000515BI0100001123 | 950 | sqm |
|---|
| 12 | 2.007 | 5.2.3a : Tack Coat <br>Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. | BI01010001010000000000000515BI0100001124 | 950 | sqm |
|---|
| 13 | 2.008 | 5.2.1a : Tack Coat<br>\nProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | BI01010001010000000000000515BI0100001125 | 270 | sqm |
|---|
| 14 | 2.009 | 75.5.9.2.2.Pa : Plastic Roads - Bitumen S-65 <br>\n20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder\t<br>\nProviding, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 (with 7% of bitumen replaced by shredded waste plastic)\t<br>\nCase - I By Manual Means\t<br>\n(II)\tBitumen (S-65) (VG - 30) | BI01010001010000000000000515BI0100001126 | 1220 | sqm |
|---|
| 15 | 2.01 | 5.12.A.3.2a : Seal Coat - Manual Means - Type C - Bitumen S-65\t\t<br>\t\t\t\t\t\t\nProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510\t\t<br>\t\t\t\t\t\t\nA.\tBy Manual Means\t:-\t\t\t\t\t\t\nCase - III : Type C\t<br>\t\t\t\t\t\t\t\n(II)\tBitumen (S-65) | BI01010001010000000000000515BI0100001127 | 1220 | sqm |
|---|
| 16 | 2.011 | 3.19.1.B : Surface Drains in SoilConstruction of unlined surface drains of average cross-sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307.(B)Mechanical Means | BI01010001010000000000000515BI0100001128 | 300 | metre |
|---|
| 17 | 3 | DRAINAGE | BI01010001010000000000000515BI0100001129 | | |
|---|
| 18 | 3.001 | 3.5.1 : Excavation in Cutting in Soil by manual means with lead upto 50 mExcavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 | BI01010001010000000000000515BI0100001130 | 159.5 | cum |
|---|
| 19 | 3.002 | od931661/2020_2021 : Providing concrete for plain/reinforced concrete in open foundation complete as per drawings and technical specification clause 802,803,1202&1203 P.C.C grade M10<br>(1)Nominal mix 1:4:8 | BI01010001010000000000000515BI0100001131 | 22.925 | cum |
|---|
| 20 | 3.003 | od983125/2020_2021 : Providing concrete for plain /reinforced concrete in open foundation completes as per drawing and technical specification clause 802,803,1202&1203 P.C.C Grade M 20 (1:2:4)<br>(1) Nominal mix | BI01010001010000000000000515BI0100001132 | 6.375 | cum |
|---|
| 21 | 3.004 | 11.4.2.1 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 II.P.C.C grade M 15(i)Nominal mix (1:2.5:5) | BI01010001010000000000000515BI0100001133 | 51.15 | cum |
|---|
| 22 | 3.005 | 13.1.2 : Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5R.C.C M 25 | BI01010001010000000000000515BI0100001134 | 3.68 | cum |
|---|
| 23 | 3.006 | 11.8 : Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 | BI01010001010000000000000515BI0100001135 | 0.27 | tonne |
|---|
